Combine 2 computers ea with GPIB-USB-HS connected to different calibrators into one system

I’ve got 2 separate systems: Computer A fitted with a GPIB-USB_HS+ controller and connected to a calibrator A and bench multimeter A, and Computer B fitted with a GPIB-USB_HS+ controller and connected to calibrator B and bench multimeter B. To enable computer A to gain access to calibrator B and bench multimeter B (and visa versa) I want to interconnect the 2 systems with a GPIB cable. Will it work?

Since there can only be one CIC, you just can't connect the cables. Your software on both pc's will have to detect if the other program is running and make the controller on the non-running pc not to be CIC.
Your other option is to remotely control the other pc's instruments with VISA Server if there is a network connection. You would still need some means of checking if a program is running on the other pc.

Similar Messages

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
B-rock

Creating exe with GPIB-USB

When I create an application that uses my GPIB-USB-A interface it is not included as one of the VISA selections when the application is installed. Which files do I have to add to application installation to have my application work with GPIB-USB?

You would need to install the GPIB and VISA driver,
For GPIB, follow the steps from www.ni.com/support/install. You can download the latest visa driver from, ftp://ftp.ni.com/support/visa/drivers/

Using Time MACHINE with a USB drive connected to an Airport Extreme

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Please click here:
|
Using Time Machine with an Airport Extreme AirDisk
|
Note: If you got here by clicking a link that looks like this:
_. . . discussions.apple.com/thread.jspa?threadID=2299608#Q1_
Note the number at the end, after the +*pound sign,+* (#) and click the corresponding item below:
Please pardon the inconvenience.
|
QUESTIONS
*Q1. Can I use the USB drive(s) for Time Machine backups AND other data?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Airport Extreme?*
*Q3. How do I delete backups?*
*Q4. How do I back-up my backups?*
If you don't see your question here, try Time Machine - Frequently Asked Questions.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try Time Machine - Troubleshooting
This is the 3rd version of this tip. It was submitted on May 16, 2010 by Pondini.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Hi, Nubz!
Yes, I just saw that, and am still chuckling.
Maybe that will mollify the Jive gods?
Thanks again,
Jim

Setting up a DS345 with GPIB-USB-HS

Quick guide to how to set up a Stanford Research Systems (SRS) DS345 synthesized function generator.
1) Ensure you're not going to shock anything (i.e. having the computer and device on two different grounds), then plug in the GPIB-USB-HS cable to device.
2) On the front panel of the DS345 set gpib to on (address default should be 19).
3) Open NI's Measurement and Automation Explorer, and ensure the device shows up.
4) Open NIvisaic.exe and send a query "*IDN?\n". You should get the device info back.
5) Using NIvisaic, write "FUNC\s1\n" this should change the function type generated to Square Wave type.
6) Use Labviews VISA library. For still unknown reasons, I could not get the normal GPIB library to control the DS345 over GPIB-USB-HS. This means the entire driver library for the DS345 didn't work for me. This means you'll have to do some more work learning the DS345's communication protocol (see http://www.thinksrs.com/downloads/PDFs/Manuals/DS345m.pdf). But I only needed to change 2 things on the DS345 so that fit my needs.

Quick guide to how to set up a Stanford Research Systems (SRS) DS345 synthesized function generator.
1) Ensure you're not going to shock anything (i.e. having the computer and device on two different grounds), then plug in the GPIB-USB-HS cable to device.
2) On the front panel of the DS345 set gpib to on (address default should be 19).
3) Open NI's Measurement and Automation Explorer, and ensure the device shows up.
4) Open NIvisaic.exe and send a query "*IDN?\n". You should get the device info back.
5) Using NIvisaic, write "FUNC\s1\n" this should change the function type generated to Square Wave type.
6) Use Labviews VISA library. For still unknown reasons, I could not get the normal GPIB library to control the DS345 over GPIB-USB-HS. This means the entire driver library for the DS345 didn't work for me. This means you'll have to do some more work learning the DS345's communication protocol (see http://www.thinksrs.com/downloads/PDFs/Manuals/DS345m.pdf). But I only needed to change 2 things on the DS345 so that fit my needs.

How do I combine two different libraries into one?

I have three devices, one iphone and two ipods. How can I combine all three libraries into one single library. Is this possible?

Choose the library connected to the iPhone, import the media content from the other one/two libraries. DeDupe.
I've written a script called DeDuper which can help with the last bit. See this thread for background.
tt2

Combine different artists into one album

I just downloaded O Brother, Where Art Tho? into my library. Each song is by a different artist and I want to combine all into one album. Same with Eric Clapton. He did one song with Blind Faith, one with Cream, etc and I want them all under 'The Cream of Eric Clapton' not under each group. How can this be done?

Is this in iTunes?
There is a separate discussion group for iTunes.
In iTunes, select the album and Get Info.
Check the box that says, "Compilation".
The album will show under the artist heading "Compilations".

In I-Tunes, how can I consolidate multiple copies of the same album with different tracks into one file in my library screen?

In Windows 7 , I tunes library/ albums, I have many albums ( all the same) with different tracks in each.
Is it possible to consolidate the multiple cover photos into one ?

Generally setting a common Album Artist will fix things, if not see Grouping tracks into albums.
tt2

How can I combine to different projects into one project?

I would like to combine various projets into one project is the possible.

Hello Tom,
I have tried to copy and paste the two projects, both in the project library and in the timeline. In the timeline the paste option is not highlighted and paste does not work. In the project library I highlighted the project and copied the project, but I was unable to paste into the other project. Is this done in the project library? The paste option is hightlight but each time I paste it does not work.
Thanks for your help

How to combine images from several different shoots into one

Have LR 3.6 for Win xp.
I have 4 differernt photo shoots that I want to combine into one big single catalogue. I want to be able to rank and choose images from all 4 shoots at the same time so I can get the best ones identified.
Each shoot is already in its separate catalogue but I cant figure out how to get all 4 shoots to show up at once so I can rank the best shots and maybe even make a collection of my best images from the 4 shoots.
How might I do this??
Thanks Suzzie

My primary suggestion is that you watch the many videos by Julianne Kost provided in the Adobe site about organizing in the Library Module in LR 4, or read one of the many good LR books. If you want to venture on your own here's a very shorthand description of one of many ways to do what you want. Choose which Catalog you want to use. Open that Catalog and choose "Import from Another Catalog" under the File Menu in the Library Module. Select the images and import them to your chosen main catalog. Once all are in the same Catalog either Keyword all similar images you wish to compare, or make separate Collections of each one. Use the Compare function in the Library ("c" key) and eliminate the one you don't want. Unless you have one client viewing your images in LR and you don't want them to see that you have other images for other clients, I would suggest you use only a single catalog from here on out.

P67A-GD65 (B3) will not boot with external USB DVD connected.

Damnedest thing... just put the build together last night and this was the biggest issue. If I connect my external Samsung USB DVD RW the system stops booting and only displays (B3) in the bottom right corner of my display. If I remove the USB plug the system boots and operates normally. If I connect it to the USB port after boot the system recognizes it and it works fine. The same issue occurs no matter which USB2/3 port I plug it into. I've banged around the BIOS and cannot see any issues in the boot sequence that would indicate an issue. Anyone else in das same boot?

Quote from: cadhopper on 24-March-11, 07:19:08
I just came to the forum for the same reason. I'm glad you had a thread already going. Mine is a Seagate 1.5T USB 2.0 hard drive and the screen reads 98 in the lower right corner. Hopefully MSI will get this fixed soon. Other than that the new system is running great.
They are working on it. They sent me a BETA BIOS to try out. The BIOS v1.10B3 was dated 3-17-2011 and it nearly bricked my system though. Here is the response I sent to them the other night after a few hours with a massive headache trying to bring my system back up:
Quote
Tried the new BIOS. While it did indeed fix the USB DVD boot issue and let me boot into windows it created a few new issues. After flashing the new BIOS would not recognize my old overclocking profiles from the v1.8 BIOS.. "hole" error. So I manually adjusted all the settings and saved the new settings. I copied them EXACTLY from my previous settings.. I had screenshots which I had printed out as a fool-proof guide. After rebooting I could no longer get into windows. BSOD. If I tried entering the BIOS by tapping the DEL button while booting the system would freeze at the "entering setup...." screen and never progress into the actual BIOS. I unplugged the power, waited a few minutes and held the clear CMOS button on the back panel down for a few seconds. After rebooting I no longer had video output. After much trial and error I ended up having to also unplug my LCD and cycle power on it as well to get video back. But could still bot get into the BIOS by tapping the DEL key during boot. Luckily I have a laptop with all the files on it and I was able to finally re-flash back to the v1.8 BIOS from a USB drive. I'm not sure what exactly you changed.. but I don't think this new BIOS version should leave BETA status.
To their credit they promptly responded the next AM:
Quote
There were some changes to the CPU voltage, so your overclock settings may not work properly. We are still working on a 1.A release version. It will be updated to our website soon. http://www.msi.com/product/mb/P67A-GD65--B3-.html#/?div=BIOS
I only wish they had informed me of the changes to the CPU voltage up front or included a change log so I could have made an informed decision as to whether or not I wanted to try the BETA BIOS. I was under the impression (mistakenly) that it simply addressed the USB DVD issue. I'll wait for the new release BIOS. I can live without the external USB DVD being plugged in at boot. Bricking my MOBO and having to RMA would be a far less desirable outcome. :p That said.. I'd still recommend this MOBO. It has relatively few issues and MSI support is responsive so far.

USB disk connected to TC shows on one Mac, but not the other

Hi guys!
The Time Capsule works just great! I'm running it bridged in my existing network, with WiFi turned off.
And the USB disk shows fine on my Mac, but not on my colleagues' Mac. TC shows on both. What am I missing here?
The USB disk will serve as "file server" and will be backed up onto TC together with the macs.
Update: Whoa - now it suddenly shows up on both machines. Go figure.
Message was edited by: Niklas Wikman

Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on.

Problem with external USB keyboard layout that differes to the macbook one

I have a MacBook with a US keyboard layout and attached to an older (pre aluminium) japanese keyboard. As long as I stick in the normal mode (eg not japanese input) all keys work as they should. But if I switch to japanese input, the keyboard also switches to japanese input.
I suspect it is because in the Kotoeri Preferences under "Keyboard layout for Romaji" is US selected. But from this dropdown I cannot choose any japanese layout.
How can I fix this? This is really annoying, all the time when I input some japanese text and want to use any of the other characters (eg & or %, etc) I need to use the keyboard on the Laptop because else I do not get the correct characters.

Tom Gewecke wrote:
I suspect it is because in the Kotoeri Preferences under "Keyboard layout for Romaji" is US selected. But from this dropdown I cannot choose any japanese layout.
I don't think that matters -- the point of this preference is to allow correct Hiragana input by people using non-US latin keyboards.
Yeah, neither do I ... but somehow os x doesn't see the correct keyboard layout once I switch to japanese input.
How can I fix this? This is really annoying, all the time when I input some japanese text and want to use any of the other characters (eg & or %, etc) I need to use the keyboard on the Laptop because else I do not get the correct characters.
Is it not possible using the JIS Japanese keyboard to make & and %? I see them for example on this picture of one.
If I view the keyboard viewer I see the correct japanese layout, but if I want to type the keys as shown there I get the input like on the US layout on the keyboard in the laptop.
eg shift+6 = &, but on us you get ^. so when I am in normal input I get the &, but if I switch to japanese input I get the ^. And this is really annoying, especially some keys "disappear". the ¥ (yen/backslash key) just doesn't work at all in japanese input.

Unable to add a mail account, with Invalid Password error message, yet can log into mail system OK through a browser. Mail technicians can't find the problem.

When I try to add a newly-created Bigpond account to Thunderbird, I get an error message "User Name or Password Invalid", yet I can log in to this account OK through a browser. When adding the account, Thunderbird says "Configuration found in Mozilla ISP database". I have previously successfully added Bigpond, Yahoo, Outlook and Hotmail accounts to Thunderbird and they are working fine. The Bigpond Technical Support staff have looked into this and cannot see what is wrong but they say they do not support Thunderbird. Any ideas appreciated...

Thanks. I had tried the auto and manual setups with the same result. IN addition, the Bigpond Support sent me the following which I also tried and got the same result.
For the settings that needs to be configured for your new mailbox, kindly follow the steps listed below:
(**Note: Please be advised that BigPond technical support team is only trained for Microsoft mail clients like Outlook Express, windows Live mail and the like. Having said this, we can only provide limited assistance in setting up your email account for your Thunderbird mail client by providing the correct settings that need to be configured.)
For IMAP server settings:
Account Type: IMAP
Incoming IMAP server: imap-mail.outlook.com
Incoming IMAP mail: port 993
Outgoing SMTP server: smtp-mail.outlook.com
Outgoing SMTP port: 587 (with TLS [preferred] or SSL Encryption depending on your e mail app)
Incoming uses SSL: On (this is required)
Outgoing uses SSL: On (this is required) (with TLS [preferred] or SSL Encryption depending on your e mail app)
Authentication Outgoing server (SMTP) authentication: Same as incoming mail server
For POP server settings:
Please be advised that before setting up your email account on an email client using a POP mail server, we will need to ensure first that 'Connecting devices and apps with POP' has been enabled through webmail. For instructions on how to do this, kindly follow the steps below:
- Log In your email account from the BigPond website from the Webmail section located at the top left side of the BigPond home page (http://media.telstra.com.au/home.html).
- The page then will automatically redirect to an Outlook website in which you will need to click the 'settings icon' (a gear like icon) located at the top left side of the page.
- From the drop down list, click on 'Options'.
- It will then direct the page to a new page where you will need to click 'Connect devices and apps with POP' under the Managing your account section.
- Choose 'Enable' and choose "Do what the device or app says—if it's set to delete messages, delete them." under Deleting downloaded messages.
- Click on the 'Save' button to save the changes.
- Log out of from your webmail page and start setting up your email client on your mail client using the following setting below:
Account Type: POP3
Incoming POP server: pop-mail.outlook.com
Incoming POP mail: port 995
Outgoing SMTP server: smtp-mail.outlook.com
Outgoing SMTP port: 587 (with TLS [preferred] or SSL Encryption depending on your e mail app)
Incoming uses SSL: On (this is required)
Outgoing uses SSL: On (this is required) (with TLS [preferred] or SSL Encryption depending on your e mail app)
Authentication Outgoing server (SMTP) authentication: Same as incoming mail server
In looking at the Thunderbird error message, it seems to consistently refer to the User Name and Password. I know they are correct, as I can log in from a browser using them. Is there something in the validation rules that might be the problem? Also, you may be aware that Bigpond is migrating their old Webmail system across to the Outlook platform. Registering new e-mail accounts in Bigpond get created on the Outlook platform, whereas older accounts are still on the Bigpond Webmail system. Is this causing a problem somewhere in validation?

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

Combine 2 computers ea with GPIB-USB-HS connected to different calibrators into one system

Similar Messages

Maybe you are looking for