Combine 2 PDF's with a Batch file?

Hello Community,
this is my first post, so please be patient with me - and sorry for my bad english.
i want to edit and comine 2 pdf files automatically with an batch file or something else.
i already have 2 pdf files, a delivery tracking label and a delivery ticket.
the delivery label from the first pdf should place in the second pdf at the top.
afer the process they should generate a third pdf an delete the other 2 pdfs.
is that possible with an batch or vbs or something else?
thank u in front - at the bottom in this post there is a link to the 3 pdf files.
the delivery label
the delivery ticket
and the final pdf
Directory Listing of /development/
best reguards
m.s

Are this diferent documents? What version of Adobe Reader?

Similar Messages

  • Opening 2 PDF's with the same file name

    I have someone who has difficulty opening two PDF's with the same file name. They had a file open, then try to open another PDF document with the same file name as the original document, however it will not open (and no error displays) and reverts back to the "old" document. Any ideas?

    Are this diferent documents? What version of Adobe Reader?

  • Installing CuciMOC with a Batch File

    I'm trying to get this thing to install with a batch file and Altiris.  What switches did you guys use on the msi?  What switches did you use on the exe?  Which would you use the msi or the exe? Why?
    Thanks in advance!  I'm a batch file n00b. 

    We lost our steam on this project because some other things came up.  I'll post what
    we had before we stopped working on it:
    echo Install Dot Net 3.5 SP1
    "Z:\Software\Microsoft\Dot NET\3.5\dotnetfx35_SP1_Full.exe" /q /c: "install /l /qb"
    echo Killing MS Outlook and OCS Communicator
    taskkill /IM "iexplore.exe" /F
    taskkill /IM "outlook.exe" /F
    taskkill /IM "communicator.exe" /F
    echo Copying CuciMoc
    xcopy "Z:\Software\Cisco\CuciMoc\cucimoc-Install-ffr.7-1-3a\CiscoUCIntegrationTMforMicrosoftOfficeCommunicatorK9.msi" "C:\IT\CuciMOC\" /I
    echo Installing CuciMoc
    "C:\IT\CuciMOC\CiscoUCIntegrationTMforMicrosoftOfficeCommunicatorK9.msi" /qn
    echo CuciMOC is installed
    ****From what the other guy said it doesn't install correct in our environment.  The install goes through then when you log in as admin it says that ocs must be closed, then you close it and it says it needs to be running and fails.  Haven't looked into it any further yet. Maybe the above will help for you.

  • Sqlplus commands from withing the batch files

    Hi,
    Oracle9.2
    need to execute the sqlplus commands from withing the batch files without calling the .sql file separately . How it can be done ?
    With Regards

    Hi,
    I agree with you...but as per your solution, after all you are calling the .sql file while connecting the sqlplus which I know already and I don't want to execute the sql commands like that as shown below.
    For example:
    for shut down the database and starting it again .sql files will be called as shown below
    Note: shutdown.sql file will contain simple database shutdown command.
    sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\shutdown_db.sql
    and again for restarting the db i will perform as below
    sqlplus -s "sys/%password%@%tnsname% as sysdba" @D:\start_db.sql
    But I want to get it executed directly from the DOS batch file.
    The thing is I want to execute this both the above database commands from the batch file itself without calling the .sql files separately as shown above.
    is it possible, so how it can be done ?
    Regards
    Edited by: user640001 on Feb 9, 2011 9:53 PM

  • Is it possible to combine pdfs from software containing the file by dragging and dropping them?

    We have a piece of software that we profile PDF files into it and then have a need to combine those PDFs into one file.  Is it possible to just drag and drop from the software into the combine files area?  I know if you open the files first, you can do that or if you save the documents locally, then you can combine them.  It would be ideal to just select the files in the software, then drag and drop them into the combine pdf window.  We are using Adobe Pro XI.

    Hi Hawk2000,
    The workflow you are talking about is very much possible with Acrobat and a good example is Microsoft Outlook from which we can select multiple e-mails and simply drag into Acrobat combine dialog box for combining.
    What happens when you drag files from you software? Is it public software?
    Can we test your software?
    Regards,
    Anoop

  • Combining PDF Forms with global elements

    Hello all,
    I have a bit of a problem with combining .pdf forms into a package. I was hoping that I could convert word documents into .pdf format, then convert them into forms using global bindings for basic information in the forms such as customer name and address. The problem is I would like to package the forms as required since all situations are not alike, and have the global bindings work within a package. Unfortunately it seems the only way global bindings work is within the same form unless you convert a word document into .pdf and combine the files into a single .pdf before you convert it into a form. Does anyone have a solution to my problem?

    Basically you have to lay the whole thing out in LiveCycle.
    I've done it by using the Replace Artwork (under the Edit menu) command on an existing form and selecting a pdf that has all the pages I need in it. Then you have to move the existing fields in your LC form to the proper pages.
    Or, put together a pdf with all the pages, bring that into LC as a new form and then copy/paste your existing fields to where you need them.
    I don't know if there's a better method hopefully someone else has some ideas. It would be a nice feature in a future version of LC to be able to add pages to an existing form.

  • Email PDF along with upload of files

    I have a PDF form that the user will complete. On that form I have a submit button that submits the data to a JSP page that creates the PDF data into a FDF file on the server. I can create an email and attach that file and send it with no problem.
    My issue is that I need to let the users be able to attach more files to this email after they complete the PDF Form. How can I best accomplish this?
    Your suggestions are greatly appreciated.
    ~Tracey

    Add one or multiple file upload in your form. Then parse uploaded file(s) and attach them to your email.
    For upload you could try UploadBean :
    http://www.javazoom.net/jzservlets/uploadbean/uploadbean.html
    For attachment sample see UploadBean add-ons :
    http://www.javazoom.net/jzservlets/uploadbean/uploadbeantools.html
    (See notifyMe).

  • Filling PDF Form with XML data file

    Hello everybody.
    I need help.
    I created a form with LiveCycle Designer. I filled it and generated a XML data files. Now, I would like to fill the same blank PDF form with this XML data file.
    I know that I can do it with Adobe 8.0 but I must do it in an C# / .NET application that I have to create.
    (Forms I'm creating are not for me, I create the forms. Client uses them form but he don't have Adobe Acrobat 8.0, so he can't realise the automatic PDF filling with Adobe Acrobat 8.0)
    So I am looking for help with ".NET" "COM" or other library to help me to do it. If someone has other idea just give it.
    Thanks for your reply
    Jean Pierre (sorry for my bad English)

    Hello Mike
    Thank's for your reply. I used XPAAJ and it works very well but my company his develloping software with C# langage.
    I tried to convert XPPAJ to C#, I did it with the Java Langage Conversion Assistant but "Adobe Library" included in jar files cannot be translated to C#/.NET library. So, I can't use it.
    I found some C#/.NET API on the NET but they are very expensive and my company don't want to pay. They want me to create my own solution with library given by Adobe when you buy Adobe 8. So I am looking for this library.
    Is there an Adobe LiveCycle Designer SDK to help me.
    Thank you in advance for your reply
    Jean Pierre (student developing with LiveCycle Designer)

  • RUNAS another user: assistance with my batch file for control panel and explorer

    Hello, for desktop support on end user or multi/generic user pcs it is nice to access common commands quickly from a batch file to run under your account. In xp both explorer and control panel apps launched without issues. The primary issue for explorer
    is it appears to ignore the runas command (but the user has permissions to explorer so no error) while the control panel apps ignores run as well but does not have permissions so generates an error. The other commands all execute as the attempting admin's
    account.
    who it is for: the user with the admin account to execute on the user's desktop whom is a nonadmin
    **please note, the commands appear to work if you do have admin rights**, the logged in user does not  have admin rights to these utilities like in a common corporate environment.
    "windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item."
    Issue#1:
    With win7 if you do a run as for explorer.exe via batch it will open, but will still be running under the signed in user. I have searched many threads on various sites and have not found a working solution for batch, this may be something I need to retire.
    Issue#2: all control panel applets fail to launch through various methods.
    SECTIONS THAT I AM STRUGGLING WITH:
    runas /user:%auser%@DOMAINNAME "explorer.exe /separate"
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl"
    "cmd /c start appwiz.cpl" also fails
    alternative also fails:
    runas /user:%auser%@chwi "cmd /c Start /B control.exe"
    cls
    @ECHO OFF
    set /p auser= Enter your account login id:
    :MyMenu
    CLS
    Echo Use the options below to run as with your admin account id:
    echo.
    ECHO 1 - Explorer C:\ - may not work with win7
    ECHO 2 - Device Manager
    ECHO 3 - Event Viewer
    ECHO 4 - Services
    ECHO 5 - Computer Management
    ECHO 6 - REGEDIT
    ECHO 7 - Command prompt
    ECHO 8 - Local Users and Groups
    echo 9 - launch task manager
    ECHO a - Control Panel - may not work with win7
    Echo b - Add/Remove programs - may not work with win7
    Echo 0 - Exit
    echo.
    SET /P OPT=Please make a selection, and press enter:
    if %OPT%==1 GOTO OPTION1
    if %OPT%==2 GOTO OPTION2
    if %OPT%==3 GOTO OPTION3
    if %OPT%==4 GOTO OPTION4
    if %OPT%==5 GOTO OPTION5
    if %OPT%==6 GOTO OPTION6
    if %OPT%==7 GOTO OPTION7
    if %OPT%==8 GOTO OPTION8
    if %OPT%==9 GOTO OPTION9
    if %OPT%==a GOTO OPTIONa
    if %OPT%==b GOTO OPTIONb
    GOTO exit
    :OPTION1
    ECHO Executing Explorer C: window
    echo.
    runas /user:%auser%@DOMAINNAME "explorer.exe /separate"
    GOTO:mymenu
    :OPTION2
    ECHO Executing Device Manager
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B devmgmt.msc"
    GOTO:mymenu
    :OPTION3
    ECHO Executing Event Viewer
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B eventvwr.msc"
    GOTO:mymenu
    :OPTION4
    ECHO Executing Services
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B services.msc"
    GOTO:mymenu
    :OPTION5
    ECHO Executing Computer Management
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B compmgmt.msc"
    GOTO:mymenu
    :OPTION6
    ECHO Executing regedit
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B regedit"
    GOTO:mymenu
    :OPTION7
    ECHO Executing command prompt
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B cmd"
    GOTO:mymenu
    :OPTION8
    ECHO Executing Local Users and Groups
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B lusrmgr.msc"
    :OPTION9
    ECHO Executing task manager
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B taskmgr.exe"
    :OPTIONa
    ECHO Executing control panel
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B control.exe"
    :OPTIONb
    ECHO Executing add/remove programs
    echo.
    runas /user:%auser%@DOMAINNAME "cmd /c Start /B rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl"
    GOTO:mymenu
    GOTO EXIT
    :EXIT

    You guys I appreciate the feedback but please read my entire post and help if related, this is getting a bit frustrating.
    a. I am not developing a powershell solution or "how do I launch them via command prompt" that is well known. The goal is to create an easy to use "run as helper" script for those that are not as savvy or do not have the commands memorized.
    Even so many of your suggestions do not work because the user logged in does not have admin rights and the commands are blocked because of this restriction.
    b. This is for the batch file in question, NOT "how do I launch command prompt as an admin"
    c. Again, several options work, several do not (network connections and programs and features do not) must likely due to same limitations as explorer.exe or UAC
    d. this is not "how do I launch the utilities by command line" it is "how do I launch them as the admin WHEN the current user does not have admin rights". The entire script works on a pc if you have admin rights because its launching
    it instead AS the current user, in that case the current user has admin rights therefore it doesnt reproduce the issue.
    e. running by control.exe using the app name or with cpl does not resolve the issue.
    f. I did not post that command prompt is having issues launching, I wrote a couple times that the options in my script do work such as command prompt. Even if you launch command prompt you cannot launch programs and features or network connections with your
    admin account with or without an additional runas command.

  • Alternate Shell with specified batch file

    Hi there,
    I've created a set of scripts for my computer lab which, per a scheduled task, reboots the computer into safeboot with the alternate shell enabled (via bcdedit). It also sets the machine to auto-login (via registry keys).
    Then it runs a couple of malware scans, and whatever other clean-up tasks I want.
    Now, I'm wanting to pass a script to be executed by the cmd.exe shell (i.e. the 'alternate' shell), but it seems no matter what syntax I use, it doesn't want to parse anything after the cmd.exe in the registry.
    e.g.
    batch file syntax, with executable in QMs and parameters un-quoted:
    HKLM\System\CurrentControlSet\Control\SafeBoot\AlternateShell : "cmd.exe" /C C:\labUtilities\***.bat
    Fully-quoted:
    HKLM\System\CurrentControlSet\Control\SafeBoot\AlternateShell : "cmd.exe /C C:\labUtilities\***.bat"
    Fully un-quoted:
    HKLM\System\CurrentControlSet\Control\SafeBoot\AlternateShell : cmd.exe /C C:\labUtilities\***.bat
    Does anyone have experience with passing parameters to via the AlternateShell key?
    I know for a fact this is possible, as I've seen it done by malware; I just can't remember the syntax it used.
    Thank you!

    i think it should be:
    CMD /c "C:\labUtilities\***.bat" under normal circumstances, not sure if this will work out of the registry.
    source: http://ss64.com/nt/cmd.html
    Kind regards, Philipp - Solid IT Solutions

  • Can I close Firefox and Plugin-container with a batch file? ANSWER: Yes. SOLUTION below.

    Steps to create batch file to End process tree: "Firefox.EXE"
    1. create new .txt file
    2. copy/paste the following: taskkill /IM firefox.exe
    3. Save
    4. Rename the txt file - EndFirefoxTree.bat
    5. Run from desktop at any time, give it a cute icon if you'd like!.

    This works well although user will need to put the .bat file in Documents and create a shortcut to desktop in order to change the icon (of the shortcut).

  • Install flash with a batch file

    good morning every one! i need some help.here's the hole
    thing.i made an unattended XP installation and i wtote this little
    batch file "start /wait flash9.exe /q" . i want to install the
    flash active-x after the finish of xp installation,when it starts
    for the first time the desktop. i tried many ways but no
    luck...does anyone knows how to do it? the process stops and i
    think that the desktop is not fully loaded when the batch
    runs....thanks for your attention!

    I don't know about formating around bad blocks, but I do know a thing or two about SS drives.  In my day job I design rugged computer systems that must withstand ridiculous vibration levels, as such we use SSDs.
    They are not trivial devices and do a substantial amount of internal house keeping.
    In general, they map logical blocks (the ones that are specified via the IDE interface) to physical locations in the drive.  They dynamically keep track of bad or worn out physical blocks and remove them from the logical to physical map. 
    Even more clever, they keep track of the write history to the physical blocks and perform automatic write leveling.  If a given portion of the drive is seeing excessive write cycles, while other areas never change, the controller will move the static data to the more worn area of the drive and the dynamic data to the areas that have less wear.  The map of logical to physical allocation is silently updated internally, and the external driver never knows it happened.
    Because of the write leveling, when a drive starts to fail due to wear out, you will find the whole whole drive quickly fails.
    Other considerations:  SSDs are VERY sensitive to loosing power during a write cycle.  The best way to corrupt a SSD is to power it down when it is performing a write or internal house keeping.
    When selecting a SSD, or any solid state storage (SD, USB Drive, CF, etc...) pick one that uses single level encoding.  This means it stores one bit of data per EE cell.  Multi level encoding uses analog techniques to put more than one bit per cell.  Good for storage density, BAD for data integrity and storage life.
    --Sorry
    Last edited by ewaller (2009-09-10 05:39:30)

  • Remote oracle 10g r2 Connection test with either batch file or perl

    Hi,
    I want to know if my remote oracle 10g server on Windows 2003 server is up and running through either batch file or perl script or vbscript. The system from which I want to run the script do not have oracle client. How can I do this?
    Thanks in advance
    vivek

    I also got the same proble for EM. Any solution found?
    [email protected]
    Thanks

  • Combine .pdf's with digital signatures

    Hi all
    I can't seem to get this right.  I have a set of Drawings (blue prints) that are signed as individual pages/.pdfs.  I need to combine them into one file (not a portfolio), how can I make this happen?
    Also - I do NOT need to keep the integrity of the signatures from the individual sheets.  I just need to combine them with or without the seal/signature.

    Adding the pages individually seems to work, adding them by highlighting and dragging over pushes the pages out of order.  I am dealing with hundreds to thousands of pages.  I’ll check to see how to Flatten.
    Thanks!
    Justin L. Head
    Document Controls Analyst
    The HNTB Corporation
    2900 South Quincy St
    Suite 200
    Arlington, VA 22206
    Tel (703) 253-5891
    Fax (703) 671-6210
    www.hntb.com<http://www.hntb.com/

  • InDesign issue outputting pdf's with EPS in file.

    So just recently one of my files that has an .eps placed in it was getting errors exporting to pdf, it used to work fine in one of the files I had it. I even re-created the .eps and replaced it to see if it would work. This file had the same problem on another MBP as well. It exports fine when i resave the exact .eps as an .ai, so Im curious if anyone else had problems with any exports like this.
    The really strange thing is that another file very similiar with a different placed .eps in it (the .eps are both UPC's) will work fine. It seems like it is a corrupt file, but I have literally rebuilt the entire file and it does it every time.
    I am using CS2, with all the latest updates.

    Ok, thats falls in line with what I have done.
    So then, how do I export to .idml? ... Im not seeing that as an export option (CS5).  <-- Found it, its under export, just didn't see it. Ill be back and post results.
    -------------------------- STATUS, WORKS.
    SO: Export the .indd file as an InDesign Markup file. Close the original .indd w/o saving. Open the newly created InDesign Markup file and re-save it as the .indd that you want to export. After re-saving, re-export the newly saved .indd. IT WILL NAME IT CORRECTLY... Thanks, that was driving me nuts.
    Hey, and thanks for the SUPER QUICK response.
    ptermclean

Maybe you are looking for