Combine 720 and 1080 video of the same performance?

In early November I have been asked to video a performance. I have 720 and a 1080 cameras. What can I expect when I edit. I will be using jus one camera for audio source. I am using OS 10.8.5. Plan to use iMovie, but Final Cut Express is available.

I would just buy a new kit: http://www.crucial.com/store/listparts.aspx?model=Pavilion%20g6-2040nr&Cat=RAM
It's less than $40.

Similar Messages

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

Are the 30Gh and 60Gh Video iPod the same dimension?

I'm wondering if the 30gig and the 60gig video iPods are the same dimensions? I'm looking to buy that Video iPod protective case, and the item's description says: "Fits a 30G iPod" Is there a size difference between the two of them??
Thank you,
Andre

"But here’s the kicker: At under half an inch thin, the new 30GB iPod takes up about 45 percent less room than the original iPod. Even the new 60GB model is over 10 percent thinner than the fourth-generation 30GB iPod. More features in less space? Sounds like iPod."
Its a bit thicker than the 30gb.

Dual screen-annotate and watch videos at the same time?

Does anyone know a way to annotate pdfs while watching a video lecture at the same time? I have tried notability and side by side but both lack the capabilities to do both. Thanks

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

Acquiring data from daq-pad and saving video at the same time

I am trying to record data from my daq-pad at 100 samples per second. At the same time I am using a usb interfaced camera to record a video feed. The idea is that when i begin recording data i also begin recording the video feed.
The way I record the video feed works fine in its own VI (I need it to record at 30fps and it does this just fine). But when I integrate it with the data record/capture VI the framing rate slows down to only 10 fps. I suspect this is because the VI gets caught capturing the data from the daq-pad thus slowing down its ability to record the video feed. I was hoping you could give me some help with how to record the data at 100 samples per second and get the VI to capture 30 frames per second. Thanks in advance for anyone who helps out.
I've attached the VI that has both the data capture and the video capture already integrated.
Attachments:
usa_swimming with video21.vi ‏892 KB

Hi,
I took a look at your code and the problem is that you have both the data acquistion and the image acquistion in the same loop. Have you tried using parellel loops? There is more information about this in the labview tutorials that are available online if you are unsure how to do that. The problem is that you are doing a lot of things in that loop (acquiring data, doing some analysis, and writing to file), so you can't acquire images very fast because it depends on the speed of the loop iteration. I hope this helps.
Have a great day,
GG

Playing and saving videos at the same time

Hi~
I wanna download a movie clip from the Web and play it, and at the same time, save the clip onto the local disk. So next time I play the clip, no more downloading.
my environment is Flash CS4 and AIR.
I looked up three classes: NetConnection, NetStream, VideoPlayer.
give me some hints~
thanks.

I found this tutorial and was going to try it out. http://tdotblog.info/?q=node/1 It looks pretty simple and and works with AIR.

Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

can i play audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you

Hi SwedelostinAmerica,
Welcome to the Apple Support Communities!
The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
The following article explains Bluetooth pairing and usage. Please use it as a reference.
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Have a great day,
Joe

HDMI and Component Video at the same time?

I'm trying to connect both outputs of the Apple TV at once. HDMI to the projector and the component to my receiver. I want to be able to get a preview of what I'm going to be watching before sending it to the projector.
Is there a way to have both outputs active? I just need one component or composite output for my preview.

Wiqui wrote:
Is there a way to have both outputs active? I just need one component or composite output for my preview.
no.
HDMI takes precedence and will disable component when an HDMI cable is connected

Synchronous and asynchronous IO on the same file descriptor

Hi does any body knows about problems in combining synchronous and asynchronous IO on the same file descriptor? It appears that I may miss SIGIOs in that case.

I don't think there is any real easy way to do an insert. If writing to a file, I would use a FileWriter, a FileOutputStream, or a RandomAccessFile class. I don't know of any class that will automatically do an insert so you might have to write your own method that does this. This is pretty easy: use RandomAccessFile might be the best for most situations for doing this (ie, if you are inserting many times at different locations in the file). Just copy all the bytes from the point in the file you want to insert to the end of the file, and then write your bit, and then rewrite all the read bytes to the file again. Depending on how many times you are writing to the file and how big the file is, you may want to keep the file in memory at all times because writing to disk is extremely slowwww. If the file is huge, and you are inserting seldomly, then do what I said above. If the point of insertion is closer to the start of the file, then it might be a good idea to do the above but instead of copying the bytes from the point of insertion to the end of the file, copy the bytes from the start of the file to the point of insertion.

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

How can I share my screen and video at the same ti...

As the title says, I want to share my Mac screen and my face cam (video) at the same time. I looked this up before and I found out that you need a premium account in order to do this...but then I found out that the premium account is no longer available. So, is it still possible?

bump again...please respond! thank you

Is there a way to view video via the display AND TV out at the same time?

Is there a way to display the video output for supported apps on the display as well as through the TV out at the same time? To explain my setup briefly, I'd like to have the front seat passenger in my vehicle be able to hold the iPad and watch video while the A/V cable runs through the car system and displays on the ceiling mounted TV for the back passengers.
As of right now, it seems as though it will only allow for one display at a time, and in this case, only showing video through the TV out. I don't know if the iPad has the processing power to mirror outputs to the display and the TV out at the same time, though I imagine that it should.
So, does anyone have any ideas on how to make this possible, if it's possible at all?
Thanks in advance.

If you'd emailed Steve Jobs with this question, here is what his response would have been had he blessed you with a reply:
No.

How can I combine the nav bar and menu bar on the same line to save space?

Firefox v29 seems to be a huge step backward in customization. I need to save space for content so previously I turned off tabs and combined the menu bar and nav bar on the same line. The url space is way too long anyway. Now with v29 all my customization is gone and I cannot get it back. I can no longer move items on the nav bar to combine it with the menu bar. Why was this done? It only limits my ability to customize my browser? I am very frustrated that you took a great browser and ruined it.

I get it that Firefox has changed, but the change is for the worse. It makes it impossible to customize menus as I had before v.29.

Loading and Playing 2 videos at the same time

Hello everyone
I'm having a problem on loading and playing two videos at the same time on XletView.
The background video, I'm loading by editing channels.xml that is located at config folder into xletview folder. I've just to add the file path and when i start the video it starts playing.
But now, I have a problem. I have to load a file that is into my HD, and play it at the same time of the main(background) video.
Do anyone know how to do this?

anyone?
PowerBook G4 1.67 GHz Mac OS X (10.4.7) 1.5 GB ram

Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player. Did that, and am still getting the same prompt and can't watch any videos at all. What is going on here, Apple??

Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player. Did that, and am still getting the same prompt and can't watch any videos at all. What is going on here, Apple??

I do not know how to do this with an Apple TV (I don't have one), but as far as I know Apple TV only does mirroring.
If you have an HDMI cable long enough to reach your TV from where you sit, then it's easy. The TV could be set up in Extended Desktop mode (mirroring off) as if it was simply another computer monitor, and then you could just drag windows to it. If you have the Displays icon in your menu bar, that's where the setting is, or if the icon is not there, then the setting is in the Displays system preference. But again, that's for conventionally connected monitors, not Apple TV. If you don't have an HDMI cable and wanted a long one that's affordable you can get those at monoprice.com.
The answer we are still waiting for is if anyone knows if Apple TV can be used in extended desktop (non-mirroring) mode.

Combine 720 and 1080 video of the same performance?

Similar Messages

Maybe you are looking for