Combine Lightroom catalogs with the same name.

Newbie, be easy on me. This will probably end up being a dumb question, but here goes anyway. I have 2 lightroom catalogs named (Lightroom 2 Catalog.lrcat) What is the easiest way to combine those 2 into 1 catalog (Lightroom 2 Catalog.lrcat). Thank you in advance!
Scott

Hi Scott
I'd open one of the libraries, and rename it "catalogue2" and then open the other one and import the "catalogue2" into the 1st one
alternatively, find where one of the catalogues is and rename is thru explorer or finder, and open that one and then import the other catalogue.
All the import is in File Import
import from catalogue,
from chip from disk etc
Hope that helps
Cheers
Hamish
hamishNIVEN Photography

Similar Messages

Lightroom Faces: Two People with the Same Name

I downloaded Lightroom CC last night and came up with the following question:
I have an uncle and a cousin with the same name...can Lightroom create two different "people" or will I need to name them each differently? I'm guessing it's the latter but figured I'd pose the question in case there is an alternate solution.

johnrellis schreef:
You might have a keyword for each family grouping, e.g. "John Ellis Family" and "Steve Ellis Family", and then place the keywords for the members of each under those parents. E.g. under "John Ellis Family" you'd have "John Ellis", "Mary Ellis", "Jane Ellis", etc. And under "Steve Ellis Family", you might have "Steve Ellis", "Kathryn Ellis", and "John Ellis" (a different John Ellis).
It's a good idea to work with hierarchies. But for the face option to work, you will have to have two unique names.
I just did a quick test.
I have some images of twins in my catalogue, Tom and Boris.
Under them, I created a "name" Twin. Because of the hierarchy, I can apply Boris>Twin to one image, Tom>Twin to another and both of them to a third photo.
So I drag a name box around them and type "Twin". The drop down (auto fill) lets me choose between two identical looking entries called "twin". No way of knowing which one to pick. And maybe you've noticed that the auto fill drop down list starts with entries you used recently. So no good remembering that the top "Twin" will always be "Boris" for example.
The count of used keywords only goes up for one of them if I happen to use the same entry twice.
The only way for this to work (as far as I can tell now) is to drag the appropriate "Twin" from the keywordlist onto the right face in the People view (O).
I work with hierarchies, but I make sure I have unique names.
Also, I don't use spaces in the names, but rather JohnEllis, SteveEllis, etc. That way, if I have a very long list with Ellis members and also a lot of people called John or Steve, it's much easier to narrow the search for a particular person (like in smart collections).
Opening the properties for the keyword, I make sure that "include on export" is NOT on, so you won't see that strange looking name Number123JohnEllis in your exported image.
I have "export containing keywords" and "export synonyms" (and now with LR CC of course "Person") checked. As a synonym, you can put "John, Ellis, John Ellis, Steve Ellis family" and all of these will export.
Hope this makes sense.
Like John suggests, if you already create the Ellis Family>Steve Ellis Family>John Ellis>John>Numer123JohnEllis then you don't have to enter the synonyms, as long as you have "export containing keywords" on all of them checked, as well as "include on export" (except for the Number123JohnEllis keyword which shouldn't have "include on export" checked).
Working with hierarchies can really help you in your keywording. But it will take some time to set it up.

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

Dng and tif file with the same name, in the same Lightroom folder

If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you.

Updating vs. Deleting Folder files with the same name

Hello all,
Bear with me as I try to explain this.
First off, I'm a long time Windows user who just happily converted to Mac. I'm loving my mac so far, but I've run into a snag that I hope to get clarification on.
Let me set up a scenario on how this works with Windows.
Let's say I have two folders/root directories labeled as today's date "20100729" with image files in them. Each folder has different picture file names. In other words, the files in each of folders are different. The only thing that is the same is the Folder/Directory name, which in this case is "20100729".
So, in a windows environment let's say that each of these folders (with the same name) are located on 2 hard drives (A & B). If I take the folder from drive "A" and drop it in drive "B", windows seamlessly combines the files from both folders into one.
On the flip side, when doing the same thing on my Mac, the entire folder contents from drive B gets replaced from drive A, even though the file names are all different. Which is very annoying.
If you understand what I'm saying and know of a way for this to work the "Windows" way please let me know.
Thanks in advance for your help. Let me know if you need further clarification.
Cheers,
- Jeff

Use the ditto command in the Terminal, which is in the /Applications/Utilities/ folder; for instructions on its use, enter 'man ditto' without the quote marks into the Terminal prompt.
(53065)

Unable create a target file with the same name

Hi,
I have to pick an attachment from a web service and place the attachment in
a folder, with the same name (Attached File Name). I tried this using SOAP to file
scenario. Using SOAP, I'm able to get the attachment inside PI with the same
name, but not able to generate the file in the receiver end.
Please let me know if this is possible or else is there any other way to do
it.
Regards,
Deepak Ravi

Check also:
Combining three different aspects of PI (ASMA, AF Module and variable substitution) in one shot
Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
Regards

PL/SQL Procedures with the same name

Hi,
I have some PL/SQL procedures with the same name but different arguments.
If I try to catalog the second or third ALBPM always catalogs the first and I don't want to use this. ALBPM only catalogs the first one.
ALBPM Studio Logs:
Introspecci?n en curso...
Agregando procedimiento 'ADM_SGI.UGDIASINOI'
Agregando procedimiento 'ADM_SGI.UGDIASINOI'
Agregando procedimiento 'ADM_SGI.UGDIASINOI'
[Advertencia] No se puede agregar procedimiento 'UGDIASINOI'. Motivo: Duplicar nombre del componente (M?dulo DatabaseRoot.ADM_SGI - Componente UGDIASINOI)..
[Advertencia] No se puede agregar procedimiento 'UGDIASINOI'. Motivo: Duplicar nombre del componente (M?dulo DatabaseRoot.ADM_SGI - Componente UGDIASINOI)..
Analizando componentes
Any solution or idea??
Thanks!

I need to retrive data from PL/SQL stored procedures. I am using the DynamicSQL component (2nd workaround) to retrive data from PL/SQL stored procedures. 
I am having some problems. 
This is the code I am running in Fuego Studio 5.5 SP 11 Build #71108: 
dynamicSQL as Fuego.Sql.DynamicSQL 
iterator as Iterator(Any[Any]) 
sentence as String 
implname as String 
dynamicSQL = Fuego.Sql.DynamicSQL() 
implname = "conexionORBPAU" 
sentence = "var result REFCURSOR; " + 
"exec :result_cursor := pkg_audbpm_bpaasig_indicador.prgetsingle(9999);"; 
iterator = executeQuery(DynamicSQL, sentence, implname, inParameters : []); 
And, this is the error: 
java.sql.SQLException: Falta el parametro IN o OUT en el indice:: 1 
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146) 
oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1681) 
 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3280) 
 at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3329) 
 at fuego.jdbc.FaultTolerantPreparedStatement.executeQuery(FaultTolerantPreparedStatement.java:579) 
 at fuegoblock.sql.DynamicSQL.executeQuery(DynamicSQL.java:340) 
... 
This is the code of the PL/SQL in the Oracle DB: 
CREATE OR REPLACE PACKAGE PKG_AUDBPM_BPAASIG_INDICADOR IS 
TYPE cursor_type IS REF CURSOR; 
 FUNCTION prGetSingle 
 ( 
 p_ID_ASIG_INDICADOR IN NUMBER 
 ) 
 RETURN cursor_type; 
END PKG_AUDBPM_BPAASIG_INDICADOR; 
is my code OK? Any ideas? 
Thanks in advance.

Use two VIs with the same name, different functionality on a single Project

Hi, I'm working with vision builder al labview, I need to integrate the vision builder migration Vis into my main program, (Is not an option), but I have multiple Vis autogenerated with the same name, how can i integrate them in the same project without dependency problems
Thanks in advance

Hi,
Unless you really need tight integration between the Vision code and the rest of your LabVIEW application, or would rather not have to pay for a Vision Builder AI runtime license on the targets on which you want to deploy your final application, I would recommend you look into using the Vision Builder AI LabVIEW API instead of migrating the inspection to LabVIEW.
The API allows to control Vision Builder AI by launching a Vision Builder AI engine, running the inspection and retrieving resulting images and results.
The advantage of the API is that it allows for easier modification and debugging of the Vision Inspection that you designed in Vision Builder, if you need to make changes later. (i.e. all you need to do is open the inspection in Vision Builder AI, modify parameters, add steps etc).
You won't have to change your LabVIEW application, unless you want to output additional results.
When you build and deploy your application, you will need to install Vision Builder AI on the target machine and get a runtime license for it.
Migrating the inspection to LabVIEW is a one way deal. If you need to make changes to the inspection, you will have to migrate the inspection again, or modify the code outside of the Vision Builder AI environment.
As you might have noticed, the code generated is quite complex, and it is recommended to go this route only if you need really tight integration/synchronization between the vision code and the rest or your LabVIEW code, or if you would rather pay for a cheaper Vision runtime license rather than a VBAI runtime license for the deployment machine (in case of deploying multiple systems where cost is a big consideration).
Vision Builder AI API examples are located in this folder:
C:\Program Files (x86)\National Instruments\Vision Builder AI\API Examples\LabVIEW Examples
Hope this helps clarify the use cases and help you make the right decision for your design.
Best regards,
Christophe

HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

I tried to make another account on my school Macbook Pro, made the Admin, account with the same name as the one I was using, deleted it and then all my desktop data is gone.

So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

Custom fields with the same name in Project Online

Today I discovered something interesting when creating custom fields in Project Online.
I usually create a certain set of custom fields that are useful to have on both the project and the task level. An example of these is Reportable, which I use to determine which tasks to roll up into reports and also which projects overall to report on.
So I created a project level custom field called Reportable. No problem.
I then created a custom field on the task level called Reportable. And the computer said no!
I then learned that although you could do this in Project Server 2013, you can't in Project Online. You can't have duplicate custom field names, even if they are of different types.
This has led me to use a naming standard, such as Reportable Task and Reportable Project. But I really don't like that as codes are for computers, not us humans. So I hope this changes in the future, but for now you just need to think about how you approach
the fields.
Good luck!
Ryan Darby
National Manager PMO
www.ipmo.com.au
www.projectonline.com.au

Hi Ryan,
I would follow Ben on this..
Just made a test on a Project 2013 instance on-premise and I cannot create a task ECF and a project ECF with the same name. The same test on a Online instance returns the same result: the ECF names must be unique whatever the entity is.
Waiting for Ben's confirmation.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync each phone separately

I have two iphone 4's with the same name on one computer. Can I change the name of one so that I can sync contacts separately?

How to rename your device in iTunes

How can i distinguish two controls with the same name?

I'm recording automated tests with VS 2012 Coded Ui Test for testing a web application.
In that web application it is possible to enter data in something looking like a list.
There is - per example - an Edit control sitting on a ColumnHeader with the name/text "Description".
Below that header is another Edit control for data input - containing the text "Description" too and which lies on a Cell control.
When i playback my recording, Coded UI Test looks for a control with the name "Description" and gets the one, it finds at first.
In that case the Edit on the ColumnHeader, which causes an exception, when the Text will be setted with the data input from the recording.
Unfortunately the controls have no ID.
Is there a way to distinguish controls with the same name?
Thanks in advance!

Hi Patrick Pirzer,
>>Is there a way to distinguish controls with the same name?
Based on the blog "How does “Coded UI test” finds a control ??", we know that to really find a control, it would be related to the unique properties as the search properties,
so if two controls have the same property, please use other unique property as the search property would be better.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Combine Lightroom catalogs with the same name.

Similar Messages

Maybe you are looking for