Combine ppt files into pdf - picture issue

Hello All,
we are trying to combine several ppt files into one pdf document . Joining process went correctly, but some pictures in the final pdf are broken. If we try to save separate file to pdf, there is no issue. This issue is visible only during marging several ppts files into pdf. Please, do somebody know, where shoold be a problem ? (Office 2013, Adobe Acrobat XI)
Thanks in advance for any help.
Peter

Hi Peter Drgon,
One possible solution would be to replace the broken images of the combined pdf with original ones.
You can select the particular broken images from your ppt file and convert them to pdf,
then import that image containing pdf into your combined pdf file and later you can use 'edit text and images' tools to replace the broken Image in your combined pdf file.
Does that help? If you face any challenges or if i have misinterpreted your issue. Please let me know.
Regards,
Rahul

Similar Messages

  • How do I convert a PPT file into PDF file?

    How do I convert a PPT into an PDF using adobe online?  Converting word to PDF works but not PPT to PDF. Thanks

    Hi,
    PPT files should work as DOC(X) files do on https://createpdf.acrobat.com/app.html.
    Please try another PPT file(something small and simple) or share your PPT file with me so that I can review the file using below site:
    https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg
    Thank you.
    Hisam

  • Conversion of Word/PPT File into PDF

    Hello,
    is there a way to convert an word/ppt file (stored in KPRO/content managment) into PDF within ABAP?
    We want to read attachmens from backend and convert it into PDF in order to be shown on mobile app (IPAD)
    Regards
    Michael

    Hi
    You can get the file from Contenent and stored the file in application, here call a script to convert the file from ppt to pdf
    Max

  • Hiding filenames when combining multiple files into a single .pdf

    I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
    -Ss

    Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
    If you want, I can send the file to you.

  • Possibility to execute Acrobat Pro's "Combine files into PDF" function from within SAP?

    Good day.
    Presently, a company uses Acrobat Pro to manually combine files such as *.pdf, *.jpg, *.doc, which have been downloaded from SAP's Document Management System, into one pdf file. I would like to know if it is possible to automatically execute Acrobat Pro's "Combine files into PDF" function from within SAP (ECC 6.0) application system. I'm wondering if this could be achieved from a program via OLE (Object Linking and Embedding) or RFC (remote function call).
    Thanks in advance for your thoughts and inputs.

    Yes, you can combine PDF files via IAC/COM methods.

  • How do I save the Combine Files Into PDF steps?

    I have a set of steps that I would like to repeat in the Combine Files into PDF screen, but I can not figure out how to save that definition file. I am using Adobe Acrobat Pro 10.
    Thanks,

    Hi MarGal,
    Can you please elaborate what you actually want to perform.
    Also let us know what you mean by filing system.

  • I can not  combine different files into one pdf because pdf maker file is missing

    i am prompted to install or repair the pdf maker file when i want to combine word, jpeg and other file into pdf, and it takes over 30 min. and the problem still remain unsolved. could anybody help? Do i need to  reinstall the pdf CD ?

    acrobat version 8 professional, word 2003, i had no problem before as far as i can remember. Appreciate your help.

  • How can you convert a PDF File into a picture format for uploading?

    How can you convert a PDF File into a picture format for uploading?

    If you have Acrobat 11, you'd select: File > Save As Other > Image
    and select one of the available image formats.

  • Converting a ppt file into a rich pdf

    I am trying to find a way to convert my ppt file into a rich pdf so that the hyperlinks from the ppt appear on the pdf.
    Thanks

    Good morning Hug
    In my version of Powerpoint for Mac 2011 there is a dropdown panel that allows you to save it as a PDF format.
    Is this what you were looking for?

  • How to combine .wmv files into one file???

    Hello Apple World,
    Can someone tell me a software that will allow me to combine ".wmv" files into one? I have several files that I need to combine then add music to. VERY simple with several software packages frow Windows pc's, but I'm struggling with this since getting my first mac! PLEASE help.

    Hi:
    How can I edit MPEG or convert DVD or MPEG to DV
    http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    Matti says it better than any of us:
    how/where you can join clips with Streamclip
    Also MPEG Streamclip guide explains it.
    MPEG Streamclip can join similar MPEG files: The joined files must have the same PIDs, the same start codes, and the same audio/video properties (that is, they must come from the same source or channel).
    Using "Convert to MPEG" before joining the files can be helpful, because it changes PIDs and start codes to a default value. The preferred method to join streams is to Copy one stream in MPEG Streamclip, open another stream and Paste it there. This method checks that the joined streams indeed are compatible. Another method is to put the MPEGs in the same folder, and rename them so that they sort as desired in list view. Then select them via MPEG Streamclip's "File/Open Files..." dialog box (Shift- or Command-click to select multiple MPEGs). Then choose "Edit/Fix Timecode Breaks". After this MPEG Streamclip should report the combined length of all MPEGs (check the Log Window if you want to know whether any timecode breaks were found). Then choose "File/Convert to MPEG... or /Save As..." to save them in a single file. If the video transition between two files looks bad, you can use the Cut command to improve it. You can join very different and incompatible MPEGs with this latter method so the end result is not guaranteed to work.
    MPEG Streamclip can also edit MPEG files. Just set In/Out points (with I/O keys), Cut unwanted material off and choose "File/Convert to MPEG...". You can also Cut/Copy selections to other parts of the same stream or open another compatible stream and Paste it there. Shift-dragging the playhead can also be used to define a selection. Option + arrow keys jump to the beginning/end or In/Out points. You can use the Trim-command to more closely see a part of the video before cutting, then choose Revert Trimming to see all material. JKL-keys can be used to enable fast forward or reverse playing. The scroll wheel works also; with the Option key it scrolls 1 second per click. See the manual for more details on how to jump in single frame, GOP, 1 second, 10 second or 1 minute chunks when searching a specific spot in the video.
    Editing and trimming can be accurate only if In and Out are both on keyframes because MPEG Streamclip edits to the GOP, not to the frame. For DVD and (XS)VCD the maximum GOP size is PAL 15 and NTSC 18 frames, so the editing accuracy can be up to about 0.6 seconds. You can advance to the previous or next keyframe (i.e. I-frame, the beginning of each GOP or Group Of Pictures) with the Up/Down arrow keys -- you can also use the Edit/Go to Keyframe command to see where the In and Out points really are when editing (the In point is included in the selection, the Out point is not included). Shift + Up/Down arrow keys allow fine-tuning the selection to the GOP.
    Sue

  • Converting PST files into PDF's & the recipient can't print

    I am having the following issue with Adobe: I am converting PST files into PDF's and the recipient can view the information, but they cannot print. Actually, some information such as whether there is an attachment is displayed in the printout, but none of the actual text appears. I do not see any security settings at this end that would be causing this, but I have been assured that there is nothing on the recipients either. The same thing was happening when I sent it to a colleague here in the office.

    I discovered the problem and solution. Often PST's contain damaged text. It is not easy to deal with the damaged text. It is more efficient to have the recipient print the file as an image.Select the print tab, go to advanced, select print as image. I got the information by looking through the more specific information on the Adobe site.

  • Converting Multiple .EPS files into .PDF

    Dear Forum:  We have tried converting multiple .eps files into PDF using article 325977. This article in Adobe help is really designed to convert .ai files into either .eps or.pdf, our situation is to convert multiple .eps files into PDF. Everytime we run the macro, it simply takes the eps file and saves it as another eps file and does not convert. We have a "Save As" step that we have in the macro that is set to "Save As" PDF, but it still does not work. What are we doing wrong?

    Hi mephisto11757,
    You can convert the following file types to PDF with the Adobe CreatePDF service:
    Adobe Creative Suite® file formats Examples include: .psd, .ai, .indd
    Microsoft Word (2000, XP, 2003, 2007, 2010, & 2011) .doc, .docx
    Microsoft Excel (2000, XP, 2003, 2007, 2010, & 2011) .xls, .xlsx
    Microsoft PowerPoint (2000, XP, 2003, 2007, 2010, & 2011) .ppt, .pptx
    Microsoft Publisher (2000, XP, 2003, 2007, 2010, & 2011) .pub
    Text Files .txt
    Rich Text Format .rtf
    Adobe PostScript .ps
    OpenOffice Format .odt
    Star Office .sxw, .sxi, .sxc, .sxd, .stw
    Corel WordPerfect .wpd
    Image file formats .gif, .png, .jpg, .bmp, .tiff
    Regards,
    Florence

  • How can I change a Microsoft Word document file into a picture file?

    How can I change a Microsoft Word document file into a picture or jpeg file? I am wanting to make the image I created my background on my macbook pro.

    After I had the document image the way I wanted it, I saved it as a web page and went from there. Below are the steps starting after I did the "save as" option in Word:
    1) Select "Save As Web Page". I changed the location from documents to pictures when the window came up to save it as a web page.
    2) Go to "Finder" on you main screen, or if it's on your main toolbar at the bottom.
    3) Click on the "Pictures" tab and find the file you just re-saved as a web page. (I included "web page" or something similar in the new title so I could easily find the correct file I was looking for)
    4) Open the correct file and then "right click" on the actual image. (Use 2 fingers to do so on a Mac)
    5) Select 'Use Image As Desktop Picture", and voilà! The personally created image, or whatever it is that you wanted, is now your background.
    **One problem I encountered while doing this is that the image would show up like it was right-aligned in relation to the whole screen. The only way I could figure how to fix this was to go back to the very original document in Word, (the one before it was saved as a web page), and move everything over to the left.
    I hope this helps someone else who was as frustrated as I was with something that I thought would have been very simple to do! If you have any tips or suggestions of your own, please feel free to share. : )

  • Acrobat XI Pro successfully installed, but it failed in converting word files into PDF, why?

    I just installed Adobe XI Pro through the download assistant, it looks the installation went well, but when I tried to convert word files into PDF (tried many times), it failed. Anyone has the same problems, any solutions?

    Please reply with more information - what your operating system is, do you have Office installed, and what exactly is happening. Is there an error message, does the application crash, and from where are you starting the conversion (using Word and PDFMaker, using Acrobat's Create button, or batch processing).

  • Load data in xml file into Pdf form created by LiveCycle Designer

    I want to load data in xml file into Pdf form when Pdf opened and Form field will be filled with data from xml file .I try to use $host.importdata("filename.xml"); But i could not find suitable place to run my code. Can anyone give me some advice? thank you.

    Hi,
    extract your xml and then you can use insert all clause.
    here's very small example on 10.2.0.1.0
    SQL> create table table1(id number,val varchar2(10));
    Table created.
    SQL> create table table2(id number,val varchar2(10));
    Table created.
    SQL> insert all
      2  into table1 values(id,val)
      3  into table2 values(id2,val2)
      4  select extractValue(x.col,'/a/id1') id
      5        ,extractValue(x.col,'/a/value') val
      6        ,extractValue(x.col,'/a/value2') val2
      7        ,extractValue(x.col,'/a/id2') id2
      8  from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
    2 rows created.
    SQL> select * from table1;
            ID VAL                                                                 
             1 a                                                                   
    SQL> select * from table2;
            ID VAL                                                                 
             2 b                                                                    Ants

Maybe you are looking for