Combine quality of two images?

Hi
I know how to combine or merge tow images in Photoshop CS5
But if I use images from the Internet, mostly by seaching in Google picture search.
The images has different quality, such as colors and lightning.
Is there a way in Photoshop to combine the colors in two images, so
they have the same color tones. So as speak, look like the same quality.
How do I meassure and compare the colors and light in-side Photoshop.
brgds
Lars jØrgensen

You're talking about finding images of the very same subject material, shot from the exact same place, and combining them to make an image better than any one of the images you found? I'm not sure I'm following you completely here.
As far as making the colors in two images match in general, have a look at the Image - Adjustments - Match Color function.
You can sample colors by making the INFO panel visible (Window - Info) and hovering the cursor over your images.
-Noel

Similar Messages

How to combine two images in preview onto one page

Sorry if this topic doesn't go here - there wasn't a "preview" category.
I have two images that i want to print out on the same page and right now they are each on a separate page in the same file in preview. Does anyone know how I can combine them onto one page?
Thanks
Message was edited by: p-rock

Hi -
I load two images in Preview and select them.
!http://www.spotsbeforeyoureyes.com/Preview1.jpg!
Then I select Print Selected Images:
!http://www.spotsbeforeyoureyes.com/Preview2.jpg!
When the print dialog box opens, I select Images per Page:2
!http://www.spotsbeforeyoureyes.com/Preview3.jpg!
Hope this helps.
MtD

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

One does not "see" the images when selecting; You just select two file names, click OK, PhotoShop does the rest, and comes back with same message.

Combining two images with similar spot channels together

I have two images that I need to combine into one. They each have 2 spot channels. What is the best way to achieve this? I am using CS3. Thank you

Are you trying to get them to RGB/CMYK, or to a new duotone/multichannel colorspace? Try here if the former: http://www.adobeforums.com/webx/.59b74d21/2

Loupe view caching- not even two images?

Is there a way to adjust how many previews are kept in RAM for the loupe?
I've found that most of the time I can't even bounce between two images without waiting for several seconds for the image in the loupe to appear. This is on a first-generation macbook pro with 2GB of ram, no other open applications, and 20GB of disk space free (and just defragmented.) The preview quality slider is set to the middle position. I shoot exclusively in RAW and upgraded recently from a 10D to a 40D; I'm guessing that Aperture only allocates a fixed amount of memory to storing previously viewed images, and the larger 40D images are too big for the default settings.
Sometimes I can go through three images without seeing the "loading" prompt; other times, I hit the arrow keys back and forth between two images, not even moving the mouse to compare two shots, and see "Loading..." for long enough that I can't make a visual comparison between the two images for finer detail. In one word: useless.
Is this a restriction of VRAM? System memory? Graphics processor in the original MBP? Pure "policy" in software, ie, "we will use 40MB of memory to cache previews"? Anything that can be changed via 'defaults'?

Janet,
The loupe is "smooth" panning around the image (except after more than 1-2 adjustments are applied, then it rapidly deteriorates.) The issue is switching between two photos rapidly to compare details such as "who's looking which way" and "what is in focus." I can sit for 20 seconds or more flipping between two images next to each other in the strip, and each time "Loading..." will appear and the loupe will be blank.
I just tested it on a Core2 MBP (2.3ghz, 2GB), and received different behavior. The "loading" delay happens once or maybe twice, then I can repeatedly swap between two images with no "Loading", but two is the limit- seeking to a third causes the first image to drop out of the 'cache'. The newer system has only about ten photos in it; the older system has almost 20GB of 10D images and another ~2-3GB of 40D images. I'm not entirely sure how valid the comparison is, then.
Both systems have 256MB of VRAM, and both are the Radeon X1600 (which is curious- I expected the Core2 machine to have a newer card. I guess it's one of the very early Core2 machines. I wonder if they simply bumped up the clock speed- the original MBP's X1600 was intentionally downgraded by Apple in clockspeed.)
I'm not using sRGB space- I shoot everything raw and have always set my cameras for Adobe RGB. I'm not a new user of Aperture, so I'm aware of thumbnail/preview building etc. I've tinkered with it on other people's machines since v1. I've never witnessed an Aperture crash, but I've only played maybe once or twice a month.
I've also noticed the quality of display in the main viewer window to be exceptionally poor with images from the 40D; it seems very fuzzy, and almost like it's up-sampled from a low resolution version. Sharp edges are very oddly (and poorly) aliased; almost like Aperture is using the preview image from the camera, instead of building its own.
Another thing: sharpness on exported JPEGs, both full size and scaled down,seems downright lousy. Odd...a couple of versions ago, they were too sharp, it seemed.

How to compare two images and display the difference on Front Panel

HI..
I have attached two images.
I want to compare these two images and subtract the differenc from these two images and display the difference(the mouse) on the front panel
Anyone can help me?
Really thanks
Attachments:
IMG_2117.JPG ‏1677 KB
IMG_2118.JPG ‏1650 KB

The missing thing. You have to keep in mind that what you see is not the same as the camera sees.
So when using IMAQ Substract it gives you the difference of the value of every single pixel!
In order to find the mouse as only difference you have to manage that every other pixel value stays the same, e.g. with a proper lightening.
At the other hand you can combine different filters or alogorithms to get the object, e.g. if the object is darker or brighter then everything else in the image you could use a threshold and then use morphologic operations to get the objects size and position.
Christian

[b]Two images in a Label [/b]     (foreground & background)

I cannot add two images to a Label. just one is acceptable but I have to add two images in a Label or another idea that shows two images up and down (foreground & background). The foreground image is GIF so it is transparent and the background is JPEG ..
Is there any idea or sample code for this? I couldnt managed for about 3 hours.
Regards, Bulent TASTAN

The easiest thing to do is combine the images into one image.
import java.awt.*;
import java.awt.geom.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import javax.imageio.*;
import javax.swing.*;
public class Example {
    public static void main(String[] args) throws IOException {
        BufferedImage gosling = ImageIO.read(new URL("http://today.java.net/jag/bio/JagHeadshot-small.jpg"));
        BufferedImage duke = ImageIO.read(new URL("http://today.java.net/jag/old/green/duke/T4.gif"));
        Graphics2D g = gosling.createGraphics();
        double dx = (gosling.getWidth()-duke.getWidth())/2.0;
        double dy = gosling.getHeight()-duke.getHeight();
        AffineTransform xform = AffineTransform.getTranslateInstance(dx, dy);
        g.drawRenderedImage(duke, xform);
        g.dispose();
        JFrame f = new JFrame("Example");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JLabel(new ImageIcon(gosling)));
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}

I want to make a movie from two images

I have two images (.jpg) that I wnat to put together so they flop back and forth (one then the other) creating a movie lasting about 10 seconds.
How might I go about this using iMovie. I've tried about everthing I can think of. But I'm very new using iMove.
Thanks in advance for any help offered.

You can't "improve" the audio quality of an .mp3 file by converting it to AIFF. At ten MB's a minute they would have a 300 MB file but still the quality of the source.
I would use QuickTime Player Pro to make the "movie" of the .mp3 audio track. Here's how:
Create an all black image file (one bit .jpeg format) in any image editor. Use very small dimensions (just a few pixels to keep the file size down).
Open QuickTime Player Pro and then this new .jpeg file. Command-a (Select All) and Command-c (Copy).
Open the .mp3 file using QuickTime Player Pro. Command-a (Select All) and then choose "Add to Selection & Scale" from the edit menu.
Open the Movie Properties window, highlight the new video track with a single click and then click the Visual Settings tab.
Adjust the video track dimensions from the very small size of the source to whatever works best to fit the intended display. 640X480 would probably be best.
Use the Save menu to give this new file a different name. It will now be a .mov file with an all black video track and the original .mp3 audio.

How do I use the move tool in CS5 to put two images on to an A4 sheet?

Have recently upgraded from CS3 to CS5.
I often print out two images on A4 paper. Under CS3 I would simply adjust and crop 2 images to say 7 ins x 5 ins, after that bring up a new A4 sized sheet (file, new), then using the move tool I'd move the two separate images on to the A4 sheet and print. Fine!
Now under CS5, once I've adjusted my first image then try to bring up a second image to adjust that one I seem to lose the first one from the screen. But on going back via Bridge and clicking on the image it re-appears - problem is, I lose the second image.
When I bring up a new A4 sheet neither of the images stay on the screen and there is nothing to move.
Have been into Preferences to see if there is anything there to help but can't see anything.
Does anyone know what is happening here and what I'm doing wrong i.e. how do I get 2 separate images on to an A4 sheet?
Thanks,
Bob Eveleigh.

There have been changes since cs3, mainly that cs5 uses tabs.
Tabs can be confusing if your coming from cs3.
If your in the tabbed mode, try going to Window>Arrange>Tile.
All your open documents should be visible on the screen.
If this is the cause of your frustrations, you can read more here:
http://help.adobe.com/en_US/photoshop/cs/using/WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.html #WS6389D09B-91D5-4474-9AED-C52AE33356EB
MTSTUNER

Two images at the same time

Hi!
I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
Maybe this is something easy, but I'm just starting,
thanks in advance for your answers
Message was edited by: angelcotallo

Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

Combine response of two business services in OSB

Scenario:
I have a proxy service which ahs two business service call outs depending on the system name passed to it(e.g. 'ABC', 'XYZ')
1. If the request contains 'SysName' = 'ABC', service related to 'ABC' gets called. The response is generated. (This is working.)
2. If the request contains 'SysName' = 'XYZ', service related to 'XYZ' gets called. The response is generated. (This is working.)
3. If the request contains 'SysName' = 'ALL', both the services related to 'ABC' and 'XYZ' systems should get call. The generated reponse should contains response of both the services.
Please note that, the XSDs for reqeust/response of both 'ABC' and 'XYZ' services are same.
Could you guide on steps to combine response of two business services?
Thanks-
Sachin

Hi Sachin ,
Yes u can can combine any number of service responses by using service callouts in separate/indivisual stages as it would be better to debug and trace the message flow.
U can give explicitly user defined response variable names for the service callouts action and used them in ur pipeline (eg.response pipeline)where ever u want.
U can create an xml structure like this where u r variables $responsebody_1.responsebody_2 are those which u hv defined while configuring the service callout action against the SOAP Response Body/Response Document Variable what ever u r using for calling BS
<body>
<response_1>{$responsebody_1}<response_1>
<response_2>{$responsebody_2}<response_2>
</body>
and in the end use replace actionin the last stage of response pipeline to replace the entire body/node contents with the above mentioned xml structure to combiine both responses from BS
Regards ,
Abhinav

OBIEE 11g - Combine data from two Oracle tables

Good day!
I tried to combine data from two Oracle tables as fact data, but it doesn't work.
My steps: I created SCOTT.EMP2 table from SCOTT.EMP table, update EMPNO and ENAME values of EMP2 table to distinguish data of my tables. Then I imported physical tables DEPT, EMP and EMP2 to BIEE 11g, created joins DEPT-EMP and DEPT-EMP2 in physical diagram. Then I dragged DEPT and EMP tables to BMM, and EMP2 table to EMP as second LTS. In Content tab for EMP and EMP2 I checked "This source should be combined with other sources at this level" checkboxes. Then I renamed logical tables EMP and DEPT to Employees and Departments and dragged them to Presentation area. In Answers I created Analysis with columns DNAME and ENAME.
The problem is that data on results tab is only from one physical table EMP or EMP2 (depending on the order of sources EMP and EMP2 of LT Employees) and not from both.
Can anybody help? Am I missed something?
Al.

Hi Al,
I think you have to define the content of the LTS.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_BusModSetup16.html
You have to specify the content of the different fragments.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_SetUpAggNav3.html#wp1005333
Maybe you have to add an additional column 'Source' ('EMP1', 'EMP2')
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

How do I control the quality of JPEG images?

I've written a program that scales a set of JPEG images down to various dimensions. I'm happy with the speed of execution, but quality of the images could be better. How do I specify the quality of the JPEG images I create? In graphics editors, I'm given the option of controlling the lossy-ness (?) of JPEGs when I save them, either reducing image qualify to shrink the file size or vice versa. How can I do this programmatically?
Thanks

Hi Jhm,
leaving aside the scaling algorithm, to save an arbitrary image with 100% quality you'd use
something like the following code snipet below
regards,
Owen
// Imports
import java.awt.image.*;
import com.sun.image.codec.jpeg.*;
public boolean saveJPEG ( Image yourImage, String filename )
    boolean saved = false;
    BufferedImage bi = new BufferedImage ( yourImage.getWidth(null),
                                           yourImage.getHeight(null),
                                           BufferedImage.TYPE_INT_RGB );
    Graphics2D g2 = bi.createGraphics();
    g2.drawImage ( yourImage, null, null );
    FileOutputStream out = null;
    try
        out = new FileOutputStream ( filename );
        JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder ( out );
        JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam ( bi );
        param.setQuality ( 1.0f, false );   // 100% high quality setting, no compression
        encoder.setJPEGEncodeParam ( param );
        encoder.encode ( bi );
        out.close();
        saved = true;
    catch ( Exception ex )
        System.out.println ("Error saving JPEG : " + ex.getMessage() );
    return ( saved );
}

IO - Read two image files and put them into one file

Hi,
i have 3 files in all. The two image files and one text file. I need to place the image in the first image file, followed by text in the text file and then the image in the second image file, into one file.
Can anyone tell me how do i go about doing this ?
i tried using fileinputstream and fileoutputstream, which works fine if all the 3 files have text but when the first and the third file have image, the code doesn't give any error but the result file displays only the image from the first file and nothing else.
i am running short of time and need to do this really soon.
if anyone has done anything like this. please let me know,
thanx,
poonam

One approach would be to programmatcally create a single zip/jar file from the three input files. You can use the java.util.zip and java.util.jar packages for this purpose.
The other apprach would be to create a single image by drawing images and text strings on a BufferedImage object.
I think the first approach is preferable because you can easily extract the individual files from the zip/jar file

Crappy photo quality when inserting images, how to improve?

I work extremely hard on the quality of my images and when I use iDVD they don't look to bad, but when I insert images in between video clips in iMovie the quality of the images is degraded something terrible and my professional images look like they were taken on a cheap camera phone. Exporting the videos at the highest quality helps a little, but it seems to be the import quality which is reducing them down - least that is what it appears to me.
How can I improve the photo quality in iMovie?

Hi,
Defcom has listed the main fix.
You could also try the Bandwidth setting in iChat > Preferences > Video section > Bandwidth Limit drop down.
We would suggest 500kbps for some ISPs
Using Little Snitch does show that Bonjour Video chats do use the Internet
It is probably done so that the SNATMAP Server that helps connect Video and Audio Only chats knows you are busy.
9:34 PM Tuesday; July 28, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Combine quality of two images?

Similar Messages

Maybe you are looking for