Combine rows of same value in to one row in sharepoint
I have a list with three columns and I have the same set of values in all the three rows.
column1 column2 total
a a 1
a a 1
a a 1
I would like to concatenate and display this as the following in SharePoint 2010 list
column1 column2 total
a a 3
how to create this functionality in SharePoint 2010?
Hi,
Have you consider of making use of SharePoint Designer workflow?
Assuming the situation is almost as you described in original post, we could set the condition as If value equals value, then update list item. As I tested in my environment, here are some suggestions:
Set the workflow start automatically when item is created but not changed. If it starts when the item is changed, it will run one more time since the original item is to be updated.
When we sum the value in total column, we could use intermediate variable, then do calculation, then update list item.
At the end of the workflow, delete the current item.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support
Similar Messages
-
Master/Detail? Repeating Tables - Combine data from 2 repeating tables to one cell in sharepoint
Hi there, new to infopath. I have 2 sections in my form which are hidden and display based on the department selected. So Department A versus Department B, a section opens for details pertaining to that Department. So in each
section I have similar information requirements, similar but not exactly the same. Now I was able to create hidden fields that will concat the values from both sections in the instances of similar data (i.e. Name, Department location, etc, so if Department
A fills in Name on their section, then someone else submits the same form for Department B I still have one column of metadata in SP to displace the Name regardless of department or section they filled data into). However now I am stuck, I have repeating
tables in both sections and I want to concate the entries to output to the sharepoint list for that cell. However everything I have tried so far only concats the 1st value in the repeating table. Is there a way to take ALL of the data from
two repeating tables and merge them into one column/cell in sharepoint (metadata for the one form entry)??? I want to avoid having to create a excessive "views" of a list in order to accomodate the needs for BOTH departments. I hope
this is clear. Thanks for your help!
from msn forumHi Meera,
I apologise for delay. Anyways you can goto the
following link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36f08758-0a01-0010-c291-c03004aeb1af
for details.
Hope this will clear you. However, you further require
any more information then please feel free to mail.
Note:
ty_t_sender, cl_abap_char_utilities DEFINITION LOAD
all these are present in alsmex function group if you
place your function module in this function group then
you'll be able to access these things. Further, like
if you have security options and can't place your code
in this function group then create your own function
group in your own package and copy the contents from
alsmex function group.
Hope that answer your questions.
Regards,
Mirza Ifthekhar Baig. -
Combine rows based on column value
I'm trying to combine rows based off of a common value.
Table Data:
Result A
Player_ID Player_Name Team_Name Points Sequence
99999 John Smith Bulls 50 1
99999 John Smith Pistons 14 2
What i want in the output
Result B
Player_ID Player_Name Team_Name Points
99999 John Smith Bulls 64 (50 for Bulls)Here's my main query...
select player_id, player_name, team_name, points
from
SELECT player_id, player_name, team_name, sum(points) sum_points
FROM stats_data
WHERE season_id = 2008
AND points > 0
GROUP BY player_id, player_name, team_name
) t
ORDER BY sum_points DESC, last_name;**The current query gives me the output from Result A
1) Not entirely sure how to combine data based of player_id
2) Once i figure out 1, im sure by adding the ('sum_points' for 'team_name') to the output can be done with a case statement, i think?Sorry about that Frank.
Using: Oracle 10.2g
i was incorrect about the output of the query
SELECT player_id, sum(points) sum_points
FROM stats_data
WHERE season_id = 2008
AND points > 0
GROUP BY player_id
)Output
Player_ID Sum_Points
99999 20
55455 6
66489 2 So the subquery is outputing the correct data
The output of the original entire query(that you had posted) is:
Player_ID Player_Name Team_Name Points
99999 John Smith Bulls 16 (8 for Bulls)
55455 Bob Johnson Rockets 6 (3 for Rockets)
66489 Chris Terry Kings 2 (1 Kings)Here's some more raw sample data from the table:
Player_ID Player_Name Team_Name Points Sequence Game_Type_ID Team_ID
99999 John Smith Bulls 12 1 1 5
99999 John Smith Bulls 0 1 -1 5
99999 John Smith Pistons 4 2 1 12
99999 John Smith Pistons 0 2 -1 12
55455 Bob Johnson Rockets 4 1 1 3
55455 Bob Johnson Rockets 0 1 -1 3
66489 Chris Terry Kings 2 1 1 8
66489 Chris Terry Kings 0 1 -1 8So your code frank is very close, the issue is that:
A) All players have a ('pt value' for 'team name') even if they played on the same team, which can prob. be solved with a case statement, which i tried to do in my last post.
WITH grouped_data AS
SELECT player_id, sum(points) sum_points
FROM stats_data
WHERE season_id = 2008
AND points > 0
GROUP BY player_id
SELECT g.player_id
, s.player_name
, s.team_name
(case when sequence = 2 then g.sum_points <==
|| '('
|| TO_CHAR (s.points)
|| ' for '
|| s.team_name
|| ')'
else to_char (g.sum_points)
END) AS points
FROM grouped_data g
JOIN stats_data s ON g.player_id = s.player_id
WHERE s.sequence in (1,2) <==
AND s.season_id = 2008
AND s.points > 0;the output has two issues, for players who played on more than one team, like Josh Smith the output comes out as
99999 John Smith Pistons 20 (2 for Pistons)
99999 John Smith Bulls 20While the players who played on one team came out correctly. So issue with my edit of your code is:
A) josh smith is output 2, needs to be output once
B)josh smith should say (Josh Smith Bulls 20 (4 for Pistons) not "99999 John Smith Pistons 20 (2 for Pistons)"
c) Issues with "99999 John Smith Pistons 20 (2 for Pistons)" is that it listing the wrong team for him: should be Bulls and listing half of his total with the pistons in the prentices should be 4. --The reason that is because s.points needs to be summed as based off of the data there's two entries
Hope this clears it up, thanks!
Edited by: user652714 on Mar 11, 2009 9:28 AM -
Need to concatonate multiple values for same key columns into one string
Hi...I'm attempting to use PL/SQL to read through a table containing more than one column value for a set of keys, and concatonate those values together into one string. For example, in the STUDENT table, for a STUDENT_ID there are multiple MAJORS_ACCOMPLISHED such as History, Biology and Mathematics. Each of the majors is stored in a different row with the same STUDENT_ID due to different faculty DEPARTMENT values.
I want to read through the table and write out a single row for the STUDENT_ID and
concatonate the values for MAJORS_ACCOMPLISHED. The next row should be another STUDENT_ID and the MAJORS ACCOMPLISHED for that student..etc.
I've hit a wall trying to use cursors and WHILE loops to get the results I want. I'm hoping someone may have run across this before and have a suggestion. Tks!!I think you are looking for string aggregation.
The following are the replies posted by me in the forum recently on the same case.
they might help you.
Re: Concatenating multiple rows in a table - Very urgent - pls help
Re: Doubt in a query ( Urgent )
Re: How to remove words which consist of max 2 letters?
Re: output like Name1,Name2,Name3... -
Retrieve the same value for all rows
Hi Folks,
I am a newbie to Kodo JDO. I have a little but important problem. I use a
query to retrieve data with a simple filter like PName=='A'. Normally it
should retrieve 3 rows with 3 different values but it does not. Instead I
got 3 rows but with all the same value of one row???
Do I have a configuration problem?? Oh, I forgot, I use postgresql 8.0 on
Windows...
Thx a lot....
JuergenHi,
You may want to turn on the SQL log (use the kodo.Log property, and set
the SQL channel to TRACE... for more details on logging, check out
chapter 3 in the Kodo Ref Guide) and see what SQL is being generated.
Once you see the SQL, does it look right? If you run the generated SQL
in your SQL command line, do the results match what you expect? If that
doesn't help, maybe post the SQL and some info about your mapping.
Thanks,
Greg
J wrote:
Hi Folks,
I am a newbie to Kodo JDO. I have a little but important problem. I use a
query to retrieve data with a simple filter like PName=='A'. Normally it
should retrieve 3 rows with 3 different values but it does not. Instead I
got 3 rows but with all the same value of one row???
Do I have a configuration problem?? Oh, I forgot, I use postgresql 8.0 on
Windows...
Thx a lot....
Juergen -
Qry return same value for a particular column for each row but not all time
hi,
We recently migrated to Oracle Database 10.2.0.3.0 from 9i. We were using a sql to populate a table and it had been running fine. After migration the same sql is fetching / population incorrect values, but not everytime. If we run the same sql again it gives a correct result.
Ex:
insert into a1 ( col1, col2, col3 )
select a.field1, b.field2, c.field
from tab1 a, tab2 b, tab3 c
where a.field = b.field
and b.field (+) = c.field
something like this. Let us assume it fetches 200 rows
But sometimes the col1 has the same value for all the 200 rows and col2, col3 has correct values. If we run the same sql next time, the col1 fetches the correct value and everything is correct.
Could someone help on the above issue.I know it's difficult but can you put together a small test case for us to reproduce this behaviour? Did you contact Oracle Support?
Any special constructs used behind the scenes? Virtual private database? Views?Materialized Views? Anything else? -
About give from one query to other the same value of a variable
Hi Gurus,
my problem is About give from one query to other the same value of a variable, i have a wad with a view, and this wad has some bottoms in javascript to go to anothers wad with charts, the problem is when i ran the query one, i put a value = calyear:2008 (Obligatory Variable), but when i click the bottom to go to the other query with the same variable, he ask me again a value,
i want write a value just one time, and the others wad can recieve the first value that i put when the wad opened.
i really need it , thanks !Hello Jorge,
What you need here is Replacement path variable. Check out this link for more details:
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/589b3c494d8e15e10000000a114084/content.htm
In the second query where you need the value (calyear:2008 from first query) create a Variable for calyear of type Replacement path, in Replacement tab you can select either query or variable by which it has to replaced. In your case, it has to be variable from the first query.
Do let me know if this works. If this does not work I suggest you to use Web APIs to replace the variable values using Web APIs. Check out the details:
http://help.sap.com/saphelp_nw2004s/helpdata/en/29/4d15422ecce02ce10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Srini -
An example would be Jackson Browne's "The Load Out" &" Stay".They should play one after the other but in a play
list on shuffle setting they don't. How do I combine two songs so they play as one in a shuffled playlistFriveros wrote:
When I import my music files to iTunes will I be creating new files for every file I import? If the answer is YES; where are those files going to be stored and how much space will they use?
To begin with you can't manage FLAC in iTunes. The use of iTunes is at this moment limited to WAV, AIFF, Apple Lossless, AAC and MP3. But that's not a problem because if I understand you correctly you want to organize the MP3-files in iTunes.
When you import music files you can let iTunes copy all files and put it in an iTunes-media-Folder. You can make the choice in preferences-->tab advanced.
If you deselect the second blue checkbox (sorry, in Dutch) iTunes won't copy files as you import the files in your library. It will use the files from the place they are on the disk now. So you have a choice. But if you want iTunes to copy them, they will be placed in a folder called iTunesMedia. This is how it placed on your disk.
All files will be put in one music folder well ordered by artist and albums. If you want to make a backup of all your music you just have to copy the iTunes folder to another disk. You can backup all music at once. How much space they will use depends on the bitrate of the MP3 and whether you add more tagging to it. You can have iTunes add album artwork. That means adding gif or jpg files to your library. Are you using bitrate 320 for your MP3?
If you tell me I can give you estimates on the disk-space you will need. -
Retruning rows which have same value return by RANK function
Hi, what I wanna acheive is to use a DENSE RANK function to identify the same value of the data, if rank values are same then extra out. Here is the code
WITH CTE AS
SELECT SalesPersonID,
SalesQuota,
DENSE_RANK() OVER (ORDER BY SalesQuota DESC) as DENSE_RANK
FROM Sales.SalesPersonQuotaHistory
WHERE SalesQuota BETWEEN 266000.00 AND 319000.00
)This retrun
SalesPersonID SalesQuota DENSE_RANK
280 319000.00 1
287 304000.00 2
280 301000.00 3
282 288000.00 4
283 284000.00 5
287 281000.00 6
278 280000.00 7
283 280000.00 7
283 267000.00 8
278 266000.00 9How could I select those rank value which are same value ??
The result should be
278 280000.00 7
283 280000.00 7with cte as
select salespersonid,
salesquota,
dense_rank() over (order by salesquota desc) as dr
from sales.salespersonquotahistory
where salesquota between 266000.00 and 319000.00
select *
from (
select cte.*, count(*) over(partition by dr) ct
from cte
where ct > 1 -
Max two same value in one field
Hi,
I have a project in hand. I can't figure out how to deal with
it. I am not
very good at manual script. I can handle on my own, though.
My problem is I need check in the insert page if a certain
value is in that
field two time. If so, I do not want the visitor to insert,
and system to
warn the visitor to insert another value for the selected
field.
For example, below, for the file code, if the
visitor/operator inserts 314,
it should give error because there are two records whose
file_code field
containing 314.
file_id filename file_code
1 dummyname 225
2 dummyname 314
3 dummyname 225
4 dummyname 314
5 dummyname 532
6 dummyname 756
7 dummyname 225
8 dummyname 987
Thank you indeed
HakanOK, just noticed that you want to allow two of the same
value, but no more than two.
In that case, before inserting , just perform a select count
using the attempted insert value in the where clause. If less than
2 allow the insert, otherwise display the error. -
How to restrict user to not enter same value in tabular form
Greetings !
i m asking second time the questiion because i was not answered preivously, so please dont mind if it is a duplicate one,
question was: i created tabular form as shown in example.
i want to validate username as you see in my example to restrict user to enter the same value in username field before submit page.
e.g when user is entering data as u see test in username in first row, when he/she goes to second row and type the same username like test " message will appear or restrict user that already typed or in use"..
http://apex.oracle.com/pls/apex/f?p=45296:1:22797340776918:::::
this all be done on typing before submit record.
please gudieHi,
i m asking second time the questiion because i was not answered preivously, so please dont mind if it is a duplicate one,question was: i created tabular form as shown in example.
i want to validate username as you see in my example to restrict user to enter the same value in username field before submit page.
e.g when user is entering data as u see test in username in first row, when he/she goes to second row and type the same username like test " message will appear or restrict user that already typed or in use"..
http://apex.oracle.com/pls/apex/f?p=45296:1:22797340776918:::::
this all be done on typing before submit record.>
Stick the below code in the Page Header > Javascript > Execute when Page Loads field.
$('[input[name="f03"]').blur(function(){
if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
alert('Duplicate Entry.');
var x = $(this).attr('id');
setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
})Note :
a.f03 is the "name" of your username column in the Tabular form.
b. This validates only the displayed values . If your Tabular Form has multiple pages then all the rows not currently displayed will be ignored.
Cheers, -
"ORA-19025 EXTRACTVALUE returns value of only one node" - Suggestion
ORA-19025 EXTRACTVALUE returns value of only one node
When this error occurs, would you please provide some or all of the following information:
(1) row number
(2) row id
(3) the name of the offending column
(5) the XQuery expression
(6) the node name
(7) the text value being parsed, in which an excess node was found
and would you consider processing every good row, assuming it may be correct,
because, in 13 thousand lines generated by my view, there is unlikely to even one more row in error.
Thank you,
Mike Rainville
FYI,
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
ojdbc6.jar 11.1.0.7.0Thanks for the suggestion...
The problem is that in one row, information in a data dump about two different things was combined into one, due to a gap in the input file. The starting delimiter for the second thing and the ending delimiter for the first were missing. The result was that many entity tags that should have been unique were duplicated, ion that particular row.
I was able to guard the view against future such errors with occurrences using this
in the WHERE clause ...
AND NOT ( XMLCLOB LIKE '%<TAG1>%<TAG1>%'
OR XMLCLOB LIKE '%<TAG2>%<TAG2>%'
OR XMLCLOB LIKE '%<TAG3>%<TAG3>%'
/* ... Repeated once for each tag used with extractvalue */
OR XMLCLOB LIKE '%<TAGN>%<TAGN>%'
It filters out any row with two identical starting tags, where one is expected.
I am pleased to see that the suggestion got through. -
Updating PK with same value - effect on CASCADE UPDATE
Hello,
I would like to understand how sql server 2008 deals with cascade updates
For example I have
Parent table: Employee with column Id as varchar(20) primary key
Child table with IdEmployee as varchar(20) foreign key
I set up Cascade Update for those two tables, meaning any change to primary key in Employee table will cause update in child table rows that match affecting Id
Scenario 1:
Update Employee
set Id = 'ABC',
Name = 'something new'
where Id = 'CCC'
Result of child table: all rows with foreign key IdEmployee and value of 'CCC' are updated. Expected behavior.
Scenario 2:
Update Employee
set Id = 'ABC',
Name = 'something new 2'
where Id = 'ABC'
This time, i am doing something different. I am beside update of column Name with new value, also update primary key but
with SAME value
Question is: what is going to happen to child rows? Are they ALL going to UPDATE due to CASCADE UPDATE
So far, what i did in order to find solution is:
1. I put an timestamp column in child table that should update each time row gets updated
2. I put a trigger for update event on child table that will write something to some log table
*After I set up those two I ran example like above just to be sure timestamp gets changed as well trigger is being fired
Results of updating PK with same value:
1. Timestamp didnt change
2. Trigger didnt fire
Is this enough to make conclusion that updating primary key with same value ALONG with updating some other columns won't
affect child tables with UPDATE CASCADE ON
Update:
Database is CI AS collation
If i do following
Update Employee
set Id = 'abc',
Name = 'something new'
where Id = 'ABC'
1. Timestamp will change
2. Trigger will fire
Conclusion: Case sensitive is important here!
Thank you very much in advance
Milos>> would like to understand how sql server 2008 deals with cascade updates <<
Your posting has a number of conceptual errors.
1. The terms “parent” and “child” are not RDBMS; they are used in network databases. We have “referenced” and “referencing” tables; they can be the same table.
2. A table models a SET of things, so there is no “Employee” table unless you truly have a one-man company. We want a collective or plural name for the SET/table. A better name is “Personnel” for this table.
3. Her is no such thing as a generic “id” in RDBMS; it has to be “<something in particular>_id” to be valid. Identifiers are usually fixed length
4. It is very, very rude not to post DDL on a forum. You also do not know the ISO-11179 Rules for data element names. They do not change names from table to table! Does your name change whenever you use it in a new place?? NO! Same principle with data.
5. The ISO standard uses “<property>_<attribute property>” syntax, no the old PascalCase.
6. Why did you post a useless narrative? How do we compile “I SET up Cascade UPDATE for those two tables,..” to test it??
CREATE TABLE Personnel
(emp_id CHAR(20) NOT NULL PRIMARY KEY,
emp_name VARCHAR(25) NOT NULL,
CREATE TABLE Health_Plan
(health_plan_acct CHAR(20) NOT NULL PRIMARY KEY,
emp_id CHAR(20) NOT NULL
REFERENCES Personnel(emp_id)
ON UPDATE CASCADE
ON DELETE CASCADE,
Scenario 1:
UPDATE Personnel
SET emp_id = 'ABC',
emp_name = 'something new'
WHERE emp_id = 'CCC';
Result of child table: all rows with foreign key emp_id and value of 'CCC' are updated. Expected behavior.
Scenario 2:
UPDATE Personnel
SET emp_id = 'ABC',
emp_name = 'something new 2'
WHERE emp_id = 'ABC';
This time, I am doing something different. I am beside UPDATE of column emp_name with new value, also UPDATE PRIMARY KEY but
with SAME value.
>> Question is: what is going to happen to child [sic: referencing] rows? Are they ALL going to UPDATE due to CASCADE UPDATE. <<
SQL uses a set-oriented model, so the whole table is updated as a unit of work in theory.
So far, what I did in order to find solution is:
>> I put an timestamp column in child [sic: referencing] table that should UPDATE each time row gets updated <<
Why? It is not in the SET clause list; it cannot change. As an aside, The T-SQL TIMESTAMP is not the ANSI/ISO TIMESTAMP; it is DATETIME2(n) in T-SQL. The old TIMESTAMP is being deprecated because it stinks both in concept and implementation.
>> I put a trigger for UPDATE event on child [sic: referencing] table that will write something to some log table.<<
TRIGGERs are fired by what is called a “database event” shown in the ON [DELETE | UPDATE] clause. T-SQL adds INSERT as an event. An update to any value or to no value at all is still an update. Depending on the collation, case may or may not matter in the final
outcome.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Is it possible to store a multiple indexes for the same value extractor?
I ran into a situation where there were different queries that I was interested in doing that might have benefitted from having several indexes, sorted differently, but for the same ValueExtractor() instance.
Is this good practice, is it recommended, and is there a clean way to do it? It seemed like the only way I could logically "trick" the system into it would be passing some sort of "query type" constant into the ValueExtractor when it was created, and then making the equals and hashCode() methods on the ValueExtractor delegate to the constant for equality, but this seemed like a massive hack.Hi Kris,
First, try without each value extractor and see how the different queries compare in performance. You may find that you need only one. If you find otherwise, please let us know because it may indicate a good area for additional optimizations.
Second, you are correct that the value extractor is the key of the index, and thus to have two indexes on the same value, you will need two different value extractors (i.e. the hashcode/equals comment you made.)
Peace,
Cameron Purdy
Tangosol, Inc.
Coherence: Easily share live data across a cluster! -
ME21N - new field added and same value posted to it for all line items
hi all
i have added new field under item level in me21n screen.
data for new filed fetched from tables with values entered in header level material number.
For one record, it is ok
but for multiple records, same value is fetched for all line items
i have written coding in screen exit for 0111
and function exits EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
how to solve
pl help
regards
senthilMODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
if sy-tcode eq 'ME23N' or sy-tcode eq 'ME23'.
LOOP at SCREEN.
if screen-group1 ne 'PCS'.
screen-input = 0.
MODIFY SCREEN.
endif.
ENDLOOP.
ENDIF.
TYPES : BEGIN OF ty_cabn1,
atnam TYPE cabn-atnam,
end of ty_cabn1.
DATA : itab_cabn1 TYPE STANDARD TABLE OF ty_cabn1 INITIAL SIZE 0,
wa_cabn1 TYPE ty_cabn1.
TYPES : BEGIN OF ty_cawn1,
atinn TYPE cawn-atinn,
atzhl TYPE cawn-atzhl,
atwrt TYPE cawn-atwrt,
end of ty_cawn1.
DATA : itab_cawn1 TYPE STANDARD TABLE OF ty_cawn1 INITIAL SIZE 0,
wa_cawn1 TYPE ty_cawn1.
TYPES : BEGIN OF ty_cawnt1,
pcs TYPE cawnt-atwtb,
atinn TYPE cawnt-atinn,
atzhl TYPE cawnt-atzhl,
atwtb TYPE cawnt-atwtb,
end of ty_cawnt1.
DATA : itab_cawnt1 TYPE TABLE OF ty_cawnt1,
wa_cawnt1 TYPE ty_cawnt1.
TYPES : BEGIN OF ty_pcs1,
pcs TYPE cawnt-atwtb,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
end of ty_pcs1.
DATA : itab_pcs3 TYPE TABLE OF ty_pcs1,
itab_pcs4 TYPE TABLE OF ty_pcs1,
wa_pcs1 TYPE ty_pcs1.
TYPES : BEGIN OF ty_pcsn,
matnr TYPE ausp-objek,
ebelp TYPE dynpread-stepl,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
END OF ty_pcsn.
DATA : itab_pcsn TYPE TABLE OF ty_pcsn,
wa_pcsn TYPE ty_pcsn.
TYPES : BEGIN OF ty_ausp1,
objek TYPE ausp-objek,
atinn TYPE ausp-atinn,
atwrt TYPE ausp-atwrt,
END OF ty_ausp1.
DATA : itab_ausp1 TYPE STANDARD TABLE OF ty_ausp1 INITIAL SIZE 0,
wa_ausp1 TYPE ty_ausp1.
DATA : param_name1(35) TYPE c.
DATA: progname1 TYPE sy-repid,
dynnum1 TYPE sy-dynnr,
dynpro_values1 TYPE TABLE OF dynpread,
dynpro_values2 TYPE TABLE OF dynpread,
field_value1 LIKE LINE OF dynpro_values1,
ematn1 TYPE mara-matnr.
if sy-tcode ne 'ME23N' and sy-tcode ne 'ME23'. "psk
clear : itab_cabn1,itab_cawn1,itab_cawnt1,itab_pcs3,itab_pcs4,itab_pcsn,itab_ausp1.
clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
if sy-uname eq 'IBM_ABAP'.
param_name1 = '000000001'.
else.
param_name1 = '000000013'.
endif.
SELECT atnam
FROM cabn
INTO CORRESPONDING FIELDS OF TABLE itab_cabn1
WHERE atinn = param_name1.
select *
FROM cawn
into CORRESPONDING FIELDS OF TABLE itab_cawn1
WHERE atinn = param_name1.
if itab_cawn1[] is NOT INITIAL.
SELECT atinn atzhl atwtb
FROM cawnt
INTo CORRESPONDING FIELDS OF TABLE itab_cawnt1
FOR ALL ENTRIES IN itab_cawn1
WHERE atinn = itab_cawn1-atinn
AND atzhl = itab_cawn1-atzhl.
endif.
if itab_cawnt1[] is NOT INITIAL.
sort itab_cawnt1 by atinn atzhl.
loop at itab_cawnt1 INTO wa_cawnt1.
READ TABLE itab_cawn1 INTO wa_cawn1 with key atinn = wa_cawnt1-atinn
atzhl = wa_cawnt1-atzhl BINARY SEARCH.
if sy-subrc eq 0.
CONCATENATE wa_cawn-atwrt '->' wa_cawnt-atwtb INTO wa_cawnt-pcs.
MODIFY itab_cawnt FROM wa_cawnt TRANSPORTING pcs.
wa_pcs-pcs = wa_cawnt-pcs.
wa_pcs1-atwrt = wa_cawn1-atwrt.
wa_pcs1-atwtb = wa_cawnt1-atwtb.
append wa_pcs1 to itab_pcs3.
ENDIF.
CLEAR : wa_cawnt1,wa_cawn1, wa_pcs1.
ENDLOOP.
ENDIF.
CLEAR: dynpro_values1, field_value1.
dynpro_values-FIELDNAME = 'MEPO1211-EMATN'.
APPEND dynpro_values.
field_value1-fieldname = 'MEPO1211-ematn'.
APPEND field_value1 TO dynpro_values1.
progname1 = 'SAPLMEGUI'.
dynnum1 = '1211'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = progname1
DYNUMB = dynnum1
TRANSLATE_TO_UPPER = ' '
REQUEST = 'A'
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
START_SEARCH_IN_CURRENT_SCREEN = ' '
START_SEARCH_IN_MAIN_SCREEN = ' '
START_SEARCH_IN_STACKED_SCREEN = ' '
START_SEARCH_ON_SCR_STACKPOS = ' '
SEARCH_OWN_SUBSCREENS_FIRST = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
DYNPFIELDS = dynpro_values1
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE dynpro_values1 INTO field_value1 with KEY fieldname = 'MEPO1211-EMATN'.
LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
clear ematn1.
if sy-subrc eq 0.
ematn1 = field_value1-fieldvalue.
endif.
if ematn1 is not INITIAL.
clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = ematn1
IMPORTING
OUTPUT = ematn1.
select *
FROM ausp
INTO CORRESPONDING FIELDS OF TABLE itab_ausp1
WHERE objek = ematn1
and atinn = param_name1.
CLEAR itab_pcs4.
if itab_ausp1[] is not INITIAL.
sort itab_ausp1 by atinn atwrt.
sort itab_cawn1 by atinn.
READ TABLE itab_ausp1 INTO wa_ausp1 INDEX 1.
loop at itab_cawn1 INTO wa_cawn1 WHERE atinn = wa_ausp1-atinn AND atwrt = wa_ausp1-atwrt.
READ TABLE itab_cawnt1 INTO wa_cawnt1 WITH KEY atinn = wa_cawn1-atinn
atzhl = wa_cawn1-atzhl.
if sy-subrc eq 0.
wa_pcs1-atwrt = wa_cawn1-atwrt.
wa_pcs1-atwtb = wa_cawnt1-atwtb.
append wa_pcs1 to itab_pcs4.
wa_pcsn-matnr = wa_ausp1-objek.
wa_pcsn-ebelp = field_value1-stepl.
wa_pcsn-atwrt = wa_cawn1-atwrt.
wa_pcsn-atwtb = wa_cawnt1-atwtb.
APPEND wa_pcsn to itab_pcsn.
ENDIF.
clear : wa_ausp1,wa_cawn1,wa_cawnt1.
ENDLOOP.
ENDIF.
clear wa_pcs1.
read TABLE itab_pcs4 into wa_pcs1 index 1.
if sy-subrc eq 0.
EKPO_CI-ZPCS = wa_pcs1-atwrt.
endif.
ENDIF.
ENDLOOP.
CLEAR: field_value1.
LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
clear wa_pcsn.
if field_value1-fieldvalue is not INITIAL.
read TABLE itab_pcsn INTO wa_pcsn with key matnr = field_value1-fieldvalue
ebelp = field_value1-stepl.
if sy-subrc eq 0.
clear EKPO_CI-ZPCS.
*EKPO_CI-ZPCS = wa_pcs1-atwrt.
EKPO_CI-ZPCS = wa_pcsn-atwrt.
endif.
endif.
ENDLOOP.
CLEAR: field_value1, dynpro_values1.
progname1 = 'SAPLXM06'.
dynnum1 = '0111'.
field_value1-fieldname = 'EKPO_CI-ZPCS'.
APPEND field_value1 TO dynpro_values1.
if ematn1 is not INITIAL.
clear wa_pcs1.
read TABLE itab_pcs4 into wa_pcs1 index 1.
if sy-subrc eq 0.
EKPO_CI-ZPCS = wa_pcs1-atwrt.
endif.
ENDIF.
endif.
ENDMODULE. " STATUS_0111 OUTPUT
Function exits:
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_016
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U41 .
DATA XFISTL LIKE EKPO-FISTL.
TABLES: ADRC, T001W.
DATA: PLANT LIKE T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = I_EKPO-WERKS.
SELECT SINGLE * FROM ADRC WHERE ADDRNUMBER = T001W-ADRNR.
XFISTL = ADRC-SORT2.
SET PARAMETER ID 'FIS' FIELD XFISTL.
* Added For PCS 12.11.2010
DATA : fs_ekpo type EKPO_CI.
if sy-tcode = 'ME22N' or sy-tcode = 'ME23N'.
* if tekpo-zpcs is INITIAL.
* message e000(zmm) with 'PCS Type should be chosen'.
* endif.
loop at tekpo.
if ( tekpo-ebeln eq i_ekpo-ebeln and tekpo-ebelp eq i_ekpo-ebelp ).
ekpo_ci-zpcs = tekpo-zpcs.
endif.
ENDLOOP.
endif.
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_018
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U40 .
E_CI_EKPO-ZPCS = EKPO_CI-ZPCS.
E_CI_UPDATE = 'X'.
Maybe you are looking for
-
How do I create an Archive Mailbox for a pop3 account on an iPhone4?
How do create an Archive Mailbox for a pop3 email account on an iPhone4 running iOs6?
-
Hi all: Please I want help for getting and send data to access 2003, I am starting developments this issue in Labview.. Can any one help me to build vi application the send data to access and update the file , then get the data again - its kind of li
-
Transactional Replication configure into different domains
Hi team, We have two domain, we need actual data immediate from domain one to domain two. In this scenario we are paling to configure the transactional replication from domain one to domain two. How to configure the transactional replication for diff
-
Conditional Branching in Oracle Service Bus
Can anyone help me to find one sample project on Conditional Branch in OSB. The main difficulty I am facing is to fetch the plain text value (which will be used to choose the branch) from an xml node using XPath. I think one example project on Condit
-
Insignia Receiver Use of HDMI-Thru Feature
I have an Insignia home theatre receiver model #ns-r5101ahd-a that I purchased two months ago. I have not been able to figure out how to activate the HDMI thru feature which I assume allows the televison to receive the HDMI signal without the receive