Combined delivery with different delivery dates:

Combined delivery with different delivery dates:
We are experiencing a problem when doing combined delivery from multiple orders of the same ship to party.
All the requirements are being met (for the order combination) accept the Delivery dates.
Sometimes an order Qty is confirmed on the 1at of a month , then the second order qty is confirmed on the 15th of the month. But when we want to make the combined delivery , the delivery dates differ and the user has to go into the individual order ans changes the dates.
Is there a way to make the combination, the system not taking in account the delivery dates? Because we have huge no. of orders to combine. Please guide.
Regards,
Mansur.

Dear Mansur,
I think there is no any solution exaclty map with your problem in standard SAP.
Better you control based on the MRP type, not sure. And also check with availability check and tranfer of requirments.
Thnx,
Pratik

Similar Messages

Combine stock transfer orders with different delivery dates into 1 delivery

Hello,
In transaction VL10B, the system normally combines stock transfer orders that have the same ship-to-party and same delivery date (if the combination indicator in the customer master specific to sales and distribution is checked). My business requirement is to combine stock transfer orders that have the same ship-to-party but different delivery dates. Is this possible through standard configuration? Is there a user exit that can allow this?
At the moment the system is creating different outbound deliveries according to the delivery dates specified in the stock transfer orders.
Please advice a solution.
Regards,
Felipe

Felipe, please have a look at OSS note 386340, it may help to solve your problem about combining STO items with different delivery dates to one delivery (as I understand the code correction overwrites the delivery dates...).
Edited by: Csaba Szommer on Jan 21, 2011 5:06 PM

Standard PO with different delivery dates

Hai All,
Pls. clafiry my below query.
e.g. my PR Qty may be 30 PC (in one line item)
I want to create the PO in one line item with different delivery dates.
Like: 10 PC 15.12.2008
10 PC 20.12.2008
10 PC 25.12.2008
Rams

Hi,
In ME22N, on "Delivery Schedule" tab you can set manually on which dates the shipments should come.
If you want to have the right date for the PO item, you should carry out your settings accordingly to get proper results after MRP run. However, you cannot set MRP (as per my best knowledge) to create several Delivery date for one PR - MRP will create a separate PR for each different date.
Regards,
Csaba

Delivery is pulling items with different delivery dates from sales order

hi all,
i have a sales order with two line items with different delivery dates(eg 1st and 21st). material availability date for them is different. when i tried to create the delivery on 1st it is pulling the 2nd item whose delivery date is on 21st.
where can i control this.
thanks in advance
harini

Hi,
let us take one example>materials A and B,
A delivery date is 22.01.2008(maintained in schedule lines in SO)
B delivery date is 30.01.2008(maintained in schedule lines in SO)
now i want to deliver material A on 22.01.2008
by default system will give you only material A in the item line
material B will not be displaced in the second line item
now i want to deliver material B on 30.01.2008
by default system will show me material B in delivery line item
if in case material A is not delivered then delivery will show you two line items
i.e., Material A and B
i think you have understood the difference
regards,
US

Users with different delivery dates

Hi ,
Two users entering a sales order with same master data of customer, material and quanty are having different delivery date at item level?
Any reasons?
Thanks,
Pramod

Hello Friend,
The problem could be stock could be less and the first order would have blocked that stock so for the second order based on Material Availability Date in Sales Document Type, Scheduling in Material Master MRP2 View and Shipping Point Picking and loading time it is giving a different material availability date based on all these parameters.

Partial Delivery in Sales Order with Different Delivery Dates

Dear All,
In Sales Order we need to specify the different delivery dates for the items ( Partial Delivery ).
Ex: If I add one sales order for 20 qty of an item today.I need to specify 5 nums to be delivered on immediately
and next 10 qty i need delivered on after 15 days and rest of the remaining qty delivered on after another 15 days.
How we configure in SAP B1 Sales Order.
Please guide me.
Thanks in advance.
- Rajesh

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Consolidation multiple STO PO to Create one Delivery with the same date

Hi:
Want to create one delivery notes from mutiple STO PO using VL10B.
with the same delivery date.
How to do it

Basically the criteria to combine more than one STO into one single delivery
is STO delivery date and receiving plant. If they are the same then one delivery
is created and different delivery items are summed.
Good reference available in SAP notes:
386340 - Grouping purchase orders into one delivery using Vl10*
There is more information in another existent thread:
Combine STO into same DN

Delivery split with different delivery types

Hi,
Ive got the following problem with delivery split:
In my order (type ZTA) I have two items with two different item categories (for example TA1 and TA2). For these two items two different deliveries with two different delivery types (for example item TA1 in LF1 and TA2 in LF2) should be created. For this I implemented the needed copy control and in the customizing of the order type ZTA I maintained LF1 as a default delivery type. When I deliver the order manually via Transaction VL01N, I have no problem, because the system delivers first the item which can be delivered with delivery type LF1. Then I have to start VL01N again, predefine LF2 as delivery type and then the other item will be delivered with LF2. But this doesnt work in the Batch Collective Processing with VL04, VL10A or even VL10Batch. The system cant deliver the order. And in none of these mentioned transactions I have the possibility to predefine a delivery type. I tried also a routine in the copy control on item category level where I want to switch to a different delivery type in case of the second item category. But it didnt work. And I couldnt find any other appropriate exit how to influence the delivery type on base of the item category. What cant be changed is probably that I will always have to deliver this order two times because the system wont be able to split the order in one collective processing and create two deliveries at once. That wouldnt be a big problem if I could predefine the delivery type for the second collective processing in order to get the second item delivered.
Is there anybody who can help me?
Kind Regards
Stephan

Hi,
thank you for your quick answer. That was a big help and I will do your suggested solution with the BDC.
But if I understand you correctly, you also didn't find a solution for this problem in the SAP Standard functions (without BDS)?
Kind regards
Stephan

Cube with different reports data

Hi
We have 3 different Reports based on a Multi which has only one Infocube.
We have new design policy that any New different report that needs to be created should be based only on this Multi and all data should be loaded only into this only infocube on which this Multi is based.
So for the existing 3 reports,we have three different database views in source database.Fullload will be done from source every weekend(previous week's request will be deleted every week) of snapshot data into three different DSOs from these three different datasources.(Its new policy that every report should have its own DSO ).All these 3 DSOs should be connected to only one cube on which our reporting Multiprovider is based.So from these 3 DSOs,data will be loaded into cube in fullload every weekend(previous week's request will be deleted)
Now my question is:
1.when all the data is going to cube from three different views and DSOs(with different keyfigures but some same characteristics in 3 DSOs),how can our 3 different reports pick data that is relevant for it when all data is pooled together in one big cube?Doesnot aggregation happens?
(When a report is run,does OLAP processor goes into cube and picks only those keyfigures and characteristics in cube thats relevant for that report and by that way,avoids other data??)
2.I need to create one new report.For this I need to create one new view and one new DSO.So,data will be loaded from view to DSO and this DSO will be connected to existing cube(new dataflow until cube from source view).But our cube doesnot contain one keyfigure.It contains all other characteristics and keyfigures from DSO.
a)How can I add this new keyfigure from new DSO to cube without disturbing existing data in cube.I donot need to load historical data for this new keyfigure and new report.
b)I am going to transport this from development.So what care do I need to take while transporting changes to Production cube which contains lots of data and many reports running on it?
Thanks.

*1.when all the data is going to cube from three different views and DSOs(with different keyfigures but some same characteristics in 3 DSOs),how can our 3 different reports pick data that is relevant for it when all data is pooled together in one big cube?Doesnot aggregation happens?
(When a report is run,does OLAP processor goes into cube and picks only those keyfigures and characteristics in cube thats relevant for that report and by that way,avoids other data??)*
It will depend on what Key Figures you are displaying in your report. If a KF is coming from only 2 DSOs, data from those 2 DSOs will be displayed. And you are right in saying that OLAP processor will pick only releavnt KFs and Characteristics but it will not filter based on characteristic value e.g. if a characteristis is coming only from DSO 1 and not from DSO2, but KF is coming from both, so for the data in DSO 2 that characteristic will be displayed as #. If you want to filter data, you can put filters in the report.
Another good option can be to store the DSO name as a characeteristic in your cube, it might be helpful if you want to make a reprot based on data from a particular DSO, then you can put the filter based on DSO name.
*2.I need to create one new report.For this I need to create one new view and one new DSO.So,data will be loaded from view to DSO and this DSO will be connected to existing cube(new dataflow until cube from source view).But our cube doesnot contain one keyfigure.It contains all other characteristics and keyfigures from DSO.
a)How can I add this new keyfigure from new DSO to cube without disturbing existing data in cube.I donot need to load historical data for this new keyfigure and new report.
b)I am going to transport this from development.So what care do I need to take while transporting changes to Production cube which contains lots of data and many reports running on it?*
You are adding a new KF which is coming only from new DSO, so you do not need to worry about a lot of things, you can move your changes to procudtion and load data from this new DSO. Data which is already there in the cube will not be impacted.
Regards,
Gaurav

Same Batch with different expiry dates

Dear all,
My vendor produced the same batch Y28 at an interval of 3 days eg 10/10/2008 , 11/10/2008, 12/10/2008 with an expiry date of 1year.
He sent in the batch Y28 to me with the following expiry date 10/10/2009, 11/10/2009 and 12/10/2009.
During GR, I need to enter the expiry date. However, I realised that the Batch Master for the same batch can only have 1 expiry date. I end up with the latest expiry date of 12/10/2009.
Could anyone advise on how the above scenario sould be handled?
Can I maintain 3 different expiry date for the same batch?
Is it a norm that the same batch can have different expiry date?
Thank you

You should create a separate batch per day, if you really think that the exact date of expiry matters for a material that has a shelf life of one year.

Combining clips with different properties

Hello
If you have mixed-property clips on the timeline and wish to combine them into one MPEG movie to be viewed on the PC before being burnt to a DVD, which Presets and Export Settings would produce the best quality results?
I am thinking of clip A with the following attributes (screenshot Clip_A)
and clip B with its own attributes (screenshot Clip_B),
but there may be more than two clips. Perhaps a third MP4 clip has PAL properties with different frame sizes to the clips above?
Thanks
Steve

Hello John
Thank you for your post.
I think I know what you mean: a thick black frame around the clip?
Can I ask: is AVCHD the 'heaviest' (best quality) type of file compared to the others? The alternatives I can see are: Publish+Share | Computer | Flash (or MPEG, or AVCHD, or AVI, or Windows, or Quick Time).
Thanks again!
Steve

Invoice List Consolidation with different billing date

Hi!
Want to consolidation different billing date billings into 1 invoice list!
but system will split it,
How can I do??
Thanks

Hi,
Please check note 317935 Invoice Split Criteria for Invoice Lists
Different Billing Dates for the invoice list from the original invoices will automatically cause invoices to split into multiple invoice lists. This is standard functionality. The primary way to avoid this is to enter a date as a default billing date in transaction VF21 or to modify the report from transaction VF24.
If you do not enter a default billing date and the dates from the individual invoices differ, than the invoice lists will be split into as
many invoice lists as there are different dates.
Regards,
Alex

Purchase requisition to purchase order with different delivery dates

Hi, Could any body explaon me , when ever a Purchase order is created with ref to purchase requisition the delivery dates can not be split up .(system shows an error message : error in net px calculation).
Please revert back with your suggestions.
Regards
Bheema

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Different PO through SOCO with different delivery address

Hi,
We are facing issue with sourcing cockpit. While creating purchase
order for multiple shopping carts through Sourcing cockpit, If multiple
line item have different shipping location it is creating different
Purchase orders.
We have requirement to create one PO with same vendor for multiple line
items. For above problem we are keeping same vendor even though it
creates two seperate POs.
Kindly advise.
Thank you
Ritesh

Hi Ritesh,
Please check the answers in this thread :
PO split in sourcing cockpit ? :-(
BADI BBP_SC_TRANSFER_BE
Method GROUP_PO
Kind regards,
Yann
Message was edited by: Yann Bouillut

Return delivery with via delivery indicator

I am trying to post return delivery through MIGO transaction, with selecting ' via delivery' indicator. I am getting an error - data for creating a delivery is incomplete (Customer).
I am selecting this indicator first time so that I can get delivery number which I can print later.
How can I resolve this error ?

Before creating return delivery via MIGO..Please check the following master data..
1) Check the material is having Sales view
2) Check you linked vendor master to the customer...
3) Also check whether you flagged Returns vendor in the purchasing view of the vendor master record..
Please check these master data settings if any one of above things are missing system would not allow you to process the return delivery..
I hope it will resolve your issues. If it helps award me the points..
Cheers
Umakanth

Combined delivery with different delivery dates:

Similar Messages

Maybe you are looking for