Combined Video Files are 3gb - DVD is Full - Help?

Hi there,
I am trying to author a simle DVD using Encore.
My combined mpg's (10 in total) are approx 3gb in volume - i have imported them as time lines.
I have a psd menu that i created in photoshop, which is less than 1mb, and i have a song which is 3mb.
When i try and build this project  it tells me that my disc is full and does not have enough room (blank DVD-R, 4.7gb) - apparently i need 5.3gb.
Can anyone help me out here - im new to DVD authoriing etc and i have no idea where this hike in data volume has come from.
kindest regards,
Neil

Hi there,
firstly many thanks for all your replies.
The videos were exported from Premiere as MPEG2-DVD (see last image below)
I can confirm, there is no additional ROM content (that I am aware of and I think I have checked). The audio file is mp3 and transcode settings have been set to "do not transcode"
What I have now done is start a new project, and take screen captures along the way - i have only used one of my video's. When looking at the file size in both windows explorer and encore project panel - it is 184.9mb.
When looking a the amount of data used on my DVD (on the build screen) - it shows as 409.7mb used (minus 526kb reserved for ROM content - which i have not added),
Its a strange one Please see my screen captures to see if this can hel pyou shed any light on the matter.
many thanks,
Neil

Similar Messages

  • My avi video files are no longer supported in PRE9? Help!

    I created a movie in premiere elements 9  several months ago.  My video was imported from avi files on my computer.  The avi files were originally downloaded from my camera.  Everything was fine and I even burned a near finished copy of my project on a DVD.  Now, several months later, I open up the project to put my final touches on it and notice that all the avi video files are red in the timeline.  On the organizer tab for my project under media type, it says, "offline".  So, I clicked on the avi file and it asks me to find it.  I find it (the files have not moved) and click on it and I get this error, "Error Message. This type of file is not supported, or the required codec is not installed."  This is very strange.  Do you have any ideas? My operating system is Windows 7.

    I kind of suspected MJPEG (just a hunch, as two other CODEC's, commonly wrapped in an AVI, DivX and Xvid, seldom every play correctly to start with).
    Now, there are many "flavors" of MJPEG. It is an older CODEC (or really type of CODEC, as there are so many versions), that was ressurected for use in mostly (then) stills cameras, with video capabilities added. It is not a bad CODEC, but each camera mfgr. has tweaked it for their purposes. This can create issues. MJPEG is not the "universal," that say DV-AVI Type II is. Canon will have a version, Nikon another and Panasonic yet another. They all show as MJPEG, but will be a bit different. A similar analogy can be drawn with Camer RAW files - Canon's differ from Nikon's, which differ from Panasonic's, though they are all Camera RAW. Also, Nikon, for instance, is constantly changing what is in their NEF (Camera RAW) files, so that the newest will require the latest release of Adobe Camer RAW (ACR), to be processed in Photoshop. MJPEG is similar to that, with fewer variations - but still individual variations.
    Now, there could well be reasons that things have changed. The first one to strike me would be that you installed the software that came with that camera, and included its specific version of the MJPEG CODEC, then later removed say the camera's utility, taking that specific version of MJPEG away. You might well have others, but PrE is having a hard time matching them up.
    In that article I linked to on MJPEG, I mention two popular MJPEG CODEC's, Morgan and MainConcept. Both are rather generic MJPEG CODEC's, and when MJPEG resurfaced, they worked fine for most such files. However, as time has elapsed, and camera mfgrs. tweaked and tweaked, they are less likely to work 100%. Once, they were the "silver bullet" for MJPEG - but not so much any more.We began seeing more users, with either, or even both, still having issues with newer MJPEG CODEC's. As most camera mfgrs. ship a copy of their specific version, somewhere along with the camera, it became common practice to recommend installing that specific version from the specific camera's utility disc. Unfortunately, that was not always easy to do. Some included their version of MJPEG as a separate installation (best way, IMHO), but many incorporated it into the camera's driver installation (still good), and then there are those instances, where the specific version of the MJPEG CODEC is installed along with other utilities on the disc, such as maybe a little editing program, or a file cataloging utility. Scant mention is ever made of the specific MJPEG CODEC, and how it is installed on one's system. The latter method seems to be the most common now. I have the full utilities, including the camera's own editing programs, installed for my Canon, my Nikon and my wife's Panasonic. That means that I have at least five (think that the total count is eight on my workstation) MJPEG CODEC's: one for Canon, one for Nikon, one for Panny, one Morgan and one MainConcept.
    What camera produced those MJPEG AVI files?
    Do you have that camera's editing and cataloging utility installed?
    Do you have the utility disc for that camera?
    Have you removed any such editing, or cataloging utility, between the time that the files worked, and when they did not?
    I do not believe that any version of PrE actually installs any version of MJPEG (could be wrong here), though they work with, and include various other MainConcept (mostly MPEG) CODEC's. That means that one will need to install an MJPEG CODEC, and the one specific to that camera, might be required.
    You obviously do have an MJPEG CODEC (or more), installed in your OS. As there is a vast difference between playback of an AV file, and editing that same file, it could be that PrE is just not able to use the installed version, with those files. As it once was able to edit them, I am guessing that something has changed, and it could be as simple as cleaning out one of the supplied utilities for the camera, that also removed its specific version of the MJPEG CODEC.
    As PrE does not install the specific version of the MJPEG CODEC, many recommend not trying to edit such material. I am not of that mindset, but do allow that one might have to do some extra work (and work that is NEVER outlined in the camera mfgr's literature - unfortunately), to get things to work. I had to install a bunch of programs, that I will never directly use, just to be able to edit the MJPEG AVI's from my family's cameras, in both PrE and PrPro. I hate having to do that, as it fills up my HDD with stuff, that will otherwise never be used - but I need the specific CODEC, and it's only available to be installed WITH other software - all too common nowadays, and a mistake on the part of the camera mfgrs. IMO.
    Good luck, and I hope that with the specific MJPEG CODEC, you will be back up and editing your footage, as you were once able to do.
    Hunt
    PS - sorry for writing an entire encyclopedia there, but MJPEG is not as simple as it could be.

  • After upgrading recently I got this message: "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." The music/video files are still on my MacBook Pro.  Is it because I'm still on 10.5.8?  How do I fix this?

    For your reference I’m using a MacBook Pro running 10.5.8.  Several weeks ago on a Monday I received an upgrade for iTunes. When Tuesday arrived I attempted to log in so that I could download the latest freebie song(s).  I was met w/this message: “The file ‘iTunes Library.itl’ cannot be read because it was created by a newer version of iTunes.”
    The music/video files are still on my Mac (I’ve verified that via Searchlight), but I’m unable to open the program.  Since I know that 10.5.8 is rapidly becoming prehistoric, could it be that the newest iTunes isn’t compatible w/this particular OS?  I’d like to switch up, but understand that the newest OS won’t work on a Mac of this vintage (6 years old).  In addition, my Adobe products (all CS2) won’t work w/anything newer than 10.5.8, so I’m reluctant to go to a newer OS (I just can’t afford the Adobe upgrade $$$ @ this point). 
    Is there any way to get a download of an “old” iTunes version?  If there were, I’d simply refuse any future upgrades until my personal economy allows me to stop working as if it were 2006.  Please advise, somebody!

    I don't know how you received an upgrade for iTunes.  You make it sound like it was sent to you.  At most your computer will tell you of a new version and you tell it to download it and install it.  However, a computer will not do this for a version which is incompatible.  iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer.  So this part isn't making a lot of sense.
    Two ways to get the 'newer version' message.  One is to open your library on a computer running a newer version, and then try to open it with an older version.  Usually happens when the library is on an external and used with multiple computers.  The second way is if you have multiple versions of itunes installed on your computer.
    The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while. 
    iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

  • Video files are playing audio without video (just a black screen)

    Video files are playing audio without video. It just shows a blank screen. These same videos work just fine in Chrome, thogh.

    Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Using Sothink video downloader, normally video files are save in FLV extension. Now for whatever reason suddenly my video files are save in .ebm extension. "Save file Type As" is peg only on .EBM extension

    Using Sothink video downloader, normally by default my video files are save in FLV extension. Now for whatever reason suddenly my video files are save in .ebm extension & I can't open my video file. "Save file Type As" -to select file extension does not seem to work -

    It's a WEBM video file. My solution was to rename the file to have .webm extension, and play it with the latest VLC Player (2.1, but I think any from 1.1 and upper will solve it too). Just associate .ebm with VLC didn't work. I had to rename the files so VLC knew exactly what that thing was.
    By the way, it worked the same way with a .eam file (!), I just renamed the extension to .webm.

  • Transfer video files from a DVD to Final Cut

    Hi- I have a couple of personal DVD's that has content I want to capture and edit into a timeline. I would like to capture only portions of each.
    Can anyone suggest best method of doing so?
    Also, can video files from a DVD playing from a computer be captured in the same computer?
    Thankyousomuch, J

    Here's a tutorial on using MPEG Streamclip: http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0
    -DH

  • What video files are supported by iMovie 10.0.6?  I have to somehow convert .rcproject files to something that iMovie will accept but I don't know what kind of format to change to.

    What video files are supported by iMovie 10.0.6?  What is the best way to allow iMovie 10.0.6 accept my .rcproject movies?

    Hey Sioux Falls,
    If you are looking for information on converting or updating older iMovie projects to iMovie 10, you may find the following article helpful:
    Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
    Note: To clarify, a .rcproject file generally only contains links and references to movie clips and effects that would be part of an iMovie project; it usually does not contain any actual video.
    Cheers,
    - Brenden

  • If my imported video files are 720 by 480 will my movie have to be small sized?

    I'm editing DV video files that, when I look at the specs on the file, says that the dimensions are 720 x 480. Common sense tells me that I shouldn't necessarily have to end up with a DVD that only covers about 1/3rd of my final viewing screen, but perhaps common sense has little to do with it. Much like the lack of it in the US Congress. However, that's what I'm ending up with right now. Is that just the way it is, or are there settings that I can make when importing or exporting that will allow me to fill up my Windows media screen a bit more with the final movie?
    I'm using CS5, intel core 2 quad CPU Q6600 2.40GHz 64bit system with 3gb of RAM.

    > fill up my Windows media screen
    I don't do such, but I think there is an option in media player to expand to full screen instead of the actual resolution... which, of course, means the video will not look as good since it will be somewhat blurry

  • Help! Trying to get a Video File off a DVD so I can use it in Final Cut Pro

    Okay. I'm trying to cut together a project and I need the video and audio off a short DVD. The DVD is under 5 minutes in length and is not copy right protected. For the life of me I cannot understand how to convert the files off the DVD to something I can work with. When I open the DVD I have 2 files: 1) AUDIO_TS and 2) VIDEO_TS. I would like to convert these to something FCP can understand (AVI, MPEG...anything). I have searched and searched the message boards and have found no useful information. I have a feeling it's something to do with Disk Utility but have found no clear instructions. Half the sites want you to buy their software. Surely there is some way to do this without buying additional software. Any help would be greatly apppreciated.

    There are four ways that I know of:
    1) Play the DVD and have the player's analog outputs connected to your DV VCR or camcorder, which then acts as a convertor to bring it into FCP
    2) MPEG StreamClip - FREE, rips the video and audio from the VIDEO_TS folder
    3) DVDxDV - $20 or so, does the same thing as MPEG-Streamclip only a little easier, IMO
    4) Cinematize - $70, same thing, more options

  • What setting do I use to make a self contained video file, not a DVD?

    I'm trying to use compressor to create video files to use on a friends Windows PC computer to be displayed from there, but I'm not sure what settings to use. I keep trying different things but I can't seem to get the audio to work. I read another response that the video and audio are saved separately but is there any way of merging them into a "self contained" video file?

    SD? HD? Do you need uncompressed (full res)? Can his computer play Quicktime movies? Can his computer play H.264? What format did you shoot, capture, and edit in? What program will the PC use as a player?
    The reason there are so many options as presets is because there is no best option. There are many needs for compression. Give more details about your workflow and output needs.

  • FCPX DVD export to Compressor: error burning disc; video file incompatible for DVD creation

    I've been working on a project for months now (feature film) in Final Cut Pro X. Therefor I have done about 20 exports already from within FCPX to Compressor for DVD. Did the same process last night as always.
    From within project timeline I go to SHARE -> DVD -> setup a basic menu then select USING COMPRESSOR
    Compressor opens. I click submit and after the progress indicator fills up way too fast, I get this error:
    "there was an error burning your disc the video file is incompatible for DVD creation"
    DVD spits out and that's it. Compressor and FCPX are both still running and haven't crashed but I'm confused. I have burned since the recent 10.0.3 upgrades (and whichever upgrade just came out for Compressor as well) so I can't imagine it's the upgrade.
    Any ideas?
    I tried making a duplicate of the project and renaming and exporting and had the same results.
    At this moment I am trying to export to DVD directly from FCPX with default settings and it has bee "processing" with no movemtn on the progress bar for an hour (it's a 2 hour video so this may not be abnormal).

  • Merge/combine video files. help

    I have quite a few files that I would like to merge into one big file. I already downloaded Prism Video Converter to convert the files, but now I'm not sure how to combine them into one. On the main download page for Prism Video Converter is says that you will be able to combine many files into one. Well I've looked through a lot and really can't figure out where/how to do this. The provider of Prism isn't even giving many any answers and won't unless I pay; but the catch is it didn't say I'd have to pay to combine files. What can I do?
    Is there a better program to use? I am not really concerned with a cost, free would be nice, but it isn't necessary. I just want to be sure my quality stays in good shape.
    Thanks.

    I know QT player will play AVI when Perian codecs are installed. I also know my ancient version of QT Pro will edit .mov. I can't guarantee anything but I think getting Quicktime Pro might let you do what you want to do. I don't have any version of QT Pro more recent than about 1997.
    Edit:
    QT Sync is a freeware utility that has a combine movies tool. I haven't used it so I don't know how successful it is. You might give it a try (and report back here ).
    AVIs might present problems. AVI is a container so it doesn't have a rigid set of formats for the enclosed tracks. AVI often has mp3 as the audio format which is not something used by Macs for audio with video. I can't speak from experience but it wouldn't surprise me if you couldn't find an editor to accept AVI with mp3 audio. One thing to check though is MPEGstreamclip. I notice my copy had an additional feature for letting you save AVIs from Quicktime Pro.
    If you are trying to play a group of videos then one solution might be not to edit them but to use a player that will string together a set of videos when playing. Maybe something like NicePlayer might help.

  • Mountain Lion combines video files from an external SDHC memory card.

    Hi there!
    I just installed Mountain Lion and was very surprised to discover when inserting a memory card from my digital camera (not direct camera to Mac but through the direct slot on the MBP) that all videos I took where combined in one single - huge - Quicktime file.
    Clicking on it gives me an "Open Clip" window where I can launch individual video snippets. However several of these Massive files don't even work... (Upon clicking it gives me a "Could not complete operation" covered by a forever-lasting loading icon... (which never loads).
    I'm wondering if it's a feature that can be switched off?
    I haven't experimented yet, but would hate that the Mac sees all videos as a combined file, and maybe confuse the digital camera writing mode when I put the card back in the camera.
    Any feedback is appreciated.
    Thanks,
    Calx

    Thanks David,
    You're right - it's MTS files.
    I had previously found the 'show package contents' right click but it doesn't seem to work consistently.
    i.e. On one 'source' it works, on another it loads a blank page. When I access the second source on an older Mac (non-mountain Lion) it reads about 30 MTS video files which all work properly.
    I really don't understand the logic in combining several hundred video files & create a composite huge file.
    Either way - thanks for your valuable suggestion!
    Best,
    CC

  • It thinks my video files are music

    I used my iPod with my laptop for the first time a few days ago, and for some reason it moved all of the video files on my iPod into the music section. I can only assume that's because I had a really old version of iTunes on that computer at the time. When I play one of the files on my iPod, it plays the audio and uses the first frame of video as the artwork. When I play one via my computer (but using the file on my iPod), it plays normally. Is there some way I can move them back to the movies section and/or make them play properly on my iPod? I could just delete them all and re-download them, but I wouldn't be able to get all of them back that way. I accidentally deleted the backup of a favorite video just before this happened. >.>;;
      Windows XP  

    I was browsing other topics while waiting for a response and read that there's a way to access all the files on an iPod through My Computer, which made me remember that I had hidden files set to be invisible. I switched them to be shown, and all the files were right there, with weird code names. I just copied all the video files into My Documents, sorted them, and put them back on.

  • Video files are slow to respond with "get info"

    When trying to change the file information with the Get Info, it takes 40/41 seconds for each file to open.
    If I change one file from movie to tv show and select next, it will also take 41 seconds to load the next file.
    I dont know if its the new itunes or my brand new computer.
    Has anyone had any experience with this?
    Thanks
    Craig

    Alas, with much perserverence, I found a solution. My new machine is a Dell E520 and had updates to download .Firstly a BIOS update and more importantly an Intel SATA Matrix Storage Manage Update. With both of these updates, my iTunes is now reading video files in a few seconds.
    The difference is mind blowing and certainly as it should be. In fact, it is better than it ever was (but then it should be with a new computer).
    Thanks to you that reported the SATA problem. It gave me another avenue to research and a final solution. Which just goes to show, (what someone said to me many years ago): "don't accept something that is just ok, make sure you love it and you will enjoy it so much more."
    Good Luck

Maybe you are looking for