Combining 10.3.9 combo update to Panther DVD

I've learned that in Windows XP, you can add SP2 to original Windows and make a new cd with SP2 included. Can we do this with Panther? I would like to combine 10.3.9 combo update to my panther DVD.
Thanks!

No. There is no equivalent for OS X. A Combo Updater provides all the updates released since the major upgrade through the current incremental version.

Similar Messages

  • In Software Update... "10.6.2 update combined"... the combo update?

    I had to reinstall Snow Leopard and lost my updates (I still have documents etc. thanks to TM) including printer drivers. I went to software update and there was:
    Epson Printer Drivers Update
    Mac OS X 10.6.2 Combined
    iLife Support
    Total of 603.9 MB
    Is the "combined" one just like the combo updater on Apple.com? (I understand combo is the same as combined)

    Thank you

  • Mac OS 10.4. 11 Combo update (PPC) bug?

    Installed the update above after software update check. On restart the Imac stops witth a black screen and the fan going at full speed. The "on" light is lit.
    I have done the following actions:
    1. started from the installer that came with the computer (Mac s 10.3)
    repaired permissions. repaired disk.
    2. Installed system 10.3 again.Works fine.
    trashed many files to make 18 GB free space on the hard disk.
    3. Upgraded to Tiger 10.4. Works fine.
    4. repaired permissons again.
    5 . Did another Software update download and install of the Combo update.
    6. Result: black screen, fan going at full, "on " light on.
    Any good advice ?

    Good advice?
    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    More information on using Software Updater here:
    http://support.apple.com/kb/HT1338
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Whats the difference between a combo update and using software update?

    I keep my Macbook up to date by checking regularly via software update, so far with no mishaps, but I have seen people on these forums mentioning that a it is better to download the combo updates direct from Apples website. Is this true, if so why, and what is the difference? I am thinking of installing Leopard which would then probably need updating to the current version, so what is the correct way of doing this?

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    More information on using Software Updater here:
    http://support.apple.com/kb/HT1338
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Error message while trying to run combo update

    I get the following error message when trying to run the combo update.
    "You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
    I tried with both 10.5.7 and 10.5.8 and I get the same message.
    Any suggestions?

    1. Be sure you have downloaded the 10.5.8 Combo Installer.
    2. Verify that you have 10.5.x installed by opening About this Mac from the Apple menu. The installed version should be displayed.
    3. Do the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • MacOSX 10.4.11 Combo Update (PPC):IMPOSSIBLE; I NEED "TIPS" FOR MY SUICIDE!

    For the last 4 weeks, day after day, i try to update, but it s totaly impossible!
    I have set my IMac 10.4.6 PPC perfectly (energie saving off, automatic update download on, all keys acces open, etc., ...), but even if its seems to work, nothing appenend!!!
    *(?&%&#$?#%*&&?#?#@$!!!
    What's that new Apple mixed-up again...?
    Also, my sofware update history only shows mars 2008 an before history update list !
    Save a life! Help me please.
    PS IF THERE'S ANY ONE WHO CAN GIVE ME TIPS AND RECEPICES FOR MY SICK OF MAC SUICIDE, PLEASE WRITE ME (before october 31 2009 Holloween day...After, it's gone be to late and useless!)
    Sickofmac (french Montreal)

    Just to add to BDAqua's excellent advice:
    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Can't start OS after 10.4.11 combo update (PPC)

    During 10.4.11 combo update it stopped with an error. It didn't look to be a problem since my system was running and I just close the update and continued using my mac.
    However, when I decided to restart my system, it won't stat just showing the gray display with the Apple logo and the spinning wheel.
    Safe boot didn't work. It shutdowns.
    /sbin/fsck -fy doesn't complete successfully.
    I'm traveling overseas and I don't have the system DVD with me nor my external hard drive with my backup.
    What are my options if I have any.

    General advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • 10.4 to 10.4.11 Combo Update (PPC) Issues - Will Not Sleep, Etc.

    I've been running Panther 10.3.9 successfully for a long time. There are a few programs I'd like to use that require Tiger and I realized that Tiger retail disks were getting hard to come by and expensive, so I decided to buy one when I found it for a decent price.
    I installed 10.4 (running repair disk and repair permissions prior) and then ran all the possible updates from Software Update. I did not select them all at once, most of them one at a time, while repairing permissions after each of them. Shortly after, things were not right.
    The first thing I noticed was that I could not put the computer to sleep with either the Apple > Sleep or through the settings in Energy Saver. Expose was flakey also, it seemed to work intermittently. The eject button on the keyboard also worked intermittently. Then, with Activity monitor I would see the following items not responding: loginwindow, System Preferences and Disk Utility (not necssarily at the same time, but at one time or another.) I suppose there may have been others issues, but these are just some of the things that I noticed.
    Startups, restarts and shutdowns took a long time. However, the progress bar on startups after the grey screen visually moved exceptionally fast and seemed odd.
    These issues also occurred in Safe Mode.
    An archive and install back to 10.4 produces a perfect running system, none of these problems occur.
    Since my initial update attempt, I've tried to update with the manually downloaded 10.4.11 Combo Update (PPC) with the exact same results (no sleep, expose issues, not responding issues, slow startups, restarts and shutdowns, etc.)
    I've archived and installed and updated four times - only keyboard, mouse, ethernet cable and apple speakers were attached. I'm currently sticking with 10.4 until I can find something I can do to troubleshoot this issue which may allow me to get a problem free update to 10.4.11.
    Note that my computer does lose the date and time settings when powered off and today I ordered a new PRAM battery. Could a dead battery be contributing to my issue, even though 10.4 is fine?
    Any suggestions would be appreciated!
    Julie

    ...only real low level kexts like old drivers for Universal Power Supplies & such, or real Haxies that dig into & change the OS somewhere.
    So, if old drivers and haxies might exist, how do I go about finding them? The only program that I have that I think may be considered a haxie is DockExtender 3.1.3, http://www.codetek.com/dockextender/ (stills seems to work.) It was in my startup items when I initially performed the combo update. Since then, only iCal related items are in my startup items. Subsequent update attempts have been ran when DockExtender was not active. Also, is it note worthy that I have a non-system icon for my hard drive?
    My feeling so far is that it's the HD or RAM, Tiger is twice as hard on & demanding of both.
    My hard drive is a Seagate 200 GB (utilizes only 128 GB) Ultra ATA/100 7200 RPM 8 MB Cache installed around March 2006. It still has a 2 year warranty. Are you speculating that it just may not be suited for Tiger?
    My memory consists of three strips of Corsair VS256MB133 G that I installed in February 2008 - these came as a warranty replacements due to a bad strip of another part number that they did not stock any more.
    I don't think it's any of the APPs you aren't running.
    In terms of my applications, so far I've updated Firefox (uninstalled some incompatible add-ons and themes.) Identified Font Doctor 5.1.2.9 has likely not being compatible, because it quits when selecting a folder to move troubled fonts to when diagnosing. I questioned Extensis Suitcase 10.2.2, but found out that if I trashed the Library/Caches/com.apple.ATS that the font activation errors were resolved. Safari has crashed on me a few times, but it is still version 2.0. It also crashed in 10.3.9, forcing me to use other browsers. Can I update Safari now? Software Update does not show Safari and I don't know if the combo update is the only was to update it. I'm still investigating other applications compatibility, but the true test won't happen until I run the combo update and am able to run my applications on 10.4.11.
    If you had a Firewire Drive to Install to & try, that would be great.
    I do have an external firewire drive, but it contains a bootable backup of my 10.3.9 system right now. I'd hate to tamper with it at this time, due to my current situation. I can check on borrowing one if necessary. Would this prove out the question regarding the hard drive and since it would be a clean install = no possible haxies or old drivers lingering around. I also have my old internal hard drive that I could use but, this would be the original from this mac and although it worked fine when I removed it, maybe it would not work well with Tiger.
    Thanks,
    Julie

  • MAC OS 10.5.8 Combo update installation probs

    Hi!!
    I'm trying to update my mac with the new software update, but unfortunately, it can't seem to finish installing. im stuck in the "configuring installation" part. i left the computer for two hours hoping that it would continue with the installation, but it didn't.
    what seemed to be problem? do i have to redownload the update?

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • 10.5.5 Combo Update - .dmg fails to mount

    Downloaded the 10.5.5 Combo Update. The .dmg failed to mount. Error message says "not recognized."

    Same Boat. I downloaded the Combo Update several times using different browsers such as Safari, Firefox, and even Opera. Same Error each time about "Invalid Checksum". I also downloaded and installed the new iPhone Update and now my iPhone battery lasts half as long. It seems to me that since leopard came out every time there is a new update it has not been tested properly and at least half of the people installing the update have problems. I also do regular maintenance on my computer using software programs such as Disk Warrior, Tech Tool Pro, Applejack, Onyx, and Socks. These bad updates are really starting to get old. I wish that apple would get these issues fixed PRIOR to releasing the updates...
    I could be mistaken, but I don't recall as many errors and people having problems when there were updates to Tiger, Panther, Jaguar, or Puma. I suppose the fact that the OS that Apple is releasing next "Snow Leopard" is focused on Stability Issues and not new features tells the whole story. We'll all be shelling out another 129.99 for a new OS that is really just what this OS should have been in the first place; which means that, in the end, we're all really paying "$260.00" for a stable version of Leopard... I switched to Mac in 1993 to avoid these types of Windows-Like Issues. When Apple re-emerged after almost failing it appeared to me that they were focused on quality, but now I'm starting to wonder. It seems to me that the quality of Mac/Apple Products (including both Hardware & The OS) has really gone downhill...
    David

  • Mountain lion combo updater

    I can't find a download link for the 10.8 combo updater.  Does it usually take a while after release for that to appear?

    I did already purchase it.  But I was remembering the method I used when I updated to Lion, which was probably a few weeks after the original release, by which time there was already a 10.7.1 update.  I purchased it, but canceled the update, and downloaded the combo updater to avoid some reported problems. 
    Thanks for reminding me there's no "combo" until there's something to combine!

  • 10.4.11 Combo Updater (Intel) just hangs, doesn't continue...

    I have 10.4.11 installed already, but have been having major problems with crashing applications -- Software Updater and all of the browsers -- so on the advice of someone on another thread, I downloaded the combo updater and was going to install that. The application opens just fine, but when I click "continue," it doesn't do anything... it just sits there...
    What should I do? I'm so frustrated because when I try to solve any one problem, it just seems to uncover another problem, and I don't know what else to try!
    Thanks in advance to any kind hearted souls with advice!

    Welcome To  Discussions zoe!
    THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
    1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
    2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3.Click the First Aid tab.
    4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5.Select your Mac OS X volume, if necessary.
    6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
    7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
    8.When finished, select Quit Disk Utility from the Installer menu.
    9.Select Quit Installer from the Installer menu.
    10.In the resulting pop-up window, choose restart.
    11.After the computer has restarted, you can eject the CD.
    ali b

  • 10.4.9 Combo Update (Intel) Problem !!!!

    Hello people
    i have a 8 core mac pro and it came with pre installed 10.4.9 .
    I want to apply a 10.4.9 combo update as for Protools and the other softwares are requering for this clean update.
    I downloaded combo intel update , but when i try to make it , it keeps saying ;
    ''you cannot install mac osx update combine (intel) on this volume . This volume does not meet the requirements for this update''
    I really dont understand it . Any one knows the solution ???
    Thanks in advance .

    You can't install the 10.4.9 combo update because you
    are already at 10.4.9
    Normally, you should be able to run a combo updater with the same OS version number as the currently installed OS version as many times as you wish (assuming it is for the same type of hardware, PPC or Intel, of course).
    The exception is when the combo updater is older than the actual version of the OS installed on the Mac. This can happen because Apple occasionally releases new models that require new extensions to function. The version of the OS supplied with those models is a new build including those extensions. The previously released updater does not include those new extensions & thus cannot install that build of the OS, so you get the error message.

  • Cant apply 10.7.5 combo update?

    I have a 2006 MacPro that I installed the 10.7.5 Update through the normal software update process that resulted in my system acting up and would like to install the 10.7.5 combo update which many say fixes these issues but when using the installer it says "Mac OS X Update Combined can't be installe don this disk.  This volume does not meet the requirements foro this update."
    Any suggestions?

    I have the same problem.
    I update through normal mechanism from 10.7.3 to 10.7.5.  But the computer is still finicky so I download the combo update for 10.7.5 and tried to install it.  It gives me the message that my disk does not meet the requirements. (I took the combo update here :
    OS X Lion Update 10.7.5 (Client Combo)).  Repairing the volume, the disk, clearing caches, updating the system, trying in safe boot.  Nothing worked.
    I also tried to the terminal  to no avail.  Notice in the terminal output the weird "Status disabled" associated to my disk. 
    sudo installer -pkg MacOSXUpdCombo10.7.5.pkg -target / -verbose -volinfo
    Volume information:
    Status          : *** Unknown Status(5) ***
    Volume          : Mac OS X 10.7.5 Update Combo
    Size            : 2.34 GB
    MountPoint      : /Volumes/Mac OS X 10.7.5 Update Combo
    Device Node     : disk1s3
    FileSystem Kind : HFS+
    Message         : The contents of this disk can’t be changed.
    Status          : Disabled
    Volume          : blablabla
    Size            : 499.25 GB
    MountPoint      : /
    Device Node     : disk0s2
    FileSystem Kind : Journaled HFS+
    Message         : This volume does not meet the requirements for this update.
    My system does hit the requirements ;
    Model Name:     MacBook
    Model Identifier:       MacBook5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed:        2,4 GHz
    Number of Processors:   1
    Total Number of Cores:  2      
    L2 Cache:       3 MB
    Memory: 4 GB   
    Bus Speed:      1,07 GHz
    Boot ROM Version:       MB51.007D.B03
    SMC Version (system):   1.32f8
    And the disk also
    diskutil info /
    Device Identifier:        disk0s2
       Device Node:              /dev/disk0s2
       Part of Whole:            disk0
       Device / Media Name:      blablabla
       Volume Name:              blablabla
       Escaped with Unicode:     blablabla
       Mounted:                  Yes
       Mount Point:              /
       Escaped with Unicode:     /
       File System Personality:  Journaled HFS+
       Type (Bundle):            hfs
       Name (User Visible):      Mac OS Extended (Journaled)
       Journal:                  Journal size 40960 KB at offset 0xe8e000
       Owners:                   Enabled
       Partition Type:           Apple_HFS
       OS Can Be Installed:      Yes
       Media Type:               Generic
       Protocol:                 SATA
       SMART Status:             Verified
       Volume UUID:              blablabla
       Total Size:               499.2 GB (499248103424 Bytes) (exactly 975093952 512-Byte-Blocks)
       Volume Free Space:        132.7 GB (132694798336 Bytes) (exactly 259169528 512-Byte-Blocks)
       Device Block Size:        512 Bytes
       Read-Only Media:          No
       Read-Only Volume:         No
       Ejectable:                No
       Whole:                    No
       Internal:                 Yes
       Solid State:              No
    Model Name: MacBookNAny help would greatly appreciated.

  • 10.6.7 Combo Update refuses to install on new MBP '11

    I have a 2-weeks old MBP 17'', just downloaded the 10.6.7 combo updater which tells me that
    "Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update"
    When selecting "Macintosh HD".
    Any suggestions?
    Regards
    Markus

    I do have a similar issue with a MB. There was a big problem with the last update (10.6.6). I had to wipe the disk and start from scratch and reinstall 10.6. The subsequent update to 10.6.6 worked alright after that.
    Now the same thing with 10.6.7. It recognizes the new version and downloads it. The installation starts as usual, only to get stuck minutes before one would have expected it to finish successfully.
    When I start all over I seem to be stuck with the first download. How can I persuade the MB to start a new download?
    (By the way: My iMac accepted the update with now problems whatsoever)

Maybe you are looking for