Combining 24p from V1U with 24p from VX100

As I understand it, 24p is not 24p is not 24p, and there are some issues that might arise from mixing 24p from two different brands. Is this the case? If so, what is needed to be able to capture and use the footage from a Sony 24p and a Panasonic 24P. A plug in? A setting? Hardware?

It there/was there a problem in the past with Final Cut Pro capturing 24 P from the V1U? We had heard there was. but we are not clear what that problem may have been or how it manifested itself?

Similar Messages

How to combine data from different input forms outside a nested iView

Hi,
i try to combine data from different input forms in a single one.
Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
Is there any solution?
Thanx
Mathias

Hi Scott,
i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
greets
mathias

OBIEE 11g - Combine data from two Oracle tables

Good day!
I tried to combine data from two Oracle tables as fact data, but it doesn't work.
My steps: I created SCOTT.EMP2 table from SCOTT.EMP table, update EMPNO and ENAME values of EMP2 table to distinguish data of my tables. Then I imported physical tables DEPT, EMP and EMP2 to BIEE 11g, created joins DEPT-EMP and DEPT-EMP2 in physical diagram. Then I dragged DEPT and EMP tables to BMM, and EMP2 table to EMP as second LTS. In Content tab for EMP and EMP2 I checked "This source should be combined with other sources at this level" checkboxes. Then I renamed logical tables EMP and DEPT to Employees and Departments and dragged them to Presentation area. In Answers I created Analysis with columns DNAME and ENAME.
The problem is that data on results tab is only from one physical table EMP or EMP2 (depending on the order of sources EMP and EMP2 of LT Employees) and not from both.
Can anybody help? Am I missed something?
Al.

Hi Al,
I think you have to define the content of the LTS.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_BusModSetup16.html
You have to specify the content of the different fragments.
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_SetUpAggNav3.html#wp1005333
Maybe you have to add an additional column 'Source' ('EMP1', 'EMP2')
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Acrobat 9.4.4 patch stops combine files from MS Word

Yesterday morning, I was able to use the right click and "Combine supported files in Acrobat" repeatedly and just fine.
Then the updates came. Unfortunately we installed them on most of the computers in our office (except for one that was off), and so now every patched computer in my office is not able to use the 'combine supported files in Acrobat' without locking up on the first file. One of the computers gave a DDE error box, but I wasn't there to see it.
The computer that didn't receive the patch continues to work just fine.
I called tech support and he said it must have been a setting on my computer, because that's what his cue card says. This problem is across multiple platforms, (Vista AND 7 Pro) and with Word 2007, and Word 2010. Everyone was working in the morning, and was broke after the patches. Please reply to this so that Adobe will wake up and realize there were issues with the patch, and not ask me to pay for the tech support fee.
Thanks,
Michael Roark

I've got a javascript that split up pdfs from a text file that worked sweetly on v9.4 but now refuses to open the pdf and throws an error
NotAllowedError: Security settings prevent access to this property or method.
App.openDoc:64:App Combine Pages from Text file:Exec

Combining data from different applications

Dear all,
I am using BPC 5.1
I have a "Sales" application with dimensions "account", "entity", "time", "rptcurrency", "category", "product". And another "HR" application with the same dimensions as "Sales" except for "product".
How do i create a report that combines data from both applications, assuming my dynamic template is opened with a current view of "Sales".
Cheers

Hi Lip,
I just tried what you need and it worked fine.
In your case, build a report say evdre, for HR application, and for the same sheet, change the current view to Sales and build one more evdre. You get a prompt saying one evdre may break while expanding other.Disable this prompt, belive me , it will work fine.
The page key of HR application will have all dimensions refering to cvv of HR application, change it to refer to cvv of sales application( for only the dimensions both applications have in common).
Now the report is dynamic with current view of Sales application.
Hope this helps,
Kranthi
It took to long for me to reply:)
Edited by: kranthi kumar on Sep 30, 2008 11:53 AM

Combining PDFs from MACs and PCs

Is there a way to effortless combine fairly large pdfs created on MACs and on PCs (usually containing images and tables)? We have had terrible problems with this, including image and caption distortion, etc. Sometimes, we are unable to create pdfs on a PC if we are sent a Word document created on a MAC.
Any advise could be greatly appreciated.
Thanks.
Steve

If I print to PDF, nothing at all happens.
If I try to do a Save As, I get the following message:
“The export failed. The document could not be prepared for exporting.”
If I right click on the file name and use Convert to Adobe PDF, it will start the process and then stop and return to the Word document.
Re: Combining PDFs from MACs and PCs
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4710976#4710976

Linking/combining data from old sensors

Is there any way to combine all the data captured from old sensors and add that to the current sensor data. My first sensor went bad. I would like to put that old data back on my iPod and combine that on iTunes with the current sensor...and then delete/remove the old/bad sensor from iTunes. The Nike website combines all the data as if there was only one sensor used, but the iPod and iTunes do not. Is there any way to do put that data from the old sensor back on the iPod and combine all the data in iTunes?
Thanks.

I figured out how to do this--how to combine the old data with the new data and delete the old sensors from iTunes.
I downloaded an application called TinkerTool at http://www.bresink.com/osx/TinkerTool.html
This application enables you to view the hidden files and folders (on your Nano). With this program I was able to find where the Nike+ data is stored on the Nano. The data for each sensor (including the workout data) is stored in a folder named "Empeds" at:
Ipod_Control/Device/Trainer/Workouts/Empeds
Before you attempt any of this, I would recommend you make a copy of this folder in case something goes wrong, you will have a backup (just in case).
Here's what I did...
Within the Empeds folder you should see subfolders (or many subfolders if you had many sensors) with a long string of numbers and letters (e.g. 4H713B45VSX). Each of these folders represent a different sensor. Inside that folder (with the long string of numbers and letters), you will see several xml files with the workout date used as the name of the title of the file. I simply combined all these xml files and pasted them inside the folder with the current sensor data. The oldest sensor was listed first alphabetically...and the newest sensor was listed last.) Then I deleted the other folders with the (with the long string of numbers and letters).
Once I figured out how to do this, it took less than 5 minutes.
Please let me know if you have any questions.
Thanks.

Combine Info from two itab

Hi,
        WHAT IS THE WAY U FOLLOW TO COMBINE INFORMATION FROM TWO-ABAP DICTIONARY TABLE INTO A SINGLE INTERNAL TABLE (EXCEPT JOINING)? SPECIFY THE METHOD.WHAT R THE NECESSARY PRECAUTIONS NEEDS TO BE TAKEN WHILE USING THAT STATEMENT?

select *
from DB1
into IT1
where<condition>.
if not it1[] is in initial.
sort it1 by <key>.
delete adjacent duplicates from IT1 comparing <key>.
select * from DB2
into IT2
for all entries in IT1
where <key> = IT1-<key>.
endif.
loop at IT2 assigning <fs2>.
    read table IT1 assigning <fs1> with key <key> = <fs2>-key binary search.
   if sy-subrc = 0.
      copy fields into workk area w3 from <fs1 & <fs2>.
     append wa3 to IT3.
     clear wa3.
   endif.
endloop.

How do you combine pages from separate PDFs?

How do you combine pages from separate PDF files into one document?

I use Adobe Acrobat for this.

How disable PDFEdit combines text from multiple Tj operators

HI
In http://help.adobe.com/livedocs/pdfl_sdk/9/PDFL_SDK9_HTMLHelp/API_References/Acrobat_API_Re ference/PDFEdit_Layer/PDEText.html mention that "PDFEdit combines text from multiple Tj operators into a single text run, when possible "
how I can disable this feature
I want disable this feature because I write a program that process (encrypt) and copy every element recursively , I used chain encryption algorithm that mean if one bit change or shift all result will be wrong
when I encrypt, for example count 323 run in one textelement but after encryption and when I want decrypt in same textelement I just get 322 run, I think this problem caused by PDFEdit combines text.
thanks for your help

Pdfedit can and often will write a completely different set of operators. It converts the operators to an object representation, then wites opererators for the objects. you cannot stop this, it is what it is supposed to do.

How do i create/combine my mac id with my iPhone id?

i wanted to download an app form app store and was asked for my id.. apperntly my iPhone id is limited to my country's app store and my email is in use for that id... how do i create/combine my mac id with my iPhone id so i can download apps from appstore?

The Apple ID for the iTunes stores and for the Mac App Store are the same account. You can only buy from the stores in the countries in which you have the qualifications. You must have a bank card in that country and the bank card must have a valid billing address in that country. Creating more than one Apple ID is a bad idea and will not help you get around the requirements.

Combining 2 seperate recordsets with related records

What is the easiest to combine 2 seperate recordsets with related records?
The following example has two different recordsets F1 and F2 but are joined with F0.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> with t0 as
2 (
3     select 1 as id, 'Example 1' as f0 from dual union all
4     select 2 as id, 'Example 2' as f0 from dual
5 ),
6 t1 as
7 (
8     select 1 as id, 'a' as f1 from dual union all
9     select 1 as id, 'b' as f1 from dual union all
10     select 2 as id, 'aa' as f1 from dual union all
11     select 2 as id, 'bb' as f1 from dual union all
12     select 2 as id, 'cc' as f1 from dual union all
13     select 2 as id, 'dd' as f1 from dual
14 ),
15 t2 as
16 (
17     select 1 as id, 'x' as f2 from dual union all
18     select 1 as id, 'y' as f2 from dual union all
19     select 1 as id, 'z' as f2 from dual union all
20     select 2 as id, 'ww' as f2 from dual
21 )
22 select f0,f1,f2
23 from t0, t1, t2
24 where t0.id = t1.id
25 and t0.id = t2.id;
F0        F1 F2
Example 1 a x
Example 1 b x
Example 1 a y
Example 1 b y
Example 1 a z
Example 1 b z
Example 2 aa ww
Example 2 bb ww
Example 2 cc ww
Example 2 dd ww
10 rows selected.desired output:
F0        F1 F2
Example 1 a x
Example 1 b y
Example 1    z
Example 2 aa ww
Example 2 bb
Example 2 cc
Example 2 dd

I got it! One more question though, can this be done in a easier way? Like using xmlsequence, analytical functions or other tricks that I don't know about.
SQL> with t0 as
2 (
3     select 1 as id, 'Example 1' as f0 from dual union all
4     select 2 as id, 'Example 2' as f0 from dual
5 ),
6 t1 as
7 (
8     select 1 as id, 'a' as f1 from dual union all
9     select 1 as id, 'b' as f1 from dual union all
10     select 2 as id, 'aa' as f1 from dual union all
11     select 2 as id, 'bb' as f1 from dual union all
12     select 2 as id, 'cc' as f1 from dual union all
13     select 2 as id, 'dd' as f1 from dual
14 ),
15 t2 as
16 (
17     select 1 as id, 'x' as f2 from dual union all
18     select 1 as id, 'y' as f2 from dual union all
19     select 1 as id, 'z' as f2 from dual union all
20     select 2 as id, 'ww' as f2 from dual
21 )
22 select f0,f1,f2
23 from
24 (
25      select f0, rn,
26            max(case when f1 is null then null else f1 end) f1,
27            max(case when f2 is null then null else f2 end) f2
28      from
29      (
30          (
31              select f0, f1, null f2, row_number() over (partition by f0 order by null) rn
32              from t0, t1
33              where t0.id = t1.id
34          )
35          union all
36          (
37              select f0, null f1, f2, row_number() over (partition by f0 order by null) rn
38              from t0, t2
39              where t0.id = t2.id
40          )
41      )
42      group by f0, rn
43 );
F0        F1 F2
Example 1 a x
Example 1 b y
Example 1    z
Example 2 aa ww
Example 2 bb
Example 2 cc
Example 2 dd
7 rows selected.

How to combine a content search with an attribute search with the API

Hi
I have been working with searches in Content Services using the API and I have successfully set up the search over the contents of a document and inside of the Category attributes of the document.
My problem comes when I try to combine this 2 kinds of search, that is when I want to find all the documents that cointain the text "test" and at the same time contain other text into their category attributes.
What I do is to build 2 SearchExpression's one for the content search and the other for the attributes search and then joining them in a third SearchExpression object using the FdkConstants.OPERATOR_AND. When I search using only the first or the second SearchExpression everything works fine. But when I do the search using the third SearchExpression an ORACLE.FDK.ParameterError:ORACLE.FDK.InvalidSearchExpression
exception id raised.
The code I'm using is like this:
private SearchExpression getMainSE(String contentQuery, CategoryInfo catInfo)
     SearchExpression contentSE = null;
     SearchExpression catSE = null;
     SearchExpression mainSE = null;
     if(contentQuery != null)
          contentSE = this.setupSE4Contents(contentQuery);
     if(catInfo != null)
          catSE = this.setupSE4Category(catInfo);
     if(contentSE != null && catSE != null)
          mainSE = new SearchExpression();
          mainSE.setLeftOperand(FdkConstants.OPERATOR_AND);
          mainSE.setLeftOperand(catSE);
          mainSE.setRightOperand(contentSE);
     else
          mainSE = contentSE != null ? contentSE : catSE;
     return mainSE;
CategoryInfo is one class made by my own that contains the categoryId of the document and a List of the attributes where I want to search. mainSE is the SearchExpression that is returned.The portion of code that appears to be having problems is this:
if(contentSE != null && catSE != null)
     mainSE = new SearchExpression();
     mainSE.setLeftOperand(FdkConstants.OPERATOR_AND);
     mainSE.setLeftOperand(catSE);
     mainSE.setRightOperand(contentSE);
And finally I only execute the search using the mainSE returned by the function:
// Define search options
NamedValue[] nv = WsUtility.newNamedValueArray(new Object[][] {
     { Options.FOLDER_RESTRICTION,
          folder != null ? new Long(folder.getId()) : null },
     { Options.SEARCH_VERSION_HISTORY, Boolean.TRUE } });
     SearchExpression mainSE = this.getMainSE(contentQuery, catInfo);
     try
          // Search documents
          NamedValue[] result = sem.search(mainSE, nv, null);
          // etc....
Is this the correct way to combine a content search with an attribute search???
I know that this is possible since I have seen that it can be done in the Collaboration Suite UI.
I hope yoy can help me...
Thanks in advance

Not sure if this is a typo (while pasting code on the forum) or is the cause of the problem you describe.
Shouldn't mainSE.setLeftOperand(FdkConstants.AND) be replaced by mainSE.setOperator(FdkConstants.AND) ?
Ravikiran

Combine a Bar Graph with a Line Graph!

Is it possible to combine a Bar Graph with a Line Graph because occasionally we wish to use both bars and lines on the same plot.
If yes, could you please give us a sample rtf file?
Thanks,
-Ritu

Hi Tim,
To be more clear, I need to superimpose the two graphs.
For example,the first one shows the budget for each month along with the actual expenditures as a bar graph. The other shows the cumulative budget, forecast and costs for the entire project as a series of lines. The first graph uses the scale on the left side of the graph and the second graph uses the scale on the right side.
Thanks,
-Ritu

Is it possible to combine a address list with a Pages document and a data base in Numbers, the equivalent of "Mail Merge" using Microsoft?

Is it possible to combine an address list with a Pages 5.1 document and a data base in Numbers 3.1, the equivelent of Microsoft "Mail Merge"?

It is possible in Pages 09 and Numbers 09 but not in the versions you name.

"Combine" New Apple ID with old one?

As a fan of Apple and their products i'd thought, that i have to sign up on the Apple Support Communities, so yeah, i did it and .. "here i 'am". As i am German, i have to say sorry, if i use bad English. Complaints please to my former English teacher ^^
Just let me say at this moment "A Big Hello" to you!
My first discussion is thought to be a question: Can i "combine" my new Apple ID with my old one?
> Till recently, the Apple ID i used was the one of my dad (so his eMail-adress of course). Now i've created my own Apple ID with my own eMail-adress. It would be great, if i could "transfer" the purchases, i've done with the former Apple ID (my dad's one) to my Apple ID. So, i'd have a better survey over all my purchases too, because i don't have to think "What apps have i bought with the Apple ID of my dad, which one's with my own Apple ID" and so on..
Is there a chance to do this?
Oh, and while i talk about "combine": is is possible, to combine "Purchases" and "Purchases with iPhone" in iTunes? I mean, that ALL purchases (the ones i've done via iPhone too) are listed under "Purchases" and the "Purchases with iPhone" could be shown off?

Haha! Thanks.
Aw, really? I was actually thinking about your discussion question because I was wanting to merge my new iCloud account into my same old iTunes account so I wouldn't have to deal with two separate ones...
Excellent! That'd be very great! Let's hope that comes through. I'll be keeping my eye out for that one.
Haha! Is that true? I feel stupid because I speak English. Since I don't know any other languages fully... So I feel like anyone could understand me if I were in a different country without challenge. Which is good if I want to get my point across, but I just feel like it'd be nice to speak the natural language, ya know?

Combining 24p from V1U with 24p from VX100

Similar Messages

Maybe you are looking for