Combining Audio Devices: Input Channels don't work

Hello,
I combined 2 Audio Interfaces with 2 input channels and 2 output channels each with my default audio output using the Audio-MIDI-Setup.
Now i realized that one input channel per interface disappeared, but thats all good, because these channels were dead anyways.
But: When combining the devices to a new device the input channels just disappear.
The Audio-MIDI-Setup lists 6 output channels an 0 input channels for the new device.
When using the audio interfaces normally (without creating a new device) the input channels work perfectly, so there's no hardware error.
Screenshot: http://img185.imageshack.us/img185/9531/bild4c.jpg
I hope you can help me
Hendrik
Message was edited by: Hendrik1301
Screenshot added

Problem remains unsolved

Similar Messages

M30 - Front Mode and Audio/Video Control buttons don't work

Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
Thanks

Hi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye

P755 and Realtek HD Audio Manager sound effects don't work

Hi. I have a P755 and the Realtek HD Audio Manager sound effects don't work. Everything seems to be up to date, but the equalizer and environment features have never worked. I am using the Analog stereo out. The Speaker Configuration is Stereo. The only thing that seems to change the audio characteristics is switching from Headphone to Line Out.
Solved!
Go to Solution.

Satellite P755-S5390
Can't hurt to reinstall the drivers.
Realtek Audio Driver
nVidia HD Audio Driver
-Jerry

How to set audio hardware input channels for narration & to what?

Searched forum - hope I didn't miss solution for the following:
Using PE3 in Windows XPSP3
Tried for the first time to add narration to a project. Was using a stereo/microphone headset. Got nothing but noise. Could record in Windows recorder and Audacity. However, the microphone as part of the set would not work in Windows Audio Hardware Test Wizard. The set was using a sound chip on the motherboard.
A friend of mine has the same OS, motherboard and is using PE3. He too had never tried adding narration - but tried with a USP connected set, and was successful.
I removed my stereo set, and connected a USB set. To make sure all settings were reset, I did a cold reboot. The USB set worked in Windows Audio Test Wizard. I opened my project again, and in Edit/Preferences/Audio Hardware, clicked AIIO Settings. Unchecked the old set (Realtek) in both the Output and Input Ports area, checked the USB Audio Device, moved to the top of both lists.
Then tried to add narration and got the error message "Your current audio hardware selection does not have any input channels. Please use Preferences>Audio Hardware to correct this problem.
Thinking that maybe this was a preset for the project and couldn't be changed, I started a new project, no video, just tried to add narration, and got the same message.
The entries in the columns in the ASIO Direct Sound for Full Duplex Setup menu for the USB Audio Device in the Input section are: 2048, 0, 1, 16, Yes
The only one of these that seems to be able to be adjusted is the second number - the Offset (Samples). The Audio Channels number is set to 1 and doesn't seem to be changeable. Suggestions?

When working with Audio in most NLE's, i.e. Premiere Elements, or Pro, there are basically three areas that can affect how the Audio is handled on one's system. First, there is the Sound settings in Windows (from Control Panel). Next, the Audio card/chip probably/possibly has a console to make settings at the card/chip level. Last, and these are really two locations, but I'm only counting them as one since they are both in the NLE - Edit>Preferences>Audio & Audio Hardware. This is where Steve is referring to. Check all settings, and I'd suggest doing so in the order that I listed them above: OS, Audio card, then Premiere. A Mute, or by-pass in the first two, can override the settings in Premiere, and you may have its setting correct, but still not be able to effectively use your hardware.
The exact settings chosen will depend on the exact hardware that is properly installed. Without knowing all of your hardware and other settings elsewhere, one cannot give you a definitive answer. Ideally, in the settings drop-downs, you *should* see your hardware listed. Look closely, as these can be a bit cryptic.
If you are still unable to get your hardware working properly, a fourth place to look would be Control Panel>System>Hardware>Device Manager for your Audio hardware. Check that Device Manager sees your hardware, and that it is working properly.
If all is set up properly, but still not working, report back with exact specs on your system, including all of your Audio hardware. There are possibly some more steps that can be taken. I will not mention them now, as they *should not* be needed. If you do need further assistance, please list every option in all of the drop-down lists from Premiere, so we can know what your choices are.
Good luck,
Hunt

Can't choose audio device inputs...

I can't seem to select the desired inputs on for my audio device in STP.
One day it worked, but most others I can't configure it.
I can choose the device in the inputs tab, but it only lists the device name (AudioFire4) and not listing the different inputs available..
Is there some trick to getting this to work in STP? Everything works great in all other apps i use.. Peak, Live, Logic..
How should I be configuring Soundtrack Pro?
OS and Apps are all up to date, and I'm using an Echo AudioFire4 firewire interface..
Macbook

I am also perplexed and frustrated with this issue. I
have tried every combination and order of set-up but
can't get my M-Audio Black Box audio interface to
show up in STP. I can record just fine in GarageBand
but the interface doesn't even appear in STP. All
software is the latest including drivers, firmware,
etc. on the interface. I am wondering if the M-Audio
is just plain glitchy? Or is STP fussy?
Grrrr.
G5 Dual 2.0
Mac OS X (10.4.8)
UPDATE: After a lot of uninstalling and re-installing and plugging and unplugging (several times), I think I have stumbled upon the issue. Previously, I had the the interface plugged in through a Belkin powered USB hub. I tried plugging the interface directly into the front USB jack of the G5 and - voila - it works. I can see it and record through it in STP. Mystery solved, I guess. Could this be the problem some others have had in seeing their interfaces in STP? Good luck.
Terry
G5 Dual 2.0 Mac OS X (10.4.8)

No audio device in Encore CS3 - PPro works fine...???

I can't get any audio out of Encore CS3 - when I go to Edit/Preferences/Audio/Audio Output device it says "No Audio Device" under the device name. But Premiere Pro CS3 works fine with the driver for my sound hardware (via the ASIO driver for my RME Fireface 800). All other Windows apps work fine with the audio, as well (e.g. Quicktime, WMP, etc.). I'm using Win XP Pro w/ SP2.
How do I choose an audio output device in Encore?
Thanks,
rgames

Hi Neil,
I think I have the WDM drivers - the set I'm using is the latest that I see on the RME site (version 2.82 dated 12/6/07). When I check under the "About" tab in the Fireface settings it says "Windows MME, WDM, GSIF 2.0 and ASIO 2.0".
In Encore, all the inputs show up. But the only option under outputs is "No Audio Device".
Thanks,
rgames

X-fi xtreme audio pci ret (sb790) don't working as a midi device on win 7

windows 7 don't see subject card as a midi device.
old sbli've 5.. didn'd work properly on win 7 so bought sb790 just for the soundfont use.
soundfont manager failed to initialize(it's for xp,so that's maybe not ?surprising), soundfonts in sonar do not working.
installed drivers are from creative support page. speakers works good, but as a midi device card is just don't exist.

=}Uninstall everything you have installed (driver and software) and then try this,
http://forums.creative.com/t5/Sound-...-LS/td-p/55334

Is there a way to change the name of audio device inputs/outputs?

Hi there hope someone can help me. I use my macs primarily for music production and I have several audio cards both USB and PCI on my MacPro and I use external audio cards with my MacBook Pro both running Mountain Lion. As I have many different outputs I would like to rename them from their defaults, in other words I would like to rename "Headphones" to "Studio Monitors" and so on.
I have created Aggregate Devices which almost works as a solution as its possible to name them easily. The problem is with an Aggregate Device, the system Volume Control becomes greyed out and I can no longer change the volume using the Apple Keyboard.
I'm hoping that someone might be able to tell me which system file holds the names for the Audio Inputs and Outputs so that I can basically apply a bit of a hack to change my inputs and outputs to something a little more transparent? I don't mind applying tweaks to plist files etc as I have done this numerous times in the past to tweak some aspects of OS X.
The other solution would be to tweak the Aggregate Device settings to enable the volume control. Either option would be great especially when I am working on projects with friends who would be able to choose to listen to audio on a different set of monitors or headphones without having to ask me constantly which output is which.
All help appreciated!

These directions may be useful in the future but I was wondering how to change the actual name of the computer.
You know when you log into your iMac and then it loads all of your preferences?
Well at the very top of the login box, there is the name of your computer, I want to change that.
Not short names for Home folders.
Thank you though...
Any other suggestions or solutions?
Sam

(M-audio) Fast Track Pro - don't work anymore with 4.09

Hello,
I use a M-Audio Fast Track Pro as audio interface, and, until yesterday it was working perfect.
When I installed the Maverick 4.09, my audio interface just stop working!!
Do you know what could be happening, and how can I solve this?
Thanks a lot!
Fernando.

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

HELP! Channels don't work!

I just got a TV tuner card for my system to use in my dorm room. I installed MSIPVS, the tuner driver, and the tuner driver patch on MSI's site. When I autoscan for channels on MSIPVS, it finds some channels, but not really. What I mean is, none of them are checked! Can anyone help me fix this??

I have not used MSI TV products, though usually I would check if I have set the type correctly. Ex: PAL, NTSC etc.

Satellite P30-145: Don't have an audio device in 'Sounds and Audio devices'

Hi guys,
I've only just fixed one problem with the help of one fantastic member but now I have another!
All of a sudden my speakers decide not to work!! I checked the volume etc and alll was fine but when I went in control panel>sounds and audio devices it says I don't have an audio device!!!
It worked fine this morning and I havn't done anything that could have done this.
These problems I'm having are all spontaneous, I don't know what's going on!
Does anyone know how I can fix this and does anyone suspect virus activity? (I have done a scan which said I don't have any)
I use a P30-145
Many thanks

Hi
Did you check the device manager?? Is the sound card listed properly in the device manager or some yellow exclamation marks appear?
Did you try to reinstall the sound driver? If not, please try it.
Of course I would also recommend to update the anti virus applications and to scan the system for virus and malware

Video/Audio Chats Don't Work (Screen Sharing as well)

From the time that I got my mac, I have been able to both audio and video, although not screen sharing. I can live without screen sharing, but it would be nice to have if fixable. Now though, audio and video chats don't work at all. I always get an error message that reads,
"There was a communication error during your chat.
Failed to start Video Chat because:
_________ cancelled the connection."
I know that my friends aren't canceling the chats, and especially the appleu3test02 bot.
Any ideas?
Thanks
Message was edited by: pretty good, but not great

How have you set up your router or modem to allow the ports iChat uses ?
9:11 PM Wednesday; January 9, 2008

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

Can you use different audio devices for different apps?

I've paired my iMac with a set of Bose Companion 20's - they connect via the headphone socket. I regard these as my default audio device. However, when I work from home I need to use Lync 2011 for Mac and want to be able to use a bluetooth headset for lync enterprise voice calls (my employers chosen platform). Is it possible to use my bluetooth headset for incoming / outgoing calls when using Lync but the Bose speakers for say internet radio? If this is possible, any guidance as how to configure would be much appreciated. Thanks in advance....

After going to a particular folder and selecting a view, click the little Action Gear and select "Show View Options" and at the top check the box "Always open in xxx view" where xxx will be the view you presently have selected.
Do not check the bottom box to use this as a default or else all folders will then open this way.
Message was edited by: nerowolfe

No audio device found=no sound on OS9 (MDD Dual 867)

Hello,
i have a serious problem when running OS 9.2.2 on my dual 867 MDD. There is no sound ! In the "sound panel" i have a message like this ( i translate from french ):" Can't use audio device because it seems that another application use it". That is for "in" and "out" sound. When i try to play a movie in QuickTime, i have a message like this ( approximatly ): " you maybe can't hear the audio of the file because there is no audio device". I don't understand because there is no application running. I try everything: disable all preferences, disable all non-apple extensions, reset the pram, reinstall a clean system on other partition. Always the same problem. It's like that computer don't see an audio device - i mean the internal audio of the mac ! On OS 9.2.2 i'm running QuickTime 6.0.3 of course. When i boot on Mac Os X 10.3.9 and -for example- running "Classic QuickTime" i have sound.
So i don't understand. Someone can help me ? Thanks !
( sorry for my english
elzef

To make sure we understand:
when you boot your system direct to OS9, you have no sound.
When you boot to OS X, you have sound.
When you run classic from inside of OSX, you have sound.
Do you have anything like an iMic, 3rd party sound card (there are a couple of complanies that make surround sound cards for Mac), USB speakers, USB headset, or MIDI device connected?

Combining Audio Devices: Input Channels don't work

Similar Messages

Maybe you are looking for