Combining documents with multiple layouts into a single book for pdf export

I have made a series of documents that feature 3 different layouts, however I would like to connect all these documents into a book and then export 1 layout style from each document into a pdf to form a book. However when I go to the export book as pdf the option to select pages or ranges is greyed out and not clickable for some reason, does anyone know of another way to get around this short of exporting each individual document layout and then merging them as a pdf?

You need to set up the book to contain precisely what you want to export.
However, it is basically better to export single documents and merging them later as PDF, regarding colour spaces, page numbering, paragraph styles, page formats etc.

Similar Messages

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Combining information from multiple images into a single output

So I'm working on a class that takes input from three buffered images. The buffered images I will be using were covered in some detail [Here in this thread|http://forums.sun.com/thread.jspa?threadID=5401006&tstart=0] for the sake of reference.
I'll be providing 3 buffered images where the value of every pixel is the ID of the cluster. What I'm planning on doing now is looking at each cluster in each of the 3 buffered images I give the class to process.
public BufferedImage amalgamate(BufferedImage hueTemp, BufferedImage contrastTemp, BufferedImage textureTemp){
        imgWidth = hueTemp.getWidth();
        imgHeight = hueTemp.getHeight();
        hueRaster = hueTemp.getRaster();
        contrastRaster = contrastTemp.getRaster();
        textureRaster = textureTemp.getRaster();
        amalgamImage = new BufferedImage(imgWidth, imgHeight, BufferedImage.TYPE_INT_RGB);
        amalgamWriter = amalgamImage.getRaster();
        imagePixelCount = imgHeight * imgWidth;
        for (int x = 0; x < imgWidth; x++)
        for (int y = 0; y < imgHeight; y++) {
            // assigns pixel values from each buffered image
            hueValue = hueRaster.getSample(x, y, 0);
            contrastValue = contrastRaster.getSample(x,y,0);
            textureValue = textureRaster.getSample(x, y, 0);
            // reset values of integers storing pixel counts
            huePixelCount = 1;
            contPixelCount = 1;
            textPixelCount = 1;
            //. loop iterates through images and produces a pixel count for each of the
            //currently assign pixel values (each pixel value is also used as
            // the ID for each cluster)*/
            for (int i = 0; i < imgWidth; i++)
            for (int j = 0; j < imgHeight; j++) {
                if (hueRaster.getSample(i, j, 0) == hueValue) huePixelCount ++;
                if (contrastRaster.getSample(i, j, 0) == contrastValue) contPixelCount ++;
                if (textureRaster.getSample(i, j, 0) == textureValue) textPixelCount ++;
            }//end of i,j loop
            // this section will determine is the cluster is valid (i.e. makes up
            // more than 5% of the total percentage of pixels in the image)
            if (huePixelCount >= (imagePixelCount * 0.05)) hueValidCluster = true;
            if (contPixelCount >= (imagePixelCount * 0.05)) contValidCluster = true;
            if (textPixelCount >= (imagePixelCount * 0.05)) textValidCluster = true;
            //loop iterates and the Writable Raster will set the pixel values
           // of the output image to red, green or blue for Hue, contrast and
           //texture respectively and set all other pixels to black.
          //I'm using RGB so that I can use a different channel value for
          //each of the three, so that overlap will result in a new colour
          //(overlap between all 3 should = white pixel)*/
            for (int a = 0; a < imgWidth; a++)
            for (int b = 0; b < imgHeight; b++) {
                //This is my original method I devised
                if (hueValidCluster == true && hueRaster.getSample(a, b, 0) == hueValue) amalgamWriter.setSample(a, b, 0, 256);
                else amalgamWriter.setSample(a,b,0,0);
                if (contValidCluster == true&& contrastRaster.getSample(a, b, 0) == contrastValue) amalgamWriter.setSample(a,b,1,256);
                else amalgamWriter.setSample(a,b,1,0);
                if (textValidCluster == true&& textureRaster.getSample(a, b, 0) == textureValue) amalgamWriter.setSample(a,b,2,256);
                else amalgamWriter.setSample(a,b,2,0);
              //When the image returned a completely black output I tried a different
              //approach along these lines assuming the .setPixel method
             //would have done what I wanted.
              if (hueValidCluster == true && hueRaster.getSample(a, b, 0) == hueValue) amalgamWriter.setPixel(a, b, redArray);
                else amalgamWriter.setPixel(a,b,blackArray);
            }//end of a,b loop
            //Reset booleans for next pixel in the original x,y loop.
            //I've been using ping to make sure the thing doesn't crash while it's running.
            hueValidCluster = false;
            contValidCluster = false;
            textValidCluster = false;
            ping++;
            System.err.println(""+ ping);
        }//end of x,y loop
        return amalgamImage;
    }//end of amalgamate method
}//end of AmalgamationAs previously hinted the class seems to run to completion, but the image returned is always black so the pixels aren't being set or they're somehow being reset?
If the error is due to me setting the pixels in the output image incorrectly then the root of the problem is temporarily eluding me.
I'm not sure if there are compatability problems between USHORT (which is the format the input images are in) and an INT_RGB BufferedImage which could be the cause so I thought I'd mention that.
It's also crossed my mind that in using a loop inside a loop inside a loop I possibly have done something wrong there.
Thought I'd throw this problem out there. I've been de-bugging this one for a while.

amalgamWriter.setSample(a, b, 0, 256);
amalgamWriter.setSample(a,b,1,256);
amalgamWriter.setSample(a,b,2,256);For the image type you are using, you only have 8 bits of precision each color channel. That means only a number in the range [0,255] is valid for the sample. The value 256 is equivalent to setting the sample to 0. That is ((byte) 256) = 0.

Scan multiple pages into a single PDF document?

How can i scan multiple pages into a single multipage PDF file?
I've seen similar questions posted, but I haven't found any good answers. The only advice i saw was to scan each page as a separate PDF document, then merge them into a single PDF using third-party software.
Obviously, i don't want to have to do that.
I can't believe that there really is no way to do it using the existing HP print/scan utilities provided with the hardware.
My printer/scanner is the "HP Photosmart 5514 e-All-in-One Printer - B111h", and i'm running Vista (64-bit) on an HP Pavillion notebook.
This question was solved.
View Solution.

Hi,
From the HP Scan software (Start > Programs > HP > HP Photosmart 5510 Series > HP Scan) select PDF and ensure the resolution is 300 DPI or lower.
Ensure the Show Scan Preview option is checked and click on Scan.
Once scanning the first page completes, place the next page on the glass and click the plus button below the scan preview...
Once you are done click on Save.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hiding filenames when combining multiple files into a single .pdf

I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
-Ss

Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
If you want, I can send the file to you.

HP Envy 4501 won't scan multiple pages into a single document

My HP Envy 4501 Printer won't let me scan multiple pages into a single pdf document.
I already made sure that the checkbox "Create a separate file for each scanned page" is not checked under the file section in advanced settings.
After I scan the first page, I do not get a screen with a + (plus sign) that is supposed to allow you to scan additional pages into the same document.
Is there any way that I can get a fix/update for my HP Envy 4501 Printer software that would show the screen with the + (plus sign) that allows you to scan additional pages into the same document after you scanned the first page?
At this point, if I don't get this problem fixed soon, I'm about ready to return my HP Envy 4501 Printer back to the store I bought it from so I can get my money back and buy a printer from one of HP's competitors before my store warranty runs out.
I am very dissatisfied with HP's printer software, their support services and their web sight that doesn't work half of the time.
Thanks,
Mark
This question was solved.
View Solution.

Hi Mark,
Great to see you are up and running now.
Such an information is available within the online documentation at hp.com:
Scanning additional pages is supported at 300 dpi or lower.
http://support.hp.com/us-en/product/HP-ENVY-4501-e-All-in-One-Printer/5304875/model/5368518/document...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Combining multiple lists into a single list

Hi,
I have created 5 different lists within the same sharepoint site. These lists have some common fields among them for example each list has same fields such as "Country", "Unit", "Review Name" etc. I now want to create a single
list that will have show only the common fields present in each list. Could you please advise if this can be done and if so how?
Thanks, Aarti

To have a full fledged synchronization between 5 lists will be very complicated.
If the 6th list is a read-only / view only, I would recommend you to create Lists 1, 2,3,4 and 5 as a custom content type.
Then you can put a Content Query Web Part that filters out your custom content type and combines the content from the three lists.
or create a workflow to update the data when new item is added in other lists
Check the similar post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2480cdbe-acb4-434f-9866-cf716cad0994/combining-multiple-lists-into-a-single-list?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5a853466-7480-438a-b32d-3ad6d34347ef/combine-lists?forum=sharepointdevelopment

Word document with multiple sections generates multiple pdf?

Hello everyone,
I'm a new and happy Mac user, but not fully able to use this. I hope you can help.
I have a Word document, with multiple sections that I want to convert into pdf. When I used to do this with the PC, I didn't have problems. I used to use Click to Convert and I normally used to get one single pdf file.
Now, using the pdf button wit the Mac, I get separate pdf files, one for each section. Is there a way that I can create a single pdf, with all the sections in order? If not, how can I merge the pdf in one single pdf file?
Thanks in advance.

Hi,
just to let you know I have sorted this.
http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html
Thanks.

__Is there a way to 'merge' multiple curves into a single curve?

__Is there a way to 'merge' multiple curves into a single curve?
By this I mean I have file with 2-12 curve layers - I wanted to 'merge' the curves so that I can end up with a single curve with the attributes of many. Maybe is there a script that would do this?

I don't mean to be critical, but how do you get to a situation where you have 12 successive Curves layers?
The advantage to a Curves layer is that you can adjust and re-adjust it to your heart's content.
If you're habitually adding new Curves layers one over the other, maybe you should re-evaluate your process of working... Perhaps the way you're thinking you should just work at a high bit depth and do repeated Curves operations on the pixels? Or put some time into retraining yourself to not add a new Curves layer but to manipulate the one that's already there. There are some nice new enhancements (e.g., the "finger" subtool that allows you to choose a spot in the image and manipulate that part of the curve).
Again, I'm not trying to criticize you, just looking to see if maybe there's a way to avoid getting to the point where you need to combine Curves in the first place, since there's no direct "Merge Curves" capability, outside of just stamping a set of image and adjustment layers into pixels. For completeness I suppose I should mention how to do that... You can Stamp any combination of visible layers into a single layer of pixels (effectively combining all the Curves layers et. al.) by pressing Control - Shift - Alt - E.
-Noel

How To Concatenate Column Values from Multiple Rows into a Single Column?

How do I create a SQL query that will concatenate column values from multiple rows into a single column?
Last First Code
Lesand Danny 1
Lesand Danny 2
Lesand Danny 3
Benedi Eric 7
Benedi Eric 14
Result should look like:
Last First Codes
Lesand Danny 1,2,3
Benedi Eric 7,14
Thanks,
David Johnson

Starting with Oracle 9i
select last, first, substr(max(sys_connect_by_path(code,',')),2) codes
from
(select last, first, code, row_number() over(partition by last, first order by code) rn
from a)
connect by last = prior last and first = prior first and prior rn = rn -1
start with rn = 1
group by last, first
LAST       FIRST      CODES
Lesand         Danny          1,2,3
Benedi         Eric           7,14Regards
Dmytro

Record Working Time task merging multiple employees into a single task

Hi Everyone,
I'm going to check our configuration again to see if this is standard behaviour, config, or a problem with EHP 3's version of record working time.
So if employee A submits to manager A 1 task is created. Then when employee B submits to manager A we were expecting 2 tasks. However, we've been noticing manager A is getting 1 task with several line times.
We are ok with it merging tasks for employee A over multiple weeks. That is ideal actually.
The problem is that employee B's task should be separate.
Is there a quick fix?
Thanks,
Doug Robbins

I did try 31000007 and noticed the same behavior. Are you saying I should use an older version of the task to get back to grouped by employee number and not merging everything?
Well this causing us issues for a few reasons. The main one we developed a work around because we had to make sure emails were not being sent to 1 person for all the employees with their data. That would cause obvious security concerns.
But when forward tasks out managers want to be able to forward a specific employee's requests and not all of them. If some customers want this it should be a configurable option. To allow companies that want 1 single task or companies that want 1 task/employee/week.
This is inconsistent with the other portal applications. It would be nice if Germany picked 1 way of doing things or provided more configuration options. I'm hoping that OSS gives us something because merging everything into a single task for all employees is not the behaviour we want or expected.
I always appreciate your input because you have been very helpful as I learn about portal.
Thanks,
Doug R
Thanks you

Concatenate multiple records into one single record

Hello everyone,
Can anyone guide me how to merge multiple records into one single record
like......... I am getting the data in the file like
aaaaa/bbbbbbb/ccccccccccc/dddddddddddd/eee
ffffff/gggg/hhhhhhhhhhhhhh
/123/4567/55555/99999999/kaoabfa/eee
fffff/kkkkkkkk/llllllllllllllllllllllll
when i use gui_upload I am getting the data into the internal table in the above format.
My main intension is to split the record at / to multiple lines and dowload it into another file.
What i am planning to do is... if the line does not start with / then i want to concatenate the multiple lines into single line and then split it into multiple records. Can anyone guide me how to achieve this.

Yes, it should work.
In my example
Loop at itab.
concatenate i_text itab into i_text.
endloop.
You change that loop for the loop of your internal table with the file records
So if you have this three records
'aaaa/bbb/ccc'
'/dddd/efg'
'hijk/lmn'
i_text will look like this at the end
'aaaa/bbb/ccc/dddd/efghijk/lmn'
then in this part of the code
split i_text at '/' into table itab2.
itab2 will have the records looking like this
aaaa
bbb
ccc
dddd
efghijk
lmn'

Displaying data from multiple columns into a single line graph

Post Author: hollowmatrix
CA Forum: WebIntelligence Reporting
Hey,I have an issue with the WEBI reporting.I have a data source that has multiple columns say ( month1, month2, month3, month4,.....month 12, month 13, ....month24) with the sales data for each month.Now say I call the month 1 to month 12 as "current year", and call month 13 - month 24 as "previous year".I want to put a prompt in the report which allows me to select between "current year" and "previous year".Based on the prompt value we get a graph of the sales vs month ....as in if we select "current year", then we get a graph of the sales Vs time( remember that the sales data for each month is in a different column.)and if we select "previous year" then we get a graph of the sales Vs time for previous year..( sales vs time for Month 13, month 14, month 15....month 24).I am not able to pull data from multiple columns into a single object that I can use to populate the graphs.Any help on the same will be appreciated .

Hi,
<p>
please click
here (asktom) and look for the words "how about the other way round"
</p>

Portal with multiple layout !!!

Hi,
I've seen a lot of questions in this Newsgroup regarding the development of a
portal containing multiple layouts, but no clear answers was given.
If the only way to develop a portal with multiple layout is to not use the portal
framework, please could you give me a detailed approach how to do it (maybe there
is Howto document somewhere ...) !
Thanks for your help, I'm stuck and unfortunately not very familiar with the product.
/Julien

Thanks Phil,
OK, then could you explain me how to build a simple portal without the portal/portlet
facilities, but taking advantage of the personnalization tags available.
- e.g. Which APPLICATION_INI I need to setup ?
I appreciate your help
/Julien
"Phil" <[email protected]> wrote:
>
Julien - BEA's next portal release (version 4.0) will
have complete support for a variety of different
layout templates. There will be a selection of layouts
out-of-the-box as well as the ability to provide your
own custom layout. Also, "tabs" will be added to the
portal and each tab may use a different layout template.
Version 4.0 is scheduled for Fall 2001.
With previous versions of the portal product, you will
need to edit/customize portalcontent.jsp and the jsp's
it calls. The layout Html is spread through them, so it
is not a fun excercise.
-Phil
"Julien GATTONI" <[email protected]> wrote:
Hi,
I've seen a lot of questions in this Newsgroup regarding the development
of a
portal containing multiple layouts, but no clear answers was given.
If the only way to develop a portal with multiple layout is to not use
the portal
framework, please could you give me a detailed approach how to do it
(maybe there
is Howto document somewhere ...) !
Thanks for your help, I'm stuck and unfortunately not very familiarwith
the product.
/Julien

M276 Unable to scan multiple pages into a single file

Hi, just bought the Laserjet Pro 200 M276nw, and when I scan multiple-pages documents, it generates one PDF document for each page scanned, but I want this multiple pages into a single PDF file. Anyone can help? Thanks so much

Yes it's possible. Use the Image Capture app. It has an option to scan PDF documents into a single file.

Combining documents with multiple layouts into a single book for pdf export

Similar Messages

Maybe you are looking for