Combining Dreamweaver pages?

Hello, i have about 9 pages in total for Jquery Mobile in dreamweaver. This will be for a mobile application. I was wondering how do i combine the pages to make them work in unison?
I have my homepage buttons linked to all the other pages ive created, but i dont know what to do next. So i have all my content, pages, ect. Now what do i do with the 10 pages sitting my folder after i have linked the buttons, added the content ect? I am not sure how to get it ready to publish now that most things are completed, i think, in dreamweaver.
Is this where Phonegap comes in ?

I have a different although related issue. I run Acrobat 9 pro on a mac.
In addition I have a windows based software program on another PC that creates large charts for family history which are then printed on a continuous plotter. However it is configured to max length of 9 feet or approx 274cm. So when I have charts (complete with lines and boxes full of names linking everyone) greater than 9 feet long I end up with a PDF file with two or more pages. The output I am seeking is one continuous seamless plot so I'd like to a) combine the pages into one [i managed this] and b) more importantly remove the small gap and page break dotted lines [say a cm or so] between the pages and line up the charting lines and boxes. any ideas please? 

Similar Messages

  • How do i combine single pages into documents with Adobe?

    How do i combine single pages into documents with Adobe?

    Hi zebideeplus,
    Using Reader, you need to purchase subscription for Adobe PDF Pack  to combine PDF files into single document.
    Refer: Acrobat.com Help | Adobe PDF Pack FAQ
    But, if you need to combine single pages, then it can be done with Adobe Acrobat only.
    Let me know if you have further queries.
    Regards,
    Anubha

  • Bug in Automator's Combine PDF Pages action?

    Hi guys,
    I've been playing around with 10.6's new Automator and Services. I decided to make an Automator Service so that if I have some PDFs selected in Finder, I can combine all the pages into one PDF and save it to a location. So I created the following service:
    * Get Selected Finder Items
    * Combine PDF Pages (appending pages)
    * Move Finder Items (to Desktop by default, show this action when the workflow runs)
    * Rename file (comes up as Name Single Item in Finder Item Names, show this action when the workflow runs)
    I tested this in Automator by selecting some PDFs on my desktop and hitting the Run button; everything worked out well. So I saved it as an Automator Service, only available for PDF files but in all applications (drop down lists at the top of the Automator window).
    I noticed however when I ran this workflow as a service, the pages in the resulting PDF file is actually duplicated. For example, if I had page 1 in page1.pdf, and page 2 in page2.pdf, running the service on these two files will produce a PDF with the following pages: page 1, page 2, page 1, page 2.
    Does this happen to anyone else in here, or is it just me? I tried saving the workflow as an application, placed it in the Dock, and then dropped my test files on it and it does the same thing. And this happens with other PDF files too.
    Is this a bug? Can someone confirm that it happens on their machine too?
    Thanks.

    Anyone? It doesn't take long to create an Automator workflow with the 4 actions above. Probably 2 minutes max. Can someone test on their machine?
    I tried to do the same with my MBP, which I also upgraded to Snow Leopard, and it does the same thing there. For some reason, it works perfectly when the workflow is run within Automator, but when it's exported as an Application or a Service, it duplicates pages.
    I tried to submit a bug report to Apple, but I couldn't log in with my current Apple ID -- it shows me an error page to submit a bug report! That's what I've been trying to do in the first place, but it seems the bug report process has bugs that they want you to report on. Chicken and egg scenario methinks.

  • After adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript

    after adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript
    I have no trouble viewing other websites with (most likely), flashfiles.
    Here is the the PopUp message:
    "Adobe-warning Adobe Flash PLayer has stopped a potentrially unsafe operation......"

    In newer versions of Flash Pro, you can export to HTML5 Canvas, that's probably what they're talking about: Flash Professional Help | Creating and publishing an HTML5 Canvas document
    .FLV and .SWF are Flash formats that won't show up on iOS (or an ever increasing number of other mobile devices). Mobile Flash was killed by Adobe a couple years ago, so the number of mobile devices that can see it is dwindling rapidly, don't use those formats if you want your viewers on mobile devices to see your content.

  • Is there a way to combine multiple pages into a single document?

    In the program "Pages," is there a way to combine multiple pages in a single document?

    Jean Louis Gassee, who used to be a senior Apple executive, wrote on Apple's bad approach to the latest iWork suite:
    https://discussions.apple.com/message/25209121#25209121
    Peter

  • 2Sided Original 1Sided ADF Scanner -Combine PDF Pages -  Data Error?

    I just purchased a scanner with an Auto Document Feeder, ADF, of 25 pages after trying to use it I found out through the company that it only scans one side. I have another ADF scanner where the software allows the user to flip the pages over and then reinserts them for the final PDF file. Instead of spending more on a double sided scanner I figured I would create a program using Automator.
    The script I created worked a few times but after some tweaking it stopped.
    The problem is just before the Combine PDF Pages where I have two "Get Value of Variables" which I set as PDF Documents at the beginning of the script.
    The log reads before and at the point of error;
    Conversion from Files/Folders (com.apple.applescript.alias-object) to PDF files com.apple.applescript.alias-object.pdf) completed.
    . ! The action "Combine PDF Pages" was not supplied with the required data.
    The variables are showing the entire path to include the filename and extention of my selected PDFs, but the log above the error seems to change the variable to the appropriately desired object.
    ? What I need to do to correct this error because it seemed to work earlier by using variables?
    The script would be useful for any type of ADF scanner that outputs one-sided to PDFs and the originals are two-sided.
    Your help is appreciated.
    KGz
    Message was edited by: KGz

    Red
    I have been working in Automator for this program and saved it as an Applescript plug-in for the Scripts Menu. I don't have to have it as a script I just need it to work.
    The pecular thing was while testing the program in Automator before exporting it to the plug-in the program was skitish meaning that at first it didn't work then I added 'view results' and then afterwards it seemed to work. After this I removed 'view results' and it worked then I exported it but since then I can't get it to work again even after reinserting 'view results'.

  • Import Fireworks slideshow to Dreamweaver page

    Hi,
    I created a photo gallery (slideshow) in Fireworks CS4 and everything is working smoothly. Now I want to add this slideshow to my Dreamweaver page BUT I am new to this and I don't know how to include it.
    I noticed that depending on the type of fireworks player it creates different files (html, swf). I used the FW slideshow template: Player - Black (Flash Plug In not required) and it created an index.html file.
    How can I add the index.html page to my website template? I want for it to show after my navigation bar etc.. I don't want it in a seperate file but include it to my PhotoGallery.html page.
    I also tried different players and I can't get for it to load. SWF files do not play when i check it in LiveView.
    If someone can help me with this I would appreciate it. I have been struggling for a day now and I can't get it to work with any type of player.
    Thanks in advance!

    Thanks for your reply. I did try the copy and pasting before contacting this forum and it doesn't work.
    I would appreciate if someone had a tutorial on this and thanks for asking someone to post this.
    I'm new to the Adobe world and I'm liking it! There are so many features in the software that I just want to make sure that I learn the proper way to incorporate the 'objects'.
    In the mean time what I have done is created an iframe.
    <iframe src="otherpage.html"/>
    This is working for now but I'm sure there is a better way!!

  • How can I place a Lightroom 3 image gallery in a Dreamweaver page?

    I would like to use an image  gallery that I built in Lightroom 3 in a Dreamweaver CS5 website. I  would like the image gallery to operate on my Dreamweaver page, not to  be re-directed to a different page.
    I'm pretty sure this  is possible, but in my search for help in the forums, books, etc., I am  not having much luck. Perhaps I'm using the wrong search words? Help to  direct me would be very much appreciated. Cheryl B.

    You'll need to work in CodeView.
    Copy the relevant code from your image gallery page into your site page.  Adjust paths to images & scripts as necessary.
    Another simpler approach, insert an iframe into your site page. Point the iframe src to your gallery.html page.  Adjust iframe height and width to accommodate the size of your gallery page.
    http://w3schools.com/html/html_iframe.asp
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Combine LR Pages with other templates, How?

    Just bought LR pages from The Turning Gate. There is some info on their
    website about combining LR pages with other templates. But I already
    get stuck reading this information. Is there someone who would explain
    this to me? I know a lot about photoshop, but this is something different.
    Best regards,  Marion

    Hi Sean,
    Thank you for the advice
    best regards, Marion
    Op 17 jun 2009, om 13:24 heeft Seán McCormack het volgende geschreven:
    You really need to deal with Matthew on this Marion.
    >
    Here's the relevant support link:
    >
    http://www.lightroomforums.net/showthread.php?t=1527
    >

  • PDF converter and combine PDF pages are blank?

    I signed in to Adobe and tried to use the PDF converter, but the page is blank.  The combine PDF page is blank also.  What happened?  I can see the other tabs, but these two are blank.  Need to know what is going on. Thanks.

    Now it shows up after 30 minutes of trying. 

  • Combine PDF Pages automator step strips annotations

    Oh, I was so excited when I noticed the Combine PDF Pages command in Automator.
    Then I was less excited when I discovered that if any of the pages has annotations created in Acrobat Pro, those annotations are removed from the newly combined PDF.
    Since Preview, for some strange reason, is not AppleScript-able, Automator is the only way I see to do this.
    Acrobat is somewhat scriptable to a degree but does not have a combine PDFs command in the dictionary.
    So, has anyone figured out a way to automate the merging of PDFs via a script, workflow, app, etc -- while RETAINING the annotations? I am triggering this from FileMaker as part of a work process we're developing, so manually merging the PDFs kind of defeats the purpose.
    Anyone have any suggestions?
    Thanks,
    Jeff

    Found It!
    Ok, so it seems "insert pages" is in the Acrobat dictionary; I was looking for an equivelant of "Combine Files into Single PDF".  Anyway, here's draft one of the script. I'll probably make it less clunky next week, but this is basically how it works:
    set nFile to ""
    set pCount to 0
    set pdfList to {}
    set pdfNameList to {}
    set sourcePath to "SL:Users:joeuser:Desktop:fix ccd:Source:"
    set targetPath to "SL:Users:joeuser:Desktop:fix ccd:Target:"
    set coverFileName to "cover.pdf"
    tell application "Finder"
    move file (sourcePath & coverFileName) to folder targetPath
              set my pdfList to every file in folder sourcePath
              repeat with f in pdfList
                        set pdfNameList to pdfNameList & (name of f)
              end repeat
    end tell
    tell application "Adobe Acrobat Pro"
    --activate
    open (my targetPath & my coverFileName) with invisible
              set targetDoc to last document
              set my pCount to (number of pages) of targetDoc
              get my pdfNameList
              repeat with f in my pdfNameList
                        set c to number of documents
                        open (sourcePath & f) with invisible
                        repeat until c < (number of documents)
                        end repeat
                        set newDoc to last document
                        set nPages to (number of pages) of newDoc
      insert pages targetDoc after my pCount from newDoc starting with 1 number of pages nPages
                        set my pCount to (my pCount) + nPages
      close newDoc
              end repeat
    save targetDoc
    close targetDoc
    end tell
    tell application "Finder"
              set f to file (my targetPath & my coverFileName)
              set name of f to "New Merges PDF.pdf"
    end tell

  • Running swf file within a dreamweaver page

    Hi all ive been really struggling in getting my web shot gallery to run with my dreamweaver page on my site, ive managed to get it running on its own on my server but soon as i put in my site it does not run, i only get a white screen
    www.gazell.co.uk/renault.html
    thats the white screen but if you navigate on the left go to photos then renault the actual gallery works but not with the page i would like
    please advise Thanks

    Have you uploded al lscripts associated with the SWF? Auxiliary SWF assets such as palyer skins? Was the gallery created relative to the same root directory as your site? One problem I definitely see is the use of spaces in file names, which could lead to names being truncated or misinterpreted....
    Mylenium

  • Slide presentation for Dreamweaver page

    Dumb question - how do I create a slide show presentation in
    Flash (single pictures, no text) and then get it into a Dreamweaver
    page? Thanks!!!!!!!!!!!!1

    The steps are fairly simple. I create a listener ,a loader
    and an empty movie clip to load the images into. I write a
    listener_mc.onLoadInit function then I use the loader_mc.loadClip
    to load the images into the empty movieclip. When the loading is
    complete the onLoadInit function gets called and you can resize and
    center your images.

  • Adding flv movie to dreamweaver page

    so I am trying to add a flv to a dreamweaver page... looking at the help files.. I need to have either Sorenson Squeeze or On2 codecs... both which cost money..    It was initially a wmv file. which I converted to flv...
    is this true that I need to pay hundreds of dollars for either Sorenson or On2 codecs to have these video files displayed on my html file?   I do use dreamweaver.
    is there any other way to do this?  or is it definite that I have to purchase from the above.
    If not, how else do I display an flv file in dreamweaver...
    appreciate all knowledge.
    thanks in advance.
    J.

    If you already have an FLV file in your possession, Save it to your DW Local Site folder.  I like to put my videos into a Media folder, but that's not mandatory.
    In DW, hit Insert Menu > Media > Flash Video > Progressive Video Download. 
    Browse to the Flash Video file -- in your local site folder.
    Choose a player skin.
    Hit OK.
    Upload page and all dependant files to your remote server.  Be sure to include your Scripts folder, FLV and SWF files.
    If your native video is in some file type other than FLV, you must convert it first.
    RIVA Flash Encoder for Windows is free.
    http://download.cnet.com/Riva-FLV-Encoder/3000-2140_4-10320097.html
    You'll find a boat load of others in a Google search.
    Good luck!
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Link Robohelp Page to Dreamweaver Page

    I need to link a specific Robohelp document to a Dreamweaver
    document but all I am able to link to is the welcome page and the
    user then has to search for the page I am refering to. How do I
    link the pages?

    Welcome to the forum.
    You say you want to link to a Dreamweaver document but then
    say all you can link to is the Welcome page which sounds like the
    RoboHelp default topic.
    I suspect that what you want is for a Dreamweaver page to
    have a link in it and that link is open a RoboHelp topic, also the
    RoboHelp topic is not the default topic. Is that correct?
    If so the link will be the relative path to the RH start
    page, the topic that opens the help as defined in the first page of
    the RH wizard, then followed by hash and the path to the required
    topic. Something like
    startpage.htm#pathtofolder/requiredtopic.htm.
    Take a look at the topic on my site about calling webhelp
    using urls.

Maybe you are looking for