Combining heterogeneous data sources in a single data target

Dear Experts,
I have a requirement as below for combining multiple data sources (different key fields) into a single target
Target Key Fields : sales doc, item, schdl line, delivery no and delivery item.
1 source key fields : sales doc and item  (VAITM)
2 source key fields :sales doc, item, schdl line, delivery no and delivery item (V_SSL)
3. source key fields : delivery number and delivery item. (VCITM)
Is there an innovative way of combining all these records in a single record in data target rather then creating multiple entries (due to different source keys) rather than using a conventional look up routines.
We are on BI 7.0.
Thanks,
Rita
Edited by: Rita Tripathi on Jan 19, 2012 7:05 PM

Hi,
Target Key Fields : sales doc, item, schdl line, delivery no and delivery item.
1 source key fields : sales doc and item (VAITM)
2 source key fields :sales doc, item, schdl line, delivery no and delivery item (V_SSL)
3. source key fields : delivery number and delivery item. (VCITM)
You can actually create a View on (1) and (2) tables in SE11 and then create a generic datasource in RSO2.
You create one more generic DS from (3) table.
Combine these two DS in an Infosource and update to DSO.
Regards,
Suman

Similar Messages

  • Process Chain : Read PSA and Update Data Target in BI 7.0

    Hello Experts,
    In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
    In the variant " Read PSA and Update Data Target". the selection Parameters were
    PSA.Table : 0GLACCEXT_T011_HIER_BA1
    Selection Object Type : same Infopackage in Varaint Execute Infopackage
    the Error message was Variant doesnot contain a valid combination request/data target
    I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
    0GLACCEXT_T011_HIER_BA1
    0GLACCEXT_T011_HIER_BA2
    0GLACCEXT_T011_HIER_BA3
    0GLACCEXT_T011_HIER_BA4
    All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
    I can't understand why there exists four PSA Tables?
    I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
    If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
    but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
    How shall I handle this issue?
    Please carify me the issues as soon as possible.
    thanks in advance
    Regards
    sailekha

    Hello,
    In the Variant Read PSA and Update Data Target I have to select  the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
    I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table  then only I can save and  include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
    I checked the PSA using the Transaction  RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
    I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
    I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
    Thanks & Regards

  • Can we combine multiple data sources in single report?

    <span style="font-size: 10pt; font-family: Verdana">Can we combine multiple data sources in single report?</span>

    If you can&#39;t do this at the Metalayer (BVs or Universe) - then subreports and shared variables are the method for CR to use multiple datasources in the same report.

  • Data Extraction from Multiple data sources into a single Infoprovider

    Hi Experts,
    Can anyone send me links or examples on how to extract data from multiple data sources into 1 Cube/DSO.
    Can anyone send me example scenarios for extracting data from 2 data sources into a single Cube/DSO.
    Thanks
    Kumar

    Hi Ashok,
    Check the following link from SAP help. Ths is probably what you are looking for.
    [ Multiple data sources into single infoprovider|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
    Data from multiple data sources which are logically related and technicall have the same key can be combined into single record.
    For example, if you have Sales order item and sales order item status .
    These both have the same key - sales order and item and are logically related.
    The Sales order item - provides information on Sales order item - material , price, quantity, plant etc.
    The item status  - povides information on delivery status, billing status, rejection status....
    These are two different data sources 2LIS_!1_VAITM ad 2LIS_11_VASTI.
    In case you have few master data attributes coming from different systems ie tow data sources in different systems say completely defines your master data. Then you could use a DSO or infoobject to combine the records.
    If you want to see aggregated data you use a cube.
    ie say you want to analyzae the customer revenue on a particular material and a particular project.
    The project details would come from Project syatem and Sales details fom sales flow.
    The data is then combined in the DSO with key cutomer and sales area say.
    Then it is aggregated at cube level...by not using sales order in the cube model...so all sales order of the same customer would add while loading the cube.. to give direct customer spend values for your sales area at aggregated level.
    Hope this helps,
    Best regards,
    Sunmit.

  • Integrating ADF Business Components from heterogenous data sources

    Hi all,
    has anybody experience in integrating ADF Business Components from heterogenous data sources like ViewObjects from a DB2 database as LOV in a ViewObject from a Oracle 11g?
    What is the best practice approach to integrate such different ADF Business Components in declarative and programmatic ways?
    Thank you!

    thank you for the answer! We already updated out BC according to http://www.oracle.com/technetwork/developer-tools/jdev/multidatabaseapp-085183.html
    The DB2 ViewObjects are exported as ADF Libraries and imported in the BC of the project with Oracle DB ViewObjects. In the root AM I created instances from the imported DB2-ViewObjects as well as from the Oracle-ViewObjects, but when I start AM test environment it takes the preconfigured Data Source of the root AM. So I probably will pesneed to create two AMs for the different ViewObject types and for the two connection types. My question is what will be best practices to use data from the DB2-VO of AM_DB2 in the OracleDB-VOs as part of AM_Oracle? Should it be done only programmatically or can it be done also declaratively and any suggestions how to proceed?
    Thank you!
    Edited by: nbo on Jun 3, 2012 2:53 AM

  • OLAP cubes from heterogeneous data sources using XML DB

    hi.
    Q:1
    How we can create an OLAP cube (XML cubes) from XML data sources if using XML DB.
    Q:2
    How we can create an OLAP cubes from warehouses and flat files and covert these cubes into XML cubes.
    Q:3
    Is there any other tool (Except Analytical workspace manager AWM) which supports the construction of OLAP cubes in XML format from heterogeneous data sources?
    Edited by: user11236392 on Aug 21, 2009 3:50 AM

    Hi Stuart!
    Your undersatnding is partially correct. i am working for providing an architecture for XOLAP, XML is one of my data source.
    The idea is to generate uniform cubes from heterogeneous sources that can be integrated into a global cube. instead of building Oracle OLAP cubes from all the sources (this work is already done) i want to generate an XCube from XML data sources using XQuery.
    On the other hand if we have generated the Oracle OLAP cube from other sources like warehouses or flat files. i have to convert these Oracle OLAP cube into XML cube for uniformity. in an research paper i find that there is an operator Xcube embedded in XQuery which converts the multidimensional data (cube) into XML cube. im looking for the implementation of this operator in Query that how this operator works.
    hope u understand my architecture. but if u still have some confusion, kindly give me ur mail id. i will mail the diagram of my architecture.
    thanks.
    saqib

  • One data source and assign multiple data target in BI?

    Hi all,
    Is it  possible is to assign one data source to multiple data targets in BI? Not like  in BW 3.X ; one data source can assign only one Info source. I am bit confused about it, let me know about this ?
    Regards.
    hari

    Okay, I must have misunderstood your message, I was thinking BI 7 and data targets .. like cubes and DSO's.
    In 3.x, assign your datasource to a single infosource.  Then assign that infosource to multiple data targets by creating update rules and assigning your infosource to each/all of them.
    In this way, you shouldn't need multiple infosources per datasource unless you have a special situation that calls for it.
    Brian

  • Can we send the data into different data target from single datasource how

    Hai
    can we send the data into different data target from single datasource how ?

    Hi,
    Create the transformation for each target and connect through DTP if you are in BI 7.0
    If it is BW 3.5 create transfer rules and load it Info source and then different update rules for different targets then load it using IP.
    If you are speaking about loading data from R3 data source to multiple data sources in BI
    Then follow the below step.
    1)create init IP's and run the IP's with different selection to different DSO(With same selection it is not possible).
    2)Then you will have different delta queues for the same data source in RSA7
    3)Your delta loads will run fine to different data sources from same DS in R3.
    Hope this helps
    Regards,
    Venkatesh

  • Error in Source System While Uploading Data from ODS to Data Target

    Hi All,
    Iam getting Following Error while Uploading data from ODS to Data Target
    a) Error in Source System.
    b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
    The time stamp in the source system is 21.06.2005 07:31:33.
    The time stamp in the BW system is 27.11.2004 17:41:45.
    Regards,
    Chakri

    This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
    1. Check for the coonect between the sourse & target systems
    2 . Replicate the data sourcses.
    3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
    Thanks ,
    PSG

  • Data source and data target for p.o condition records

    Hi All,
    can any one help me what is the data source for p.o and shedule line  condition records and their data target
    Thanks
    sivakumar R

    hi sri,
    to pick up the condition records from the table table konv with respect to the p.o no  and also schedule line with condition values from table A016 any data souce and any data target are available in standard.
    pl help on this
    Thanks
    sivakumar R
    Edited by: Siva Kumar on Feb 19, 2010 10:22 AM

  • How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

    How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

    You have to use custom JavScripting to concatenate the first 2 fields. You cannot use the first 2 calculation options because they force the values of the fields to a numeric value or ignore string values.
    Possible scripts for the 3rd field are:
    event.value = this.getField("Text1").valueAsString + " " + this.getField("Text2").valueAsString;
    or
    event.value = this.getField("Text1").valueAsString.concat( " ",  this.getField("Text2").valueAsString);
    If you do not want change the separator or not show the separator when on or the other field is empty, you will need to add more code to adjust for change.
    The above scripts will also concatenate number because the field values are read as strings and not numbers.
    There is also a generalized user written function to concatenate up to 3 fields with a separator that adjust for missing data.

  • What are all the Standard Data targets&Data source for Warehouse management

    Hi,
    What are all the Standard Data targets & Data source for Warehouse management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • What are all the Standard Data targets&Data source for Transportation Manag

    Hi,
    What are all the Standard Data targets & Data source for Transportation Management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • Combine two date field into one timestamp field

    Hello all,
    I need help combining two date fields into one timestamp field.
    I have separate Date and Milliseconds fields and want to
    combine to one Timestamp field can some suggest sql???

    This is my data
    01 JAN 1989 12:01:00.001 AM
    this is my insert drag_time is a timestamp field in another schema
    INSERT
    INTO DRAG (drag_time)
    SELECT to_char(drag_time, 'DD MON YYYY HH12:MI:SS')||(drag_second)||to_char(drag_time, ' AM')
    FROM sa.drag;
    This is the error
    ERROR at line 3:
    ORA-01855: AM/A.M. or PM/P.M. required

  • Updating record that exist in master data target but not master data sourc

    HI,
    I have PLANT key value "0004" that exist in my master data target ZPLANT, but this value has never sended by my source system, it was added only when I loaded my Infoprovider.
    My problem is that  this key value "0004" haven't text, and I would like put automatiquely the text of another value '0005' for this value '0004'.
    I'm in BI7 for information.
    Do you have any idea please? ABAP, Start routine or End routine?
    Andcould you give me please the ABAP code to do that?
    Radj.

    Thank you for your answer, but the source system doesn't contain the value '0004'.
    Can'I add this value while loading ZPLANT master data from source system?
    If yes, How can'I do it, and How can I maitain (automatiquely not manually) the text of '0004' key value?
    PS:
    The text of '0004' key value is the same as the text of '0005' key value'.
    Thank you.
    Radj.
    Edited by: Radjech Radjech on Jul 26, 2009 8:53 AM

Maybe you are looking for