Combining iso files

I have some software that I downloaded and it came as 2 .iso files. I need to combine these into one iso file in order to mount and install. Any advice on how to do this would be helpful. Thanks.

I'm not 100% on this, but I thi nk you'll have to burn/mount them, then combine if needed.

Similar Messages

  • Download tool part of iso files?

    I have a 2 year old 640 gig dv7 laptop and I received the imminent "hard disk failure" message. So, I backed up the hard drive (8 dvds) and made recovery disks (6 dvds). I bought a new Seagate hard drive of 500 gigs and installed it. I then started the recovery process.
    I then received a message that said my new hard disk was smaller than the original and to not continue. I did try four different installs with no success, getting a blank screen except for the hp logo on the center of the screen and a press esc for menu.
    I have read the advice of trying the iso file download via either dvd or usb. My question is: the directions talk about using the w7 dvd/usb download tool. Is this download tool part of the iso files? How do I get it onto my computer first? I know it's probably simple, but it would be nice for me to get that clarified before doing the downloads.
    Thx.
    This question was solved.
    View Solution.

    Hi,
    As the error you're encountering is just due to the fact that Recovery Discs will not install correctly on a drive smaller than the one they were created on, I would just burn the correct ISO to a blank DVD and use this to perform the installation - there's no need to create a bootable USB drive unless you have a problem with the optical drive on your notebook.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found by entering your full Model No. or Product No. Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I use an ISO file on my Mac?

    From everything I have read online I should be able to mount an iso file using Disk  Utility or Disk Mounter Utility.  None of this works.  I continue to get the message that my file cannot be read.  A box comes up saying "File cannot be opened" and the "reason" is lited as being 'not recognized."  What do I do?  If anybody has any ideas I've love to heart them.  Thanks.

    Just a guess:
    I think an .inf file is a text script to install Windows software. So, you can READ the file, probably,  by dropping it on TextEdit. But to use it you would have to be running Windows on your MBP.
    http://www.fileinfo.com/extension/inf
    charlie

  • Encore cs4 creates invalid disc image (iso file)

    I have a video I edit in premiere cs4, exported an .mpg file that I import into encore to create a DVD. This works mostly fine (I have to delete the .xmp* file before importing to encore).
    Today I edited the video, re-encoded the mpg file using quality 5 and 2 pass vbr, and added a slide show (about 6 photos) to the encore project. It also builds fine to a disc image (iso file). But when I try to burn the iso file using windows 7, it tells me the iso image is invalid. I tried imgburn and got an  error message like this:
    session 1 track 1 MODE1 .... 2054
    dvd format: MODE1 .... 2048
    If I ask imgburn to continue it then says something about CSS and encryption, which I don't use, so I assume the iso file is too messed up.
    I burned a DVD5 directly from encore, and it works in a dvd player.
    Any idea why this invalid iso happens and whether there is a work-around?
    Since cs4 is not the latest version, I assume there is no hope of bug fix?

    There seem to be major problems in the disc creation process. I am struggling since several days now and I am not able to produce a working Blu-Ray Disk or iso image with Encore 5.5:
    - when producing Blu-Ray ISO images, you get an ISO that is recognized as DVD iso in all virtual drive programs. Therefore, you cann not burn them on a BD-R disc, also viewing them is not possible because it is a "DVD with blu-ray content".
    - when burning directly to disk, Encore does not close the sessing. This means, the Disk is not playable on all home Blue-Ray players. It was playable on my computer, but after closing the session manually the disc was a coaster.
    - when burning on a virtual burner (Virtual CD 10), the Blue-Ray plays ok on my computer, but I am NOT able to make a ISO image from this disk because some errors (unreadable blocks) on the disk are reported during creation and image creation stops.
    - from time to time (not reproduceable), Encore produces an additional AACS folder on the created Blu-Ray.
    I am an experienced user and dont have any issues with other software solutions, but with Encore I was not able to get any usable results so far.
    Win 7 x64 SP1

  • Creating a disc image from an iso file

    I have a samsung Bluray player that requires and update. I downloaded the file (which is a zip), then expanded it. It is an iso file. I need to create a disc image (not a simple burn to a cd) in order to update my samsung player. How do I do that? Disc Utility?

    Sorry, I should have been more clear. The ISO file is on my desktop. I didn't understand how to get it to show in DU, but when I hit BURN, a navigation window opens...thank you.

  • Coping iso file and mounting problem

    Hi
    I am using Windows 8.1 Update Enterprise 64 bit and Windows ADK.
    I noticed that, if I select the "Environment of the deployment tools and creations images" and I click on the "Run as Administrator" item of his Pop-Up menu and I mount on a iso image of windows 8.1 Update, when I run the command
    robocopy <Drive_Letter>:\"<Windows_Files_Path>" /e
    to copy all its files in a directory and the command
    dism /Mount-Image /ImageFile:"<Windows_Files_Path>"\install.wim /Index:<Image_Index> /MountDir:"<Mount_Directory_Path>"
    to mount an image volume, this error appears:
    Error: 0xc1510111
    Not have permission to mount and modify this image.
    However, if I copy these files through the "file explorer" window, the mounting of this volume image is working properly. How come?
    Thanks
    Bye
    Balubeto

    I am unable to reproduce the issue above:
    E:\>dism /mount-image /imagefile:e:\release\Captures.001\Win2008R2Sp1.wim /index:1 /mountdir:c:\mount
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    Mounting image
    [==========================100.0%==========================]
    The operation completed successfully.
    E:\>robocopy e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT e:\mount\test zti*.log /njh /ndl
    100% New File 226728 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIApplications.log
    100% New File 1228 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIApplyGPOPack.log
    100% New File 10283 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIAppVerify.log
    100% New File 29169 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIBackup.log
    100% New File 2101 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIBDE.log
    100% New File 36103 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIConfigure.log
    100% New File 34934 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDiskpart.log
    100% New File 1027 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDomainJoin.log
    100% New File 41428 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDrivers.log
    100% New File 93591 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIGather.log
    100% New File 2619 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIGroups.log
    100% New File 2898 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTINextPhase.log
    100% New File 3875 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIOSRole.log
    100% New File 740 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIOSRolePS.log
    100% New File 2350 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIPatches.log
    100% New File 4180 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ztiRunCommandHidden.log
    100% New File 1215 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTITatoo.log
    100% New File 1855 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIValidate.log
    100% New File 190933 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIWindowsUpdate.log
    100% New File 1436 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIWinRE.log
    100% New File 40631 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIYellowBang.log
    Total Copied Skipped Mismatch FAILED Extras
    Dirs : 1 0 0 0 0 0
    Files : 21 21 0 0 0 0
    Bytes : 712.2 k 712.2 k 0 0 0 0
    Times : 0:00:00 0:00:00 0:00:00 0:00:00
    Speed : 5209457 Bytes/sec.
    Speed : 298.087 MegaBytes/min.
    Ended : Tuesday, September 23, 2014 11:13:46 AM
    E:\>dism /unmount-wim /mountdir:c:\mount /commit
    Deployment Image Servicing and Management tool
    Version: 6.3.9600.17031
    Image File : e:\release\Captures.001\Win2008R2Sp1.wim
    Image Index : 1
    Saving image
    [==========================100.0%==========================]
    Unmounting image
    [==========================100.0%==========================]
    The operation completed successfully.
    Additionally I can see that the original question asked was copied from this post 2 years ago:
    http://www.eightforums.com/installation-setup/54246-coping-iso-file-mounting-problem.html
    is this really your problem?
    Really, this is not a MDT related question. perhaps a general Windows Setup forum would be a better place to ask this question.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • After I have combined some files together to make them into one pdf, can I add and take out files?

    After I have combined some files together to make them into one pdf, can I add and take out files?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

    Good day,
    I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
    When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

    Good day abrieb93050306,
    I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
    As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
    Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
    This will probably resolve your issue.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • How to create one ISO file large than 2G

    hi,
    here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
    mkisofs: File too large. cannot fwrite 32768*1
    Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
    See the detail logs information:
    <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
    mkisofs: The option '-L' is reserved by POSIX.1-2001.
    mkisofs: The option '-L' means 'follow all symbolic links'.
    mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
    mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
    mkisofs: The option '-P' is reserved by POSIX.1-2001.
    mkisofs: The option '-P' means 'do not follow symbolic links'.
    mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
    mkisofs: Use -publisher in future to get old mkisofs behavior.
    Warning: creating filesystem that does not conform to ISO-9660.
    mkisofs 2.01 (sparc-sun-solaris2.10)
    Scanning iso
    Scanning iso/rac_stage3
    Using RAC_S000 for /rac_stage2 (rac_stage1)
    Using RAC_S001 for /rac_stage1 (rac_stage3)
    Using INSTA000.1;1 for ..
    Writing: The File(s) Start Block 48
    0.42% done, estimate finish Thu Feb 1 16:12:35 2007
    0.84% done, estimate finish Thu Feb 1 16:12:36 2007
    1.26% done, estimate finish Thu Feb 1 16:12:36 2007
    1.69% done, estimate finish Thu Feb 1 16:12:36 2007
    2.11% done, estimate finish Thu Feb 1 16:12:36 2007
    �
    87.65% done, estimate finish Thu Feb 1 16:14:54 2007
    88.07% done, estimate finish Thu Feb 1 16:14:54 2007
    mkisofs: File too large. cannot fwrite 32768*1
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Thanks!

    does it matter "copy protection" ? for the problem that i have?
    my computer is alwyes get stuck while i trying to made a dvd or image
    i made few disks wite menu in the past & i had not problems at all

  • Hiding filenames when combining multiple files into a single .pdf

    I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
    -Ss

    Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
    If you want, I can send the file to you.

  • How do I find the .iso file from my windows 7 install disk?

    I am trying to install windows 7 on my new macbook air. I have a copy of windows7 install disk but as there is no cd drive I am having difficulty. I cannot figure out how to find the .iso file to put on a usb in order to install it.
    Can anyone help please?

    Welcome to the Apple Support Communities
    You can only get Windows 7 on a ISO file if you purchased Windows 7 from the Microsoft Store as a download, so this option isn't available for you.
    In your case, I recommend you to get an external optical drive (any external optical drive will work) and install Windows from the DVD. Doing this, you will save headaches

  • Creating an ISO file from FCP

    I have been asked something for the first time ever...to provide a TOS format DVD.  I have received this befire..but never created. What export steps do I take to make the DVD?
    Thanks

    You make an regular dvd using dvdstudiopro.  Once you do the build you need to create an iso image.
    Here's a link I found with a simple google for "creating an iso file on a mac"
    http://club.myce.com/f59/create-iso-image-mac-os-x-using-built-disk-utility-app- 200501/

  • Creating an ISO file from a bunch of BUP, IFO, VOB files

    Hi
    First, i want to apologize to all of you if my question is already answered somewhere, i did a search before.
    I have a bunch of BUP, IFO, VOB files (from an entire DVD) that i would like to burn into a single .ISO file.
    I am looking for the best software to do this. I would have used ImgBurn on my PC i guess... But with my iMac?
    Thanks a lot for your much appreciated help!
    Mopito

    Mopito wrote:
    if my question is already answered somewhere, i did a search before.
    Yes, the question has been answered before, several times.
    The only difference is that you want to create an ISO image, which usually means a raw disk image from another OS (eg, Win or Linux), although Mac OS X can attach or burn such an image.
    If you want to create a DVD-Video disc image, then you must use a tool specifically designed for it, if you want to use the image to create DVDs which will play in stand-alone DVD players. That's because such DVDs require a rigid disc layout.
    If you want to go commercial, you can use Toast or NTI DragonBurn. Otherwise, Burn, suggested by Alberto Ravasiomay also be a good solution (I'm not sure if it can save disc images, rather than burn them). Other solutions are
    DVD Image Utility
    <http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
    or, if you can handle the command line,
    mkisofs
    <http://cdrecord.berlios.de/private/cdrecord.html>
    (part of the cdrtools kit)
    You can also have a look at
    Disco
    <http://discoapp.com/>
    LiquidCD
    <http://www.maconnect.ch/>
    Both can burn DVD-Video; I'm not sure if they can save as a disc image.
    J D McIninch wrote:
    Start Disk Utility
    DU (or hdiutil) can create an ISO image, and, if it's used to burn to DVD, the disc can be played on computer DVD drives. But it will not play on most stand-alone DVD players, because of the layout issue I mentioned above. Hence, it's not a good idea to use it to create a DVD-Video disc image.

  • Can I OPEN an ISO file in Encore

    Cs4 Encore, I have created an ISO file a few months ago , can I open it in Encore and make changes to its authoring?

    No, and not even if you had a folder you built to.
    You can use one of the iso software drives to mount the iso and pull the individual files (the same result as if you burned the iso to disk and then copied files off it).  You can then try to pull the vobs into Encore, or rename and import, or convert.  This is not a terrible option if you have the menu files around and do not have the source video files.
    In my DVDIt days, I played with their "open DVD" (or somesuch) that allowed this.  It added another directory on the DVD and additional files, then allowed you to open that and edit.

  • Microsoft Do you have any shame???? What for that SDM is when it is not able to download anything or Produce ISO files?????

    Microsoft Do you have any shame???? What for that SDM is when it is not able to download anything or Produce ISO files????? You have wasted a lot of our precious time . . . Can't you fix a single problem . . . I am downloading windows 8.1 using your SDM
    but it gives errors while downloading , and when download completes 100% , it s not able to unpack and produce an ISO file from it . . . 

    Please see this post:
    http://social.msdn.microsoft.com/Forums/en-US/27085f1c-daf4-4ee3-99eb-5f1ac715d959/dreamspark-students-using-the-sdm-please-read?forum=msdnfeedback
    Moving to off topic.
    Thanks,
    Mike
    MSDN and TechNet Subscriptions Support

Maybe you are looking for