Combining More then one Slide Show

I have a slideshow I am creating with a 110 pictures. When I try to link the two slide shows the preview shows that they have been linked. After the final picture of the first slide it stops for a second and then transitions to the second slideshow and finishes up. When I burn it to a DVD and test it out on a DVD player for some reason it returns to the menu after the first slide show. What's going on? Or is there anything I should check?

Did you perhaps set an "Override" in the Properties of the button that starts the slideshow? It should be "Not Set".

Similar Messages

Can I export (burn) more than one slide show to the same DVD

Can I export (burn) more than one slide show I created in iPhoto to the same DVD, and if yes, how?

Yes. If you're using iDVD export the slideshow out of iPhoto at 480p size and drag it into an open iDVD menu window, being careful to avoid any drop zones. iDVD can handle up to 120 minutes of playing time (movies plus menus) on a single layer DVD disk.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Same button on more then one slide.

I have a clickbox on everyslide that runs an advanced action to show a caption and a button to close the caption. I have the caption on display for entire project and that works great. But The button does not show on anything but the first slide. How do I fix this?

Sorry, now I'm still more puzzled: in your first question you talk about "I have the caption on display for the entire project". So it is the same caption everywhere and has a unique ID.
Why do you complicate everything when it is so simple in Captivate 6:
Replace the image with click box by a shape (you can fill it with the image) that you configure as a button and use that for the advanced action; you display that shape button for the rest of the project and put it always on top (to avoid that it will be covered by anything)
Replace the button by another shape configured as button and displayed for the rest of the project, so it will have also one unique ID, triggers one simple action (close the caption with its unique ID).
A normal button, nor a click box can be displayed for the rest of the project, which is the case for the shape buttons. Moreover, maybe you can put them on a master slide as well.
Have a look at my blog posts, I'm most excited by this new feature in Captivate 6 much more than by all the other that are always talked about. This is the real timesaver:
http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6
http://lilybiri.posterous.com/toggle-shape-buttons
http://lilybiri.posterous.com/want-a-button-on-question-slide-in-captivate
Even presented a webinar focusing on shape buttons:
http://blogs.adobe.com/captivate/2012/09/training-lilybiris-favourite-shapes-to-trigger-ad vanced-actions.html
Lilybiri

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT1296 How can i get my contacts to show on itunes on my laptop? Or at least delete more then one at a time on my iphone 4s???

How can i delete more then one contact at a time on my iphone 4s or bring my contacts up on itunes on my laptop?? please help

No.
Iphone will sync with one and only one computer a a time. Syncing to another will erase the current content from the iphone and replace with content from the new computer.

Do I make more then one diagram in Multi layer design Diagrams?

Do you make more then one Diagrams for Multi layer diagrams?
develop the multi layer design. ?
So I had to make a SSD or sequence Diagram now we have to make a multi design diagram?
for the multi design. will we just be creating one big diagram of the assignment for this part?
or is it going to be a collection of a bunch of separate diagrams. as books shows a few of them? regarding layers?
For example create a diagram to cover all different layers/steps
So should be a collection of 3 or more diagrams for Part 3 of TMA3
do I have this correct?

Just click on "Buy" one at a time. If you do them all in one sitting, they will be grouped as a single charge on your credit card.
Some online music download stores have the ability to combine multiple miscellaneous tracks into a single zip file for purchase and download, but the iTunes Store does not work that way.

Is there a way to Search (List search) for more then one field text from a column for Bulk uploading?

I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
ex:
Column 1
Column 2
Date:
883851
MidWest
User input
8831518
MidWest
User input
On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc, would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.

I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
This can be done by setting the columns that contain repetitive information to Choice fields. In the configuration of the Choice field, check the box for "Allow custom values". Now as users are entering data into the list, the dropdown of options
for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Adding music to more than one slide and not the entire presentation

I love the way Keynote looks and behaves, but it fails to compete with PPT on certain aspects, such as adding the same audio track to more than one slide and NOT have it play for the entire presentation. Using PPT (and I hate PCs!) you can have a track play for "n" number of slides. I'm frustrated that I cannot do this with Keynote! I don't want the track as a soundtrack for the entire presentation. I want to add another audio track to, say, the last two or three slides only and something else for all the other slides. I looked through the user manual, forums, etc. and found that I can only add a soundtrack to the entire thing or a different audio to only one slide.
Question: What if I cut (that last two slides) and paste the the slides as a new Presentation with its own soundtrack, then reincorporate that back and paste it into the original presentation? Will that work or will the original soundtrack take over the entire presentation again?

Anyone remember Claris Works for Mac back in the early 90s? Now, that was a gem! What were they thinking when they got rid of that one (and replaced it with AppleWorks!)?
Good point, but one which Apple has heard a zillion times, and so sadly chosen to ignore. The really heartbroken among us remember AppleWorks from the mid-'80's, the world's first integrated suite, then ClarisWorks, then AppleWorks; and, of course, Beagle Bros. and BeagleWorks. But since we old f*s are dying off, those complaints will eventually stop. +Sic transit gloria mundi.+

SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

Tag_classifications more then one time in a web app

Hello everybody, I have a question about the tag classifications. I have a site with a breadcrumb and a titel. I want to have the title of the selected category in the breadcumb and titel. The tag classifications will do the job. But when I place the tag two times in the web app, the second it will show as {tag_classifications}. How can I have a category name more then one time on a web page?

In case it's useful, I figured out a javascript workaround for this...
I set the id of the div that has the first instance of {tag_classifications} to "classTag". Then I define a function that gets the contents of that div, puts it in a variable and then prints it out. Lastly, I call that function wherever I need more {tag_classifications} to appear.
Seems to be working for me. Hope this helps.
Adrian
1. My first instance of the tag goes like this - note the id of the div is set to "classTag"
<div id="classTag">{tag_classifications}</div>
2. I put this javascript function somewhere above where I need the second instance of the classifiactions tag.
<script type="text/javascript">
function getClassTag(){
var myClassTag = document.getElementById("classTag").innerHTML
document.write (myClassTag);
</script>
3. Where I need the second (or more) {tag_classifications} to appear, I put this instead:
<script type="text/javascript">getClassTag();</script>

More then one E-mail address per insurance provider

Hello to you all,
Does anyone have an Idea on how can I maintain more then one E-mail address per insurance provider?
In Tcode NG07/8/9 I am able to have only one which is not enough,
I would expect to have a multiple selection on that field like in customer master record Tcode FD01/2/3.
Regards,
Yoav

Dear Yoav,
In the Tcode NG07 only one mail id is given because from here you can send the files directly on clicking the mail icon. Because when you click on mail icon(adjacent to box) it shows whom you are sending the data, here you can also mark CC & BCC to the different users.
In Customer you are not mailing directly. If you have any query you can reply back.
Regards
Piyush

How to control when more then one ratiobutton active?

I used pnp LDB, in these i am created 6 radiobuttons.
Radiodutton 1 use : List Display
Radiodutton 2 use : Grid Display
Radiodutton 3 use : Paper Display
Radiodutton 4 use : Download
Radiodutton 5 use : Send Email
Radiodutton 6 use : Application Server
Here List & Grid display are working and remaining any one Radiobutton select and execute. It is show error i.e 'More then one radio button is active'.
How i can control it. Plese give me Idea about that.

Hi Thrimu,
Try to clear radio butttons in INITIALIZAATION event. So that, only one radio button will be active.
also, try to use AT-SELECTION SCREEN OUTPUT event.

Send messengers from More then one mail account...

Hi
I have more then one mail account in mail - one for private, one for work 1 and one for work 2. I want to avoid that I send a message via the wrong mail account to a person that I don't want to show that I have other mail accounts.
Is it possible to make some kind of rule that says if I send to [email protected] mail will only use mail account 1 and if I would like to send a message to [email protected] it will only use mail account 2?
I hope you understand my question
Best Lars Kudsk

It's not possible to set a rule based on recipient-since rules are only processed on incoming messages or at least those in your inbox..
You can set the default account in Mail preferences, beyond that, you just have to double check to make sure the correct account is selected.

Connect a PC more then one internet connections

Hi all members of JAVA forums.
I am a computer science student.I have two queries of network problem the first one is. If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.And the second question is.When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Please help me.tell me something about network hacking.

Ankitbill wrote:
If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.Rather than attempting to combine several smaller pipes just get one larger pipe.
When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Does your browser use prefetching?
tell me something about network hacking.[http://en.wikipedia.org/wiki/Hacker_%28programmer_subculture%29#Definition]
or
[http://en.wikipedia.org/wiki/Black_hat#Black_Hat_Hacker]?

Selecting more then one item in ITunes

Trying to clean up library and need to delete a number of files/items. I see that you can only command and click each individual file to select more then one but is there a easier way to do this? Want to be able to scroll over selection... then delete.
Also when you use option show duplicates this also shows the original as well as the duplicate? Is there a way to ONLY show the duplicate file. So that to would be easier to delete?
Thanks in advance.

Shift click to select multiple items from the iTunes window. Select one item then hold down the shift key and select the another item.
Show Duplicates will show both. iTunes doesn't know one from the other. No program does as far as I know. The Show Dups will show the dups - you have to decide which one is a dup. iTunes is showing you the tunes with the same names - the bit rate, kind, etc maybe different - you will need to decide which one to delete or rename.
MJ

Combining More then one Slide Show

Similar Messages

Maybe you are looking for