Combining multiple lists into a single list
Hi,
I have created 5 different lists within the same sharepoint site. These lists have some common fields among them for example each list has same fields such as "Country", "Unit", "Review Name" etc. I now want to create a single
list that will have show only the common fields present in each list. Could you please advise if this can be done and if so how?
Thanks, Aarti
To have a full fledged synchronization between 5 lists will be very complicated.
If the 6th list is a read-only / view only, I would recommend you to create Lists 1, 2,3,4 and 5 as a custom content type.
Then you can put a Content Query Web Part that filters out your custom content type and combines the content from the three lists.
or create a workflow to update the data when new item is added in other lists
Check the similar post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2480cdbe-acb4-434f-9866-cf716cad0994/combining-multiple-lists-into-a-single-list?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5a853466-7480-438a-b32d-3ad6d34347ef/combine-lists?forum=sharepointdevelopment
Similar Messages
-
Hiding filenames when combining multiple files into a single .pdf
I'm fairly new to this Acrobat X. I'm trying to assemble my portfolio to distribute to employers but I cannot seem to get rid/hide the filenames in the final pdf file. I was using the option to 'combine multiple files into a single pdf' because I was compiling images and documents to a single readable pdf file. I got all that done but once I open it, I'd see that each page would still contain the original file names rather than page numbers - which I prefer not to have employers see for the sake of tidiness (and I refuse to use the Adobe portfolio because it's not really efficient on space or design. I prefer a simple page-by-page pdf). So I was wondering if anyone can tell me how to hide my file names, change them into page numbers or getting rid of them all together so the 'Table of Contents' in the pdf preview mode would not show anything, I would really much appreciate it.
-SsWell, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
If you want, I can send the file to you. -
Problem in consolidating two list into a single list ! ! !
hi guys,
I have 3 list with each list containing many Object[] like,
List 1 = [ [1,aaa,bb], [2,bbb,xxx], [3,aaa,yyy], ]
List 2 = [ [2,bbb,xxx], [4,bbb,zzz]]
List 3 = [ [1,aaa,bb], [3,aaa,yyy],[5,ccc,www]]
Now i want to consolidate these list into a single list as below
List consolidated_list = [ [1,aaa,bb], [2,bbb,xxx], [3,aaa,yyy], [4,bbb,zzz],[5,ccc,www]]
I can do that by using nested looping statements. But i want to do that in a more optimized way.
Is there collection set/map that avoids the duplication in its objects.
How do that? Can anyone help in this issue??
--SubbuHi peter,
You are exactly correct. you got exactly what i need.
Now my doubt is there any readymade collection classes to acheive this without many iterations and looping statements.
--subbu -
Aggregating multiple lists into a single list.
I have a SharePoint site with several sub-sites, each with its own document library. I’ve created Site Columns and a Custom Content Type that is used by each library. I want to roll up all the documents with their associated metadata into a single list and
can’t figure out how to do it. I’ve tried using the Content Query and Content Search web parts, which do roll up the libraries, but I don’t get the display I want. I want to view the data as an aggregated list so all the list functions like filtering and creating
multiple views are available."I want to view the data as an aggregated list so all the list functions like filtering
and creating multiple views are available."
Unfortunately that is not possible. At-least not out of the box. If you do not want to use third party components then I think CQWP and CSWP is your best bet.
Amit -
Append or combine multiple IDOCs into a single IDOC file
Hi All,
We are implementing multiple new payment types that will generate IDOC files for us to send to the bank. To keep the cost to the minimum, the requirement is to combine multiple IDOCs to a single file.
I'd like to know the most efficient way to complete this task. Also, I am new to this forum, please let me know if I need to include additional information.
Your help will be deeply appreciated.
Thank you,
Joanne T.Hi Milind,
One way you can do this is generate each report in PDF or Postscript, and then use Adobe Acrobat Distiller to combine the files into one PDF document.
Regards,
Stewart -
Is there a way to combine multiple pages into a single document?
In the program "Pages," is there a way to combine multiple pages in a single document?
Jean Louis Gassee, who used to be a senior Apple executive, wrote on Apple's bad approach to the latest iWork suite:
https://discussions.apple.com/message/25209121#25209121
Peter -
Combining multiple files into a single PDF/A
The issue brought up in another discussion is the loss of PDF/A conformity when “merging” multiple PDF/A files into a single file (I use PDF/A for preservation of corporate records). The “insert” option retains conformity but does not allow inserting multiple files in a certain order, unless you insert them one by one (which is a pain when you have 50 files to attach).
The solutions I’ve come up with so far:
1) 1) In AAPro – combine files into a single PDF and then convert it to PDF/A using Preflight. This is easy, my only problem is that I don’t have AAPro (and AAStandard doesn’t convert to PDF/A).
2) 2) In AAStandard – combine files into a single PDF and then “print” to PDF/A. The problem of this “re-frying” is that it only creates PDF/A-1b (not 1a), bookmarks and OCR of scanned pages are lost, and files become significantly larger.
I wonder if anyone knows a more intelligent way around this problem, provided that I only have AAStandard. Thanks!Well, when the .pdf is in the final, deliverable form; I open it in Mac preview mode and the sidebar is always extended showing a 'table of contents' rather than having each document in the pdf file have a number designating a page name, it shows each individual filename the pdf is composed of. Not too sure about bookmark, though. Thanks for the reply!
If you want, I can send the file to you. -
Combining multiple records into a single record (View)
Okay so here is my scenerio:
There is a table I have made that details SQL jobs and the various details about them. What i wan't to do is make a view with specific logic implemented. Fields that will be taken across to this view will be: LastRunDate, LastRunTime and Step_Status.
JobName will also be used to define the logic but will not be a column in itself.
What i wan't is an additional column using this logic, called 'DataSet'. For each Dataset there are multiple jobs that are unique to it, so there are multiple records being brought over from the table to view for one particular dataset. For example,
for 'ExampleDataSet' there are three jobs, i wan't it so these jobs are combined and named as 'ExampleDataSet' under a calculated column called 'Dataset'. For the following fields i would like it so that LastRunDate and LastRunTime are the time in whichever
job was last to be intitiated is the date and time set. For Step_Status, there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running'. If neither are running yet one has failed then 'Failed'.
Only when all three have succeeded should it then be set to 'Succeeded'.
I hope i have made that clear enough, please feel free to ask any questions if not. I am relatively new to SQL but i thought to at least try least try (I knew it wouldn't work) and it didn't work. But it may give you a better idea of
what i wan't:
CREATE VIEW [dbo].[vw_DataAvailabilityAnalysts] AS
SELECT CASE
WHEN JobName in ('Job1','Job2','Job3') and step_status='Running' THEN 'Running'
WHEN JobName in ('Job1','Job2','Job3') and step_status='Failed' THEN 'Failed'
WHEN JobName in ('Job1','Job2','Job3) and step_status='Succeeded' THEN 'Succeeded'
END as StatusCheck,
CASE WHEN JobName in ('Job1','Job2','Job3') THEN 'ExampleDataSet'
END as DATASET,
LastRunDate,
lastruntime,
step_status,
FROM [CDS_Common].[dbo].[DataAvailability]
Many Thanks,
Plain_Clueless
Plain_CluelessOkay so here is what my table looks like (Simplified). There are four columns and the data within is extracted via a Stored Procedure.
JobName
LastRunDate
LastRunTime
Step_Status
Job1
11/06/2014
09:30:00
Succeeded
Job1
10/06/2014
09:37:20
Succeeded
Job2
11/06/2014
04:05:00
Succeeded
Job1
09/06/2014
02:17:41
Succeeded
As you can see there are 3 jobs which are all 'Job1'. This jobs are obviously different within the table however this represents that they are jobs which all update the same DataSet within our local warehouse. Whereas Job2 updates a different dataset alltogether.
I wan't to create a view which will alagmate the jobs that are of the same DataSet, which will disclude the column JobName but would create a whole new column that looks like this:
DataSet
LastRunDate
LastRunTime
Step_Status
DataSet2
11/06/2014
04:05:00
Succeeded
DataSet1
11/06/2014
09:30:00
Succeeded
Bascically what this shows you is all the Job 1's combined so they are one record, Amaglamated. The last time any of these jobs were run is the LastRunDate & LastRunTime, which was the first record in the first table provided. Again for Step_Status,
there are three possible results, 'Running', 'Failed' or 'Succeeded'. If any of the three jobs are 'Running', then 'Running' (Absolute). If none of the three jobs are running yet one has failed then 'Failed'. If one has failed yet another is also running then
'Running'.Only when all three have succeeded should it then be set to 'Succeeded'. (This last bit isn't as important).
Hope this clears it up a bit,
Plain_Clueless
Plain_Clueless -
Can I combine multiple entries into a single statement?
I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work. -
Combining multiple rows into a single row
Hi all,
I have a tricky situation in a HR select.
Imagine I have a dataset as below, simplified of course.
Name Start Date End date Job Title Salary
Tom 01/01/07 02/03/08 Gopher £500
Tom 03/03/08 jobsworth £600
Rick 04/05/09 Painter £500
Harry 02/06/07 02/06/08 Gardener £300
Harry 03/06/08 03/06/09 Runner £200
Harry 04/06/09 Cook £400
now, I need to select from above and return 3 rows so it looks as below
name start date enddate title salary start date enddate title salary start date enddate title salary etc etc
tom 01/01/07 02/03/08 gopher £500 03/03/08 blah 600
Rick 04/05/09 painter £500
harry etc etc etc
Now, I know how to select onto one row ok, asumming that each employee has a fixed number of roles but the problem is that each employee has a different number of jobs, one could have had 5 while another 50 and I do not know the maximum at this time.
Anyone have any ideas on how to appraoch this?
tia,
dw
Edited by: derrywriter on Oct 2, 2009 3:50 PM
Edited by: derrywriter on Oct 2, 2009 3:54 PMIdeally this should be done in a suitable reporting tool.
Standard SQL requires a deterministic number of columns to be known at parse time i.e. before the data is fetched it needs to know how many columns are being returned.
If you know there is a fixed maximum to the number of columns that can be returned you can use one of the various pivot methods (search the forum) which differ depending on whether you're using 9i, 10g or 11g database.
If you can't determine a maximum number of columns you're pretty much stuck, unless you want to write some clever interfacing to the oracle ODCI as demonstrated in this thread:
How to pipeline a function with a dynamic number of columns?
Personally, I believe such reporting styles should be reserved for reporting tools. -
To Combine Multiple STOu2019s into Single Delivery
Hi,
What are the configuration settings to be done to combine multiple STOu2019s into one single delivery in VL10B.
My requirement is to combine multiple STOu2019s contains different DELIVERY DATES and having SAME SUPPLYING AND RECEIVING PLANT into one single delivery.
Thanks & Regards,
Victor.Hi
Delivery in STO is created for single order and for same delivery date, same delivery no. for different delivery date and for multiple STO is not possible and its not logically correct,since after creation of delivery you will be doing picking and packing and Goods Issue.
Please check
Kishor -
When combine multiple PDFs into one, some letters are missing and display wrong letter
Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!
I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.
-
Combine multiple drawings into ONE SHEET
Hello, this is a question on Acrobat Pro, ver 8, using Windows XP. I guess I understand how to combine multiple files into a single PDF-file. However, this morning I happened to see the option mentioned in the subject line. When you go to "Combine files" > "Getting started with combined files" and select "CAD drawings" the description reads: "Combine multiple drawings into one sheet that's easy to navigate and print". How can this be done? I need to combine 8 ea CAD drawings (already converted to PDF) into ONE SHEET for printing without having the need taping 8 pieces of paper together. Arranging the drawing within the CAD application is not an option because the files were delivered by a 3rd party company and they only deliver PDFs
Hi Priya,
You can do this by merging the requets.
1. goto Se10 and right click on the request and seelct merge requests.
2. It will ask you from request and to request. Give the request names.
3. After merging first request contents will be added to second request and
first request will be deleted.
Like that you can merge 3 requests to one request.
Let me know if you want more info.
Thanks & Regards,
Siri. -
How is a distribution list created in 'Mail'? Every address I need to include is already in my 'Contacts', so how do I copy them into my single list?
In Contacts, add a new group, and then add all the desired recipients to the group.
Contacts – Create Mail Group -
How to display results set of multiple reports into a single report table
Our goal is to create a single report (or dashboard) that shows the "funnel" of object creations related to each campaign. The flow goes from Activity to Lead to Opportunity as well as multiple steps within each (ie. Unqualified Lead -> Qualified Lead, etc).
We currently have 3 separate reports in three different subject areas, each reporting the different metrics and we would like to combine the output into a single Unified report.
For example what we currently have is:
Activities:
Campaign Name # of Activities
Campaign A 12
Campaign B 26
Leads:
Campaign Name # of Leads # of Qualified Leads
Campaign A 10 4
Campaign B 20 18
Opportunities:
Campaign Name # of Opportunities # of Opps per Sales Stage ... # of Wins Closed Revenue
Campaign A 3 2 1 $1,000.00
Campaign B 10 8 3 $2,800.00
What we want to see is:
Combined:
Campaign Name - Campaign Cost - # of Activities - # of Leads - # of Qualified Leads - # of Opportunities - # of Opps per Sales Stage - # of Wins - Closed Revenue
Campaign A - $423.00 - 12 - 10 - 4 - 3 - 2 - 1 - $1,000.00
Campaign B - $ 1,000.00 - 26 - 20 - 18 - 10 - 8 - 3 - $2,800.00
We have tried using the "Combine with similar analysis" but the number of columns for each subject area differ. We also tried creating multiple UNION criteria (one for each column), but in the case of # of Opps per Sales Stage and Closed Revenue, those are not "Metrics" fields, so they won't combine.Hi, You may have to create some dummy fields to equate the no. of field in each of the report matching the data type too and get a one single report using combined analytics and then using the resultant data you can create a simple pivot like below. Haven't tried it before
-- Venky CRMIT
Hi Venky,
I am facing the same problem. Can you please say Steps how to create resultant data and Combine in pivot Table .
Please Help me .
Thanks in Advance .
My mail id is :
[email protected]
Maybe you are looking for
-
Is it possible to call a VI that is inside a LabVIEW executable from a TestStand sequence?
I have created a custom TestStand operator interface and have modified the default sequential process model to display a UUT information dialog that prompts for more information than just the UUT serial number. This UUT information dialog is a LabVI
-
Import from 9i to 8.1.6
how to import from 9i to 8.1.5
-
How can I get rid of malware flash player
how can I get rid of malware flash player (May 18,'13)
-
Get the wage type, amount and cost center
Dear Expert, Is there any FM to get the payroll result for each wage type, amount, and cost center allocation? Example, Employee Tom was in cost center A with wage type 1001 ($1000) in Jan. But in Feb payroll, we need to retro the cost center for emp
-
I also would like to know the faster way to do this, I tried to call the bank and according to them they don't know anything, so at this point I'm like who do I need to talk to about this great program? Nobody knows....please help thanks!!!