Combining multiple pages files into one file?

Sorry if this is a dumb question, but I really did try to find the answer both in the Pages documentation and the forums and couldn't find even a similar question!
I have a 90+ page document I created that contains many photo's, and other graphic elements. Because it was increasing incapacitating my computer, I decided to break the document up into separate files broken up by chapter. Now I have approximately 10 different Pages files that I would like to merge into 1 file, mainly to add page numbers. For the life of me, I do not see a simple way to combine these files into one. Can someone please help? Thank you in advance!
Craig

It's a common enough question that I saved my first response to such a question & modify & reuse it as needed. The problem with searching these forums/fora is guessing the exact word to use.
Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

Similar Messages

Is there a way to combine multiple tables/sheets into one file?

In Excel if add more than one sheet you have tabs at the bottom that you can click on and name. Does Numbers have something similar? I searched support and even googled the question but couldn't really find an answer. I appreicate any help!!!
Thanks!!

More a vocabulary issue than anything else, although the underlying models are somehwat different.
A Numbers document must have at least one Sheet, the large canvas on which other objects are placed.
Every Sheet starts with one Table on it. You can add several tables to a Sheet. Usually hese are (relatively) small, single purpose tables, typically used to perform calculations on the contents of the main table, to hold data used by the main table, to extract data from the main table for use in a Chart, or for other purposes. As each Table is added, its icon is added to the list, under the Sheet to which it was added. Tables can be moved to a different sheet by dragging their icons in the Sheets list. umbers aoutomatically updates all formulas to fit the new location.
Charts can be added to a Sheet by selectng the data to be graphed, then choosing the chart type from the Charts button in the Toolbar. An icon for each chart is added to the list (under its Sheet) as the chart is created.
When you add a Sheet to a Numbers document, that Sheet's icon appears in the Sheets list to the left of the working area (where the active Sheet and its contents are displayed). Charts can be moved to a differet Sheet by dragging their icons.
Other objects (Text boxes, graphics objects) can also be added to the Sheet. No icons appear for these.
The list of items for each Sheet can be collapsed (by clicking the disclosure triangle beside the Sheet name), hiding the Table and Chart names, and leaving only the Sheet name and icon showing in the Sheets list.
Only one sheet may be viewed at a time. To switch between sheets, click the icon of the Shhet to which you want to go, or click the icon of an item on that sheet to bring the sheet to the front with the clicked item on the screen.
For more detail, and a better introduction to Numbers, I'd recommend reading at least the first four chapters of the Numbers '09 User Guide, available through the Help menu in Numbers, or from this page.
Regards,
Barry

How can I combine multiple Pages documents into one using iPad?

Hello all,
I have created a magazine with my students using pages. The problem is that each article is a separate documents. Now I have to put them all together. How can I do that, using iPad? Is it even possible?
Thank you

copy paste is the only way to do it on a pad - document by document.

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

Combining separate PDF files into ONE file

I have scanned 43 separate pdf files and want to combine them into one document. I have tried to look up on the adobe site and they talk about finging the combine icon, but I cannot find it. How do I combine these separatly scanned PDF files into one file.
thank you

Hi there,
Another option available to you is to use the online service Adobe CreatePDF (after all, you are in the forum for Acrobat.com, www.acrobat.com, another online service from Adobe). With a Basic subscription you can create PDF files as well as combine multiple files into a single PDF. For more information, please see: http://createpdf.acrobat.com/pricing.html
I'd be happy to give you more information should you need it.
Kind regards,
Rebecca

How do I merge 2 pdf files into one file?

How do I merge 2 pdf files into one file?

I use PrimoPDF (free download) to create pdf files. To merge two docs/pdfs/etc., print the first to a new pdf using Primo. Close it, then print the second and save it to the same new pdf. Primo gives you the option to 'append' or 'overwrite' the original file. By using 'append', you are just adding it to the back of the existing file. You can do this repeatedly to resort or combine existing pages into a new pdf.
Also, I'm using Adobe Reader X.

How do i merge multipule pdf files into one file?

how do i merge multipule pdf files into one file?

One method:
Open Acrobat XI Pro - use this "click path":
File :: Create :: Combine Files into a Single File
Be well...

I want to merge mp3 files into one file so i can play a mix in i tunes without pauze

i want to merge mp3 files into one file so i can play a mix in i tunes without pauze

Audacity is what you need.
Obviously you need to create a new MP3 file of the combined songs and not delete the originals.
If your DJ-ing and/or just have too many songs to do that, then look at the free VirtualDJHome version, gives you a lot of control over your music playback.

Can anyone help? Need to collect 4 or more pdf-files into one file

Hi,
I regurarly need to mail pdf-files. I'm searching an app or program that can collect 4 or more different pdf-files into one file. So I don't need to send them all apart.
Can anyone help me out?
Thanx!
Theo

Open Preview, open the PDFs you want to combine, select View/Show Thumbnail, drag the PDFs, you want to combine to the first PDF, then Export as PDF.
Preview Help

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be

I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be appreciated. Thank you.

wouldnt it be easier if you could do something like this?
https://discussions.apple.com/thread/3392535

How to combine .wmv files into one file???

Hello Apple World,
Can someone tell me a software that will allow me to combine ".wmv" files into one? I have several files that I need to combine then add music to. VERY simple with several software packages frow Windows pc's, but I'm struggling with this since getting my first mac! PLEASE help.

Hi:
How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Matti says it better than any of us:
how/where you can join clips with Streamclip
Also MPEG Streamclip guide explains it.
MPEG Streamclip can join similar MPEG files: The joined files must have the same PIDs, the same start codes, and the same audio/video properties (that is, they must come from the same source or channel).
Using "Convert to MPEG" before joining the files can be helpful, because it changes PIDs and start codes to a default value. The preferred method to join streams is to Copy one stream in MPEG Streamclip, open another stream and Paste it there. This method checks that the joined streams indeed are compatible. Another method is to put the MPEGs in the same folder, and rename them so that they sort as desired in list view. Then select them via MPEG Streamclip's "File/Open Files..." dialog box (Shift- or Command-click to select multiple MPEGs). Then choose "Edit/Fix Timecode Breaks". After this MPEG Streamclip should report the combined length of all MPEGs (check the Log Window if you want to know whether any timecode breaks were found). Then choose "File/Convert to MPEG... or /Save As..." to save them in a single file. If the video transition between two files looks bad, you can use the Cut command to improve it. You can join very different and incompatible MPEGs with this latter method so the end result is not guaranteed to work.
MPEG Streamclip can also edit MPEG files. Just set In/Out points (with I/O keys), Cut unwanted material off and choose "File/Convert to MPEG...". You can also Cut/Copy selections to other parts of the same stream or open another compatible stream and Paste it there. Shift-dragging the playhead can also be used to define a selection. Option + arrow keys jump to the beginning/end or In/Out points. You can use the Trim-command to more closely see a part of the video before cutting, then choose Revert Trimming to see all material. JKL-keys can be used to enable fast forward or reverse playing. The scroll wheel works also; with the Option key it scrolls 1 second per click. See the manual for more details on how to jump in single frame, GOP, 1 second, 10 second or 1 minute chunks when searching a specific spot in the video.
Editing and trimming can be accurate only if In and Out are both on keyframes because MPEG Streamclip edits to the GOP, not to the frame. For DVD and (XS)VCD the maximum GOP size is PAL 15 and NTSC 18 frames, so the editing accuracy can be up to about 0.6 seconds. You can advance to the previous or next keyframe (i.e. I-frame, the beginning of each GOP or Group Of Pictures) with the Up/Down arrow keys -- you can also use the Edit/Go to Keyframe command to see where the In and Out points really are when editing (the In point is included in the selection, the Out point is not included). Shift + Up/Down arrow keys allow fine-tuning the selection to the GOP.
Sue

BPM: Multiple IDOC collect into one file

Hi
I have done collecting multiple IDOCs of same type into one file using BPM
I have used the following blog which is collecting different types of IDOCs.
IDOCs (Multiple Types) Collection in BPM
But i have done collecting of IDOCs which are same type.
Source side it is showing successful and its reaching to BPM also . But in target i am not getting any file. Could any one please help me how to check where exactly I am failing.
Thanks & Regards
Sowmya

Check whether the Outbound Status is successful or not in sxm_moni. Is there any message created from Integration Process to receiver File system.
Check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a22ce8-8e72-2b10-3fba-e9511c6f0b8b
Regards,
Prateek

In PSE8 I need to move some files into one file - how to do?

When I added some photos of a trip from my camera to my PSE8 Organizer instead of going in as one file by date loaded they went in under separate files names. Now I have a large amount of files and want to move them into one file. How do I make a new file that I can move them to and how do I move them? Do I do this in photoshop or do I do this in windows My Pictures. I am using Win7.

Can you give me a little more info please. When I click on the display button it shows some dropdown menus, what do I click on next? What left hand panel do you mean? I'm always nervous about clicking on things in PSE, it usually ends up changing everything around then I spend hours trying to get everything back to how it was. Thanks.

Combining Multiple XML Files into One File

Hey Everyone,
So I am creating a program that takes in a bunch of arrays and stores them into a single xml file. I am finding out that my lag time to add these arrays to an xml file is getting worse with each array I put into it. I am placing over 5000 arrays into this file. This isn't working how I wanted it to so I have decided I will have to make multiple arrays to be able to obtain all of my arrays without having to sit here all day. I would like to have a VI that will take all of these xml files and put them together into one xml file. Does anyone have any ideas how this could be done?
Thanks,
Dustin

We need to set a few groundrules for your data:
1. XML, maybe or maybe not LV schema
2. You will be generating multiple tests, in your example file it is always a 2D array with 2 rows and 1 column, is this for real or just an artifact of this example. I was suspecting that you would have multiple length arrays.
3. What is the timescale of your data taking? If I am doing a relatively short, easy to repeat test, I take my chances with failures and gather all the data and write it at the end. If it is a long, difficult measurement I tend to write in intervals (not necessarily every test, but typically every 5-10 minutes).
If your data is fixed size, like the example file, you can append your individual arrays into one large 2D array in a couple of different ways and write the single array to the XML file. This is more compact. If it is not the same size, I was suggesting that you append only the new XML text to the end of the file as you go along. At the end you finish up by writing the closing tag. If there is a problem before that, the XML file is not readable, but easily fixed by simply adding the closing tag. You can even get fancy by keeping track of the offset of the start of the closing tag and start overwriting the new XML+close tag at that point. This means the file is readable even during the intermediate steps, but you are not writing the whole thing.
I can help with an example or two once you specify the data requirements a little more.

Acrobat Professional 9 error merge multiple files into one file

In the same file I made the text boxes and then I have produced more than one file, I then tried to merge into a single file but the software copies the same pages of the first file.
Let me explain:
1) in the first file number 1 I have 3 pages, these pages I have text boxes and then I saved the file with no 2, then No. 3, then 4;
2) I took the first file and the file I downloaded in the last 2,3,4
3) I opened the software to control and I copied the file multiple times n. 1 just
4) so now I have to file a repeated 4 times in a single file.
What should I do to be merged into a single file as separate files?
Perhaps this warning is that you understand the problem, since I used the same page by giving it a different name just because I made some text boxes with different content, that is, the program identifies the file and then continues to quote the same as another copy the same file, then I should change the form field for each file. How should I proceed?
Of course I followed the instructions of the notice but the thing has not changed, all the files you copy the same.
I enclose a picture
[url=http://www.iouppo.com][img]http://www.iouppo.com/life/1103/2ad6981bf5a030b25ae3acdcaa723a4 5.jpg[/img][/url]

Sorry, this is the Adobe Connect support forum and not related to Acrobat. Suggest you re-post to the Adobe Acrobat forum for help with this question. Thank you.

Combining multiple pages files into one file?

Similar Messages

Maybe you are looking for