Combining multiple resolution/framerate videos in single sequence

I have video that is 960x720 (1.333), 23.976 fps that I want to put into a timeline, along with video that is 720x480 (0.9) 29.97. I want to make one sequence and be able to put both versions of the video onto one sequence/timeline. Is this possible? It seems as if the bigger challenge would be making the framerate match, i.e. the 29.97 video may play back slowly if I create the sequence as a 23.976 fps. Any thoughts? Any resources? Thanks!

with CS4, that's no problem at all. Premiere Pro handles the frame sizes and frame rates.
Make sure you have the 'scale to frame size' preference set correctly and you should be good to go.
You might check out this tutorial that I did some time ago on this subject:
http://tv.adobe.com/watch/adobe-beginner-classes-with-dennis-radeke/episode-15-the-incredi ble-playback-demo/

Similar Messages

How do i combine multiple pdf file into a single pdf file?

how do i combine multiple pdf files into a single pdf file?

The thread was started in early March and it's Mid-April, I know this very well. The OP of this thread posted a very common and simple question or maybe he/she would have resolved this. For an Adobe Acrobat user it's not at all difficult to combine multiple PDF files into one. But to combine PDF files full version of Adobe Acrobat is mainly required, otherwise PDF files can't be combined. For example, I'm using Adobe Acrobat 9 Pro. These simple steps are mainly required to combine PDF files:
Open Adobe Acrobat.
Click on Combine and click on Merge files into a single PDF.
A window will be appearing, click on Add Files and select the PDF files you want to combine.
Arrange the selected files in any order with the help of Move Up and Move Down button.
Now click on Combine File and the selected PDF files will be combined within a few seconds.
A new PDF file will be created. Click on Save As and name this new PDF file. Then, click on Save.
A new PDF file will be created and all the selected PDF files are combined in it. The steps shown above might be different in other versions of Adobe Acrobat. Other than this, some third-party PDF merge software are also available. Most of them are available with a demo version for free evaluation. I've heard much about SysInfoTools PDF Merge software on other forums and directories and it's demo version is freely available. One may check its demo version if Adobe Acrobat (full version) is not available.
Regards

How to combine multiple Unmanaged Solution to one single Managed solution

Hi,
How to combine multiple Unmanaged Solution to one single Managed solution.?
There were some other third party developer have kept things lik ein UAT there are 2 release solution and both are Managed Solution.
And in Production the changes are only deployed for release 1 and for the release 2 changes deployment needs to be done.
But when i import that second release Managed Solution from UAT to Production then i got number of elements missing but i have checked they are already there in Soolution.
I did some R&D on this but not much helpful.
I thought i require to convert Unmanaged Solution of Production environment to Managed first for first release and then needs to import Managed solution of UAT to Production for second release.
Is this the right way to overcome form this situation?
Any help and response would be really appreciated.
Thanks.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Hi,
You can prepare unmanaged solution by adding all the components from the default solution,which are there in the managed solution, If Customizatiable entity is true in the managed solution.

How can I combine multiple icloud calendars into a single published calendar?

I have several calendars in Ical where I map my activities and schedules. Like many I need several calendars to categorise events.
Now, I'd like others to see when I'm free and when I'm unavailable. For this, I'd need to find a way to copy multiple Icloud calendars into a single one for publishing - and the published calendar would also have to sync to any update I make in the original calendar.
Any way to make this happen? Any third party app? Tried a couple - they were outdated and / or cumbersome.
If only there was a "smart calendar" tool in Ical …

It worked - up to the crucial point: after combining icloud calendars into one "on the machine" calendar, the latter is ready for going public. But of course - this public calendar will only contain the .ics files and will not sync for updates from the icloud calendars.
And that's what I want.
If this problem is not possible to solve with the software available in the Mac - is there any known third party solution for this?
(Apple: "smart calendars" please!)

Can you combine multiple itunes accounts into a single one?

I set up separate itunes accounts for my (2) sons (8 & 10) because one had an iPod and the other had an iTouch.
They just got an iPad for X-mas (that they'll share) ... I want to set up the iCloud and create a "joint" account.
Is it possible to combine their multiple itunes acounts into a single account?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

Export multiple resolutions/formats/versions in single export preset

I would like to be able export multiple resolutions of a project at the same time into separate folders. I can kind of do this now by having multiple export presets and running each of them right after the other and then letting them export simultaneously. Even though the export preset has a folder name specified, I have to manually type in the unique project name into each export preset. Unfortunately this becomes a little bit cumbersome as I often use 3 or 4 export presets for each project, and I may be exporting multiple projects at the same time. Obviously it makes sense to just type the unique text once (or have it automatically read from metadata) to avoid typos and make it easier on me.
I think there are two parts to make this work. The first is using metadata to name the folder name (to ensure unique foldernames), and the second is to allow "export preset groups" that export multiple presets together.
Here is my scenario:
I have three export presets:
600px saves to subfolder "project 600px for web"
2400px saves to subfolder "project 2400px for print"
600px watermark saves to subfolder "project 600px watermark"
So I have to type the real project name, replacing "project" three times for each project. This information could be easily entered automatically because lightroom already has that metadata in the folder name, or collection name.
This could be entered for the folder name in the same way custom file naming is done with the Filename Template Editor.
Another option would be use the Custom Text field in the Filename Template Editor to manually enter the project name if it's not already in some metadata field.
All of this already works great with the file name options, it just needs to be applied to the folder name as well.
Once the folder naming is taken care of, just group multiple presets into a preset group, or allow to select multiple presets at once, and exporting multiple resolutions/formats/versions of a group of images is made easy.

Thanks Rob
Your export plugin does allow running multiple export presets in a single group, however it still doesn't address the folder naming issue. Using your tool, I can easily initiate my multiple presets in a single export, however I am stuck using the generic foldername that I specified in my original export preset. This means that after the export completes, I still have to rename the folders to the particular project name. I would save the time of typing the project name into lightroom, but then just have to repeat that same task later outside of lightroom. It also prevents me from exporting two projects at the same time (or one after the other) because both projects would end up in the same generically named folders.
That said it is a useful plugin that I will likely use under the specific scenarios where it does work.

Combine multiple sales order in a single delivery

Hi Experts,
As per standard SAP we have a facility to combine multiple sales order in one delivery if orders have same shipping point,ship to party & delivery date.
But we have a requirement that the orders should get combine in a delivery only when shippping point,ship to party,delivery date & pricing date are same for orders.
Please let me know is there is any standard config available or do we need to write any exits & so...
Please reply ASAP .

Hi,
I think this is not there in standard functionality.
In this case you need to go for user exit for delivery routine 101, include program FV50B101
Check delivery routine 101 in VOFM and with the help of your abap consultant this can be done.
Thanks,
Swamy H P

Combining multiple pdf pages into a single document

I realize this is probably an inappropriate request -- probably? almost certainly -- for this forum, but perhaps someone can refer me to another source for a solution.
I would like to combine several pages individually scanned to pdf format into a single pdf document. How do I do that? (I have only Adobe Reader. I do not have any applications for creating and editing pdf pages.)
Hope you'll forgive the inappropriate request, and thanks to anyone who can refer me to a more appropriate source.
Sincerely,
Eric Weir

I would like to combine several pages individually scanned to pdf format into a single pdf document. How do I do that?
You already have the application installed -- Preview. Whether the source files are single page or multipage documents, whether they are all on size/orientation or come in multiple dimensions/orientations, simply ...
1) Open each in a separate Preview window,
2) Open the "sidebar" for each window,
3) Drag one or more icon pages from any of the source Preview sidebar windows to your target Preview sidebar window,
4) Arrange the order of the pages in the target sidebar window as desired, and
5) Save resulting document under a new name using the "Save As..." File menu option.
ADDED: Oops! Too slow. Someone else beat me to it...

Combine multiple CSV files into a single multi-column CSV file

Hey Scripting Guy!
I have what is probably a simple issue, but I haven't been able to find the right answer.
I have 18 CSV files that each contain the same header and a single value as shown below:
"Sum"
"90"
These files are the results of SMTP traffic by domain.
All I want to do is to combine the 18 CSV files into a single file with the content of each file in a separate column, using the file name as the column header.
For example:
file1.csv
"Sum"
"90"
file2.csv
"Sum"
"325"
file2.csv
"Sum"
"3534"
The desired ouput is:
"file1.csv","file2.csv","file3.csv"
"Sum","Sum","Sum"
"90","325","3534"
I don't need to row of Sum's if it is easy to leave out. It would be even better if this could be put into an Excel spreadsheet.
Thanks for your help!

Can you post your script?
If you are not a technician and do not want to write a script then you should try hiring a consultant.
If you want to learn how to write a script then start here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
By the way...your request makes no logical or technical sense. What is the point of doing this? There is no relationship between these files.
¯\_(ツ)_/¯

Combining multiple plot data into a single graph.

This is my current data structure:
1D array of... (contains 6 plots, each with their own x and y arrays)
A cluster of two elements
1D array of I32
1D array of DBL
A cluster of two elements
2D array of DBL (y points for multiple plots)
1D array of I32 (x points for the multiple plots)
I need to combine these into something suitable for throwing at an XY-Graph. This operation will need to be done three times (for three different graphs), where only the 2D array of DBL is different for each graph (all three 2D arrays are located in the same cluster along with the shared 1D array). What is the best way of doing this?
The 1x6 array of clusters contains plots 0-5 for each graph. Is there a way to hide these plots from the graph's legend?
Never say "Oops." Always say "Ah, interesting!"

J.Mamakos wrote:
I need to combine these into something suitable for throwing at an XY-Graph. This operation will need to be done three times (for three different graphs), where only the 2D array of DBL is different for each graph (all three 2D arrays are located in the same cluster along with the shared 1D array). What is the best way of doing this?
Sorry - this was actually a bit wrong/incomplete.
Graph1 includes one 2D array of DBL against the 1D array of I32.
Graph2 includes elements 2-3 of the 1x6 array, and also one 2D array of DBL against the 1D array of I32.
Graph3 includes elements 4-5 of the 1x6 array, and also one 2D array of DBL against the 1D array of I32.
This is how I'm doing it at the moment, but am I missing a trick here? Is there a better way?
As for my question about hiding any plots (on the legend) that came from the 1x6 array, is this even posible?
Either that, or is it possible to hide a graph whilst leaving its legend showing?
Or can one show/hide a graph's label in run-time?
Never say "Oops." Always say "Ah, interesting!"

Is is possible to combine multiple page orientations in a single document (Pages '09 v4.1)?

I'm trying to write a document with differing page orientations (landscape, portrait) for individual pages. This has *LONG* been a feature in Word but I can't figure out how to do it in Pages '09. What am I missing?

I did search and did find that answer in the forums. However, using another application to manipulate the final product is not the solution in the native app that I am seeking. I want to be able to have the editable document open and see the layout on the differing pages while writing. I suppose you are correct and this is a personal opinion/desire for this feature. However, I do not think it is too much to expect if Apple wants people to be convinced to use their iWork suite instead of MS Office.

How can I combine multiple text files into a single, alphabetized list?

I have many, many lists of song titles. Each in its own textedit file. There is tons of overlap and duplication. I want to make a master list that has every song listed.
If I could somehow just merge them all and alphabetize the lines, I could manually get rid of duplicates fairly easily.
I have Tiger. Don't know if I have any application that would help. I probably don't want to buy an application, though, because I suspect I may not be able to stick with Tiger much longer.
I appreciate any tips you can give me.
Thanks a lot,
Bruce

Hi Bruce, Tex-Edit Plus for OS X...
http://www.tex-edit.com/
It can Merge files then Sort them easily, even has a remove duplicate lines script available.
If the version you get doesn't have the sort perchance, here's a link, put sort in the search scripts box, get the second one, Sort Selection...
http://dougscripts.com/texedit/

Combine multiple rows of table in single row

Hi Experts,
I have a table of below format.
MSDNID
WALL_BAL
WALL_DATE
123
34
06-Sep-13
123
56
07-Sep-13
123
78
08-Sep-13
123
65
09-Sep-13
123
34
10-Sep-13
123
87
11-Sep-13
Now I have to create a new table. which should contain unique MSDNID with WALL_BAL in different column .
Like below
MSDNID
DAY1_BAL
DAY2_BAL
DAY3_BAL
DAY4_BAL
DAY5_BAL
DAY6_BAL
123
87
34
65
78
56
34
How can I write a query for this?

in 10g , you can use something like
select MSDNID,
max(decode(WALL_DATE, '11-Sep-13', WALL_BAL, null) day_1_bal,
max(decode(WALL_DATE, '06-Sep-13', WALL_BAL, null) day_6_bal
from t
group by MSDNID;
But it only works if you have limited # of days.

Combining multiple files together to make single file

My Canon camcorder only does a movie file up to 2 GB, then it starts a new file. I have a speech and it made 3 files. When I put them back together, they are still not smooth, you can definitely tell whre one ends and the next begins. How can I out it back together as the whole thing?
Wayne

Wayne,
IIRC, Canon ships software with their cameras, to "stitch" those segmented files back together. I would investigate using that. Otherwise, you might need to do some precise Trimming to get things to look smooth. Check the disc that shipped with your camera.
Good luck,
Hunt

How do I combine multiple PDF using PHP on Linux

Hi,
I would like to know if there is an Adobe product that can combine multiple PDF's into a single document and works on Linux? We are developing an application using PHP on Linux that has to combine selected PDF's and would like to know if there is a tool with api's (or command line interface) to allow that.

Adobe licenses the PDF Library SDK for native developers on Linux platforms (as C code). They do not supply PHP tools.

Combining multiple resolution/framerate videos in single sequence

Similar Messages

Maybe you are looking for