Combining Objects into one object

I have just learned Live Cycle this past week without assistance and so far so good.  My question is, I am trying to create a single object from multiple objects that I can repeat and insert through a button using the Action Command.  Is there a way to turn the multiple objects grouped into one item.  When I go into Action Builder, I keep getting the same message - "Subfolder container not flowed" and "Subform configured to be repeatable".  Can anyone help?

Post the question in the forum for LiveCycle Designer?

Similar Messages

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • I have several pics of my new grandson throughout the year.  How do I combine them into one event

    I have several pics of my new grandson throughout the year.  How do I combine them into one event

    You can drag and drop photos from one Event to another. Or you can flag them and use the Events: Add Flagged photos to Select Event.
    However, why not use an Album for the job?

  • I have two different itunes music files on my computer.  How do I combine them into one file?

    I have two different itunes music files on my computer.  How do I combine them into one file?

    I don't think so. The only other ID I have is a developer id, and I didn't get that until several months after I got the phone. In addition purchases I made from the App Store onthe phone would sync up with It unes on the Mac meaning it would be the same id.
    However I looked at the AppStore on my phone while it was connected to the Mac with iTunes open, and now the balance has changed to the same as the others.

  • I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account?

    I seem to have at least two, and maybe four, iCloud accounts, across my iPhone, my iPad and my MacBook Pro. Can I combine them into one iCloud account? I have been able to log into what appears to be three of the four iCloud accounts I have. Two of them seem to be remarkably similar, and one appears to be only for my MacBook.I think I know which one my iPhone is backing up to, as I successfully restored from a back-up last week. The fourth iCloud account I can't access via password or security questions. Any advice would be much appreciated.
    Thanks.
    Cheers,
    Aaron
    Melbourne, Australia

    You cannot merge accounts.

  • I have multiple documents how can I combine them into one document?

    I have multiple document files in Pages. How can I combine them into one document?

    Menu > View > Page Thumbnails > click on the thumbnails > Copy/Paste into thumbnails of other document
    Peter

  • I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

    I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

    What is the title of the other bookmark folder that can not be deleted?
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Please report back soon.

  • TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

    After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

    See Pondini's  Transferring files from one User Account to another, for starters

  • Songs in my Itunes show up as separate folders.  How do I combine them into one album?

    Songs in my Itunes show up as separate folders.  How do I combine them into one album?

    Is this one of those CDs where the main artist asks their friend to sing a song with them?
    Such as, Slash's new album. Track 1 is "Slash Feat. Ian Astbury", track 2 is "Slash Feat. Ozzy Osbourne" and so on.
    To fix this, select all the tracks on that album, right-click > Get Info, and say YES to changing multiple items.
    Put "Slash" in the *Album Artist* field (for this example, of course).
    Make sure it is the *Album Artist* field, not the plain Artist field.

  • How do I combine PDFs into one document?

    I want to scan CD booklets for online digital storage. I have Pages and Preview, of course. I do not have Acrobat Professional.
    I have a large scanner and can make individual TIFs or PDFs of each spread. What would be the best way to combine these into one file?

    etresoft,
    Please don't read this as an actual reply to your post because it is not.
    But, since the thread is dealing with CUPS-PDF and I have been desperately seeking CUPS-PDF for a long time ever since I've got my brand new iMac only 5 days ago (5 days on a new iMac [which is not only new but is intel-based, and which I was forced to buy because my older PPC iMac G5 died of preternatural or some other causes] is an extremely long time on account of Snow Leopard, about which I am like a babe trying to start speaking for the first time) I found it more expedient to "reply" in order to get some help with CUPS-PDF from someone who knows.
    I've downloaded CUPS-PDF from "https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/wiki/Home" and installed it following the instructions included therein.
    The only instruction I could not follow is to pick "Generic postscript color printer"; I could pick  "Generic postscript printer" though.
    CUPS-PDF shows in the printer list.
    CUPS-PDF apparently prints as indicated by the progress bar.
    But, the print doesn't show anywhere on my computer:
    The output is not in /Users/Shared/CUPS-PDF in a folder with my user account's name.
    I did make an alias to this folder on my desktop but it only contains two folders: "my user name" and "SPOOL"
    The first folder had a "clone" of the download source page (which I deleted.)
    SPOOL has nothing in it.
    I've never had a problem using CUPS-PDF while on OS X 10.4.11, something I'll never be able to revert to.
    I'll be eternally grateful to you if you could help me with this issue but, on condition that you use a language as plain as English since my expertise with OS X, which was never as considerable as to be able to use terminal to any advantage, nor understanding terms such as sudos and the like, is now even diminished on account of the new OS I am forced to use from now on.
    Thank you so much for your help and excuse me for using this approach to ask for help.
    Best regards,
    Ruben

  • How do I combine Projects into one project?

    I like to make small projects while travelling and post on facebook. When home, I would like to combine them into one longer project for my Apple TV.
    Any suggestions would be greatly appreciated.
    Thanks,
    Skip

    you can copy (copy all) the clips from one project and paste them into another clip, but music and titles will not come with that. If you export one project as a .mov file and then reimport it into iMovie as suggested, that will easily work, but you wont be able to edit that movie's music or titles.
    rr

  • Saving combined PDFs into one new document?

    I know how to combine PDFs into one document using Preview, but I am not finding any way to save the resulting new document.  There is no "save as" any longer in Preview, and when I choose "save", it only saves the first document, not the whole collection of documents.
    There must be a way to do this!  There used to be, and it was easy as pie. 
    Can someone help, please?
    Mark Carlson

    Thank you.  I was able to conjure up "save as"--though why should you have to hold down the option key? Why isn't "save as" just there? Well, it doesn't really matter, since "save as" still only saves one of the documents in the combined bunch.
    But your second method of accessing it through Print worked just fine.
    Thanks so much!
    Mark

  • Combine VI into one VI

    I am new to labview. I created four individual VI. I want to combine them into one VI, not sub VI. It is like normal user interface,all in one page.like press one button,the corresponding details shows. But in the same VI and same page.
    Thanks in advance
    Solved!
    Go to Solution.

    Hi Feinimoshu,
    I think what you are trying to do is display your four VIs in a single front panel. For that you can have a main VI with a Sub Panel in its front panel and dynamically call your four VIs as required. You can view all your VIs in the same front panel in this way.
    Regards,
    Nitz
    (Give Kudos to Good Answers, Mark it as a Solution if your problem is Solved) 

  • Combine images into one image

    I have 13 small images 100x100, and I would like to combine them into one 1300x1300 image.  I have all the latest vision assistant and IMAQ software.  I can't figure out an easy way to do this using Labview?  Any help would be greatly appreciated.
    Kevin Baker

    I am not too familiar with IMAQ but have done LV image processing where you can use an array to represent the data (I think IMAQ uses some border pixels in their array to accomidate for image processing near image edges).  You can initialize a 700x700 array (use a numeric type which agrees with your image bit depth, then for each image use the replace array subset with the column/ row corresponding to the x,y location of the origin (upper left  corner) of each image to replace, the length of each subset is equal to the width and height (100 in this case) of the inserting image.  So for image 1 the replace subset would be:
    column = 300, length = 100, row =0, length 100.
    Repete this for all 13 images.  As for the IMAQ conversion I dont know the answer since I dont have a copy of IMAQ.
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Batch combine files into one illustrator document - how to open target document?

    I am making a script which will:
    1) Open a folder of Illustrator files
    2) Open each file in the folder (these files are called the source files)
    3) Select all the contents of the source file
    4) Copy the contents of the source file
    5) Paste these contents into a target file as a new layer
    6) Ensure the new layer has the same name as the old source file
    However, I don't know how to tell Illustrator where my target file is. How can I do this?
    Also, when I paste, how can I turn off paste rembers layers. (So the layers get pasted into the new layer that has the same name as the old document).
    Here is my code:
    // JavaScript Document
    //Set up vairaibles
    var destDoc, sourceDoc, sourceFolder;
    // Select the source folder.
    sourceFolder = Folder.selectDialog('Select the folder with Illustrator files that you want to mere into one', '~');
    // If a valid folder is selected
    if (sourceFolder != null) {
              files = new Array();
              // Get all files matching the pattern
              files = sourceFolder.getFiles();
              if (files.length > 0) {
                        // Get the destination to save the files
                        destDoc = document.selectDialog('Select the final saved document', '~');
                        for (i = 0; i < files.length; i++) {
                                  sourceDoc = app.open(files[i]); // returns the document object
                                  var myLayers = sourceDoc.layers; // All layers in Active Document
                                  //Go through all layers of source document and copy artwork
                                  for (i = 0; i < myLayers.length; i++) {
                                            myLayers[i].hasSelectedArtwork = true;
                                  with(sourceDoc) {
                                            var count = pageItems.length;
                                            for (var i = 0; i < count; i++) {
                                                      pageItems[i].selected = true;
                                            redraw();
                                            copy();
                                            for (var i = 0; i < count; i++) {
                                                      pageItems[i].selected = false;
                                  //Create a new title variable that has the title of the source document
                                  var title = sourceDoc.name;
                                  var title = title.substring(0, title.length - 4); //(remove extension from name)
                                  //Close the Source Document
                                  sourceDoc.close(SaveOptions.DONOTSAVECHANGES);
                                  //Open the Destination Document and create a new layer in it that is named after the title variation
                                  var newLayer = destDoc.layers.add();
                                  newLayer.name = title;
                                  //Paste into this new layer
                                  destDoc = app.paste();
              else {
                        alert('No matching files found');
    Thanks in advance for any help   
    Edit: Also, when pasting, how can I paste in place instead of just pasting.

    I have been studying this script. It is similar to what I need except it places the source files (Instead of copying & pasting them)
    http://kelsocartography.com/blog/?p=204
    I have adapted the script to my needs and it works perfectly, except it has the same problem as before: It pastes the first source file, but then it endlessly starts pasting the second source file (in a loop) and so I have to force quit.
    So my new question is, when looping through files how can you get illustrator to move on the next one?
    The original kelsocartography had this line:
    thisPlacedItem = newLayer.placedItems.add()
    thisPlacedItem.file = imageList[i];
    I belive this line is what makes Illustrator move onto the next file, but I am not sure how to adapt it to my code.
    Here is my code so far:
    function getFolder() {
              return Folder.selectDialog('Please select the folder to be imported:', Folder('~'));
    function importFolderAsLayers(selectedFolder) {
              // if a folder was selected continue with action, otherwise quit
              var myDocument;
              if (selectedFolder) {
                        myDocument = app.documents.add();
                        var firstImageLayer = true;
                        var newLayer;
                        var thisPlacedItem;
                        // create document list from files in selected folder
                        var documentList = selectedFolder.getFiles();
                        for (var i = 0; i < documentList.length; i++) {
                                  // open each document in file list
                                  if (documentList[i] instanceof File) {
                                            // get the file name
                                            var fName = documentList[i].name.toLowerCase();
                                            var sourceDoc = app.open(documentList[i]); // returns the document object
                                            var myLayers = sourceDoc.layers; // Select All layers in Active Document
                                            //Go through all layers of source document and copy artwork
                                            for (i = 0; i < myLayers.length; i++) {
                                                      myLayers[i].hasSelectedArtwork = true;
                                            with(sourceDoc) {
                                                      var count = pageItems.length;
                                                      for (var i = 0; i < count; i++) {
                                                                pageItems[i].selected = true;
                                                      redraw();
                                                      copy();
                                                      for (var i = 0; i < count; i++) {
                                                                pageItems[i].selected = false;
                                            //Create a new title variable that has the title of the source document
                                            var title = sourceDoc.name;
                                            var title = title.substring(0, title.length - 4); //(remove extension from name)
                                            //Close the Source Document
                                            // check for supported file formats
                                            if ((fName.indexOf(".eps") == -1)) {
                                                      continue;
                                            } else {
                                                      if (firstImageLayer) {
                                                                newLayer = myDocument.layers[0];
                                                                firstImageLayer = false;
                                                      } else {
                                                                newLayer = myDocument.layers.add();
                                                      // Give the layer the name of the image file
                                                      newLayer.name = fName.substring(0, fName.indexOf("."));
                                                      // Place the image on the artboard
                                                      sourceDoc.close(SaveOptions.DONOTSAVECHANGES);
                                                      //Paste into this new layer
                                                      newLayer = app.paste();
                        if (firstImageLayer) {
                                  // alert("The action has been cancelled.");
                                  // display error message if no supported documents were found in the designated folder
                                  alert("Sorry, but the designated folder does not contain any recognized image formats.\n\nPlease choose another folder.");
                                  myDocument.close();
                                  importFolderAsLayers(getFolder());
              } else {
                        // alert("The action has been cancelled.");
                        // display error message if no supported documents were found in the designated folder
                        alert("Rerun the script and choose a folder with images.");
                        //importFolderAsLayers(getFolder());
    // Start the script off
    importFolderAsLayers(getFolder());

  • A music album is listed multiple times in my library but each listing only has a few songs in it-not the full listing.  How can I combine them into one album and get rid of other duplicate listings?

    Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed.  How can I combine them to make one album?

    First....Thank you so much for your prompt reply.  I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved.  Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue!  I did as you suggested and all the songs list the same album when I go into each song's "get info".  However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album.  I am trying to consolidate them back into one album in my library.  I would greatly appreciate further assistance if you can.  Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this.  Thanks so much for your patience!
    SueZoo

Maybe you are looking for