Combining Projects environment With Demand Flow Technology

Hi,
I am working in the Projects environment with Discrete Jobs that include the project/task definitions.
One of our production lines is going to be converted to Flow Manufacturing, with PULL system and KANBAN (CARDS).
How can I work with Flow Manufacturing and combining the needs of project/task definitions ?
What is the oracle Application support for such thing ?
ofir.

There was a resolution to this posted on the forum that always worked for us. Go into the viewcontroller project properties and select the Dependencies node. Remove the dependency with the Model, then right click the struts diagram entry and select Goto Code. At that point, it should work.
Set this back later.
The other alternative would be to name/create the java class and then link it to the action inside the struts-config.xml via the source option tab on the struts config. Then you should be able to go in and edit from the picture.

Similar Messages

  • SSXA integration with web-flow technologies

    good morning
    Is it possible to integrate an application of SSXA with some technology to control the flow of web pages?
    I refer to technologies such as Spring Web Flow, ADF Task Flows or similar
    If it were possible, can you show me some blog or tutorial that explain how to do it?
    Thank you very much to all.

    Take a look at this article: http://www.yonaweb.be/webcenter_tutorial/using_content_presenter_templates

  • Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?

    Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project? 
    Everything else is same.  29.97, fps, 1920 x1080, Linear PCM, 48kHz, mono, .mov
    If not, could I add the logo animation after outputting to compressor using QuickTime 7?
    I'm re-wrapping footage from Canon XF100, which is why m2v1.  I like working this way to preserve original footage.
    I just had my logo animated and designer matched everything except the m2v1.  Providing ProRes 422 (HQ)
    Thank you for your thoughts.  I'd like to avoid changing my camera footage to Apple ProRes 422 (HQ).

    Hi Mary,
    I'm new to FCPX too!
    When creating a new project, if you click on Use Custom Settingsand then ckick on the Custom checkbox in Video Properties, you can specifyexactly what you want!
    If you need to change it after the project was craeted, I found that you can click and highlight on the project in the Project Library window, then go over to the "info" button . The Properties window will expand from the right side (above the "info" button . With Properties selected it will show you the present settings, if you need to change those settings, click on the icon of the WRENCH on the bottom of that dialog box (Properties). You can then change your settings.
    Good luck, and happy cutting!
    Jb (James)

  • Missing Links from "Project Marvel: Going with the Flow"

    Hi,
    inside the Article "Project Marvel: Going with the Flow"
    (http://otn.oracle.com/oramag/webcolumns/2003/techarticles/smith_project_marvel.html#sidebar1)
    are two links to the Listing 1 and 2:
    http://otn.oracle.com/listings/smith_project_marvel_L1.html
    http://otn.oracle.com/listings/smith_project_marvel_L2.html
    which are invalid.
    Where can I find these two Listings?
    Thanks a lot :-)

    Ops, my mistake :-)
    The links are inside the original document are working fine.
    Thanks for your help.

  • Project Templates with Enterprise Resources

    I'm using Project Server 2013 ( latets updates installed for both Client and Server)
    I've created a project template and attached this to a project type. My template has enterprise resources speciified. So far so good.
    Now I'm trying to create a project using this template and I'm getting some errors.  (See below)
    As soon as I remove the resources from my template the project creates fine.
    It looks like 'rsResourceCannotAddLocalWithSameNameAsEnterprise'  in the error below means that Project Server looks at the resource in the template and considers the resources in the template always to be a local resources. And of
    course the resource already exists in my enterprise resources and therefore the project creation fails.
    Datasets:
    ProjectDataSet
    Table ProjectResource
    Row:  RES_UID='0bb2c5b5-1716-e311-a1c1-005056992257' PROJ_UID='3121855b-f13b-e311-9f7f-005056991b52'
    Error rsResourceCannotAddLocalWithSameNameAsEnterprise (2058) - column
    RES_UID
    General
    Queue:
    GeneralQueueJobFailed (26000) - ProjectCreate.ProjectAddToMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='353d845c-f13b-e311-9f7f-005056991b52' JobUID='3a21855b-f13b-e311-9f7f-005056991b52' ComputerName='13fdabbe-0ac0-4cca-b382-49d1853aec73'
    GroupType='ProjectCreate' MessageType='ProjectAddToMessage' MessageId='1' Stage='' CorrelationUID='147f4f9c-ae30-b04b-aec7-382a52fa5fdf'. For more details, check the ULS logs on machine
    13fdabbe-0ac0-4cca-b382-49d1853aec73 for entries with JobUID
    3a21855b-f13b-e311-9f7f-005056991b52.
    My questions are:
    Are Enterprise Resources in templates supported?
    Is there a way around this? We're trying to make it easy to select a subset of the enterprise resources available.

    I have experienced this exact same thing and my situation is highly irregular. 
    This is with Project Server 2013.
    I had an EPT with a Project Schedule that had Generic Enterprise Resources assigned and was able to create new projects without problems using the EPT from the New button in the Project Centre in PWA.
    I was creating new projects to test and demonstrate Portfolio Analysis and was able to model Organisational Capacity represented by my Generic Resources and also the Surplus/Deficit element of Resource Constraints on a Portfolio. The Hired Resource Report
    was failing.
    A Service Pack and Cumulative update were applied to the Server and now I cannot create new projects using EPTs that have a project schedule with Generic Enterprise Resources assigned to tasks in the schedule.
    I checked the error message for the Failed and Blocking job in the queue and the GUIDs were for my Generic Enterprise Resources. I deleted the offending Generic Enterprise Resources and then re-created them anew, edited the Project Template to have
    these Generic Enterprise Resources on the Project Team and randomly assigned them to tasks in the schedule to generate a notional demand for work in the Project Template. I then Saved the Template in Project as a new Project Template and edited my EPT
    to reference this new Project Schedule. 
    Same error encountered again.
    Perversely I can open the Template schedule in Project Professional and do Save As and save it as a new project to the Server and that works just fine - the schedule is visible in the Project Centre and I can edit the schedule in both Project Pro and in
    PWA.
    My hunch is that the Cumulative Update and Service Pack which were applied to try and resolve the failing "Hired Resources Report" in Portfolio Analysis, which sadly it didn't resolve - has probably provoked this interesting challenge as it is
    the only material thing to change on the Server during the time that this issue has manifested itself.
    Am I the only one to encounter this?
    Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
    PM News Project Server Specialists
    Project Server PRIME | Twitter:
    @Twitter | Facebook:
    @Facebook | Linkedin:
    Wellingtone

  • Check settings combinations to achieve good Optical Flow HDV 50i -ProRes422

    Hi Guys
    RE: Motion 3, HDV 50i, standard ProRes 422, optical flow
    I'm trying to decide which combination of settings I should choose in order to ensure the highest possible standard of optical flow-treated video for a video clip which just features live people - no graphics.
    So far my results haven't been as 'smooth' as I would have liked. Below I have detailed my steps taken - if you could recommend which combination of 'lighting', 'field rendering', 'motion blur' or 'frame blending' I should choose I'd appreciate it.
    1. I captured my Canon XHA1 HDV 50i video via HDV - standard Prores 422
    2. I edited in FCP6 with standard Prores 422
    3. I sent a video clip to Motion 3, new project and chose Broadcast HD 1920 x 1080 25 fps field order Top (Upper First)
    4. I treated the video clip with optical flow to slow it down.
    5. Export as standard Apple ProRes 422 movie.
    Prior to exporting which of 'lighting', 'field rendering', 'motion blur' or 'frame blending' would anyone recommend please?
    For reference, in this forum David Bogie kindly stated the difference between the choices. I have included his post below. However I just want to be sure I'm making the correct choices, as I'm a bit confused about the '50i' (interlaced) aspect of my video footage.
    Here is David's post:
    "lighting
    field rendering
    motion blur
    frame blending"
    These are options you need to use when you know why you want to use them.
    If you have lights on in your scene, you want to render them. If you have no lights (and no camera) you do not need to activate lights. why does the switch exist at all? I render without lights for preview purposes.
    Fields are necessary for interlaced formats. You must know if your production format is progressive or interlaced.
    Motion blur enhances the illusion of movement by simulating image smear caused by an open shutter. You get the illusion at the expense of rendering time.
    Frame blending is only necessary if you have video clips in your scene and even then you don't need it unless you've changed the speed of the clip. Sort of. "
    Zak Peric also kindly posted, although I think his post relates more to graphics as opposed to interlaced video footage. Nonethless, here is his post:
    "Just use animation codec + alpha if you have alpha channel if not use animation codec millions of colours. This is the best codec for best quality. Also 4444 is a very good codec to use as it supports alpha channel but gives you smaller file sizes. Use always BEST from the render window, if you want additional motion blur then switch it on in render view. Be advised it takes much longer to render with motion blur on."
    Any tips would be really appreciated.
    Warm regards
    Peter

    Hi Mark
    Thanks for your kind prompt feedback.
    "You say you sent a clip to Motion, but then you say you chose project settings - I don't understand this. If you really "sent' a clip to Motion using Final Cut Pro's "Send to Motion" command, you don't need to set project settings - Motion automatically creates a project with settings that match the FCP sequence. "
    Okay I understand - sorry for any confusion caused - I had already used "Send to Motion" and applied Optical Flow to a clip which I then exported from Motion 3 as a Quicktime file. I was planning to repeat this process afresh, but am interested in which settings you could recommend from 'field rendering', 'motion blur' etc that might be applicable to my Optical Flow-analysed footage prior to exporting it as a Quicktime file.
    As regards exporting my Motion work as a separate Quicktime file, I prefer to do this so as to avoid the waiting for it to render in FCP.
    The already-optical-flow-analysed footage is actually pretty good (the original clips from FCP6 have already been stripped down to short durations to suit Optical Flow), but want to to double-check which of the 'field rendering', 'motion blur' etc combinations I should ideally choose to obtain best results, just in case I'm neglecting something that could otherwise make the quality even better?
    Once I finish this video project I'm on I'll definitely be going for a clean install of SL and FCS3.
    So, based on these choices...
    lighting
    field rendering
    motion blur
    frame blending
    ...I'm thinking that for my optical flow-treated video I won't need lighting, as it's mostly applicable to graphics.
    I don't have any graphics in these optical-flow video clips. It's just moving video footage of people.
    Am not sure about whether to choose Field Rendering (interlaced PAL 50i HDV - ProRes422 video).
    Am not sure whether to choose Motion Blur.
    Am not sure whether to choose Frame Blending.
    Any tips would be really appreciated, and thanks again for your valuable feedback.
    Peter

  • Eclipse as a development environment with Jakarta Tomcat - Need help!!

    Hello:
    Subject: Eclipse as a development environment with Jakarta Tomcat
    I am setting up the new development environment for my application (project). Below are the components involved::
    �     Eclipse 3.1
    �     myEclipse - EnterpriseWorkbenchInstaller_4.0GA_E3.1
    �     jakarta-tomcat-5.0.28 (Application Server)
    �     Sysdeo Eclipse Tomcat Launcher plugin - tomcatPluginV31beta
    �     SDK 1.4.2_08
    �     Microsoft XP sp2 operating system
    I have no issue with creation of project structure in eclipse IDE, compilation, and deployment, but there are some exception upon running the application.
    My project folder structure as follows:
    MyApplication/
    src/
    Conf/
    Web/
    classes
    taglib
    lib
    web.xml
    �     my application has few dependent projects, therefore I copied all the dependent projects final compiled classes (jars) to �lib� folder.
    �     I set all necessary classpath according to tomcat documentation.
    �     I created MyApplication.xml file under D:\jakarta-tomcat-5.0.28\conf\Catalina\localhost\ folder with the below context
    <Context path="/MyApplication " docBase="D:/xx/xxx/dev/src/ MyApplication/web" debug="0" reloadable="true" />
    �     I don�t get any exception during compilation and deployment process.
    �     I would greatly appreciate if you could give me a tips!!!!!!!!!!!!!!!!!!!!!!
    Error as follows:
    2005-10-10 17:31:45 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
    2005-10-10 17:31:47 StandardContext[jsp-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[jsp-examples]SessionListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]SessionListener: contextInitialized()
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Associated with Deployer 'localhost'
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Global resources are available
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: list: Listing contexts for virtual host 'localhost'
    2005-10-10 17:32:35 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
    java.lang.IllegalStateException: getOutputStream() has already been called for this response
         at org.apache.coyote.tomcat5.CoyoteResponse.getWriter(CoyoteResponse.java:599)
         at org.apache.coyote.tomcat5.CoyoteResponseFacade.getWriter(CoyoteResponseFacade.java:163)
         at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:122)
         at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:115)
         at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:190)
         at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115)
         at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)
         at org.apache.jsp.default_jsp._jspService(default_jsp.java:101)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    path setting as follows:
    %JAVA_HOME%\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Borland\AppServer\bin;C:\Program Files\CA\PEC\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\nls;%SystemRoot%\system32\nls\ENGLISH;C:\Program Files\Attachmate\E!E2K\;C:\Program Files\CA\AllFusion Harvest Change Manager;D:\jwsdp-1.1\jaxb-1.0\bin;D:\jwsdp-1.1\jwsdp-shared\bin;C:\Borland\classes12.zip;C:\Program Files\UltraEdit;D:\jakarta-tomcat-5.0.28\webapps\cst\WEB-INF\classes;D:\EPS\EB_CST_v3.7.2\dev\src\cst;%PATH%
    Classpath setting as follows:
    .;%third_pty%\xerces.jar;D:\EPS\EB_CST_v3.7.2\dev\src\cst;D:\jakarta-tomcat-5.0.28\webapps\cst;D:\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar;D:\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-ri.jar;%third_pty%\ant.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\dom.jar;D:\jwsdp-1.1\jwsdp-shared\lib\jax-qname.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-libs.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-xjc.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\jaxp-api.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\sax.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\xercesImpl.jar;%third_pty%\activation.jar;%third_pty%\ant-optional.jar;%third_pty%\j2ee.jar;%third_pty%\jakarta-regexp.jar;%third_pty%\jaxp.jar;%third_pty%\jcert.jar;%third_pty%\jnet.jar;%third_pty%\jsse.jar;%third_pty%\xalan.jar;C:\MSJDBSLib\msbase.jar;C:\MSJDBSLib\mssqlserver.jar;C:\MSJDBSLib\msutil.jar;
    Other IDE setting:
    As per tomcat documentation.

    Need tips to solve this issue!!!

  • Project working with Project Online in Office 365

    Hello,
    My question is related to project working and using Project Online to track projects.
    * Can I use a single "Project Online with Project Pro for Office 365" subscription for tracking and creating reports about all project sites and their tasks in Office 365?
    Meaning, if we have multiple projects designed in Project Pro and then uploaded directly to Office 365, can we gather the task, resource and progress information from these projects (created directly to Office 365) in a Project Online overview? One person
    using Project Online to oversee multiple projects, others uploading their projects and changing task information in Office 365 to a SharePoint site with Project Pro and Office 365 subscriptions.
    We want to have one person with Project Online overseeing the progress and create reports on all projects that have been uploaded to Office 365 (Project Portfolio Management), but not creating new projects. Is this possible with just one Project Online subscription?
    The other users would all have an Office 365 Enterprise 3/4 subscription for accessing Office 365, collaborating and updating their tasks. Project managers would have a Project Pro subscription for creating and uploading projects to Office 365.
    Thank you in advance.

    Helen,
    Your question is slightly confusing, so let me try and say it this way: 
    1) Your PMs (multiple) will use Project Pro, to create and publish plans to Project Online
    2) You will have one user who will 'administer' Project Online and create reports etc.,
    3) You will not have any other users access Project Online
    4) I am not sure about you 'SharePoint' comment--so excluding this.
    The problem is that, Project Pro+Office 365 does not necessarily give you access to Project Online. This combination is more useful when you are using just Project Pro or using project Pro to sync plans with Task lists on SharePoint Site. Plans that are
    uploaded this way will NOT appear in Project Online. So, the person who has the Project Online license will not have any data to report on.
    Having said that, here are few options:
    1) Stick with Project Pro +Office 365. Team Members can access "Task" lists in SharePoint Sites. In this scenario, Reporting will be somewhat complex, because each site is its own, and you might have to customize to be able to report across multiple sites. 
    2) If you want an easier Project Portfolio Management, Project Online is better. However, in this case, your PMs need to get Project Online with
    Project Pro for Office 365 which will allow them to publish plans to Project Online. Then your user with project Online license can generate reports for the portfolio easily. In this scenario, if you want team members to be able to submit timesheets,
    work with documents etc., you might want to look into getting the Project Lite for them (http://blogs.office.com/2014/03/31/project-lite-may-1st/)
    Hope it helps.
    Prasanna Adavi,PMP,MCTS,MCITP,MCT http://thinkepm.blogspot.com

  • Mixed application server environment with z/OS

    Hello,
    I'm looking for more information from SAP when running a system in a mixed application server platform environment.   In other words, the system would look like the following:
    1.  Central instance (only MS and EN processes -  i.e. standalone enqueue) running on AIX
    2.  Dialog instance (disp+work processes - i.e. spool, batch, dialog, upd) running on Windows 2003 or Linux
    3.  Database running on z/OS
    I see from the Product Available Matrix, that Windows and/or Linux are supported with z/OS, but there is no mention of running a mixed environment as described above.
    Any help/guidance would be appreciated.
    Regards,
    David

    Yes, we have already been down the road of zLinux. Thanks to some pricing issues on the DB2 z/OS side, we had to give up our IFLs and thus zLinux. Our application servers are now on Windows 2003 x64. Even when we were on zLinux, we were forced to run some Windows application servers for Adobe Document Services as this is not supported on zLinux and SAP/Adobe have thus far refused to port it.
    The inconsistency is that while SAP says it is "ok" to use something like SAMBA to share out SAPMNT and have it work under windows, it introduces unneeded complexity in many areas. SAP note 680617 describes this process. For us, it was a neverending headache with the unix vs windows text file format differences (supposedly handled by instance parameter abap/NTfmode=b) and there are complications for path names for batch jobs, etc.
    I am sure all of those issues can be sorted out eventually, but it is just much easier to stick with one application server platform.
    If you're considering zLinux, I would be extremely careful. There are only a handful of SAP customers in the world running it. Most likely you'll run into problems that no other customer has encountered yet and which will require a PTF or a new SAP kernel to fix (when you can finally get them). We ran into one such problem communicating to the ASCS/SCS in USS from zLinux over hipersockets. This really plagued our project team with hung locks (especially during LSMW imports of master data) until SAP released kernel 150 for zLinux which coded around the "unexpected" extreme low latency of hipersockets.
    Caveat emptor.
    Brian

  • Integrating with other view technologies

    Which of views technologies (instead JSP) I can integrate with JSF and is this very complicated? I can�t find any information about this. :(
    Please help me

    Thanx Vidyut
    But the problem is (or not :) ) that I have to do the comparison of Framework and one of the criteria in this project is using other view technologies (Velocity, FreeMarker, PDF, Excel , ........ and much more). And I would like to know if I can do such a think?
    So please help me :-)

  • How to cripple your XML DB environment with one statement

    The following COULD CRIPPLE YOUR ENVIRONMENT. It's just an example so you will be aware of the possibility...
    (Tested it on a VMware environment with Oracle Enterprise Edition 10.2.0.3.0 fresh installed, See also here: http://technology.amis.nl/blog/?p=1444)
    The following is executed under SYSTEM...
    SQL> conn system
    Connected.
    SQL> CREATE OR REPLACE TYPE XMLTYPE AS OBJECT
    2 (X INT
    3 )
    4 /
    Type created.
    SQL> CREATE TABLE XML_TEST
    2 (ID NUMBER(10,0) NOT NULL
    3 ,FAKE_XML XMLTYPE
    4 )
    5 /
    Table created.
    SQL> desc XML_TEST
    Name Null?
    Type
    ID NOT
    NULL NUMBER(10)
    FAKE_XML
    XMLTYPEOne would expect somehow that XMLTYPE would be a "preserved" word.
    Mark, if you see this post; what do you think?. I will test and create an SR for this, BUT are there other "types" which should be protected?
    Message was edited by:
    mgralike

    To show that it shouldn't be happening or it is at least inconsistent behavior, two examples one with "XMLTYPE" and one with "DATE"...
    SQL> CREATE OR REPLACE TYPE MYDATE AS OBJECT
      2  (X INT
      3  )
      4  /
    Type created.
    SQL> drop type mydate;
    Type dropped.
    SQL> CREATE OR REPLACE TYPE DATE AS OBJECT
      2  (X INT
      3  )
      4  /
    CREATE OR REPLACE TYPE DATE AS OBJECT
    ERROR at line 1:
    ORA-02302: invalid or missing type name
    SQL> CREATE OR REPLACE TYPE XMLTYPE AS OBJECT
      2  (X INT
      3  )
      4  /
    Type created.
    SQL> show user
    USER is "SYSTEM"Message was edited by:
    mgralike

  • CTM  with Inbound Quota..with demand and time split

    Hi Experts,
    I am trying to use two different quota figures for two different time periods( with no overlap).
    Product X at Loc1 is supplied by Vendor1 and Vendor2.
    Inbound Quota with Demand Split is used as given below:
    A) 1st Jan2011 to 31st Dec2012     Quota for Vendor1= 80   Quota for Vendor1= 20
    B) 1st Jan2013 to 31st Dec 2099    Quota for Vendor1= 50   Quota for Vendor1= 50
    But CTM considers it as given below.
    A) 1st Jan2011 to 31st Dec9999     Quota for Vendor1= 80   Quota for Vendor1= 20
    B) 1st Jan2013 to 31st Dec 9999    Quota for Vendor1= 50   Quota for Vendor1= 50
    I have two queries....Why CTM is not considering correct time period for Line A? Also why its taking end point as 31st Dec 9999 and not 31st Dec 2099?
    Will appeciate your opinion.
    Thanks

    Hi Sachin
    Thanks for the input.
    However, this does not solve the issue with decreasing time phased safety stock in combination with multiple demand priorities.
    If you run CTM with the settings you mentioned, it will respect the demand priorities, but builds up safety stock when the time phased safety stock is decreasing. (This is a release restriction). According to the documentation available, you should run CTM with the additional settings 'do not plan demand' and 'consider shortage' to overcome this. However, it does not repect the other demand priorities anymore. I tried multiple runs (with use of pegging, with different planning settings), but they all do not lead to the required result.
    Edited by: S. Geurds on Nov 17, 2008 1:57 PM

  • Saving clips and combining projects

    Good morning all,
    I am a newbie so please forgive me if the questions sounds simple but I am having problems finding an answer. I previously used GoPro Studio however I purchased a Canon camcorder and I can't edit the files in GoPro. What I would like to do in Premier Elements is save highlight clips and combine projects. I record basketball games and make a highlight video of each game and also would like to save highlight clips of each player that I can combine at the end of the season. So, I am having issues with two things. First, I am able to create a highlight video of each game with no issues. However, I would like to combine several projects(games) at the end of the season into one project. I can open a project but how can I add a project to an open project. My second question. When I am editing a game how can I take clips of each player and store them into each players folder so I can use for a project at the end of the year.
    Thank you!

    roberttm
    Please review and consider the following workflow which can be applied to sports and non sports events. It is not for just "high school" and has a wide range of applicability which can extend to slideshow media.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    There is a recent thread on this topic as it relates to sport events. I will give you the link so that you can follow that discussion and decide if any of the comments are of interest.
    How to Cut, Label, Save sports clips (40Hours, 500GB, 1080p AVCHD Source) for creating season highlight video in Premiere Elements 13?
    ATR

  • Can't Open Project Recovered With Data Rescue

    Hi All,
    Stupid me, I trashed a project file and emptied the Trash. I had forgotten that a FCP sequence was referencing the DV files contained in that project package. I had no backup of the DV files (please, no preaching - I learned my lesson).
    I was able to recover the project file with ProSoft's Data Rescue, but here's the rub:
    The original project was created with an earlier version of iMovie, and was reconverted later with iMovie 6 HD in the same folder. Data Rescue does not seem to recognize that it is a package type of file, thus option-clicking does not list Open Package Contents as an option. Double clicking the recovered project file results in iMovie 6 HD trying to convert the file from the older format, but since the package contents don't seem to be available, or arranged correctly, errors occur.
    iMovie 6 seems to know the names of the clips, but can't import them from the older format. I am certain the clips are there (there's only 2), given the project size is 17 GB, which looks about right. Thus I feel certain the clips are in there somewhere.
    Unfortunately, I no longer have the iMovie version that was used in the initial creation of the project. not that that would help anyway. Is there some way to recover the clips?

    Nevermind, the Thorough Search option in Data Rescue found the files I thought were gone for good .

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Maybe you are looking for