Combining Sections

I have a newsletter in progress and I'm learning Pages as I go. But I can't seem to figure this out, I wonder if someone can help?
In making the newsletter I created multiple section breaks in order to create new blank pages within which I could work, inserting images and text boxes up to this point in time. So I have seperate pages with images on them, each divided by a section break. I want now to paste text into the document so that it will flow onto the pages I've already layed out with images. But since they are divided by section breaks, of course I assumed for this to be possible I now need to delete the section breaks, thereby hoping to combine my image-laden pages into one big section, where the text can flow from one to another page as appropriate. The images are fixed to their pages, so I assumed they'd stay there. But instead what happens when I delete a section break, is that an entire page—with all its images—gets deleted too.
Why is this?
Is there some way I can do what I'm trying to do?
Or am I left only with the option of pasting parts of the text bit by bit onto each page, forever seperated from themselves under pain of deleting already formatted pages if I want to have it all linked together?
Thanks,
--Rhys

I think it would have been better to use page breaks rather than section breaks. I just did a quick experiment. I created a 4-page document by putting a section break on each page & then I put a graphic on each page. I then tried two different ways to change the section breaks to page breaks. The first worked, the second did not.
This is best done with invisibles turned on. Because I can't find how to enter a section or page break using the keyboard, I had to copy & paste. I selected the symbol for section break in my document, opened the Find window (⌘F) & pasted it into the Find: field. Back in my document, I added a page break to the end, copied (or cut) it & then pasted into the Replace: field in the Find box. I clicked Replace All & the section breaks became page breaks & the graphics stayed where they should.
I tried putting my cursor at the beginning of my document & inserted a page break. This added another page as I expected. I then forward-deleted the first section break. Unfortunately, this removed the page & its graphic.
Had you used page breaks in the beginning you would have what I got after my first experiment. Of course, adding text that will flow over pages will push page breaks down, but the graphics will stay put. Just delete the extra page breaks as needed.

Similar Messages

Finding in a Combined PDF file -- which PDF has each find

I have created a combined file of some 20 PDF files. I now wish to find text across this combined file. I find these as expected and all I see is the page number within the combined file. This is of no value to me. I would like to know how I display the individual PDF filename for each of my finds?

If you've combined pages into a single PDF then the concept of "the individual PDF filename" doesn't mean anything anymore. The combined sections don't know where they came from.

Conditional Chart Title

Is it possible to have part of the title of a chart be conditional? For example:
<Title text="Term: {STRM_DESCR}, Class: {SUBJECT_DESCR} {CATALOG_NBR}, Section: {CLASS_SECTION}, Course Title: {DU_CRSE_TITLE} Combined Section:{SCTN_CMBN_DESCR}" visible="true" horizontalAlignment="CENTER">
If the variable SCTN_CMBN_DESCR is blank or null, can the "Combined Section:" label that preceeds it be hidden?
Thanks.

First, it worked, and I thank you.
Not that I am complaining BUT ...
why doesn't the condition evaluate the region source query (below) and determine whether one row was returned.
select e.ename, e.empno, e.sal, d.deptno
from emp e, dept d
where e.deptno = d.deptno
and e.ename = :p1_ename
To be honest, I tried the EXISTS attribute in region condtion, but did not add the select statement you sugggested in Expression 1. My approach was not working and I figured I had it all wrong.
So, as instructed by your response, I set the condtion to EXISTS and added the folowing query in Expression 1 and it will conditionally display the region:
select 1 from emp e where e.ename = :p1_ename
Whyt does APEX make you put in two queries: one for the region source and one to evaluate whether the region should be conditional displayed?
I am sure there is a good reason and I am just curious.
Thanks again for your help.
Barry

Playback of regions on one track...can I choose?

After tracking into Logic, I often have multiple takes (regions) on one track. During the editing process I find the playback of multiple regions in one track quite confusing.
If all regions are unmuted, Logic usually plays the region that's been recorded most recently. Occasionally it doesn't, it just picks one in the middle. I'm sure there's a rhyme and reason to this but I can't figure it out. The manual seems to offer no help on the subject...
My question is - In a track with multiple regions recorded in the same time frame, is there a way for me to choose which regions I want to hear on play back?
My workaround has been to mute all the regions I don't want to hear (very time consuming!) or to cut and paste regions into one and crossfade edit them together. This usually works but say I have one region I'm using for the whole song, and I want to hear an overdubbed region for each chorus, the only way to do it is to cut up the main recording and splice in the choruses or to cut and mute the choruses I don't need.
This whole process would be soooo much easier if I could just make Logic realize that I want certain regions played at certain times. Anyone know of a way to do this?
Cheers
Powermac G5 Mac OS X (10.4.5) Logic Pro 7.1, Fireface 800
Powermac G5 Mac OS X (10.4.5) Logic Pro 7.1, Fireface 800

"Takes" is a valid recording term, it's just not a valid Logic concept - in other words, there is no such thing as a "take" in Logic.
Recording takes is a standard term. But looking for the "Next Take" keyboard shortcut is fruitless, as "take" is not any actual concept in Logic.
As far as the multitple tracks to one object, it's great for vocal comps. Let's say you have your vocal channel, with a bunch of plugins on it, compression, EQ, maybe reverb etc.
You can track in cycle mode, with each cycle pass putting the next take (see?) onto a new track, but still playing back through the vocal channel.
This way you can mute the channel, or mute/playback each different pass through, quickly comp a vocal from the different tracks and combine sections of them into your final comp, without having to select between different playlists - everything is visible and accessible on the arrange page, and you don't have to have multiple channels with the same plugins on, or resort to a bus.
There are a whole variety of positive workflow issues, which I'm not going to retype here - if these workflow issues don't suit you and you want to work in a different way, that's fine. For me, I absolutely love it and can comp in Logic quicker than any other app - in fact I'm usually (partially) comping on the fly, while recording, when the situation allows it...

Document Outline Not Converting As Expected

I have a word document with two levels of headings. The
Flashpaper options "Include Outline" is checked. The problem is,
Flashpaper is only including the first level heading, not the
second one. Also, when you click on one of the headings in the
flashpaper document, it links to a completely unrelated page in the
document.

I have resolved my Outline issues:
1. When I create the FlashPaper document using the FlashPaper
toolbar that is installed in Word, an outline is NOT created.
However when I create the FlashPaper document using the FlashPaper
menu command installed in Word, I DO get an outline (provided I
have selected the Include Outline checkbox in the Options dialog
box).
2. As for outline links going to the wrong location, after a
careful review of the Word document during which I replaced a page
break immediately followed by a section break with a single
combination section-page break, I was able to get the outline links
accurate.
My outline runs four levels deep.

Merge BQYs to a Single Dashboard

I am trying to create a dashboard on top of 2 different bqyfiles two different people made with the same tables. Is there away I can either merge the 2 bqy files so I can just put a singleintegrated dashboard in one place or is there a way I can create anew file with the dashboards in them and link it to the other twobqy files? Thanks So much!

The Dashboard Studio module of BI+ includes a Merge Utility that allows you to combine sections from two or more BQY files to create a single BQY file. <a target=_blank class=ftalternatingbarlinklarge href="http://dev.hyperion.com/products/s9_interactive_reporting/dashboard_studio_9.cfm">http://dev.hyperion.com/produc...ashboard_studio_9.cfm</a> If you have the Dashboard Development Services module, launch Dashboard Studio and click the Launch Merge button. If you want more information or instructions, you can send me an email on [email protected]

QT Movies

How can I take one movie that is in 4 sections and make it into one continuous movie. PC users have virtual dub but how do I do it on a mac.

githm wrote:
How can I take one movie that is in 4 sections and make it into one continuous movie. PC users have virtual dub but how do I do it on a mac.
(1) You can import the parts into iMovie and combine them there as you would edit any other video.
(2) Alternatively, here is how I do it in QuickTime:
(a) Get & install (if you do not already have) QT Pro: http://www.apple.com/quicktime/pro/
(b) Open all four sections.
(c) Make Section 2 the active file.
(d) Use the QuickTime Player > Edit > Select All menu command.
(e) Use the QuickTime Player > Edit > Copy menu command.
(f) Make Section 1 the active file.
(g) Drag the black insertion point marker to where you want to add Section 2.
(probably at the end of the Section 1 file.)
(h) Use the QuickTime Player > Edit > Paste menu command.
(i) Repeat for other sections.
(j) Save the newly combined Section 1 file before quitting QT Pro.
(I do not know whether or how clips can be combined in the new QT X.)
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.1) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.1)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Pages Spell Checking/ Profreading Problem

Hi,
I am working with several different documents,I am combining sections from various sources to create one new document. When I copy and paste information from one document to another the spell checking/proofreading function does not work on the new section pasted in. It works for the rest of the document, just not the new part.
Any ideas?
Thanks.

Question asked and responded many times.
The spell checker behavior is ruled by the language setting applying to the pieces of text.
Given what you describe, I assumes that some pieces of text are set as "use oneLanguage" and others ar set to "none".
You may check that in the Text Inspector, open the tab entitled "More" and look the setting of the menu item entitled "Language".
If you grabbed some pieces of text from .txt files or from files coming from windowLand, it's not surprising if they don't have a language defined.
Yvan KOENIG (from FRANCE mercredi 16 juillet 2008 20:56:12)

How to combine multiple Details section rows in my report

Hello,
I am currently creating a report which will display employee details, which includes first name, last name, home phone, cell phone and Email.
I get my First Name and Last name from the "Employees" table but all other info is situated in the "CommunicationLinks" table.
The tricky part which I am having issues with is the Home Phone, Cell Phone and Email are all under the same field in this table, the field is called "DisplayAs".
These 2 tables are linked together by taking Employees.LinkID and linking it to CommunicationLinks.LinkIDParent, which are matching linkids.
The only issue that I have, is for example, if you look at the screenshot provided, I have 5 details section that gets populated for the same employee.
How can I combine all these 5 records to only one?
The homephone, cellphone and email field have formulas created for them, the formula is as follow.
This example below is for the HomePhone field, the others have different type assigned to them
If {CommunicationLinks.Type} =1 then
{CommunicationLinks.DisplayAs}
else ""
Homephone, Cellphone and Email are all different types but uses the same field "DisplayAs".
I also tried creating a subreport for each of these fields but seems to give me the same results.
Any help would be really appreciated.
If you have any other questions please let me know. See attached screenshots for reference.
Thank you in advanced.
Jocelyn

Easier way without working in SQL:
1. Group by a field that is unique to the employee.
2. Suppress the employee group header and the details sections.
3. Create a couple of formulas:
{@ClearVariables}
WhilePrintingRecords;
StringVar HomePhone := "";
StringVar CellPhone :="";
StringVar Email := "";
Put this formula in the employee group header - even though the section is suppressed, it will evaluate.
{@SetVariables}
WhilePrintingRecords;
StringVar HomePhone;
StringVar CellPhone;
StringVar Email;
if {CommunicationLinks.Type} =1 then
HomePhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for cell> then
CellPhone := {CommunicationLinks.DisplayAs};
else if {CommunicationLinks.Type} = <type for email> then
Email := "";
Put this formula in the details section - it will evaluate even though the section is suppressed.
{@HomePhone}
WhilePrintingRecords;
StringVar HomePhone
(Do the same for Cell Phone and Email. Note that there is no semi-colon at the end of this one!)
Put these formulas and all of the rest of the employee data in one or more Employee group footer sections.
-Dell

Transaction code to check warehouse stock with storage section combination

Hello Gentalemen,
Is there any transaction code to check the warehouse stock with combination of storage section in Warehouse Management?
Please let me know.
Thanks

You can use LX02 or LX03. In the tool bar click the third button which will give you the dynamic inputs from LDB(click the storage bin drop down and click on storage section). You can provide the storage section there.
Kesav

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

Personalization to hide tabs on Asg section of Combined Per&Asg form

Hi
I have a requirement to hide several tabs on both the person form and the asg form of the Combined Per&Asg form in Oracle.
I am doing the same functionality for both - basically finding the tab and setting 'Displayed' to 'FALSE'.
For any tabs on the Person screen, this is working perfectly, however the personalizations are not taking effect in the Asg screen.
When I go into the Asg screen the tabs are still there as if the personalization hasn't fired.
If I then go into the personalization and click 'Apply' it hides the tab but obviously I can't have the users doing this.
Any ideas?
Thanks
Martin

Hi Martin,
May be the event that you select is really not firing.
Select HELP >> DIAGNOSTICS >> CUSTOM CODE >> SHOW CUSTOM EVENTS
this will show up the events that will fire with each action you take
use the one that fire in the moment you want to be the personalization event.
Regards
Hazem

How to combine web.config section encryption and the usage of WebConfigModification

Hi,
I have a question about encrypting web.config section that are shared across solutions which might use WebConfigModifications to change the SharePoint web.config.
Currently, I've embedded custom assemblies in my SharePoint solution. These assemblies read configuration items from the web.config so we need elements in the SharePoint web.config. We added those using the WebConfigModification class. No problem
so far.
Additionally, we want to encrypt specific sections, because they contain sensitive information. I tested this and encrypted the specific section. SharePoint still worked and my solution still worked. Still no problem so far.
However, when I deactivate features that need to remove entries from that specific encrypted configuration section, the entries are not removed. Also, when I activate features that need to add entries to that specific encrypted configuration section, the
entries are added within the section, but besides the encrypted content in that section. In the last case, SharePoint crashes complaining about invalid configuration. Makes sense, since entries exist twice (once encrypted, once unencrypted).
Now we can tackle this issue when it's about sections are specifically created for our application/assemblies, but what if this is about section that are also used by other assemblies/solutions, say "connectionStrings" or "appSettings".
Other SharePoint solutions might want to make changes to these sections as well using the WebConfigModification class. Those assemblies might not be able to deal with encrypted sections.
Is there a way to deal with this issue, to be able to encrypt these 'shared' sections without other solutions generating a bunch of errors and crashing?
Thanks in advance for any replies!
Cheers,
Ruud Hunnekens.

Hi Ruud Hunnekens,
From your description have you tried to first decrypt the section of the web.config file before removing the section nodes. In the feature activated event, add the section nodes and encrypt the section, then in the feature deactivated event, decrypted the
section, then delete the nodes, check whether this works.
Thanks,
Qiao Wei
TechNet Community Support

Is combining of attributes possible in add user by attribute section

The business users have identified when creating user groups they need to identify a specific set of users to
place in the user groups. The idea was to take custom attribute as a filtering
method. It appears that when using the "ADD BY ATTRIBUTE" feature in Ilearning
it treats the attributes with the condition of "OR" and not "AND" i.e ( see
supporting document) we two attributes city code and job code. We need to be
able for ilearning to say , include all users that have a city code 'X' AND and
job code 'Y'. Currently we are experiencing the application utilizing an OR
statment city code 'X' OR job code 'Y'.
Is this intended functionality?
If so is there a upgrade realease to include an AND statement?
Is there a current solution to this issue , if not has there been a proposed one or what have
other companies done as well?

User Group and Enrollment conditions currently only support OR conditions and this is intended functionality. There is an existing enhancement request to support AND functionality.
One typical workaround today is to create a single custom attribute that stores the combinations

Mod_jk in combination with mod_rewrite

My question is wtf doesn't this work?
I'm using apache 1.3.27 and jboss-3.0.4_tomcat-4.1.12
mod_jk works fine. I tried adding in mod_rewrite and now when I go to a page that gets rewritten, the mod_jk doesn't SEE the new URI. Instead, it still uses the old URI. IS THIS PROBLEM NOT FIXED IN TOMCAT-4.1.12?? That's the only explanation I can think of. I have tried putting mod_jk before mod_rewrite and vice-versa. Here's another question...... when people say to put mod_jk before mod_rewrite in the httpd.conf file, do they mean put the entire set of directives before, or just the LoadModule statement? I've tried several ways.
Anyway, here is my httpd.conf file. Any suggestions to get this far-more-painful-than-it-needs-to-be process working? Is it a Servlet 2.2 requirement that these configs be hard to use?
ServerTokens Prod
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/etc/httpd"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
LockFile /var/run/httpd.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /var/run/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/apache_runtime_status
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 8
MaxSpareServers 32
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 16
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 256
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 1000
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
#Listen 80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module modules/mod_foo.so
#LoadModule mmap_static_module modules/mod_mmap_static.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
<IfDefine HAVE_BANDWIDTH>
LoadModule bandwidth_module modules/mod_bandwidth.so
</IfDefine>
<IfDefine HAVE_THROTTLE>
LoadModule throttle_module modules/mod_throttle.so
</IfDefine>
#LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
#LoadModule agent_log_module modules/mod_log_agent.so
#LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
#LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule imap_module modules/mod_imap.so
#LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
# Thu 05 Jun 2003 10:12:02 AM PDT <[email protected]>
LoadModule jk_module /usr/local/lib/apache/mod_jk.so.ap1.3.27-eapi.rh72
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
LoadModule db_auth_module modules/mod_auth_db.so
#LoadModule auth_any_module modules/mod_auth_any.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule auth_ldap_module modules/mod_auth_ldap.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_pgsql_module modules/mod_auth_pgsql.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule proxy_module modules/libproxy.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
<IfDefine HAVE_PERL>
LoadModule perl_module modules/libperl.so
</IfDefine>
<IfDefine HAVE_PHP>
LoadModule php_module modules/mod_php.so
</IfDefine>
<IfDefine HAVE_PHP3>
LoadModule php3_module modules/libphp3.so
</IfDefine>
<IfDefine HAVE_PHP4>
LoadModule php4_module modules/libphp4.so
</IfDefine>
<IfDefine HAVE_DAV>
LoadModule dav_module modules/libdav.so
</IfDefine>
<IfDefine HAVE_ROAMING>
LoadModule roaming_module modules/mod_roaming.so
</IfDefine>
<IfDefine HAVE_SSL>
LoadModule ssl_module modules/libssl.so
</IfDefine>
<IfDefine HAVE_PUT>
LoadModule put_module modules/mod_put.so
</IfDefine>
<IfDefine HAVE_PYTHON>
LoadModule python_module modules/mod_python.so
</IfDefine>
# Thu 05 Jun 2003 10:12:02 AM PDT <[email protected]>
#Include /etc/httpd/conf/mod_jk.conf
<IfModule mod_jk.c>
JkWorkersFile /usr/local/jboss/server/default/conf/workers.properties
JkLogFile /var/tmp/jk.log
JkLogLevel warn
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13
JkMount /xml/servlet/* ajp13
</IfModule>
<IfModule mod_rewrite.c>
f
RewriteEngine on
RewriteLog /etc/httpd/logs/rewrite.log
RewriteLogLevel 1
RewriteRule ^/rwtest/(.*)$ /index.jsp [L]
</IfModule>
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
#AddModule mod_vhost_alias.c
<IfDefine HAVE_BANDWIDTH>
AddModule mod_bandwidth.c
</IfDefine>
<IfDefine HAVE_THROTTLE>
AddModule mod_throttle.c
</IfDefine>
#AddModule mod_env.c
AddModule mod_log_config.c
#AddModule mod_log_agent.c
#AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
#AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
#AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
#AddModule mod_cgi.c
#AddModule mod_asis.c
#AddModule mod_imap.c
#AddModule mod_actions.c
#AddModule mod_speling.c
#AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_jk.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
#AddModule mod_auth_any.c
#AddModule mod_auth_dbm.c
#AddModule auth_ldap.c
#AddModule mod_auth_mysql.c
#AddModule mod_auth_pgsql.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine HAVE_PERL>
AddModule mod_perl.c
</IfDefine>
<IfDefine HAVE_PHP>
AddModule mod_php.c
</IfDefine>
<IfDefine HAVE_PHP3>
AddModule mod_php3.c
</IfDefine>
<IfDefine HAVE_PHP4>
AddModule mod_php4.c
</IfDefine>
<IfDefine HAVE_DAV>
AddModule mod_dav.c
</IfDefine>
<IfDefine HAVE_ROAMING>
AddModule mod_roaming.c
</IfDefine>
<IfDefine HAVE_SSL>
AddModule mod_ssl.c
</IfDefine>
<IfDefine HAVE_PUT>
AddModule mod_put.c
</IfDefine>
<IfDefine HAVE_PYTHON>
AddModule mod_python.c
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
<IfDefine HAVE_SSL>
Listen 80
Listen 443
</IfDefine>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User apache
Group apache
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/usr/local/ourcompany/deploy/webroot"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/usr/local/ourcompany/deploy/webroot">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#<IfModule mod_userdir.c>
# UserDir public_html
#</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.jsp index.html index.htm index.shtml index.php index.php4 index.php3 index.phtml index.cgi
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /etc/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
# CustomLog /var/log/httpd/access_log common
#CustomLog logs/access_log combined
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
CustomLog "|/usr/sbin/cronolog -H /var/log/httpd/access /var/log/httpd/%Y/%m/access.%Y-%m-%d" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature EMail
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /clipart/ "/usr/local/ourcompany/data/clipart/"
<Directory "/usr/local/ourcompany/data/clipart">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /image_upload/ "/usr/local/ourcompany/data/labels/"
<Directory "/usr/local/ourcompany/data/labels">
Options MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
# Alias /manual/ "/etc/httpd/htdocs/manual/"
# <Directory "/etc/httpd/htdocs/manual">
# Options Indexes FollowSymlinks MultiViews
# AllowOverride None
# Order allow,deny
# Allow from all
# </Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing NameWidth=*
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/

Please note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right??

Combining Sections

Similar Messages

Maybe you are looking for