Combining two insert statements into one.

I am using Oracle 19 g Release 10.2.0.1.0
I have two dynamic complex queries running whose data looks similar to what i have loaded into current_tbl and past_tbl
create table current_tbl as select * from(
select '1' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '2' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '3' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '4' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '5' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '3' cast_key, '10' host_key, 'C' semester_cd from dual union all
select '4' cast_key, '10' host_key, 'C' semester_cd from dual union all
select '5' cast_key, '10' host_key, 'C' semester_cd from dual
create table past_tbl as
select * from(
select '1' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '4' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '5' cast_key, '10' host_key, 'T' semester_cd from dual union all
select '3' cast_key, '10' host_key, 'C' semester_cd from dual union all
select '4' cast_key, '10' host_key, 'C' semester_cd from dual union all
select '5' cast_key, '10' host_key, 'C' semester_cd from dual
) The process also dynamically builds insert statements into a temp_tbl, and runs in the loop for Semester_cd 'T' and Semester_cd = 'C', below are the queries it knows to run if its "T" or "C". The thing is it inserts duplicates. IS it possible to combine both the queires below and make a one insert statement.
I do not want to use delete statement since it will be loading millions of records on each insert. also do not want to use (cast_key,host_key......) not in (select cast_key,host_key.... from temp_tbl)...
Query 1
insert into temp_tbl
select *
from current_tbl a, (select cast_key, max(Decode(semester_cd,'T','T',NULL)) t_ind,
                            max(Decode(semester_cd,'C','C',NULL)) c_ind
                     from past_tbl
                     group by cast_key) b
where a.cast_key = b.cast_key(+)Query 2
insert into temp_tbl
select *
from current_tbl a, (select host_key, max(Decode(semester_cd,'T','T',NULL)) t_ind,
                            max(Decode(semester_cd,'C','C',NULL)) c_ind
                     from past_tbl
                     group by host_key) b
where a.host_key = b.host_key(+)Results it loads into each run of above query which loads duplicates
Results by Query 1
CAST_KEY    HOST_KEY    SEMESTER_CD    CAST_KEY_1    T_IND    C_IND
1           10              T               1           T   
2           10              T           
3           10              C               3                   C
3           10              T               3                   C
4           10              T               4           T       C
4           10              C               4           T       C
5           10              T               5           T       C
5           10              C               5           T       CResults by Query 2
CAST_KEY    HOST_KEY    SEMESTER_CD    HOST_KEY_1    T_IND    C_IND
1               10          T           10              T    C
2               10          T           10              T    C
3               10          C           10              T    C
3               10          T           10              T    C
4               10          C           10              T    C
4               10          T           10              T    C
5               10          C           10              T    C
5               10          T           10              T    CIs there a way to to combine to one insert statement.

If you just want to get rid of the duplicates (note that your sample results output doesn't appear to have any duplicate data), could you just UNION the two queries, i.e.
INSERT INTO temp_tbl( column_list )
  <<query 1>>
  UNION
  <<query 2>>Of course, since the UNION will be removing duplicates, it will add some expense to the query, probably equivalent to sorting the result.
Justin

Similar Messages

  • Combine two date field into one timestamp field

    Hello all,
    I need help combining two date fields into one timestamp field.
    I have separate Date and Milliseconds fields and want to
    combine to one Timestamp field can some suggest sql???

    This is my data
    01 JAN 1989 12:01:00.001 AM
    this is my insert drag_time is a timestamp field in another schema
    INSERT
    INTO DRAG (drag_time)
    SELECT to_char(drag_time, 'DD MON YYYY HH12:MI:SS')||(drag_second)||to_char(drag_time, ' AM')
    FROM sa.drag;
    This is the error
    ERROR at line 3:
    ORA-01855: AM/A.M. or PM/P.M. required

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • Reg: Combining two display lists into one list

    Dear All,
    i want to combine two display lists into one display list. Please give the idea for this one issue.
    *****************dispaly list 1 starting here*********************
    *&      Form  F_006_DISPLAY_LIST
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM F_006_DISPLAY_LIST.
    *  TABLES : LFA1 .
      DATA : V_DEBIT_TOTAL TYPE P DECIMALS 2 ,
             V_CREDIT_TOTAL TYPE P DECIMALS 2 ,
             V_CLOSE_BAL TYPE P DECIMALS 2 .
      DATA : V_CNT TYPE I .
      SORT ITAB_OPG BY LIFNR.
      LOOP AT ITAB_OPG.
        NEW-PAGE.
    * Displaying Vendor Name
        SELECT SINGLE NAME1 FROM LFA1 INTO LFA1-NAME1 WHERE
                                                 LIFNR EQ ITAB_OPG-LIFNR .
        FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
        WRITE:/2 'Vendor Code:' ,
                 ITAB_OPG-LIFNR  ,
              40 LFA1-NAME1 .
        CLEAR : LFA1 .
        WRITE :/(190) SY-ULINE .
    * Displaying Opening Balance
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
        READ TABLE ITAB_OPG WITH KEY LIFNR = ITAB_OPG-LIFNR .
        IF ITAB_OPG-BAL LE 0 .
          WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
                  171(18) ITAB_OPG-BAL .
        ELSE.
          WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
                  151(18) ITAB_OPG-BAL .
        ENDIF.
        WRITE :/(190) SY-ULINE .
    * Displaying Line Items
        LOOP AT ITAB_DISPLAY WHERE LIFNR EQ ITAB_OPG-LIFNR.
          V_CNT = SY-TABIX MOD 2.
          IF V_CNT EQ 0.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
          ELSE.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          ENDIF.
    * Selecting Bank Name and Cheque Number
          SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
                               FROM PAYR WHERE
                        ZBUKR EQ P_BUKRS AND
                        VBLNR EQ ITAB_DISPLAY-BELNR AND
                        LIFNR EQ ITAB_DISPLAY-LIFNR .
          SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
                 T012 WHERE BUKRS EQ P_BUKRS AND
                            HBKID EQ PAYR-HBKID.
          SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
                            BANKS EQ T012-BANKS AND
                            BANKL EQ T012-BANKL .
          WRITE :/2 ITAB_DISPLAY-BUDAT ,
                 14 ITAB_DISPLAY-BELNR ,
                 26 ITAB_DISPLAY-BLDAT ,
                 40 ITAB_DISPLAY-XBLNR ,
                 58(16) PAYR-CHECT ,
                 75 BNKA-BANKA ,
                105(40) ITAB_DISPLAY-SGTXT ,
                146(4) ITAB_DISPLAY-BLART .
    * Determinig Debit or Credit
          IF ITAB_DISPLAY-SHKZG EQ 'S'.
            V_DEBIT_TOTAL = V_DEBIT_TOTAL + ITAB_DISPLAY-DMBTR.
            WRITE:151(18)  ITAB_DISPLAY-DMBTR ,
                  171(18)  SPACE .
          ELSEIF ITAB_DISPLAY-SHKZG EQ 'H'.
            V_CREDIT_TOTAL = V_CREDIT_TOTAL + ITAB_DISPLAY-DMBTR.
            WRITE:151(18) SPACE ,
                  171(18)  ITAB_DISPLAY-DMBTR .
          ENDIF.
          CLEAR : T012 , BNKA , PAYR .
        ENDLOOP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/(190) SY-ULINE.
    * Displaying Debit and Credit Totals
        WRITE:/125 TEXT-001 ,
           151(18) V_DEBIT_TOTAL ,
           171(18) V_CREDIT_TOTAL .
        WRITE:/(190) SY-ULINE.
    * Displaying the Closing Balance
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        V_CLOSE_BAL = ITAB_OPG-BAL + V_DEBIT_TOTAL - V_CREDIT_TOTAL .
        IF V_CLOSE_BAL GT 0.
          WRITE:/122 TEXT-002 ,
             151(18) V_CLOSE_BAL NO-SIGN.  " D00K909674
        ELSEIF V_CLOSE_BAL LE 0.
          WRITE:/122 TEXT-002 ,
             171(18) V_CLOSE_BAL NO-SIGN.  " D00K909674
        ENDIF.
        CLEAR : V_CLOSE_BAL.
      ENDLOOP.
    ENDFORM.                               " F_006_DISPLAY_LIST
    *****************dispaly list 1 ending here*********************
    *****************dispaly list 2 starting here*********************
    *&      Form  F_006_DISPLAY_LIST1
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM F_006_DISPLAY_LIST1 .
    TABLES : KNA1 .
      DATA : V_DEBIT_TOTAL1 TYPE P DECIMALS 2 ,
             V_CREDIT_TOTAL1 TYPE P DECIMALS 2 ,
             V_CLOSE_BAL1 TYPE P DECIMALS 2 .
      DATA : V_CNT1 TYPE I .
      SORT ITAB_OPG1 BY KUNNR.
      LOOP AT ITAB_OPG1.
        NEW-PAGE.
    * Displaying Vendor Name
        SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1 WHERE
                                                 KUNNR EQ ITAB_OPG1-KUNNR .
        FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
        WRITE:/2 'Customer Code:' ,
                 ITAB_OPG1-KUNNR  ,
              40 KNA1-NAME1 .
        CLEAR : KNA1 .
        WRITE :/(190) SY-ULINE .
    * Displaying Opening Balance
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
        READ TABLE ITAB_OPG1 WITH KEY KUNNR = ITAB_OPG1-KUNNR .
        IF ITAB_OPG1-BAL1 LE 0 .
          WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
                  171(18) ITAB_OPG1-BAL1 .
        ELSE.
          WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
                  151(18) ITAB_OPG1-BAL1 .
        ENDIF.
        WRITE :/(190) SY-ULINE .
    * Displaying Line Items
        LOOP AT ITAB_DISPLAY1 WHERE KUNNR EQ ITAB_OPG1-KUNNR.
          V_CNT1 = SY-TABIX MOD 2.
          IF V_CNT1 EQ 0.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
          ELSE.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          ENDIF.
    * Selecting Bank Name and Cheque Number
          SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
                               FROM PAYR WHERE
                        ZBUKR EQ P_BUKRS AND
                        VBLNR EQ ITAB_DISPLAY1-BELNR AND
                        KUNNR EQ ITAB_DISPLAY1-KUNNR .
          SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
                 T012 WHERE BUKRS EQ P_BUKRS AND
                            HBKID EQ PAYR-HBKID.
          SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
                            BANKS EQ T012-BANKS AND
                            BANKL EQ T012-BANKL .
          WRITE :/2 ITAB_DISPLAY1-BUDAT ,
                 14 ITAB_DISPLAY1-BELNR ,
                 26 ITAB_DISPLAY1-BLDAT ,
                 40 ITAB_DISPLAY1-XBLNR ,
                 58(16) PAYR-CHECT ,
                 75 BNKA-BANKA ,
                105(40) ITAB_DISPLAY1-SGTXT ,
                146(4) ITAB_DISPLAY1-BLART .
    * Determinig Debit or Credit
          IF ITAB_DISPLAY1-SHKZG EQ 'S'.
            V_DEBIT_TOTAL1 = V_DEBIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
            WRITE:151(18)  ITAB_DISPLAY1-DMBTR ,
                  171(18)  SPACE .
          ELSEIF ITAB_DISPLAY1-SHKZG EQ 'H'.
            V_CREDIT_TOTAL1 = V_CREDIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
            WRITE:151(18) SPACE ,
                  171(18)  ITAB_DISPLAY1-DMBTR .
          ENDIF.
          CLEAR : T012 , BNKA , PAYR .
        ENDLOOP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/(190) SY-ULINE.
    * Displaying Debit and Credit Totals
        WRITE:/125 TEXT-001 ,
           151(18) V_DEBIT_TOTAL1,
           171(18) V_CREDIT_TOTAL1 .
        WRITE:/(190) SY-ULINE.
    * Displaying the Closing Balance
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        V_CLOSE_BAL1 = ITAB_OPG1-BAL1 + V_DEBIT_TOTAL1 - V_CREDIT_TOTAL1 .
        IF V_CLOSE_BAL1 GT 0.
          WRITE:/122 TEXT-002 ,
             151(18) V_CLOSE_BAL1 NO-SIGN.  " D00K909674
        ELSEIF V_CLOSE_BAL1 LE 0.
          WRITE:/122 TEXT-002 ,
             171(18) V_CLOSE_BAL1 NO-SIGN.  " D00K909674
        ENDIF.
        CLEAR : V_CLOSE_BAL1.
      ENDLOOP.
    ENDFORM.                    " F_006_DISPLAY_LIST1
    *****************dispaly list 2 ending here*********************
    Thanks,
    Sankar M

    Hi,
    Can you post it as two halves ?
    Regards,
    Swarna Munukoti

  • How do I combine two slide shows into one?

    I need to combine two slide shows into one and put the whole thing into a loop for a Kiosque. Can someone help?

    Drag and drop the slides from the Thumbnail viewer (left side of the window) from one Keynote to the other. They should copy with all the Actions and Transitions still in place. Then go to Inspector>Document Tab and check the box that says to Loop slideshow.

  • Combining two sales documents  into one billing document

    Hi Friends,
    I need to combine two sales document into one billing document. Header data is same in both sales document.
    I have set factory calendar in the payer master.
    Tried for data transfer rotine at copy control of item level. But was not sure which routine to be set.
    Please let me know, what all settings are required to create one combine billing document.
    Regards
    Suman

    Hi,
    Is it delivery based billing or order based billing?
    2 orders / 2 deliveries and 1 invoice.
    For the above situation you need to write a routine which eliminates document number difference for Reference and Allocation.
    If you do not have different customer purchase orders for these two sales orders and in your copy control from delivery to billing your assignment and reference numbers are blank then system will club these deliveries and create one sales order.
    Else you need to eliminate these by writing a copy control routine and assign it at the header level.
    Hope this helps.  Pl. revert in case of further clarifications.
    Thanks
    Krishna.

  • Search view : Combine two search views into one serch view

    Hi ,
    We have a requirement for combining two search views into one and display single result view consisting of some fields from One search and few fields from other search.
    Ex. There are two seperate search views for Oppotunity and Quotation. Now we want to combine search views of both into one search view with selected fields and then display a single result view with combined fields from both result views .
    Kindly suggest me the steps I can follow to achieve the same.
    Thanks,
    Madhura

    Hi,
    This is possible by creating dynamic views in a window.
    1)create views you required.
    2)create a tray in the view 1 and a link and set the properties.
    3)create an outbound plug for the view1 and save the application.
    4)create one more link in the tray for view1 and set the properties and create one more outbound plug.
    5)go the main view view and create 2nd tray and create a UI container element in it.
    6) now embed view1 and view2 in the container .........................
    <removed_by_moderator>
    regards,
    Muralidhar .C
    Edited by: Stephen Johannes on Jan 26, 2010 7:53 AM

  • Is it possible to combine two pivot report into one ?..

    Is it possible to combine two pivot report into one ?..
    Then trying to display a chart or table result.

    Thanks for the reply.
    Let me explain it briefly. I am creating a Report 1 based on one fitler condition and second report is created based on second filter condition.
    I have similar column (time periods) in the both report. Then measure column has to combine and show as single report.
    This is my requirement.

  • How do I combine two PDF files into one?

    I want to merge two PDF files into one to make things easier when I take the file(s) to a professional printer.
    Can I do this in Preview?
    Thanks.

    You can't do in Preview.
    You can combine individual PDFs into one PDF using one of these freeware utilities.
    PDFMergeX @ http://www.malcom-mac.com/blog/pdfmergex/
    joinPDF @ http://www.macupdate.com/info.php/id/16604
    Combine PDFs @ http://www.monkeybreadsoftware.de/Freeware/CombinePDFs.shtml>
    PDFLab (join & split) @ http://pdflab.en.softonic.com/mac
     Cheers, Tom

  • How do I combine two different libraries into one?

    I have three devices, one iphone and two ipods. How can I combine all three libraries into one single library. Is this possible?

    Choose the library connected to the iPhone, import the media content from the other one/two libraries. DeDupe.
    I've written a script called DeDuper which can help with the last bit. See this  thread for background.
    tt2

  • How do i combine two user accounts into one

    how do i combine two user accounts into one

    Drag one account's home folder from the Users folder to the other account's desktop, provide your administrator password, and then move your files from it.
    (75344)

  • Combine two select statements in one SQL statements

    I have the following two queries that I need to combine into one query, where it updates a single row at the same time.
    SELECT count(*) FROM database.USAGE WHERE SERVICE_TYPE = 'C' AND ACCOUNT = "4837"
    SELECT sum(minutes) FROM database.USAGE WHERE SERVICE_TYPE = 'DA' AND ACCOUNT = "4837"
    I want to insert the values of each select statement into two columns of the same row, as well as insert the account number from the select statement.
    After the query has been executed, the database row will look like this:
    ACCOUNT COUNT SUM
    4837 354 1039202
    I am looking for suggestions on how to:
    - either combine the two into one query
    - simply update each column with the value from each query by updating the row with the account value
    I am a SQL newbie - so I appreciate any assistance.
    Thanks,
    Tony

    Hi, Tony,
    When you're talking about changing the data in tables, "INSERT" means to add a new row, and you'll cause a lot of confusion if you use it to mean something else. So don't say
    "I want to insert the values of each select statement into two columns..."; use some other word, like:
    "I want to put the values of each select statement into two columns ..."
    If you happened to know that those two numbers were 354 and 1039202, you might say:
    UPDATE  table_x
    SET     a_count = 354
    ,       a_sum = 1039202
    WHERE   account = 4837;But you don't know the numbers; you want to have the query figure out what they are.
    In most places where you can use a literal (like 354 or 1039202), you can also use a scalar sub-query, a SELECT statement, enclosed in parentheses, that produces one column and (at most) one row.
    In your case, you can say:
    UPDATE  table_x
    SET     a_count = (SELECT count(*) FROM database.USAGE WHERE SERVICE_TYPE = 'C' AND ACCOUNT = 4837)
    ,       a_sum = (SELECT sum(minutes) FROM database.USAGE WHERE SERVICE_TYPE = 'DA' AND ACCOUNT = 4837
    WHERE   account = 4837;or, to make it more readable:
    UPDATE  table_x
    SET     a_count =
    ( SELECT count (*)
    FROM database.USAGE
    WHERE SERVICE_TYPE = 'C'
    AND ACCOUNT = 4837
    ,       a_sum =
    ( SELECT sum (minutes)
    FROM database.USAGE
    WHERE SERVICE_TYPE = 'DA'
    AND ACCOUNT = 4837
    WHERE   account = 4837;By the way, why are you using double-quotes around 4837? If it's a string, enclose it in single quotes. If it's a number (which I'm assuming in my code), don't enclose it in anything.
    WARNING: scalar sub-queries are somewhat like duct tape: they're extremely useful in certain places, and those places account for about 1% of their use. The other 99% of the time, there's a better way to do things, though the better way may require more expertise.

  • Combining two single recordset into one two column recordset

    Hi Forum
    Assume we have three types , each 'table of'
    CREATE OR REPLACE type type1 as table of number ;
    CREATE OR REPLACE type type2 as table of varchar2 (255);
    CREATE OR REPLACE TYPE TYPEVALUE AS OBJECT
    (object_type number ,
    object_value varchar2(255)
    resultset1 type1 := type1() ;
    resultset2 type2 := type2() ;
    resultset3 typevalue := typeValue3() ;
    I want to populate records of resultset3 from resultset1 and resultset2 , using resultset1 for first column of record and resultset2 for second column.
    One way is to do for loop but I don't want to use this.
    I need something similar to resultset3 to use it dynamically in select statement to do MINUS operation with another resultset . I think things like MULTISET, COLLECT, CAST can achieve what I want to do.
    Can you please help me to have a select statement that combines two single column rowset and put into a two column recordset.
    Thanks

    Hi,
    You can do something like this:
    SQL> create or replace type type1 as table of number;
      2  /
    Type created.
    SQL> create or replace type type2 as table of varchar2(255);
      2  /
    Type created.
    SQL> create or replace type typevalue as object(object_type number, object_value varchar2(255));
      2  /
    Type created.
    SQL> create type typevalue_tab as table of typevalue;
      2  /
    Type created.
    SQL> ed
      1  declare
      2     resultset1 type1 := type1(1, 2, 3, 4, 5);
      3     resultset2 type2 := type2('one', 'two', 'three', 'four', 'five');
      4     resultset3 typevalue_tab;
      5  begin
      6     for l_res in (
      7        select typevalue(t1.col1, t2.col2) as col
      8        from (
      9           select column_value col1
    10           , rownum rn
    11           from table(cast(resultset1 as type1))
    12        ) t1
    13        , (
    14           select column_value col2
    15           , rownum rn
    16           from table(cast(resultset2 as type2))
    17        ) t2
    18        where t1.rn = t2.rn
    19     )
    20     loop
    21        dbms_output.put_line(
    22           'Object Type:  '||l_res.col.object_type||' '||
    23           'Object Value: '||l_res.col.object_value
    24        );
    25     end loop;
    26* end;
    SQL> /
    Object Type:  1 Object Value: one
    Object Type:  2 Object Value: two
    Object Type:  3 Object Value: three
    Object Type:  4 Object Value: four
    Object Type:  5 Object Value: five
    PL/SQL procedure successfully completed.All the work here is done in SQL so it should work similarly if you have these things defined as nested table columns in the database.
    However, there is a caveat here: the lines highlighted in bold above are defining an arbitrary ordering for the nested table elements using rownum, as there is no concept of ordering within a nested table. You should change this part of the query to whatever makes sense in your environment, otherwise this solution cannot be guaranteed to be correct. Another option would be to use VARRAYs, as they will retain the order of elements.
    cheers,
    Anthony

  • How do I combine two user accounts into one account?

    When we originally set-up our iMac, I set-up two accounts for my wife and I. Since then it has been a royal pain with music and applications sharing. How do I merge the two accounts into one?

    I found an answer to this by searching on "merging two accounts" rather than "combining two accounts." BTW, it's a little mini-nightmare if you only use "combine" on both Google and Apple support. At least this post might help others avoid the same fate.
    Here's where to go to find the answer: http://discussions.apple.com/message.jspa?messageID=5629676#5629676

  • How do you combine two separate paths into one?

    I have two two separate paths that overlap and I want to combine into one path. How do I do that?

    I've now worked it out thanks it thanks. I highlighted the main path and the outer path to the second one and clicked on merge shape components. Then highlighted the inner path and did the same and this has worked.

Maybe you are looking for

  • Create own views in the Fact Sheet

    Hi Forum, I am trying to create my own views in the fact sheet. for instance open opportunities,closed oppportunities,open leads,closed leads... w.r.t a particular BP. plz guide how this can be achieved. Kind Regards! Lucas

  • How can I find out how much free space on my hard drive?

    I recently upgraded to Lion but still a newbie to Mac OS X.  I need to be able to check available space on internal hard drive.

  • Oracle Job in progress for too long (3 days)

    Hi guys, i am using oracle 10.2.0.3 database. One of the oracle job is in progress for almost 3 days & in active state. i tried enabling trace but didnt get anything. please let me know what should i do. EM also dont show any current or previous SQL

  • Change Reconcilation A/c in Asset class

    Hello, I want to change reconcilation a/c in asset class the asset opened under that class has some values , when i change the value in asset class the system is not allowing me to change it . Is there any exits for it ,if yes the kindly let me know

  • Is com.ms.wfc  only solution for extracting associated file icon on WinXX?

    Did someone ever succeed to extract associated file icon on some of the WinXX OS(in a form of Icon, Image or similar object)? If yes, then please supply idea, because after 10 ours searching, I didn't find anything except "...write your own code that