Combining Two Questions in one post

#1 After upgrading to Leopard my monitor no longer goes to sleep according to the time I have set in the energy saver preference panel. Does anyone one else have this problem? Is this a bug with leopard? It isnt fixed with the 105.1 updater.
2. MY audio crackles and is distorted at certain websites. I use the Bose companion 5 speaker system which operates off the USb port and the midi control panel. I don't believe that it is the speakers or midi because iTunes stuff and videos and all other files that contain audio recreate fine. Does any one else have this problem

I found out that if you have Time machine running and performing backups, the monitors will not go to sleep. If this is correct behavior or not I don't know. Funny thing is no one responded to this post, I discovered what was happening on my own

Similar Messages

SAP XI - Combine Two files as one in File Adapter

Experts,
I want to combine two files as one in File adapter itself. I am using a simple scenario of File-to-File where i am just sending the file from sender to receiver as it is , EXCEPT, i want to add one line at the end of the file .
I was thinking of doing this in File adapter , avoiding any mapping program in Integration Repository ..
ANY INDEA's ??
Regards,
Ashutosh

Hey
You have 3 options,first one can be to execute a OS command before message processing or use adapter modules to append the new line in the sender adapter.
the second option(and better one) is to do this via message mapping.
third option is to write a OS script and execute it after message processing on receiver file adapter.
one thing you need to make sure is that since OS scripts run on XI server itself(not on FTP server) so in case you are picking file from FTP server and delivering to FTP ,then you can't use option 1 or 3,you can only use option 2
Thanx
Aamir

How do I combine two regents into one in Logic Pro Arrange?

how do I combine two regents into one in Logic Pro Arrange?

Thanks for your input kcstudio. I would still be left with 2 regions although one after the other, on one track.
I am trying to save steps of the way I am combining the info of 2 seperate regions into one: bouncing the 2 tracks then re-importing that audio back into the project. It would save a lot of time if you could just drag one region on top of the other
W.W.

Combining two messages into one

Hello,
I have a mapping issue, I have a business process in which I have to combine two messages into one.
To do so, I have defined a message mapping in which there are two source message types, and one target message type.
When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
"Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
What am I doing wrong ?
How am I supposed to combine two messages into one ?
Thanks,
Elad.

Hi Elad,
Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
- we forget to include both the source message interfaces.
- or we interchange between one of the source message interface with the target.
Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
Regards,
abhy

HT4759 How do I combine two accounts into one

How can I combine two accounts into one account

If you are talking about iCloud accounts, you can't.
Or you could tell us what type of accounts these are?

Question - how do I combine two users into one?

I have migrated a lot of data to a MacBook Pro using Migration Assistant, in the process two users have been created on the Mac. How do I combine the two users into one?

You don't. Just log in with one, choose Go to Folder from the Finder's Go menu, provide /Users/ as the path. and drag the folder there; you'll need to provide an administrator password at some point.
(108352)

How to Combine two queries into One

Hi Gurus,
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
I have following two queries. How I can convert these two queries into one with the same result ?
Q1
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=32
AND venddate is null
AND vid in(select vid from view_vid where type='PDX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=55)
AND (id,vdate) in (select id,vidate from market_data where marketed_date is null)
AND id not in (select id from location)
Q2
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=20
AND venddate is null
AND vid in(select vid from view_vid where type='PBX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=40)
AND (id,vdate) in (select id,vidate from market_data where region_date is null)
AND id not in (select id from location)
I can UNION these two queries, but, is there any way I can write a single query with which gives me same result as above two queries?
Any help would be highly appreciated
Thanks in advance

Hi,
You can do something like this, which will be more efficient than a UNION:
SELECT id, vdate, vendorname, venddate, vid
FROM vendor
WHERE (   (    -- Conditions that apply only to q1
                           processid = 32
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PDX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 55
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM   market_data
                                WHERE marketed_date IS NULL
        OR ( -- Conditions that apply only to q2
                 processid = 20
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PBX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 40
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM market_data
                                WHERE region_date IS NULL
               -- The remaining conditions apply to both q1 and q2
AND     venddate   IS NULL
AND     id         NOT IN (SELECT id FROM location)
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ: https://forums.oracle.com/message/9362002

Can I group several questions into one post? I guess I will find out...

Hello!
I am new to this area of apple.com, but it looks like I should have been here a long time ago. Maybe I posted one post before I made the big purchase but all the problems I have had, this should be number 1 on my list. so far this might have ben able to take the place of appleCare?
I have had the MBP for about 4 months. I honestly am not too impressed yet, but it could be my own fault. Putting that aside I will ask my questions after telling you about my system and hopefully I can start feeling a bit better with this machine. it is a MacBook Pro that was made in 2007, the date on the notebook was 1 week before '08 iLife was released. I found out I did get the faster HD I payed for after calling AppleCare 3 times and finally just putting in the HD serial number and it took me to places that sell the HD and that is how I found out I did indeed get the faster HD. so it has the Intel Core2Duo, 2.4 GHz processor, V 10.4.10 (which I could swear last I looked it was 10.4.9 but AppleCare said I would have to know if the OS was updated.
I did add 2 2gb sticks of RAM, so I have he initial sticks that came with the machine. This leads me to my first question:
1. Is trying to sell the 2, 1 GB of RAM that came with the machine an OK thing to do? I did get the 2, 2GB sticks at an Apple store that is certified with Apple and an authorized store for Apple that can perform AppleCare-certified work. So I did not just bring it in to anybody because I was nervous doing the add-on in case the notebook needed to go into AppleCare.
Is it an OK thing to try and sell the RAM? it seems like such a waste and was a drag I had to purchase 2 new sticks of RAM in the first place. I am also wondering where there "667 MHz DDR2 SDRAM" what does the 667 MHz mean? is this a speed or something I should have paid more attention to when I purchased the new RAM?
2. My second question is if I am posting this question in the right area. is the OS I have called Tiger? When dos it end being Tiger? When the next OS comes out? Also, I think the next OS upgrade will not be free, right? is it worth getting?
3. When I first searched, and asked and searched, and asked and read and spent 8 months trying to decide what notebook I wanted to purchase, I used the chat on applestore.com. In fact when I decide to make the purchase I did it through the chat and at that time I still had not made up my mind on a couple questions about products.
I was "sold" the Extreme Base Station when I learn that I actually ned the Express one to play iTunes over my stereo. I was quite upset because I feel I was misled in many areas with this being one.
the express Base Station is nice but looks like it is for a call center or some other area that has many computers. Is this something that I should be able to sell, along with my RAM, at the same place? I am not sending it back to Apple for several reasons but now because it is too late and they charge too much to restock it.
4. Is there a brand of printers that work better with a MacBookPro? I have the 3rd all-in-one HP Photosmart (not all were Photosmart, but were all-in-one) and each one I am unable to get to work with the Extreme Base Station. made this clear with the online sales guy that I needed the router that played the iTunes over my stereo, about 2 ethernet ports, a printer port (USB or Ethernet), and potable. Well i was not given honest info because the Extreme is not the one I needed. I really ant to know if there is a site someone would recommend I post the RAM, Extreme Base Station, the Neoprene Incase sleeve (that scratches the MBP when I slide it in?
5. I am not impressed with this machine at all. the quality is so-so, not as good as I kept hearing. I know I will have some hardcore apple fanatics come down on me but maybe I can get some advice after they all get to vent. is the top "lid" of the notebook suppose to be so unstable when it is closed? if I press on the left side, the right side opens up about 1" or a slight bit more. and then press the right side and the lt side pops up? When the notebook is closed there is not a nice "tight" close to the machine. This appears to be a quality thing but maybe it means nothing. I would like a tighter seal so that dirt, dust, etc in the keypad area when I travel but I am more concerned that it may be a defect. I know I can bring it in to an apple store but being disabled makes it tough to get close t the only apple store in salt lake City.
6. Finally, i cannot get use to what programs or applications, are on the machine and able to be used without paying for them. is there a free program or something in Preferences that I can paste to the desktop that will tell me what the applications are basically for and which ones are already purchased or able to be used without paying for them. I find myself not use the notebook like I should because I think that what is in the dock is what is in the notebook. But apparently that is not the case. I have found something that lists some applications and it is called applications, imagine that, but it is not inclusive nor does it give a brief explanation what the program is for.
7. I lied. One more. I purchased Fusion but have not done anything with it except send in the rebate. I would like to use the XP that was on my previous notebook that died. Does anybody have any info on this program, good or bad? I still keep hearing about Boot-Camp and Parallels, but not VM Fusion. I would have thought this program would have taken off like a wildfire when I initially read up on it and learned the company's specialty who put it together, what it can do, etc. I do not have very good luck, if that is OK to say, with installing programs, especially a program that will need me to instal an OS over that in-order to se if it works.
I appreciate any informative information I get. thanks for being patient with me.
KJT

Hello-
I was curious about what you said you are installing, 2 gb 1000mhz each? correct? So tha made me investigate further wheree i purchased my 2gb sticks 600 mzh (or whaever the abbreviation is.)
Not only did I find out 8 days later that the price for what I paid $..shoot, I can't remember right now how much this certified apple store sold the 2 gb sticks to me but they were 1/2 the price the day I called to ask about the 600 vs the 1000 you mentioned. they are not an apple store but they are a certified reseller, or something like that.
They would NOT give me any refund. But I asked them about the sped since you had mentioned what you were installing. They said for the MBP, the AM only comes in one speed and is different depending which Mac a person has. this guy said they only will tak max 2 gb sticks with a speed of 667. so I am confused about that and ****** about how they ripped me of and Apple will not help me. they get a free spot on the only Apple Store's box in the Yellow Pages too, for some reason
If som bodu can explain this to me, I would really appreciate it. will even mark the question as answered if ou are somewhat nice abou it.

How to combine two albums in one ?

Hi, I bough a new mac and with it came the fastideous task of re-adding all the albums to iTunes once again.
Everything was going fine until I added a album which has 2 CDs 14 tracks in one CD and 5 more in a Bonus CD what happen when I added the CDs to the library was that iTunes made two different albums.
I tried changing the info, the name of album, the name of the artist even the release year everything was equal, yet iTunes didn't combine the two albums in one as it should.
After I selected both albums went to get info, options and in the Part of a compilation I selected Yes, which made the smaller album to disapear, the songs are in the library, but the album disappeared from the album library.
Any suggestion ?

Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
Closing and reopening iTunes will usually restore any album that "disappears" after an edit.
tt2

How to combine two photos in one without white border?

I am trying to combine two different photos next to each other (each 10 cm * 7.5 cm) in one of 10 cm * 15 cm and save it as a jpg file. Unfortunately when I do this in the print module (custom package) I get a file with a white border. I have set up page settings to 10*15 cm without border. How can I get a combined file without a border?

Titas,
This involves row level comparison of the report column data values we can achieve this in BI Publisher but at answers level there is no option.
Thanks,
Saichand

How do I combine two arrays into one?

I am trying to combine two byte arrays into one. What function do I use that will put in the information in the same order just combined?

battler. wrote:
Julien,
Used LV for years. Never knew that (concatenate inputs). Wouldn't believe the lengths ive used to get around it. Thanks
Same here! I actually learned about it taking a sample test for the CLAD.
Richard

Can I combine two objects into one?

Hi all:
I got a problem here: I just wonder if anyone knows how to combine the informations which I grabed from a SQL database to an object I obtained from an OO database at runtime.
I look forward to your reply and appreciate your concern!
regards
David
at [email protected]

Thanks for you reply, but the combined two objects can not be pre-defined because it is defined at runtime, say, there are a number of objects in database, only when you select the one for combining, you know what it is!
Cheers
David

Can Time Machine combine two HDs into one big one?

I know Mountain Lion added the ability to use multiple HDs simultaneously (I have done this). As it stands, it just rotates among the different HDs each time it does a backup. Is there a way to have OSX combine two HDs to make a 'virtual' bigger HD?
The reason I ask this is because my existing iMac has a 1TB internal hard drive. I have two external LaCie drives of 2 TB each that I use for Time Machine. I'm planning on getting one of the new iMacs and custom-ordering it with a 3TB internal drive. Obviously a 2TB drive won't fit, but if OSX can combine the two HDs virtually, it'll end up with a 4TB volume, right? Can it do that?

A hardware RAID is as reliable as the hardware. I believe the LaCie product you mention is a hardware RAID. I have no opinion of its reliability, and I don't know whether you can configure it as a mirrored RAID.
Maybe I should clarify. I see no reason to use a RAID for backup unless you need the space. If you need a 6 TB Time Machine volume, you have to use a RAID -- striped, not mirrored. For the safety of your data, regardless of the amount, you need redundant backups, not RAID. That is, you should have at least two independent backups, at least one of which is off site at all times.

Combine two servers to one

Hello,
We have the system 11.5.7:
AppsTier on one server and the DBTier, concurrent managers and the admin on another server. There is no the load balance for the AppsTier. The load balance requests more than one server. So we are on the Single Node architecture and Not the Multinode architecture, though there are two servers (one for AppsTier and one for DBTier and etc) in the system.
The system has been in production about 3 years. There has never been over loaded due to the user sessions in the system. I believe we should combine the system 11.5.7 on the two servers to one server. We have the server can handle the load with significant free margin in terms of the server resources, and the performance will be improved by eliminating the latencies between the servers in the current system. Another major benefit is that the simplification for the maintenance and the upgrade.
I need to convince the management for consolidating the two servers to one server as described. Do you agree the proposed one server system is better than two servers for our system?
Thanks In Advance.
Sean

i know it will easier to manager one node rathter than multi-node but my point of view is that you will have a complete server to server your (froms and web) and another complete server for your database and concurrent manager.
maybe you and other users have different resones and i am intersted to know is it just becase the management of one server will be easier or are there other resons.
one qustions please is your single server more prowerfull than the other 2 servers or not?
fadi

Combining two tables into one result

Hi all, I am fairly inexperienced with Crystal but have gained good results from the reports I have created, I am fluent in SQL and Basic to an extent. I am interigating a Pronto database and I want concatenate two tables into one report.
Table One: Customer Orders
Fields: Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
Table Two: Archived Customer Orders
Fields: Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
I want to complete a report that will tell me the sales for a given period and the outstanding orders for each customer total for all fields in each table combined into one figure.
Any help would be greatly appreciated.
Thanks in advance

Hi Grant,
As you said you are goot at writing SQL, in Crystal write a SQL statement in Add Command to join both table using Union / Union all
If you use Union then it will filter duplicate records and pull the data from database, If you use Union All then it will include all your duplicate records. Please use Union / Union All as required.
Once you get all data into the report create a parameter for date range and generate the summaries as required.
Thanks,
Sastry

Combining Two Questions in one post

Similar Messages

Maybe you are looking for