Combining two tables into one result

Hi all, I am fairly inexperienced with Crystal but have gained good results from the reports I have created, I am fluent in SQL and Basic to an extent. I am interigating a Pronto database and I want concatenate two tables into one report.
Table One: Customer Orders
Fields: Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
Table Two: Archived Customer Orders
Fields: Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
I want to complete a report that will tell me the sales for a given period and the outstanding orders for each customer total for all fields in each table combined into one figure.
Any help would be greatly appreciated.
Thanks in advance

Hi Grant,
As you said you are goot at writing SQL, in Crystal write a SQL statement in Add Command to join both table using Union / Union all
If you use Union then it will filter duplicate records and pull the data from database, If you use Union All then it will include all your duplicate records. Please use Union / Union All as required.
Once you get all data into the report create a parameter for date range and generate the summaries as required.
Thanks,
Sastry

Similar Messages

How do I combine two regents into one in Logic Pro Arrange?

how do I combine two regents into one in Logic Pro Arrange?

Thanks for your input kcstudio. I would still be left with 2 regions although one after the other, on one track.
I am trying to save steps of the way I am combining the info of 2 seperate regions into one: bouncing the 2 tracks then re-importing that audio back into the project. It would save a lot of time if you could just drag one region on top of the other
W.W.

Combining two messages into one

Hello,
I have a mapping issue, I have a business process in which I have to combine two messages into one.
To do so, I have defined a message mapping in which there are two source message types, and one target message type.
When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
"Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
What am I doing wrong ?
How am I supposed to combine two messages into one ?
Thanks,
Elad.

Hi Elad,
Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
- we forget to include both the source message interfaces.
- or we interchange between one of the source message interface with the target.
Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
Regards,
abhy

Collapsing two tables into one table or one queue

When you have data that exists in 2 tables A and B and B is essentially a child of A if you want to process these records such that you see all A's before their assoociated B how can you use either Streams or AQ to collapse these two tables into one? The data exists at it's source in database tables it will be replicated to another location and at that location I want to keep the data as it exists at the source but also process it in the ordered fashion I described above. My thinking is to publish the data to one queue but the challenge is to ensure that all A's are put on the queue before their B is. I don't just want a priority queue whereby all A's are processed before B's because if that happens B's will never be processed. but I simply want to avoid reading a B off the queue before I've read it's A.

No version number and no clarity of what you are trying to accomplish.
Without knowing that the problem is a nail ... I'd hardly be recommending using a hammer.

HT4759 How do I combine two accounts into one

How can I combine two accounts into one account

If you are talking about iCloud accounts, you can't.
Or you could tell us what type of accounts these are?

How to Combine two queries into One

Hi Gurus,
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
I have following two queries. How I can convert these two queries into one with the same result ?
Q1
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=32
AND venddate is null
AND vid in(select vid from view_vid where type='PDX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=55)
AND (id,vdate) in (select id,vidate from market_data where marketed_date is null)
AND id not in (select id from location)
Q2
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=20
AND venddate is null
AND vid in(select vid from view_vid where type='PBX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=40)
AND (id,vdate) in (select id,vidate from market_data where region_date is null)
AND id not in (select id from location)
I can UNION these two queries, but, is there any way I can write a single query with which gives me same result as above two queries?
Any help would be highly appreciated
Thanks in advance

Hi,
You can do something like this, which will be more efficient than a UNION:
SELECT id, vdate, vendorname, venddate, vid
FROM vendor
WHERE (   (    -- Conditions that apply only to q1
                           processid = 32
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PDX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 55
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM   market_data
                                WHERE marketed_date IS NULL
        OR ( -- Conditions that apply only to q2
                 processid = 20
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PBX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 40
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM market_data
                                WHERE region_date IS NULL
               -- The remaining conditions apply to both q1 and q2
AND     venddate   IS NULL
AND     id         NOT IN (SELECT id FROM location)
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ: https://forums.oracle.com/message/9362002

How can i add two table into one internal table

I WANT TO ADD THIS TWO DIFFERENT TABLE INTO ONE INTERNAL TABLE PLEASE HELP.
TABLES: J_1IEXCHDR, J_1IEXCDTL.
SELECT * FROM J_1IEXCHDR WHERE STATUS = 'P'.
WRITE: / J_1IEXCHDR-LIFNR,
 J_1IEXCHDR-DOCNO,
 J_1IEXCHDR-EXYEAR,
 J_1IEXCHDR-BUDAT.
SELECT * FROM J_1IEXCDTL WHERE TRNTYP = J_1IEXCHDR-TRNTYP
 AND DOCYR = J_1IEXCHDR-DOCYR
 AND DOCNO = J_1IEXCHDR-DOCNO.
 WRITE: / J_1IEXCDTL-EXBAS,
 J_1IEXCDTL-EXBED,
 J_1IEXCDTL-RDOC1,
 J_1IEXCDTL-ECS.
ENDSELECT.
ENDSELECT.
THANKS IN ADVANCED.

U have to link these 2 tables like this
SELECT
J_1IEXCHDR~DOCNO
FROM J_1IEXCHDR inner join J_1IEXCDTL
on J_1IEXCHDRDOCYR = J_1IEXCDTLDOCYR
WHERE STATUS = 'P'.
this is sample code only, and u have to check the F.key relationship.
Regards
Prabhu

Merging (Joining) two tables into one

Is it possible to merge two adjacent tables into one table in Pages? Also, how can you split one table into multiple tables?

If we use the exact meaning of the words, the response is no and no.
If we play a bit with the meanings we may do the trick.
(1) I create a table with 6 columns and 5 rows.
(2) select cells D1 …F5, copy, paste in the document but out of the table. We get the right half of the table.
From the tool bar, reduce the number of columns of table 1 fom 6 to 3. Bingo we have the two halves of the original table.
(3)Select the first half and increase the number of rows from 5 to 10
(4) copy the entire second half, select cell D1 in the enlarged table, paste.
Bingo, we have the merged table.
For sure, a merge and a split tables features would be welcome but as the table tool is the one used in the spreadsheet, I would be surprised if these features where introduced one day.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'11
Yvan KOENIG (VALLAURIS, France) jeudi 22 avril 2010 17:28:48

Question - how do I combine two users into one?

I have migrated a lot of data to a MacBook Pro using Migration Assistant, in the process two users have been created on the Mac. How do I combine the two users into one?

You don't. Just log in with one, choose Go to Folder from the Finder's Go menu, provide /Users/ as the path. and drag the folder there; you'll need to provide an administrator password at some point.
(108352)

Combining result set of two services into one result set

Hi,
I have a model where I am getting one result set (6 Fields) from BI query and another result set (3 Fields which gives real time values) from OLTP system. I want to show the output of these two result sets into single result set (7 Fields). I have a common field in both the result sets as key field.
I tried this using UNION operator but I am not able to set the Key fields and also in the table view of UNION operator I am getting any field to be added to table.
Can anyone help me to solve this problem?
Any help is appreciated.
Regards,
Amit

Hi Amit,
in this case, you have to use the combine-operator. However, this operator needs a key-field in each of these sets. E.g. Combine set (customer-id, order-id, week, delivery-state) with set (customer-id, city, client-class).
The combine operator might not be available when compiling to webdynpro, I did not check that.
Best Regards, Benni

How do I combine two arrays into one?

I am trying to combine two byte arrays into one. What function do I use that will put in the information in the same order just combined?

battler. wrote:
Julien,
Used LV for years. Never knew that (concatenate inputs). Wouldn't believe the lengths ive used to get around it. Thanks
Same here! I actually learned about it taking a sample test for the CLAD.
Richard

Retrive data from two tables into one internal table.

Hi SDN,
I am downloading the Assets data from two tables ANLA,ANLZ.
there is a common field ANL1in both tables and i have to retrive the data by using anl1 into the internal table.
can you please send me the SELECT Syntax for this probl.....
Thank you & Regards,
Manoj

Hi manoj,
Please see the following sample code. But kindly don't use join as it may hamper ur performance. No trouble in using two select query.
data: begin of itab occurs 0,
        BUKRS like anla-BUKRS,
        ANLN1 like anla-ANLN1,
       BDATU like anlz-BDATU,
        end of itab.
select anlabukrs anlaANLN1 anlzBDATU into corresponding fields of table itab from anla inner join anlz on anlaanl1 eq anlz~anl1 where (logexp).
Please come back for any clarification.
Thanks and Regards,
saurabh

How to combine two albums into one

I imported into iTunes two Shostakovich compositions so that I could burn a CD-R that contained these two works. The CD burning went fine, but iTunes insists on separating the two compositions into two albums in the display of all albums. I have made sure that the album titles and the artists displayed under the album icons are identical, but still the two will not meld into one. Will someone help me with this? I am using iTunes 9.2.1(4).

On the "Get Information" windows (reached with right clicks) of the two separated albums, one album was marked as "no" on the "part of a compilation" option and the other was marked "yes". I changed the "no" to a "yes" and they merged. I'm not sure if I got this from the site you gave me or if I just stumbled on to it. Either way, I thank you for your kind responses.

Can I combine two objects into one?

Hi all:
I got a problem here: I just wonder if anyone knows how to combine the informations which I grabed from a SQL database to an object I obtained from an OO database at runtime.
I look forward to your reply and appreciate your concern!
regards
David
at [email protected]

Thanks for you reply, but the combined two objects can not be pre-defined because it is defined at runtime, say, there are a number of objects in database, only when you select the one for combining, you know what it is!
Cheers
David

Can Time Machine combine two HDs into one big one?

I know Mountain Lion added the ability to use multiple HDs simultaneously (I have done this). As it stands, it just rotates among the different HDs each time it does a backup. Is there a way to have OSX combine two HDs to make a 'virtual' bigger HD?
The reason I ask this is because my existing iMac has a 1TB internal hard drive. I have two external LaCie drives of 2 TB each that I use for Time Machine. I'm planning on getting one of the new iMacs and custom-ordering it with a 3TB internal drive. Obviously a 2TB drive won't fit, but if OSX can combine the two HDs virtually, it'll end up with a 4TB volume, right? Can it do that?

A hardware RAID is as reliable as the hardware. I believe the LaCie product you mention is a hardware RAID. I have no opinion of its reliability, and I don't know whether you can configure it as a mirrored RAID.
Maybe I should clarify. I see no reason to use a RAID for backup unless you need the space. If you need a 6 TB Time Machine volume, you have to use a RAID -- striped, not mirrored. For the safety of your data, regardless of the amount, you need redundant backups, not RAID. That is, you should have at least two independent backups, at least one of which is off site at all times.

Combining two tables into one result

Similar Messages

Maybe you are looking for