Combo blu-ray/receiver and yamaha R467 receiver - no sound using blue ray

I have a 2 year old samsung combo blue-ray/receiver for my home theatere and the receiver side of it has just crapped out. i just bought a new Yamaha R467 receiver at best buy and it sounds great but when I try to play blue ray through it, there is no sound. the blue ray video plays, but no sound. I have HDMI from the output of the blueray-combo into HDMI 1 of the receiver and then HDMI out to the tv (samsung LCD 52"). I hve the receiver set on HDMI 1. Ideas?
thanks for any help
mike

Similar Messages

Updated to Premiere CC 2014 and AE CC 2014 and now have blue lines/blue imprints of windows and crashes after 5 minutes of use or on start up

iMac - 27 ", late 2012
Processor 3.4 GHz Intel Core i7
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.9.4 (13E28)
After I updated from CS6 to CC 2014, my screen started to display blue lines and/or a blue imprint of a previously closed window, and Premiere CC 2014 and AE CC 2014 began crashing after about five minutes of use. Also, an error message popped up telling me to update my CUDA driver. I took the iMac into Apple and after updating the CUDA driver in store with an Apple associate, the error message went away. They were concerned about the blue lines, and after 3 days of hardware testing, they determined that the screen was not failing, the hardware was in great shape and the lines and crashing must be a software related issue. I took the computer home, uninstalled and reinstalled AE using the appropriate installer, and rebooted. Then I uninstalled and reinstalled Premiere using the Premiere installer and rebooted again. During the second restart a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen. I typed in my password, opened up the Premiere project I'd been working on and immediately, the always dramatic message "A serious issue as occurred..." popped up. I tried opening it again, saved a new recovery copy and started to work on the project. Five minute later it froze up and I had to force quit. This happened two more times, both roughly after five minutes of use....back to square one.
Obviously, this is seriously hurting my workflow. Any advice you could give would be greatly appreciated!

... a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen.
The apple guys said this wasn't a hardware error? I don't know software errors to save imprints throughout a restart. If I were to live dangerously and assume anything it would be that you got a failing graphics processor.
Ever tried cloning your boot drive and then doing a complete wipe and re-install of OS and CC?

When texting one contact bubbles are blue instead of green, and texts sent are not being received, how do i sort this? cheers

when texting a friend, bubbles are blue instead of green and they dont receive the message. this is only happening with one contact,why's this happening and what can i do to sort it? cheers

Blue bubbles are using for iMessages, so problem with receiving is in iMessage.

Once and for all: Can DVD SP build Blu-Ray disc content or not?

Maybe I’m crazy, but…
Everything I’ve heard to date has Apple backing the Blu-Ray format. Believing this, I just spent $900 on a new Lacie D2 external Blu-Ray burner (which IS Mac compatible). I also purchased Toast 8 (which IS Blu-Ray compatible).
All I need to do now is build my disc content (assign H.264 1920x1080 content, build menus, etc.) then drop it all into Toast and burn Blu-Ray video discs… right?
So what is all this I’m reading here about DVD Studio Pro supporting the HD DVD format and not Blu-Ray???!!!!!!
Am I going to be able to do this using DVD SP or not, and if not, can anybody tell me a program I can use to build my Blue-Ray disc content? (All of my HD content is H.264 (1920x1080) rendered directly from Adobe After Effects).
My deadline for this project is fast approaching and I’m hoping somebody can shed some light on this. If I can build Blu-Ray discs and burn them on my Mac using Toast 8 and the Lacie D2, I’ll make my deadline and justify the $900 spent thus far.
Can anybody help?
Thanks, SM

Wait a minute,
Maybe I don’t need to buy PC to run DVDit Pro HD. I have a Mac Pro! With Boot camp I have a PC! Any reason I shouldn’t try running DVDit on my Mac via the Boot Camp beta? That way I'd also be using my Lacie D2 Bu-Ray drive. And with Roxio's 30 day return policy I haven’t much to loose...
I'm calling Roxio tech support. Let you know how it goes
Sark
Message was edited by: sarkmachine
A LITTLE LATER:
Just got back from digging into Roxio's discussion forum and here's what I found:
I have travelled down the same frustrating path my friend!
But I did succeed doing it all on my new mac Pro, finally...
Install BOOTCAMP (free beta). Install WINDOWS XP ($269 from AMAZON). Install ULEAD BD RECORDER, which comes with DVD MOVIEFACTORY 6 (free trial, $80 to buy).
BDAV worked well from SONY V1-U burning to MATSHITA BD-MLT SW-5582 and played perfectly in new SAMSUNG 1200 palyer on my 57" DLP.
TIP - install BOOTCAMP et al on its own HD, and use NTFS... This will come in handy when doing a BDAV from a file such as HDV1080 that is larger than 4GB.
To do BDMV, you'll need SONIC DVD-IT PRO HD ($499) which I have yet to try...
Frustrating process, but kinda cool to figure it all out, especially when NOBODY in sales at any of these places seems to have a clue.
So there you go - must be possible
Sark

Blue Ray with FCP and DVDSP

Any ideas when the new FCP version will be out and if there are any plans for Blue Ray support for current versions of FCP and DVDSP.
Thanks

Apple is always mum on these issues.
No who knows can tell.
It's blu-ray™, BTW, not blue ray.

Export to Blu-ray from Final Cut Pro 7 with LG BE12LU30 External Blu-ray

Hi all
I've got an iMac with Snow Leopard and I'm editing HD video in Final Cut Pro 7. I've created AVCHD discs on DVD to play in my Blu-ray player but now I want to create Blu-rays that will play in a regular Blu-ray player.
Has anyone got any experience of using the LG BE12LU30 External Blu-ray Re-Writer with FCP 7? I've checked other posts and it seems one user has had success with an earlier LG Model.
Basically if I connect this drive and use the Final Cut Blu-ray export option in share, will I be able to burn a playable Blu-ray?
Any help would be much appreciated!

Hi I have one of those drives too .. I use FCP to edit export the movie using 'current settings' and then import that movie Compressor .. alternative I also have Toast with the Blu-Ray plugin .. it gives a nice menu template and works well. http://www.roxio.com/enu/products/toast/plugin/overview.html

No More Surround Sound on Blu-ray player after Upgrade in MediaSmart

When I used the Blu-ray player in my home theatre I selected the "HDMI pass through" mode to get surround sound. I came across some new movies that would not play and after the update from HP the player would simply freeze up as soon as there was audio present. I had to go into the task manager to shut it down.
MediaSmart works fine on the laptop, but it only freezes up when I use the "HDMI pass through" setting.
I have tried "HDMI pcm" mode and that doesn't work either. The Denon receiver shows there are five channels working but I only get stereo sound out of the front left and right speakers. This would indicate that the Blu-ray player is not outputting in 5.1 surrond sound and that the laptop and the Denon receiver is working fine.
Hp supports' solution was to reinstall the old driver or try a system restore. I know a system restore isn't going to do anything. The problem is in the new software. The new software did not work on my HDX18 when it was in Vista, it didn't work when I upgraded to Windows 7 and it doesn't on my new dv8.
I tried contacting CyberLink to let them know that the upgrade is giving problems, but I think they are ignoring me.
Personally I think that either HP or Cyberlink just forgot to add the drivers for 5.1 and 7.1 surround sound.
If someone were to find a solution to this one I would be surprised. I am quite certain I covered every possibility, but you never know.
Any help would be appreciated.
Thanks
This question was solved.
View Solution.

OK, I found a solution. SORT OF. I use the laptop to watch region "B" Blu-ray movies that I buy out of England. Rather than set Media Smart to region "B" I purchased software from SlySoft.com. When the software is running it removes the region code and all that annoying copy protection. Fox is the worst, followed by Walt Disney. (Pixar Animation and Buena Vista) One specific movie that would not play on the old Media Smart software was "Ice Age 3 Dawn Of The Dinosaurs. When I tried, a red window came up prompting me to go to Cyberlink for an update. Of course after that the movie would play, but I had no surround sound in my home theatre.
So now I use the old Media Smart software and run SlySoft...no more red window...I have surround sound in my theatre through HDMI pass through.
The problem with this solution is that Slysoft costs around 114.00$ U.S. for a life time membership and free updates forever. HMMM.

Apple TV, Bose Sound System, Blu-Ray, FIOS

Got the Apple TV for Xmas this year. COnnected it to my Samsung TV (there are 3 spare HDMI ports), and get a great picture but no sound at all. I have been reading the various options, but unclear as to what is correct. Should I:
Connect ATV to my Bose unit
Connect ATV to my Blu-Ray
Connect ATV to my Verizon cable unit?
Been reading about the optical cable and not sure about how I would connect this Just having the ATV connected (the Samsung is hanging over the fireplace so cables look lousy) doesn't look good. Looking for ideas on how to get this connect so I have sound via the Bose. THanks to anyone who can help!

Hi
I have a simular problem,
Apple 2 tv, Samsung lec403630 tv
set up my apple tv with HDMI cable. No picture change to an old cable and now have picture. But no sound
connected an opitical audio cable to tv box and tv, but still no sound
i really can use a solution
Help ????

Using Blue Ray in FCP

I know not the first thing about Blue Ray and the more I use it, the less I know about FCP but. . . I am editing a project which requires me to choose between rip video from a DVD or using that same video from a Blue Ray disc.
Question: Is it possible to use Blue Ray video in FCP? If so, how do I get it into FCP and is it of a High Definition version or does it only convert to DV?
Thanks
R

If you're using commercial DVDs or Blu-ray discs (and it sounds like you're trying to do just that), you'll need to obtain the rights to the footage for your particular usage. When negotiating the terms of that agreement with the copyright administrator, stipulate that they provide the needed footage in an editing format - NOT in the final delivery format. It may add some cost to the project but be well worth it in the long run.
-DH

W500 Blu-Ray Mat**bleep**a BD-MLT UJ232A will not recognize Blu-Ray DVD movie

Recently purchased W500 4061- W6U with Mat$hita BD-MLT UJ232A optical drive at Firmware level "TC02" will not recognize a brand new Blu-Ray DVD. But will recognize and play a normal (non-Blu-Ray) DVD. The system sees the Blu-Ray optical drive and shows it is working normally. I attended to update the firmware, but the Lenovo Optical Disc Drive Firmware Update 1.6 utility, states the firmware is already at the current level and under the header New Firmware states "None". Any ideas? Thanks
Solved!
Go to Solution.

It has nothing to do with the drive.
Blu-ray movies are encrypted using keys. Hackers break the keys. So new Blu-ray movies then come out using new keys. WinDVD (your Blu-ray playing software) contains the keys, and needs to be updated. So see if there's a WinDVD update available from Lenovo's site. If not, then you'll have to pester Lenovo to get a new update from Corel. You can't get the update from Corel yourself.
Or you can simply buy a better Blu-ray player program, such as Cyberlink PowerDVD.
Good luck!

Ray Traced 3d and MY video card overheats

Hello,
First off, I am not trying to get support to fix this, although some insight what might be going on would be great if someone has an idea. I am using a GTX 480 with After Effects. Yes, I realize this is not a supported GPU but it does work, in my case, not the best.
THE ISSUE: I created a motion graphic that was basically 3 words and some shadows and reflections. I used the ray trace 3d render option, and when I was close to being done, I tried to render it. Unfortunately the video card temps skyrocketed from 70-80 to over 100 degrees celsius before rendering 2 seconds of the clip.
Is this something anyone else using a similar video card has experienced? I just want to see if anyone else has this issue using a GTX 480. Again I understand its not supported by Adobe, but this is what forums are for, to find others that may have had same issue.
I can still render, but it involves me pushing the card to the limit, pausing, and then restarting after the card has cooled down. I do have the most recent drivers from Nvidia, v 306.23. The ambient temps in my house are around 70 degrees Farenhiet, and my card idles at around 45-50degrees celcius. I have 24 gigs of ram and a i7 920. just for comparison sake, not sure if this is needed.
It might be an air flow problem too. I plan on getting a new pc when the new i7's come out next year, but this is putting a hamper on my work now. I am only a hobbyist/part time freelance at the moment.
Thanks for any input.

I believe standard maintenance for air cooled electronic equipment that has no air filtration system built in should be a monthly light cleaning and a semi annual thorough cleaning. One of the facilities that I occasionally work for on a freelance basis only cleans their machines when they fail. Something has failed on almost a third of my visits.
The last PC I built I put a filter in the air inlets. There's all kinds of materials you can get that do a good job of catching most of the lint without fouling up the air flow.
I have my laptops cleaned at least semi annually but I vacuum out the air vents twice a month with a low power device that doesn't spin up the internal fans. You've got to be careful that you don't damage the equipment by over revving rotating parts with too much air pressure.
If I were to set up an office workspace I'd put an electrostatic air cleaner in the office to minimize dust. One equipment failure on a project with a deadline would pay for a really high end filtration system. I run electrostatic air filtration in my home instead of the paper air filters on the HVAC system. It's amazing how little dust and lint we get in the house.

I just bought apple tv and would like to set it up for my family for christmas. i have a samsung tv and yamaha receiver. where do i plug in hdmi? i assume into receiver but not sure. also, plug is on back of receiver so much get behind all equipment

i just bought apple tv and would like to set it up so it works right away. i have samsung tv and yamaha receiver. do i plug hdmi into receiver? i assume plugs are in back of machined so i have to get behind all electronic equipment? does that make sense?

Welcome to the Apple Community.
If your receiver is connected to your TV by HDMI and has a spare HDMI input port, then yes plug the HDMI cable from the Apple TV into your receiver.
If that's not possible the HDMI lead from the Apple TV can go straight to the TV and you can connect the receiver to the Apple TV with an optical audio cable.

I dropped my iphone 4s and the screen is black with some blue lines. IS there a way to view my text messages on the computer?

I dropped my iphone 4s and the screen is black with some blue lines. IS there a way to view my text messages on the computer?

For instance, DigiDNA's DiskAid will let you extract your messages from the phone in human-readable format. Like .pdf.

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

My iPod Touch 4th Generation finished updating and now it won't turn on. the charge finishes, and when plugged in, it goes to a blue then white screen. and i cant do anything. also wont connect to iTunes. pls help

hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem

Combo blu-ray/re​ceiver and yamaha R467 receiver - no sound using blue ray

Similar Messages

Maybe you are looking for

Combo blu-ray/receiver and yamaha R467 receiver - no sound using blue ray