Combo built-in power outlet with USB charging ports...

Are iPhones only fully functional while charging on an OEM plug?  We just installed a combination USB charger into our wall and now the touch screen will not work while it is charging?  Anyone else have this particular situation?  We are using a Legrand Pass & Seymour P/N 340982 Combination USB Charger.

Seems the charger is the issue... I have never personally had an issue with using my device while charging via any accessory/cable/charger.

Similar Messages

  • Mac Book Pro Power Adapter with USB charge ports?

    Does anyone make a MBP power adapter with 2 USB charge ports? It seems logical to have one power adapter that charge your MBP, iPhone and iPad all at the same time while minimizing the things one would have to carry on travel.

    Hopefully!
    I said to them "you dont even need to put the ports on the brick itself, put it on that little wall plug adapter thingy... that way if you only want to charge your iOS devices you can leave the brick in the bag!... Fingers crossed and thanks again for the help tjk!
    Best,
    David

  • Is it safe to use the Belkin power strip with USB ports to charge my iPad? Or is the iPad USB adapter the safest route to take when traveling with device?

    Is it safe to use the Belkin power strip with USB ports to charge my iPad?
    Or is it better to travel with the Wall Charger provided with iPad?
    Concerned about safety of the device. Thanks for your thoughts.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Curve 8330 usb/charging port issues.

    My 8330 just started to have problems with its usb/charge port. I plugged it in last night before bed like I always do, but when I woke up it hadn't charged a bit and wasn't even recognizing that it had been plugged in. I tried my USB data cable as well, and that didn't register either unless I wiggled the cord around and held it still once it did register. I eventually did get the phone to register that I had plugged it in, but I had to wiggle the cord just so and leave the charger half-way plugged in once I found the sweet spot.
    It is a few years old and pre-owned, but this problem literally just cropped up. I haven't dropped it recently, and I only plug it in once a day. It has no problem holding a charge, but getting it to register the cord is a battle. Do I need to just replace it or is there a way to fix this? There are no other problems, just the port acting up. Thanks!

    You can try contacting Sprint for repair options for your device.

  • Connectivity Issues with USB 3 ports on macbook pro

    Hi,  I have a zoom r24 which is no longer working as an audio interface with my new macbook pro.  I have read a lot about issues with USB 2 devices not being compatible with USB 3 ports on the macs. This seems to be midi as well as audio devices.  Can anyone recommend or point me to a list of supported devices for both audio and midi which are guaranteed to work with a late 2013 macbook pro retina display.  I cant afford a thunderbolt device.  Thanks steve

    Just a wild thought here, but have you tried inserting a powered USB 2.0 hub between the MacBook and the interface?

  • Will You Repair My Cricket Usb Charging Port?

    Alright, here's the gist of it all. My ZTE X500 by Cricket's usb charger port is BROKEN. I have a very difficult time trying to charge my phone, if it'll even try! It's broken at no fault of my own, and I need it fixed ASAP. Should I try to buy a universal charging pad, or can you guys fix it? If you can fix it, how much would that cost and how long would it take? My Cricket is barely a month old. Please HELP! Thanks!
    Solved!
    Go to Solution.

    Bring it to the store to see your options. If they deem the port problem not due to accidental damage, the store might be able to exchange it under manufacturer warranty.
    Dan K. | Mobile Specialty Stores
    Any opinions expressed in this post are those of
    the author and do not represent Best Buy Co., Inc.

  • Will Apple replace an iPod with broken charging port

    My daughter has had her iPod for a year will Apple Repair or replace an iPod with broken charging port.

    If still under warranty, Apple frequently says the damage is caused by operator error and would only be covered by an Applecare+ extended warranty.
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace the dock connector for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         

  • I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable

    I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?

    That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
    iTunes: Restoring iOS software - Support - Apple

  • I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

    I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

    Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
    http://support.apple.com/kb/ht3302
    Try a reset aswel:
    - hold the home button and sleep/wake button down for atleast 12 seconds
    - release both buttons as soon as you see the apple logo appear

  • Yellow mark in screen next to usb charging port on z3

    Yellow mark in screen next to usb charging port on z3

    Hi moon79,
    In such a case I can only really advise that you have the device checked by a service agent. Please use my signature below to find contact details.
    I apologize for this inconvenience.

  • My ipod mini's screen just shows a wall outlet with a charger going in

    and no matter how many times i try to reset it, it just shows the apple logo for a while and then it shows the same pictures of an outlet and a charger. what does this mean? what do i do to fix it?

    i just had this very problem yesterday. what you need to do is connect the ipod to the computer (preferably through a high-speed USB, although regular low-speed works too) and run the latest update, which in this case is the 11-17. it's availible on the apple website or, if you already ran it, should be in your start menu under "ipod". if that doesn't work, which didn't for me because my computer didn't recognize the ipod (that happens if the battery is too low), you can reset the ipod, plug it in to charge with the electric plug, and then plug it in to the computer. i just came back from a visit to my apple store where the rep was very helpful and did all this for me - but i could have just as easily done it at home myself had i known these instructions.

  • 1st gen 4GB nano won't power up with USB

    My new-to-me old Nano doesn't work on battery power, even after new battery installed, but powers up and plays when docked onto speaker. No big deal, and merely mentioned as a possibly related symptom...main issue is that it won't power up using USB cable to PC. My other nano works fine with the same cable. The bad one gives an Apple logo, then backlighting flashes on for a mere fraction of a second and then it shuts down. Then about three seconds later it all repeats again. There's only 25 songs on this 4GB model. I could care less about this problem if only my music was already loaded onto it. It cost me $15 on ebay and $5 for a battery, so $20 into a useless unit bites. $30 could have gotten me a good working one...hopefully this can be revived for cheap?

    Well, I tried to other things... I turned off the backlighting to see if less current draw would help. It didn't. Also, the backlighting option gets deleted off the main screen menu after it dies/reboots.
    I also tried connecting to PC with the ipod screen ribbon cable disconnected just for kicks...still a no-go.
    I just want to load it up with songs...sigh.

  • Charging with USB charger

    Do USB chargers work? The charging LED is off?
    MacBook Core Duo   Mac OS X (10.4.8)  

    Hi fideldavila,
    Do USB chargers work?
    I was looking for a USB charger for my iPod Shuffle and the sales person at the Apple store told me about a Belkin USB hub made for the iPod Shuffle. Its a USB hub with a cradle usb on the top for the Shuffle and 4 usb ports on the side. I love it, works great!
    Belkin iPod USB hub
    Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive   Mac OS X (10.4.8)   Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

  • CAMTEC power supply with USB interface

    Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
    Many thanks in advance for any advice.
    Solved!
    Go to Solution.

    JB wrote:
    Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
    Many thanks in advance for any advice.
    Looks like you'll need to call a .NET DLL unless they wrote some wrapper LabVIEW VIs .

  • Can a USB charging port be replaced?

    I have a Samsung charge. If I plug in the USB charger, the phone goes blank and freezes. This occurs even if the charger is not connected to power, so I suspect there is a loose connection or unseated port. If I remove the battery and replace, letting it reboot, with charger plugged in, it will show the battery status bar as not charging. I carry 2 extra batteries with me, checked the other 2. Sames issue, so I doubt it is the battery.

    If the phone is still under warranty, you should check into the possibility of a warranty replacement. If it's no longer under warranty, it might be worth contacting a cell phone repair shop to see if replacing the charging port is possible. If they can replace it for a reasonable cost, it could solve your problem. Of course, be sure it's a reputable shop.

Maybe you are looking for

  • GE70 and Windows 8.1 Update

    Hi there, I was wondering if anyone has managed to update their GE70 running a pre-installed Windows 8 64bit to the Windows 8.1 that Microsoft rolled out. The update shows up in the Store but download doesn't seem to start. I tried downloading the IS

  • Documentation for PostProcessingPluginHelper

    Does documentation for the PostProcessingPluginHelper class exist?  I have not been able to find it in the Java SDK docs.  I'm trying to determine the arguments to the PostProcessingPluginHelper.createInfoObject(...) method.  My objective is to add a

  • Accented characters, XML, Flash

    I have a flash application which is pulling information to populate dynamic fields from two XML files. We have three languages supported, and have been having problems with the non-english accented characters displaying properly when they are called

  • Windows 8.1 & Skype: how to call a contact from the Windows Contact List?

    Hi  I just added a contact on Win 8.1 Surface. When I try to call directly from the windows contact list I get a message that skype has been replaced by skype for desktop. When I remove the skype app (and keep skype for desktop) calling from the list

  • New playlist won't advance

    I just created a new playlist, and when I play it, it won't advance beyond the first song I choose. I tried turning on the shuffle option, but it does not fix the problem. After the first song, iTunes stops and won't advance unless I manually click o