Combo drive stopped working, and not recognised
I know there has been a few post about the combo drive stopping working on the PowerBook.
I have not dropped the machine, and it has had no accidents. Was wondering if anyone had any advise as to what to try to trouble shoot this problem, or is it more than likely a hardware fault?
Many thanks in advance and Happy Holidays.
Richard
I have a powerbook g4 just bought a few months ago from a friend. I have always a pc guy, and use to work on Macs (desktop publishing) but was more into the gaming for fun. Well, I as I mentioned I bought this powerbook G4 for a good price (so I thought) and after a few months the combo drive stopped functioning properly, then it died completely. I brought to a certified Mac repair center and was astounded at the cost to replace was going to be, it was between $400 and $500.00. This blew me away, I have to replace DVD Burners on PC's in past and it cost me about $40.00. I tried, and the key word was tried to contact someone at Apple through email and never got a response. I finally called over the phone and was told it would cost about over $500.00 to repair. Well, I guess I am going to stay a PC guy, was actually considering one of the new IMacs, but it most likely will cost a lot of money to do any repairs on it, it looks like it has similar drive. FU Apple!
Similar Messages
-
My 7 year old macbook hard drive stopped working and I put in another hard drive but when I went to restore my information from airport time capsule it only shows today and nothing older. Help?
Did you do a TM backup after you installed the disk? It may write over the previous backup.. but it should actually start a new one.
Read the info about using migration.. see http://pondini.org/TM/Home.html
Or the Mac is probably looking at the backup as from a different computer.
See the details of how to use TM to restore to a different Mac.
Q17 here. http://pondini.org/TM/FAQ.html
I would read through 14-17 carefully.
You should be able to do a full recovery of the TM backup to a USB drive plugged into the computer. -
Re: display driver stopped working and has responded
I have hp envy touch smart 15-J070US i have smae erorr " display driver stopped responding and has recovered : Display driver AMD drive stopped responding and sucessfuly recovers " and alway the scren goes to be black or stopped before this messege, I tried everything " uninstall driver and reinstall it , recovery windwos , update driver " nothing work , what I should do , I'm really upset from this message , recently I'm trying to not use my envy laptop to not see this message , plz if you have any solve , thanks and waiting
Hi @Ayman6784
Welcome to the HP Community! I see that you are getting a “display driver has stopped” error message and I will be happy to help you with this. Are you using the AMD driver from the HP website or did you download it from AMD's website? Are you using Windows 8 or 8.1?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
using itunes and was notified i had to update to IOS7. During this update my Iphone 4 froze, screen shows a charger lead with an arrow towards an itune symbol. nothing works now and I tunes does not recognise. Gone through steps in help but no joy. Can anyone help?????
force the phone into recovery mode (search Google) and attempt to restore the phone again.
-
HT1391 Purchased an App now it has stopped working and not in my purchaes file
Hi, I purchased an App (not expensive one = DOFMaster) Since then my computer crashed and I had to re-install the OS, the App has stopped working on my iPod and now is longer showing in the purchased part of iTunes, if I go to the store it asks me to purchase again.
What can I do?
I have looked through the iTunes complicated site to find an answer but am at a dead end.
Can I or how do I contact Apple to re-send what I have already paid for?
Many Thanks for any help
RussNot completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
ALSO, if you feel like all your music will be gone as well follow through these 2:
> Downloading past purchases from App Store, iBookstore, and iTunes Store
> How to use your iPod to move your music to a new computer
IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS. -
i use hp g61, if any one know about my problem then please reply.
Hi arman124, and welcome to the HP Forums!
I understand that you are experiencing a problem with the display driver stopping and recovering when using Google Chrome. I will try my best to help you resolve this issue. To better guide you, could you please tell me the full model number of your notebook and the operating system running on it. Here are some guides for How Do I Find My Model Number or Product Number? and Which Windows operating system am I running?.
I am also including this video for How To fix "Display Driver Stopped Responding " in hopes that it will resolve your issue.
Please let me know how it goes.
Thank you and have a great day!
I worked on behalf of HP. -
I tried to work this for a telephone system Yvonne but stopped work and not work, what do I do
Tried to work this phone system iphone3g but stops working system did not speak ..What can I do to restart the phone???
Post in your native language... your statments make no sense in English.
-
Skype keeps crashing on log in "display driver stopped working and has recovered"
HiI have ati radeon 260x OC with the lattest cataclyst driver from AMD site. When I log in on skype display driver crashes but sometimes all system is not responding (freeze) and I have to restart. How can I resolve this? I use lattest skype version and windows 8.1. Thank you!DxDiag loghttp://pastebin.com/6aBX0Hd8
It seems that the latest Skype versions don't work with AMD Radeon R7 200 Series graphic card. Try to uninstall the currently installed version and install the 6.14.0.104 version using the download links provided here: http://community.skype.com/t5/Windows-desktop-client/ASUS-USB2-0-Webcam-not-recognized-by-Skype-6-18... Make sure to disable automatic updates:Tools -> Options -> Advanced -> Automatic updates ->Turn off automatic updates
-
Disc Drive stopped working and isnt recognized
So I got back from a party tonight to find that my iMac wont take in any discs, and does not seem to recognize that there is a drive there at all. If I try to put a disc in it wont take it at all and pushing eject wont even bring up the little eject symbol that alwas comes up
To Apple Discussions!
Which model G5 iMac do you have?
http://docs.info.apple.com/article.html?artnum=301724#301724 How to identify your iMac
Make sure the CDs are not scratched, dirty and/or smudged.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
See if repairing permissions helps. -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply. -
Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.
That is very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
Tested video cards for Photoshop CC and CC 2014
Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work. -
Elements 10 was deactivated on desktop and installed on new laptop. Have on
y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
help!?I am using photoshop Elements 10 under the create tab...slide show.
Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago. Had not used it other than for photo editing until today.
I can also not login in thru the program. It simply spins and I finally had to force close the program
Toni V. Sloan
Sent from my iPad
On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
created by Chris Cox in Photoshop General Discussion - View the full discussion
Photoshop doesn't do slideshows… What software are you using?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hp Pavilion dv6 Notebook , Driver display stopped working and has recovered
Hi, I have a problem with my driver display....
I installed the Autocad program , and after 2 weeks, every time that I open the Autocad, after 4 or maybe 5 min. the screen goes black and after that a note shows up saying: Driver display stopped working and has recovered. I Try to update everything using the Hp support assistance and still i have the same issue. I don't know much about the computer and the driver so I will appreciate if somebody give me a solution. Thank you!!!Hello @youleeus,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the driver display has stopped working, that it has recovered, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista. This should help prevent the GPU on your computer from timing out.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?
I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/
Maybe you are looking for
-
Helppppp!!!!!!
-
When I went to clean I went to turn on my iPod and it wouldn't turn on. I plugged it into every Plug In, in the house and it wont even recognize that it is there. so I am asking you. what should I do? I have tons of apps and songs on an 8GB, 3rd Gene
-
I start the applet from a html page with <applet....width="100%" Height="100%">. The problem is the components on the applet are created dynamically and can be changed to need a different size applet by changing a config file. The applet use table la
-
Sql Developer Data Modeler 3.0 EA1: Relationship source and target names
When opening my version 2 model in version 3.0 EA1 the source name and target name of all my 231 relationships are deleted. Is there a solution for this? I don't want to reenter these 462 labels... Sincerely, Marc de Oliveira
-
Eliminating Group Tree Level in VS2010
I need to have a variable number of levels in the group tree in VS2010, a technique I have used in CR for VS2005. I also saw this resolved for someone using VS2008 on thread 1493907 using the same method that I used in 2005. If, at the most detailed