Combo drive won't burn cd

I have an iBook G4 purchased in 1/05. I've never really had a reason to burn a cd until recently when I purchased a digital camera. I loaded the pictures into iPhoto and tried to burn them to a cd. Everything seemed to be going fine. There was a message that the burn had been completed. My disk was ejected. Then an error message appeared, "The burn to the TEAC DV 24SL failed. The device failed to respond properly. Unable to recover or retry." There is no data on the disk and other attempts with other disks produced the same result.

I don't use iPhoto but you might try to do a burn from the Finder to see if your problems are iPhoto related or burning in general, stick a blank CD-R in the drive and then drag some documents/files onto the CD icon, when you're ready, burn the disc (under the File menu).
Patrick

Similar Messages

Combo Drive Won't Burn

Ok, Im having trouble with my combo drive on my iBook g4.. The drive is reading and ripping discs like normal but when ever I try to burn a disc, be it iTunes or from a burn folder it initializes and then just ejects the CD and and says "The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry"
What's going on???
I did a software update right before this happened.. Could that be a problem?
iBook G4, 512MB, 1GHZ iSight, Mighty Mouse, iPod Video 30GB

Ok, found the problem. Bad media.. Don't buy "sale" generic items.

Toshiba DVD CD-R combo drive won't burn CDs

Help,
My Toshiba DVD-ROM / CD-R COMBO internal drive will not burn CDs. I have disabled the WIN XP service IMAPI CD-Burning servicem, but still it will not burn CDs. It used to work OK.
Its a SD-R5112 model.
Apologies to the moderator, if this is posted incorrectly, I'm not a frequent user.
System configuration:
****************System Information****************
[MSI_Info]
OS Version:      WinXP
LUS Version:      3.73.000
Language:      2057
MB Model Name:      MS-6593
MB BIOS Vendor:      AMIBIOS
MB BIOS Version:   1.50
VGA Model Name:      UNKNOWN
VGA Driver Version:   UNKNOWN
VGA MSI Version:
VGA BIOS Version:   UNKNOWN
[OS]
Name:         Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Manufacturer:      Microsoft Corporation
Version:      5.1.2600
CSD Version:      Service Pack 2
Windows Directory:   C:\WINDOWS
Boot Device:      \Device\HarddiskVolume1
Total Virtual Memory:   2048 MB
Free Virtual Memory:   2008 MB
Total Visible Memory:   512 MB
Free Physical Memory:   231 MB
Serial Number:
Install Date:      08/07/2003
Current Time Zone:   Paris , Belgrade , West Central Africa
Locale:         0409
State:         OK
[System]
User Name:      WINXP-STEVE
Description:      AT/AT COMPATIBLE
Model:         MS-6593
Manufacturer:      MSI
Number Of Processors:   1
Total Physical Memory:   512 MB
System Type:      X86-based PC
System Wake Up Type:   APM Timer
Power Supply State:   2
Power Manage. Support:   null
Bootup State:      Normal boot
[BIOS]
Name:         Version 1.00
Manufacturer:      American Megatrends Inc.
Version:      AMIINT - 10
Serial Number:      00000000
Release Date:      04/02/2001
Target Operat System:   Unknown
Language:         English
State:         OK
[CPU]
Name:         AMD Athlon(tm) XP 2000+
Description:      x86 Family 6 Model 6 Stepping 2
Manufacturer:      AuthenticAMD
Processor Type:      Central Processor
Version:      Model 6, Stepping 2
Data Width:      32 Bits
Socket Designation:   Socket-A
Processor Id:      0000005500000662
Processor Family:   Power PC 604
Processor Stepping:   2
Max Clock Speed:   1670 MHz
Current Clock Speed:   1670 MHz
Current Voltage:   0 V
External Clock:      133 MHz
L2 Cache Size:      256 Kb
Availability:      Running/Full Power
Power Manage. Support:   false
State:         OK
[Memory]
Name:         Physical Memory
Memory Device Locator:   DIMM1
Memory Bank Label:   RAS 0 & 1
Memory Capacity:   512 MB
Memory Total Width:   null Bits
Memory Data Width:   null Bits
Memory Type:      3DRAM
[Mainboard]
Name:         Base Board
Manufacturer:      MSI
Product Name:      MS-6593
Version:      1.0
Serial Number:      00000000
[Sound Device]
Name:         Realtek AC'97 Audio for VIA (R) Audio Controller
Manufacturer:      Realtek
Product Name:      Realtek AC'97 Audio for VIA (R) Audio Controller
Availability:      undefined
Power Manage. Support:   false
State:         OK
[Network Adapter]
Name:         Realtek RTL8029(AS)-based Ethernet Adapter (Generic)
Manufacturer:      Realtek
Product Name:      Realtek RTL8029(AS)-based Ethernet Adapter (Generic)
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         1394 Net Adapter
Manufacturer:      Microsoft
Product Name:      1394 Net Adapter
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         RAS Async Adapter
Manufacturer:      null
Product Name:      RAS Async Adapter
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         Packet Scheduler Miniport
Manufacturer:      Microsoft
Product Name:      Packet Scheduler Miniport
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         WAN Miniport (L2TP)
Manufacturer:      Microsoft
Product Name:      WAN Miniport (L2TP)
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         WAN Miniport (PPTP)
Manufacturer:      Microsoft
Product Name:      WAN Miniport (PPTP)
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         WAN Miniport (PPPOE)
Manufacturer:      Microsoft
Product Name:      WAN Miniport (PPPOE)
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         Direct Parallel
Manufacturer:      Microsoft
Product Name:      Direct Parallel
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         WAN Miniport (IP)
Manufacturer:      Microsoft
Product Name:      WAN Miniport (IP)
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         Packet Scheduler Miniport
Manufacturer:      Microsoft
Product Name:      Packet Scheduler Miniport
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
Name:         Microsoft TV/Video Connection
Manufacturer:      null
Product Name:      Microsoft TV/Video Connection
Availability:      Running/Full Power
Power Manage. Support:   false
State:         null
[Video Controller]
Name:         NVIDIA GeForce2 MX 200
Current Refresh Rate:   72 Hz
Installed Drivers:   nv4_disp.dll
Driver Version:      6.14.10.5216
Inf File name:      oem7.inf
Availability:      Running/Full Power
Monochrome:      false
State:         OK
[Video Configuration]
[ ERROR: SPECIFIED ATTACHMENT MISSING ]

I downloaded the Nero BurnRights from the link in your reply. I installed it. After I installed it and re-booted my PC, there was no Nero group to add users to. Or if there was I can't find a way of adding users to the Nero group.
If I look in the system event log, there are lots of times where the cdrom shows and error. If I double click on the event entry, it says "The device, \Device\CdRom0, has a bad block " . If I look this up, it suggests that the drive may need to be cleaned. So I cleaned it with a CD cleaning disc. It made no differance.
Help !

Combo drive won't burn CDs or read DVDs

My finace renectly purchased a new iBook G4 in early October, and the combo drive has never been able to burn CDs or read DVDs. Is this a common problem with iBooks? Is it a software problem or a hardware problem? How do we go about getting it fixed without Applecare? Any help/info would be greatly appreciated.
Thanks,
Zach
[email protected]

Hi, Zach. Welcome to Apple Discussions.
You have found the G3 Dual USB iBook Forum, but I can help you out a bit. The warranty on the iBook gives you free phone support for any and all issues for 90 days. Use it. For full information on the warranty in plain language, check out Rachel's helpful FAQ Is phone support and warranty service free?
I recommend that your fiancée buy AppleCare. If you have any problems whatsoever with a new iBook within the first year of its eligibility, it is foolhardy to not purchase AppleCare if it is available where you live.
For future reference, the iBook G4 Discussions can be found here:
http://discussions.apple.com/category.jspa?categoryID=131

My BD combo drive won't burn to any type of RW media

I have a Satellite L770-BT4N22 laptop with a Mat**bleep**a BD-CMB UJ141EF BD-DVD +/- RW DL optical drive. It will not burn data discs or DVD-video to any type of RW discs, either CD or DVD. It burns audio to CD-RW with no problem. I have tried both Maxell and TDK discs. When I try, I get a message similar to "bad media, try with another disc" or "incompatible media". All of my system drivers are up-to-date. I have tried running the "drive won't read or write to disc" wizard on the Microsoft support site and it states that the media is "unrecordable" when it tries to write to it. The drive burns data and video to +/- R discs without a hiccup. Any ideas?

Try these suggestions if there are any you haven't:
What can I do if my CD or DVD drive doesn't work properly in Windows 7?
- Peter

Combo drive won't play CD's

after recently (seemingly) ironing out the bugs in iTunes 7.0.1, my combo drive won't play commercial CD's. MP3 CD's play in iTunes just fine and it will burn CD's. but both the finder (copying) and iTunes freeze when i try to play commercial CD's. when trying to copy aiff files to harddrive as a workaround, i get the following error message:
"some data on (in the file) is unreadable or unwritable. error (-34)"
i suspect the problem is with the drive itself as an external CD-DVD firewire writer has no problem and works with iTunes just fine.
is the combo drive dying? is there a software patch somewhere? is the problem caused by iTunes? quicktime?
PowerBook G4 Mac OS X (10.3.9)

As in the posting of Oct 3 from regmetc, following
the install of iTunes 7.0.2 and QT 7.1.3, my combo
drive won't play most commercial CD's. Most curious
is that I have so far found ONE commercial CD in my
library that plays just fine, but haven't had the
time to check all of the 200+ cds I own. It will burn
CD's and read DVDs. but iTunes will freeze when I try
to play commercial a CD.
An external CD firewire writer has no problem and
works with iTunes just fine.
Booting from an external backup drive with an earlier
cloned OSX 10.4.6 and iTunes 6.0.2 did not cure the
problem.
Hardware test shows no hardware problems.
as a followup ... did extensive hardware testing and software re-loading and found that there was nothing wrong with the hardware ... everything worked just fine if I returned to OS 10.3.9 or earlier and itunes 6 or earlier. I found I could run OS 10.4.0 through 10.4.8 and have the cd drive work fine if I stayed at itunes 4, but once I changed up to 6 or 7 I lost the drives ability to read music cds. Data cds are not affected and DVDs play just fine.
I am now assuming that there is some code change whereas OS 10.4 and itunes 6 or 7 doesn't provide the proper driver for the cd combo drive. I have a cd rom drive in another laptop that is not affected and any external cd drive seems to be fine. It would be curious to know if a different enternal drive like a superdrive would work.

Cd/dvd drive won't burn a disc,although it will read a cd

i have a compaq cq62 with windows 7 home premium with the cd/dvd drive won't burn a disc,although it will read a cd

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive will now burn a disc.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it is now able to burn a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Sept. 2006 17" 1.83GHz Intel iMac Combo drive won't read discs...

When I insert a CD (audio or data), the drive spits the disc out after about 15-20 sec. Nothing shows up. Nothing said. The disc just comes back out. Hardware Info shows the drive is there:
MATSHITACD-RW CW-8124:
Model:          MATSHITACD-RW CW-8124
Revision:          DACH
Serial Number:
Detachable Drive:          No
Protocol:          ATAPI
Unit Number:          0
Socket Type:          Internal
Low Power Polling:          Yes
Power Off:          No
But nothing else. Doesn't show the serial number either. Can't find any tools to test the drive with. A friend suggests I remove the drive and try manually cleaning the lens (Using CD/DVD cleaning disc did nothing). But I don't want to go to all that trouble, if there isn't a more than likely chance of it working. Too much disassembly/reassembly effort I'd rather just replace the drive while I'm in there.
I don't have the original discs that came with this system, so I can't run AHT. I'm told it won't tell me anything either, just that the drive is there, which the Hardware Info already says.
Should I try to go in and manually clean the lens or just replace the drive? Has anyone else manually cleaned their lens and had their drive work or is replacement really the only option at this point?
I'm told I should just get a USB external CD/DVD drive and be done with it... but I'd like to restore this computer to fully working order, if possible.

The Early iMac's are one of the most difficult iMac's to open and work on. Another problem given it's age, is that display cables and other connections are very brittle and it is very likely that more harm than good will come from working on it.
On that note: I suggest finding and using an OS X compatible External tray loading CD/DVD drive for several reasons.
1. External CD/DVD drives are faster and more reliable than slim-line super drives.
2. For about the same cost or less, a good External CD/DVD drive should also give you the ability to burn CDs and DVDs.
3. Using an External CD/DVD drive is a lot easier than ripping into the iMac and replacing the internal drive.
Personally I am happily using an older LG GE24LU20 with both my Early Core Duo and Mac Mini, but others here have also recommended that the GP10 DVD and Blu-ray, the LaCie's and the OWC FireWire drives are all very good solution for a busted internal super or combo drive.

Combo drive won't recognize CDs or DVDs

My original iMac won't show Cds or DVDs on the desktop. When I insert one, it says it needs to be formatted.
Probably need, a new Cd reader, right?
Can I install this myself? Cost?

Sorry for my late reply. I kept forgetting! Thank you for your responses (and for your helpful links, mrtotes). The more I read about internal DVD writers vs. external DVD writers, the more my head spun. Some user reviews expressed the opinion that the small form factor DVD burners (internal, slot loading) were the devil's peripherals and that they had a much easier time of it with external tray loading ones. Others wondered about buffer underrun (or is it overrun?) with externals.
While I was mulling this over, my service provider had already ordered and received the new combo drive for my iMac; so it looks like I'll be going with an external DVD burner (just as he recommended).
Here are a few links I found helpful:
Xlr8 Your Mac: searchable database of DVD drives with user reviews (both internal and external):
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso
Mac OS X Hints Forum (where I obtained the above link; also has info about brand of internal CD/DVD drives Apple uses)
http://forums.macosxhints.com/showthread.php?t=79620&highlight=superdrive
Apple Discussion from June 2006 about internal and external DVD writers.
One person wrote, "Internal drives seem more reliable and are also far cheaper." But several responded with their experiences of external drives that work "flawlessly" (according to one poster, describing his Sony DRX-720UL).
http://discussions.apple.com/thread.jspa?messageID=2608144&
Article from Low End Mac (from Oct. 2007) titled "External $100 Sony DVD Burner Likes Macs"
http://www.lowendmac.com/ed/bgray/bg07/1010.html

Has anyone upgraded to iDVD 5 with Combo Drive & external disc burner

I have an iMac G5 with a combo drive. I have purchased a Lacie d2 drive to burn slide shows from iDVD. The Mac recognizes the Lacie on the firewire input but says under system utilities "Disc burning: not supported". I would upgrade to iDVD 5 if this will support an external disc burner. Any suggestions.

Apple pays for permission to burn DVD's (something about MPEG2). However, they don't pay for each copy of iDVD sold. They pay for each DVD burner sold. Thus, they don't allow burning to external DVD burners...officially. Under the File menu, choose "Save As Disk Image". Once you have the disk image, you can use the resulting Video TS and Audio TS to burn a DVD using Toast. A version of Toast or some other burning software should be included with your external burner. I hope this helps.
iMac G5 Mac OS X (10.4.3)

Optical drive won't burn: Macbook Pro after Mavericks update

I have just updated my OSX to Mavericks on my Macbook Pro, late I know but I was trying to avoid any software conflicts. My Optical Drive can't burn either CD or DVD. It plays them and recognises them but won't burn. Error message:
The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
I have tried compressed air, restarting, updating software and have looked through this forum for possible solutions but everything I've tried hasn't worked.
I burnt a DVD yesterday with no issue and then updated my OSX last night and know it won't work.
Please help, on the verge of a meltdown with a heavy deadline looming
V

The built-in camera shouldn't work in Image Capture which is for use with a photographic camera or a scanner. As for Skype you might check if you have the most recent version. If you do, then I would contact the developers about the problem. It's clear that the camera is working with Photo Booth and FaceTime. That suggests there is no problem with Mavericks.

My Combo drive won't eject & I've tried all the fixes on the support page.

The Beach Boys' "Pet Sounds" is stuck in my Combo drive. It does not show up on my desktop and will not eject.
I've tried:
- holding down the eject button while I start the machine
- holding down the trackpad button while I start the machine
- resetting the PRAM/NVRAM
- resetting the PMU
I've also changed my Prefs to recognize music cds (for some reason it was set to "ignore") and I've tried all of the above fixes with the power cord in AND out.
I've downloaded a support patch from '03 that was supposed to get at this very issue, but the installer tells me I don't need the update, and anyway the support site says that the patch won't install when there's a disk still stuck in the drive (which I'd guess makes it a bit of a useless patch for many people, at least on the first go-round).
I understand from some online forums that there are other ways to get at this - through the Terminal and through Open Firmware - but I haven't found any postings that step you through those solutions, and I'm not skilled enough to figure them out myself.
Can anyone tell me how to deal with this?
Thanks.
12-inch Powerbook G4 Mac OS X (10.4.6)

Update:
I found the instructions for the open-firmware fix on the Apple site (not sure why they don't link to this from the other support page. you think you've read everything they have to offer and then there's another solution floating out there on the site).
I tried it, and that did't work either. When I type in "eject cd" I get back the message
can't open EJECT device.
So.... I'm still looking.

External drive won't burn

I have an external Plextor PX-712UF CD-RR-RW+RW/DVD-R+R-RWRW. It plays CDs and DVDs fine but it won't burn CDs or DVDs on my G3 iMac It encounters an error at the beginning of the burning of the disk. It works on a G4 iMac that a family member has. I allow have a Que! Fire CD burner that works fine on the iMac G3. I am using OS X 10.3 and Toast 6 Lite.

Hi
What interface are you using to connect it?
That error code in Tiger is often related to the Finder, relaunching the Finder can fix it. In Panther though, I don't know if the same is true, can't hurt to try, however.
If you just purchased it, I would strongly recommend returning it for a drive from a vendor with a higher standard of Mac-support, such as LaCie, or a vendor such as OWC, that sells a variety of cased-drives.

External Drive won't burn DVD's

I have a Sony external DVD/CD burner attached to my G4 it is capable of burning all formats of DVD and CD. The System Profiler recognises it and tells me all the formats it will burn.
However when I put a blank DVD-R in to burn a disc image, it won't burn and it tells me it can't burn to this disc and to insert recordable media.
It's not the DVD's as they burn with no problems in my other G4, either disc image, iDVD, Toast etc though this one has a superdive.
Any thoughts on this?

Hi
What interface are you using to connect it?
That error code in Tiger is often related to the Finder, relaunching the Finder can fix it. In Panther though, I don't know if the same is true, can't hurt to try, however.
If you just purchased it, I would strongly recommend returning it for a drive from a vendor with a higher standard of Mac-support, such as LaCie, or a vendor such as OWC, that sells a variety of cased-drives.

Combo drive won't accept CDs or CD-R/CD-RWs

my iBook's combo drive suddenly would not accept CDs, CD-Rs, CD-RWs. it can't recognize the disk and automatically spits them out. it can't burn CD-Rs as well. it can only read DVD, DVD-Rs. why is this so?
is apple planning on solving this problem? and compensatin for those who have purchased the defective combo drives? any suggestions on what to do to solve the problem?
thanks.

Hi Michael,
Here is what Knowledge Base has to say (article).
I hope that helps,
Jon
PS If you have to bring it to an Apple Store, reserve a slot with a Mac Genius at your local Apple Store.
G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz iBook, Macintosh 128K, eMate... Mac OS X (10.4.2) Airport Express, Palm Zire 72, Minolta Dimage X31, iSight, and more

Combo drive won't burn cd

Similar Messages

Maybe you are looking for