Combo of Unsharp and "Film Bloom" layer creating transparency in nested sequence

I've run into a really specific glitch.
Applying these adjustment layers above a clip inside a nested sequence creates partial transparency of the nest clip in the main/master sequence. Inside the nested layer, no transparency of the video clip is created.
So above a video clip is:
1) Adjustment layer holding Fast Blur effect, with layer set to 10% opacity (and a Screen or Overlay blend mode, but even normal causes the issue).
2) Above that layer is another adjustment layer holding Unsharp Mask effect.
Within that sequence, everything is fine. However, when that sequence is nested in another sequence, the nested clip has a slight transparency (as though opacity were set to only 90% or 95%).
ONLY the combination of both of those effects together creates the unwanted transparency. Even regular Sharpen effect doesn't do it.
Anyone had this or a similar problem before?

I was afraid of that. Hoping I just had a bone-head setting wrong somewhere, but afraid I'd have to export, then import. That is a pita.
The camera is amazing. Been using it with my Canon lenses, and LOVING it! Waveform would be amazingly useful if I could change my iris without putting the lens on the 5D first! But with the Birger mount due out in April, it's going to be a fantastic piece of gear. Upgrading from the HVX200, there is just SUCH a huge jump in quality. I've been really happy.
Oh, and I haven't looked at the hair yet, but it's probably something from the effects I've added. I've stretched her legs about 4 inches and so have multiple layers there. I'll be sure to look more closely before I finish this up.
Thanks for all the responses. You guys are great!
Lawrence

Similar Messages

Copy and Past Nested Sequence loses link to Master

Has anyone else noticed this problem? I've got a nested sequence that I'm cutting and editing around and most of the time everything is fine. If I doubleclick the nested sequence in my main sequence, it opens the nested one and if I then double click the nested sequence in my Browser, it goes to that same sequence. Changed in one will show up in the other.
BUT, if I copy and paste the nested sequence in my main sequence, the new pasted version will open a NEW sequence that isnt linked to the Master in my Browser. So now, changes in the new nested sequence or the Master dont show up in the other one.
Is this just me thats having this problem?

I can see where you are coming from, and where the engineers at Apple were coming from, but I strongly disagree with this behavior. In my opinion, if you want to have a separate copy of a sequence, you should make a copy in your bin and bring that in. That way your new sequence HAS a master sequence and you can CHANGE the name, both of which help to avoid confusion.
So, maybe you're right and most people prefer it the way that it is, but let me explain the workflow I'm using and you'll see why this is so absolutely frustrating to me.
I'm editing a documentary in Chinese and as I dont speak Chinese, I've had it all translated, and added subtitles to the interview footage so I can edit it. And to make absolutely sure that the subtitles and footage stay in sync (since I wouldnt know it if they werent) I've put all the footage into separate sequences and I'm editing those sequences as if they are raw footage.
And due to this, I'm throwing sequences around every which way while I try to create my story. And sometimes that means copying a series of edits into a new timeline to work on separately from the larger project. And as I see it, there is NO WAY to do that currently and keep the sequences linked to the masters, other than pulling up each master sequence into the Viewer, changing the in and out points to match the clip I want and Inserting it into a new timeline. And when you want to copy over a segment that has perhaps 20 edited bits, thats WAY too much trouble.
So I'll admit that I'm editing in a somewhat abnormal way due to my subtitles, but as there is no way to copy and paste sequences and keep the link to the Master, I think the behavior is broken.
Oh, and the "Tools->Create Master Clips" command, which is supposed to relink clips to their masters if there are any in the Browser, doesnt work for Nested Sequences.

How to create new canvas at photoshop and apply a layer by layer name?

How to create new canvas at Photoshop and apply a layer by layer name ?
So simply what i want is
Create a new canvas certain size such as 150x40 pixels
Apply a layer to that canvas. Script will select the layer by layer name
How can i do that these 2 simple things with Photoshop scripting
CS6

JJMack wrote:
Something like var doc = app.documents.add(width, height, res);
When you write Apply a layer what do you mean Script will select layer by name. A new document will have a background layer or a normal layer do you want to rename that there is onle one layer. Or do you want to add a layer by name what kind?
thanks for answer. you know like background layer. for example when you are generating web buttons you are preparing background layers. it will select a layer like that.
also can you post full script here if possible ? thank you.
example : http://img12.imageshack.us/img12/844/examplepx.png
after this i will write a text on that canvas but i will ask that after learnt this 2 steps

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

Your file is most likely toast, but still:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What is the difference between combo dive (24x) and Double layer (8x) ???

Hi everyone,
I am helping my girlfriend to purchase a new Macbook, so I would like to know (I guess she) what is the difference between the combo drive (24x) and double layer (8x) divers? Although I have a Macbook Pro, I could not give to her an right answer about this simple question—what a shame!
Thanks,
M

From my P.O.V, being able to burn DVD's is a fairly standard feature these days and is very useful. I have the 2.4 and am very happy with it, i would always buy the best one can afford at the time as it goes out of date so quickly, so i would personally go for the 2.4, yes, but it depends on whether she thinks she is actually going to need that DVD burning facility.
REgards
Rowan

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Can I place a smart object and specify a layer comp?

I have many buttons, each as a layer comp, in a single file.
I do this because there are many common elements: layers for the button base, shared features, button gloss, etc.
What changes is the icon on the button, and possibly a supporting label.
I want to place these buttons on objects in other files.
So, I'd like to Place the file as a smart object AND SPECIFY THE LAYER COMP for the proper button.
Anybody?
Or maybe there is another approach?
Much obliged!
Dave

I'm on CC on a Mac.
What 21 is talking about is making some sense.
I am able to create new smart object via copy, then create a variation on the original file linked in the parent smart object. Then I save that from illustrator with a different file name. Then I go back to photoshop and replace contents of the new smart object, linking it to the newer illustrator file.
This gets around the problem, but it takes a few more steps than the same thing did it in earlier versions of photoshop.

Downloading the 10.6.8 Update Combo v1.1 and it seems stuck at "registering updated components". It's running but I've had "about a minute" left for 30 minutes now

Trying to download the 10.6.8 Update Combo v1.1 and it seems stuck at "Registering updated components". It's been saying it has "about a minute" left for at least a half hour. What do I do?

Try downloading it from the Apple site. Set Safari to download to the desk top:Safari preferences>general>save downloads to desktop. Download to desktop, and run the installer:
http://support.apple.com/kb/DL1399

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

STO and delivery is getting created in the foreground instead of background

Hi experts,
In return document (with reference to Work Order), When user is selecting recommended action u2018YAu2019 and clicking the u2018returnu2019 button, an STO and delivery is getting created in the foreground instead of generating them in background.
T-code - o3o_RT02
Test case
Create Work Order (IW31)
Create return document w.r.t Work Order (o3o_RT01)
Select recommended action u2018YAu2019, save and select u2018returnu2019 button.

Hi,
Could you checkthe foll cust link in SPRO:
Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders).
PO is created if you set the "*" for EITHER the purchasing group OR the product category.
SRM is creating PR or PO depending on:
- SRM customizing (ex: always external proc + PR if incomplete, PO if complete)
- the interpretation of SC data by R/3.
IF your SC is considered complete by SRM (but with a fixed vendor and not a preferred vendor) the system will check if it can create a PO in R/3.
For this, each item will request a META_INTERPRETE_DATA to R/3, asking if it can create a PO. If R/3 considers this data as incomplete, it will reply to create a PR.
Usual cases of R/3 PR creation instead of PO:
- prefered vendor in SRM (and not a fixed one)
- custom checks in user exits in R/3
- error messages in R/3 (ex: O6 334 In the case of a fixed vendor, please enter info record)
To debug without debuging into R/3, you can also try the following:
- use BADI DETERMINE_TARGET_OBJECT and force PO creation
- so the system will always try to create a PO
- R/3 won't create the PO (for the same reason as in META_INTERPRETE_DATA), and will raise an error in SRM
- finally you get the real error in application monitor (SC --> backend application errors
Related thread:
Re: PO not create from SC with source of supply in classic sena
BR,
Disha.
<b>Pls reward points for useful answers.</b>

I have an apple id and am trying to create an icloud however my phone is not allowing me. how can i create an icloud account?

i have an apple id and am trying to create an icloud account however my phone is not allowing me and saying that the number of free attempts have been exceeded even though this is my first attempt. how can i create an icloud account?

Are you sure the message isn't saying that the maximum number of accounts have already been created? When you get this message you will not be able to create another account on that device. Your only options are to either re-use one of the accounts previously created or create a new account using a different iOS device or Mac, if you have one.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created?

I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created? I tried exporting them, but it loses all info. Also, how do I move the quicktime movies from one iphoto library to another? They were exported as jpgs

Add both libraries to iPhoto Library Manager. Then select the events or albums that you want to copy from library A and drag them to library B in iPLM.
This video shows the process:
OT

HT2731 My daughters iPad has just been factory restored from the apple shop, she was on my iTunes account with her email address but now she is the correct age for her own account. We have started up the iPad and with trying to create her own with her own

My daughters iPad has just been factory restored from the apple shop, she was using my iTunes account with her email. When trying to create her own iTunes as she is the correct age it has come up that her email is already being used. How do we do this with he same email address

Hello spooner68,
Thank you for the details of the issue you are experiencing when trying to create an Apple ID for your daughter. Because her email address is associated with your Apple ID, you are receiving the message that the email address is in use.
To remedy this, you will have to first remove her email address from your account using steps 1-3 of the section titled "How to add an additional email address that is already associated with another Apple ID" in the article below and then attempt to create her Apple ID with her email address:
How to add an additional email address that is already associated with another Apple ID
If you have an email address that is already associated with another Apple ID, you may need to remove it from your other Apple ID before you can add it to your preferred Apple ID.
Sign in to My Apple ID with the Apple ID that has the email address already associated with it.
Find the email address that you want to move to your preferred Apple ID, then click Delete.
Click Save Changes, then click Sign Out at the top of the page.
You can find the full article here:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

Combo of Unsharp and "Film Bloom" layer creating transparency in nested sequence

Similar Messages

Maybe you are looking for