ComboDrive - CDs suddenly won't mount but DVDs will, after updates
I have a 15" 1.5Ghz Powerbook, have had it for a year and a half and still have Applecare on it. All was working fine and dandy until I made the big mistake of doing a small software update - which updated Safari to 1.3.2 i think, iTunes from 6.0.1 to 6.0.2, and another thing called "Powerbook Aluminium" which apparently had something to do with the battery life counter. Anyway, subsequently to that (today), every CD that I put in the drive either gets spat out again, fails to eject or just doesn't mount. Not music not data not nothing. DVDs still work fine however, i've watched a film and inserted the Apple DVDs.
So now I'm confused... if DVDs still work is the drive broken? Or do I need to put in new drivers or what. This is just frustrating as I listen to all of my CDs on my powerbook. I had an Audio CD in during the update which then could not be seen afterwards. Any clues?
Thanks
CDs and DVDs use 2 different optical subsystem: It may happen that the CD part dies while the DVD part keeps working fine.
If you dare to, you might try to clean the drive's lenses with compressed air - standard lens cleaner disks can't be used on slot in drives.
Similar Messages
-
External hard drive suddenly won't mount, but shows in Disk Utility.
Running OS 10.6.8... Disk Utility sees it and there's no issues when verified or repaired. The partition is grayed out and won't mount through Disk Utility. I've also tried mounting via Terminal, but same result. I've connected other drives, so I know it's not the wires or ports. When I turn the power on, it spins up and seems to be working properly. I don't have another mac to test it on. Any ideas would be greatly appreciated.
Here's the info from Disk Utility:
Name : BACKUP
Type : Volume
Disk Identifier : disk1s10
Mount Point : Not mounted
File System : Mac OS Extended (Journaled)
Connection Bus : FireWire
Device Tree : IODeviceTree:/PCI0@0/RP05@1C,4/FWBR@0/FRWR@0/node@30e0f4e010a9d6/sbp-2@c000
Writable : Yes
Universal Unique Identifier : C3BC8998-F686-3A0F-A1AF-11260799EABA
Capacity : 319.94 GB (319,937,773,568 Bytes)
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : No
Disk Number : 1
Partition Number : 10You don't have a PowerMac if you have a Mac Pro. You don't have a PowerMac if you have Mac OS X 10.6. PowerMac is the name for the desktop professional Macs prior to mid-2006. Two possibilities, the drive is dead, or the drive has a bad directory. For a fee you can isolate either on my FAQ*:
http://www.macmaps.com/directoryfaq.html
* Links to some of my pages may give me compensation. -
MacBook Pro won't mount *2nd* DVD until after reboot.
MacBookPro5,1, Intel Core 2 Duo, 2.53 GHz, 4G ram, Mac OS 10.6.8
This MacBook Pro will not mount more than 1 DVD without a reboot in between discs!
These are commercial movie DVD's in excellent condition.
I can mount and watch one commercial DVD with no problems, but when I eject that disc after viewing and insert another commercial disc, it will not mount. I can hear the drive spin up, then spin down, then spin up again, etc... eventually the Finder takes over and says that I've inserted a blank disc and do I want to ininialize?
Eject command does not work while this spin up/spin down loop is occurring. If I Shut Down before the Finder finally recognizes there's a disc in trouble, then reboot and hold the trackpad button, the disc will eject. If I then trash all DVD preferences, the disc will mount and eject on command.
Inserting another disc will result in failure to mount! Etc...
Any ideas?I should have updated this ages ago. Sorry.
The solution to the problem was to remove the DVD drive, take the cover off it and clean the lens in the reader mechanism. Just Google up the disassembly directions for your particular Mac model.
Downhillracer1's solution, compressed air blown in through the disc slot is certainly easier and might do the trick if all you've got is a spec of dust on the lens, but if it's a problem with some kind of film deposited, opening it up and cleaning the lens is more thorough.
My DVD drive now reads and burns with no problem. -
External hard drive suddenly won't mount
Although I've not had a problem with this drive in the past, it all of a sudden won't mount. It has all my music on and stalled while I was using iTunes, the timer wheel came up and was still the same after 20 minutes so I closed down. Now the drive won't mount at all so I can't even try repairing the disk. I've tried swapping from firewire to USB cables and also going through a hub, neither have worked.
It's a Lacie and the power light stays continuously orange on it and it feels like it's working overtime.
PLEASE HELP!A little bit more on this... I looked at the instructions for the Lacie and it said that some smaller laptops may require a power cable via a USB port and back into the Lacie, which now works but I'm wondering why this has happened all of a sudden and can I rectify it??
I've deleted a load of stuff off my ibook hard drive, like photos etc, thinking that would help but it hasn't. Plus, I've recently installed an extra 1gb power card.
What can I do to avoid having to plug all these peripherals in to access my music? -
LaCie External Harddrive suddenly won't mount via Firewire 400 or 800
My LaCie External d2 Quadra suddenly won't mount via Firewire 400 or 800, but will mount via USB 2.0.
I have:
Tested the harddrive on another computer and it works fine via firewire.
Shut down and re-boot. It had no effect.
Updated all software.
Note: My MBP will not boot if the Firewire 800 cable is connected.I've had a whole heap of strife with my two macally enclosures over FW. I've only got them working twice together, regardless of jumper settings on the harddrives. I can plug either in fine, but if I use both together, my mac shuts down and refuses to boot. One drive is bus powered, the other is powered via the mains
I wish you luck -
Lacie external hard drive suddenly won't mount on iMac 27"
Help! My back up Lacie suddenly won't mount. It shows up on my disk utility (but faded) and I tried to repair it with no benefit. I thought it might be a Lion problem, but my other Lacie is working fine. I tried using a different USB cable and unplugging everything, rebooting etc. Any help would be much appreciated.
There may be hardware problem with the drive. However you can try resetting the SMC. Don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
My external hard drive suddenly won't mount.
I have a mac 0sx version 10.5.8. My WD hard drive suddenly won't mount. Tried running a repair with disc utility-no luck.
Your best bet is DiskWarrior...
http://www.alsoft.com/DiskWarrior/ -
Firefox won't work but Safari will???
Firefox won't work but Safari will?
Firefox was already loaded on my macbook pro but won't work??Firefox doesn't come preloaded on new Mac's.
So you must have gotten this machine used and the person set up Firefox with a proxy amongst other "tweaks" that your not aware of, possibly even remote access to your machine.
If this is a used machine you bought, ideally it would be best to backup any files you have to a external drive, c boot off the installer disk the other person should have given you and use Disk Utility > Erase > Zero and format the drive HFS+ Journaled. Quit and install OS X and start with a fresh machine.
If you don't have the disk, a $29 Snow Leopard install disk is avaialble from Apple (no iLife programs, sold seperatly) which you can do the same as above.
If you don't want to do this, then delete Firefox and it's Library > Application Support > Firefox folder and reinstall it fresh from Mozilla.
Just reinstalling Firefox alone doesn't work, the support files need to be trashed as well. -
My Mac won't mount my external HDD after installing Lion - What can I do?
My Mac won't mount my external HDD after installing Lion - What can I do?
HDD: Verbatim 3.5'' External HDD eSATA & USB 2.0 #48802
I can not find it in Disc Utilities - so I can not repair it.
I also haven't found any Driver for the HDD to do an update.
My Mac is running on the most recent updates of OS Lion.
The HDD worked before. It contains my former Time-Mashine Backups. I would like to use this drive again. It isn't very old yet.
It would be much appreciated if anyone could help.
Cheers,
YvesOK, try restarting in Safe Mode and if that doesn't work try resetting the SMC and PRAM.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software. Is there a bug in the iPod program?
If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
I have an iPod 2nd gen . I have been trying to get an update to the software, but it will not update. Current version is 4.2.1 Trying to update it so I can use facebook on it, but with this version facebook will not work. Can someone help with this please.
Ipod touch 2 g does not go above ios 4.2.1 and the facebook update needs 4.3 , so there is no way to update the app.
-
My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1
My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?
Hi AEEA-Family,
I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
I've just made the following changes on my Phone and all seems ok again.
Here are the steps I took to resolve it on my phone.
1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
After I made all those changes I did a hard restart of the phone and now all seems fine.
I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
Hope this helps other people. -
I can load cs5 in my new PC with windows 8.1, but it will not update. how can I update?
You can direct download and install the updates here: Adobe - Photoshop : For Windows
The updater for CS5 is well...outdated.
Gene -
Anyone having issues syncing iPhone 3GS with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.
I'm glad to hear that I'm not the only person struggling with exact issue. I've rebooted, upgraded, re-installed, pulled all my hair out as nothing works.
The biggest dissapointment with this thread is that nobody seems to have responded with a solution.
And yes I've managed to pull together enough intellegence to tick the box "sync to outlook" in iTunes - still nothing man.
Definately does not sync from phone to PC and is very hit and miss on PC to Phone. In other words now running 2 seperate calendars - Not helpful Jan. -
I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?
Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.
Maybe you are looking for
-
Assign records to different remote systems in MDM
Hello Experts, I am using qualified range to generate internal number range for vendor. The remote key & remote system details for the records are generated during syndication. My scenario is that I have couple of records in MDM for different remote
-
My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password that it keeps prompting me to give, as it is a wireless printer and that info was not required when we set up the printer. I have checked all diagnostics and c
-
Need to no if a tv can be hooked up by hdmi from a beat all in 1 computer
HP Beats Special Edition 23-n010 All-in-One Desktop PC trying to hook my flat screen tv through the hdmi cable from the computer to the tv using the tv as a second monitor. games like x-box and ps3 hook into the monitor and work fine. Its going out t
-
ICloud backup iOS 8.1 - failing to backup
Since updating iOS to 8.1 yesterday, my iPhone 6 and my iPad retina mini are both failing to make iCloud backups. Either manually or automatically when powered and idle. I have loads of space on iCloud so that is not the issue. Tried deleting existin
-
I have tried the suggestions that i have found in previous discussions (disabling addins in outlook tools and resetting the sync history in itunes) with no joy. Am reluctant to 'replace calendar' from outlook to iphone as I sync both ways (outlook to