Comcast account - what Port number should I have ?

Hello,
I have a big issue with my mail staying "online" when trying to scan for new mail. I have Comcast mail account and my Port number is set to "25". I know many of you who have Comcast have same issue but right now my mail keeps scanning (for over 15 min) but not connecting at all...
Is my Port correct???
Any help will be highly appreciated.
Thank you.

I haven't tried that yet but at this time I've tried few different tips and sometimes I get connections and sometimes I don't. It's as if the email had a mind of its own... seriously. Sometimes I get exclamation points, sometimes spinning circles, and sometimes nothing (which is good). Every time I click on "Get Mail" I get different results. I know it's MAc and Comcast problem but I want things working like they did before... I'll try your tip of changing outgoing port number. But either way, outgoing port change should not help me because it's the "incoming" port that messes up. I can actually SEND an email to an account that shows it's offline - I just cannot receive it.

Similar Messages

What port number is used for SMTP outgoing mail with AOL?

I inadvertently changed the port number for SMTP outgoing mail of AOL. What port number should I use?

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

Which port number should be entered to create an icloud email account?

Which port number should be entered to create an icloud email account?

You do not have to use any port number. Just go to System Preferences on your Mac and click on iCloud (OS X 10.7.5 and later).

How can I find out what port number my DB is using

How would one find out what port number a database is using? Is there a SQL command that will allow us to do this?
Thanks,
oracle_newbie

newbie
Oracle databse assigns a dynamic port number for each established session. Usually, the common port is 1521 which is defined in you tnsnames.ora, however, this is used for requesting a dynamic port. Dynamic ports are within a ragne of 1000+. That's why it is hard to tell which port you are using at a certain time. You should have a network monitoring tool to check this accurately.
Regards
null

I would like to move 2 users to creative cloud, but maintain all the other users (myself included) on CS5. Can I still get the reduced monthly rate? What serial number should I use?

I would like to move 2 users to creative cloud, but maintain all the other users (myself included) on CS5. Can I still get the reduced monthly rate? What serial number should I use?

Hi Thomasjewell,
Yes you can avail the discounted prices even you are upgrading the product just for two users. You can use the serial number for your Creative Suite 5 product.
You can follow the link: https://creative.adobe.com/plans in order to purchase Creative Cloud for Teams product.
Let me know if it works or not.
Thanks,
Ratandeep Arora

What mail app. should I have with OSX 10.6.8

What mail app. should I have with OSX 10.6.8

Incidentally, the mail version is tied to the OS you are using (10.6.8) in your case. You can always check by running software update.

What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

Dear All,
My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
I will deny this port on personal firewall each client.
Thank you for your advise.

Hi,
I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
I hope that helps some.
Kind regards
Ben

What port number I have to give in connection settings of MI client

Hi all,
I installed mobile client and in the connection settings it is asking for a port number.Which port umber of MI 7.1 server i have to give here?
thanks and regards,
rajesh
Edited by: Rajesh A on May 8, 2009 1:48 PM
Edited by: Rajesh A on May 8, 2009 1:57 PM

Hi Rajesh,
You need to give the http port of DOE server.
TCODE : sicf >execute>in the menu "goto"->port information -->whtever is mentioned in service column will give you the port number for DOE server correponding to each host.
Regards,
Liji

What port number to use with NTRealm

When I configured the NTRealm in the WLS console, the documentation mentioned that for NT Domain, I was supposed to provide the "name" and "port" values for the PDC machine. I gave the name of the machine on that field, but did not know what to specifiy as the "port" value. Now, when I run the "java weblogic.security.ntrealm.NTRealm..." command, I get an "Unable to adjust token privileges" exception, below which there is another exception with the words "bad domain name" in it.
That leads me to believe that its not liking the DNS name of the PDC server that I entered earlier. Can someone tell me what is this "port" value that is referred to in the docs?
Thanks.

You shouldn't have to enter a port number for the PDC. Could you point out
in the documentation where you saw this.
It should only be:
java weblogic.security.ntrealm.NTRealm user password your_PDC
Are you sure you are logged into your domain? Is that user part of the
domain? If you use an admin account for the PDC does it work?
Patrick
"Nadeem" <[email protected]> wrote in message
news:3cd96658$[email protected]..
When I configured the NTRealm in the WLS console, the documentationmentioned that for NT Domain, I was supposed to provide the "name" and
"port" values for the PDC machine. I gave the name of the machine on that
field, but did not know what to specifiy as the "port" value. Now, when I
run the "java weblogic.security.ntrealm.NTRealm..." command, I get an
"Unable to adjust token privileges" exception, below which there is another
exception with the words "bad domain name" in it.
>
That leads me to believe that its not liking the DNS name of the PDCserver that I entered earlier. Can someone tell me what is this "port"
value that is referred to in the docs?
>
Thanks.

2006/2007 MacPro 2.66GH Intel Xeon. What version EFI should it have?

I have a 2006/2006 2.66GH Intel Zeon MacPro. This version MacPro came with a 32 bit EFI firmware. After having a new video card iunstalled at the Apple Store I found that my MacPro would no longer recognize bootable FW800 external drives or my eSATA external drives during an OPTION boot. This function had worked perfectly before I had the video card switched out. My FW800 drive DO show up on the desktop after boot and are accesssable... I just can no longer boot up my bootable SuperDuper backups as I had been able to prior to the video card switch.
My thinking is that the technician thought he was doing me a favor and upgraded my machine to the latest 64 bit EFI ... While the machine works fine my bootable backups are useless.
What version EFI SHOULD this machine have and how do I check the version to see if I am correct? If this IS the case how can I restore the original firmware?
Thanks....

Here is some information for you.
You don't even say what video card. And the EFI in your sysem 1,1 or 2,1 isn't going to change into UEFI 2.x instead of 1.1 (which was developed in 2005, and doesn't have room to be flased to, nor would the motherboard be happy).
The rest, if you bought a card from Apple like ATI 5770 is not from having a new card.
That card requjres 10.6.4-1/2 or later, meaning you won't have a 10.6.5 DVD to boot from and can't use older DVDs. Or clones. You need to find a way to update your backups.
In the past I could run a combo update against clones while booted from another drive. Last time I tried that, seems 10.6.x made that impossible, and harder to apply and test.
Only 2008 Mac Pro and later have the EFI64/UEFI (2.x) - that supports things like Nvidia GTX 285. There were two versions of Nvidia 8800GT (1st gen EFI32, and 2008+). ATI cards work in all Mac Pro models - as long as the OS has the proper minimum build..

What port type should i use?

I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System.
Please help me
what should port type I need to use? Should it be file port or t-rfc port?
What should partner type need to use? Can it be LS type?
Is it ALE or EDI Scenario?
Thanks in advance.

Hi,
Yes, the Port can be a File Port (IDocs will be saved in this folder) or t-rfc port. File port should be OK.
Partner Type can be LS.
Cheers,
Bhanu

What line speed should I have (about)

I understand there are many things that can change line speed. (Noise on line, Distance from exchange, line quality, internal wiring ect....)
What sort of speeds 'should' i get with these router stats? My guess is around 3 to 4 Mbps
Connection information
Downstream
1,408 Kbps
Upstream
448 Kbps
ADSL settings
Latency type
Interleaved
Noise margin (Down/Up)
6.4 dB / 21.0 dB
Line attenuation (Down/Up)
49.0 dB / 27.0 dB
Output power (Down/Up)
15.8 dBm / 11.9 dBm
Solved!
Go to Solution.

Nope. I have an old circular (with a weird finger tighten screw in the middle) box outside my house where 2 lines connect to from different parts of the house (Was done by the telephone company back in the 70's I think and The 2nd we don't use) and from there it goes into the attic and then down into the hallway into our main NTE5. I have no connection issues and sync at 8128kbps.
That wouldn't explain your connection slowdown though because I believe if it's the box which is causing the problem then it will simply higher your attenuation as well as lowering your speed.
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

I have an IPhone 4,with IOS 4.2.6. I just got an iPad which has an IOS 5.1.1. I want to update my IOS on the phone but the computer I use no longer has Internet access. How can I update my phone? Also, what iTunes version should I have for the updated IOS

I have an iPhone 4 with IOS 4.2.6. I recently received an iPad with IOS5.1.1. I want to update my IOS on my phone but the computer I use is no longer hooked up to the Internet. What do I need to do? Also, does my iTunes need to be updated? It is whatever was available last July. Thank you for your time and courtesy!

To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

Which type of Skype number should I have??

Hi,
I would like to know if it is possible to call Danish numbers from a Skype number, on a mobile phone with an Italian sim card inside - without being connected to the internet..?
I've already created a Skype number - and used it via my Italian mobile phone, when I was connected to the internet - but I need to be able to use it also when I'm not connected to the internet.. -And I need to be able to use it to call telephone numbers that I have not already registered beforehand (and as far as I understand the Skype To Go-set up, you need to do that for this solution, right?). Is there another solution for me??
I hope somebody is able to help me as soon as possible..
Thank you.
Julie.

Ooops, my bad, so there are only two different options? And they are both 512MB? I don't really see anything that says 512MB of VRAM or anything for the Radeon. ATI is now owned by AMD. It seems they may just discontinue Mac support. I don't want be stuck with another unsupported card. Last time was with the VooDoo 64MB card that came out for Mac when I had a G3. 3DFX went out of business shortly after.
Quadro 4500 FX and the ATI Radeon X1900 XT? Both are 512MB, is one brand better than the other? Is there anything bigger? I have recently read a lot of reviews of the Radeon cards over heating. I would like to get something better if possible and prepare to not have to upgrade again so soon. Also nVidia has these other Quadros on this page:
http://www.nvidia.com/page/qfx_uhe.html
Are none of the others in this list compatible? They are all PCIe. Is it just because there are no drivers?

What manual settings should I have for indoor sports?

I have a Powershot SX500 IS. I would like to take good pictures of indoor sporting event, for example Volleyball. What would be the best setting as far as F-stop, Shutter Speed for decent action shots?
Solved!
Go to Solution.

The short answer: open up your aperture all the way, bump up your ISO as far as you're willing to take it (Is 1600 ok on that camera?), and then as fast a shutter speed as exposure allows. Don't zoom in too far.
Long answer:
It depends.
Are you trying to completely freeze the motion? Or would you like perhaps a bit, like the hand of someone spiking a ball to show the movement? Maybe you want a lot, use a slow shutter speed and pan as a car goes by. You need to decide this ahead of time.
Everything else will be some give and take. Usually shooting indoors means pushing the limits of your camera, and yours is no exception. There are many different ways to do it, but here’s how I’d go about it:
I’d select the lens I want (not applicable to you) given the situation. Keep in mind that longer lenses require faster shutter speeds for sharp photos.
I’d set my aperture for my needs. Is it a lot of fast action and I want to make sure I get the shot? I’d go more middle of the road (f/5.6 – 8) to make sure I get my subject sharp. If it’s slower or I’m not worried about getting every shot I usually open it up as far as I’m comfortable with for that lens. I prefer how it looks, and since I’m indoors it gives me all the light I can.
I usually want a bit of movement (tires on a bike, tip of a baseball bat, hand of volleyball player, …) to give some life to my photos, so I’ll start around 1/200 or so and adjust from there depending on what I’m shooting.
Then I’ll just set my ISO for my exposure. If that requires too high an ISO for my liking, I make compromises, open up the shutter a bit, or lower the speed a bit.
This is a cyclic process, I’m constantly going over this as I shoot. If I decide I want a bit more motion then I’ll bring my shutter speed down, knowing that I can bump my ISO down a bit too for cleaner photos. Not enough depth of field? I adjust, and know that it’s going to cost me in ISO.

Comcast account - what Port number should I have ?

Similar Messages

Maybe you are looking for