Comcast (or Xfinitiy...fancy name for same garbage) cable service is AWFUL.

Anyone else unable to play On-Demand whenever you want to? This service is so unreliable - whenver we choose to use On-Demand, we get "unable to process your request, please try again later". I can't tell you how many times I've heard that. I'm still trying again. The only way they are able to get away with such garbage service is by being the only game in town. I am amazed that we still live in a world where monopoly players provide garbage service. If there was full competition we would not be dealing with this. To make matters worse, Comcast continues to raise their prices. If I had a reasonble alternative I would switch in a heartbeat. I'm so ready to cut the cord and be done with these idiots. This is the sort of thing to post on YELP, but these morons don't care because there's no other alternative.

I have this issue ALL the time lately too! They tell me it means that there is a poor internet signal coming into the house. We had a tech out that checked and confirmed that... now we are just waiting to have someone else out to fix the problem. Maybe that is the issue for you too? Still very frustrating!

Similar Messages

Engineering and Manufacturing Org has different name for same item

Dear All,
I have an Engineering department generally Create items and configure bills, routings then, transfer all to Manufacturing org.
My client has typical requirement as follows...
Engineering and manufacturing department has different name for same item.
Eg: Item A in Manufacturing org may be called as Item AA in Engg org. I have to maintain 2 names for same item. How to map this requirement in R12.
Regards,
Saravanan

Can oyu not make it an organization level item and specify the proce there instead of keeping it a master level item?
Regards,
Utsav.

Network drive volume name for same folder by multiple users

I am using a 1TB USB hard disk attached to a ASUS RT-AC68U wireless router as network drive. There are multiple user accounts created on the same MacBook Air and they need to access the same folders on the network drive. For example, we have folder called "iTunes" created on the network drive.
The following steps resulted in some problems encountered.
Step 1: When user1 mounts the iTunes folder as a network drive, the general info shows:
General:
Kind: Volume
Server: smb://rt-ac68u/iTunes
Name & Extensions:
iTunes
Step 2: When user2 mounts the same iTunes folder as a network drive, the general info shows:
General:
Kind: Volume
Server: smb://rt-ac68u/iTunes
Name & Extensions:
iTunes-1
Question: Why does OS X assign "iTunes-1" as the name of the same network folder on the network drive for user2? Is there a way to retain the same original folder name for user1 and user2, such as "iTunes", so that it can be access as "/Volumes/iTunes" by both these users?

tastyrico wrote:
Hi Drew,
Thanks for the recommendations. They are useful tips to have in the arsenal, thanks. However, the preferences discussed are intended for directly attached external hard disks and the specific discussion was to make it available to the network on a Mac that is powered up with no user logged in (like a OS X Server but user still need to log in).
That's correct, I'm sorry I am wrong.
I do remember another defaults write option for detaching network drives on 'switch to loginwindow' because I needed the same thing - eventually I gave up & disabled fast user switching, it reduced the amount of issues for the clients. Sorry for confusing the two.
Have you considered mounting it via a startup script. At the moment it is failing because the path exists when User2 mounts it. If you try a script (at the level of the system) it should mount only once. Obviously sticking usernames & passwords into a script is not the best for security.
I think this issue is what NFS mounts can overcome, but I haven't used them for so long. They should be able to mount with no user interaction, but they are less flexible with permissions IIRC.
If your NAS supports NFS look at that, I think you both need to remove the user as the agent that mounts the disk. If the OS does it once (& permissions are correct) it should remove the 'diskname-1' issue.
When it works you end up with volumes in /Network/diskname.
I don't have a good place to start with NFS, so take a look around here…
https://discussions.apple.com/thread/4144999
@ElisabethBraut, do you get this error form MS…
http://support.microsoft.com/kb/2712085
MS apps fall apart when you have disks mounted like this, it's a consequence of MS apps using an older way to represent filepaths.

How to find ContentDb Name for any of the service application (e.g. User profile , Managed metadata , etc) programmatically in a farm ?

Hi,
I have a application where i need to display Name for all the service application. Specifically i need to get the size of user profile service application and Managed metadata service application name.
Please guide me. :)
Thanks and Regards:
Sanjay

You can use
http://blogs.technet.com/b/tothesharepoint/archive/2011/12/19/find-active-databases-used-by-sharepoint-server-2010.aspx
Get-SPDatabase | Sort-Object disksizerequired -desc | Format-Table Name”
http://webcache.googleusercontent.com/search?q=cache:kMHQXNGmjcwJ:sharepointstruggle.blogspot.com/2011/08/programmatically-enumerating-databases.html+&cd=1&hl=en&ct=clnk&gl=in
using(SPSitesite
= newSPSite(url))
using(SPWebweb
= site.OpenWeb())
SPFarmf
= site.WebApplication.Farm;
foreach(SPDatabaseServices
inf.Services.OfType<SPDatabaseService>())
Console.WriteLine(string.Format("Found
Database service {0} of type {1}",
s.Name, s.GetType().Name));
foreach(SPDatabaseServiceInstancespdsi
ins.Instances)
Console.WriteLine(string.Format("|-Found
Database Service Instance {0} ({1})",
spdsi.DisplayName, spdsi.Name));
foreach(SPDatabasespdb
inspdsi.Databases)
Console.WriteLine(
string.Format(" |-DB: {0}\r\n |-TYPE: {1}\r\n
|-HOST: {2} ",
spdb.Name.Length
> 70? spdb.Name.Substring(0,
65)
+ "...": spdb.Name,
spdb.GetType().Name, spdb.Server.Name)
http://social.msdn.microsoft.com/Forums/en-US/61e4e56e-e373-4167-ba97-e0f411feefe9/how-can-we-programmatically-find-the-names-of-sharepoint-databases

Short Name for same user results in different service authorization

New to Mac Server. Not new to Unix, command line, or sys admin.
I have a Mini Server, with two users; me and my wife.
Both Accounts have two short names each: Initals+Lastname, and First Name only
With iChat on the server, my account can login using both short names.
Her account can only login to iChat using the Initals+Lastname, not First Name.
Actually her account can log in to iChat using any variation of short names (I've added extra ones), but not the short name of just her first name.
Both users have identical permissions everywhere I can see, both are authorized for iChat.
The short name works if I remove permissions on iChat (I don't want to do this)
Both users are OD users, not local. I only have an admin account for local access.
Here is a snippet of the Jabber log:
jabberd/c2s[40845]: [11] SASL authentication succeeded: mechanism=DIGEST-MD5; authzid=[email protected], TLS negotiated
jabberd/c2s[40845]: odauth_check_servicemembership: checking user "kaarinas" access for service "chat"
jabberd/c2s[40845]: odauth_check_servicemembership: mbrcheck_servicemembership returned 0
jabberd/c2s[40845]: odauth_check_servicemembership: user "kaarinas" is authorized to access service "chat"
jabberd/c2s[40845]: [11] SASL authentication succeeded: mechanism=DIGEST-MD5; authzid=[email protected], TLS negotiated
jabberd/c2s[40845]: odauth_check_servicemembership: checking user "kaarina" access for service "chat"
jabberd/c2s[40845]: odauth_check_servicemembership: mbrcheck_servicemembership returned 0
jabberd/c2s[40845]: odauth_check_servicemembership: user "kaarina" is not authorized to access service "chat"
I'm stumped as to why one short name would work, the other not. Looking for hints on how to hunt down and solve the problem.

This isn't working for me. There was never a local "intern2" account, but I deleted the one in the ldap anyway, made and removed the local intern2 account. I then remade the intern2 account in the ldap directory(which increased the uid), rebooted the server, and the error remains the same as what you report.
Jun 8 13:36:00 server jabberd/c2s[212]: od_auth_check_service_membership: user "intern2" is not authorized to access service "chat"
There are 12 other accounts connected just fine. The issue is with this new intern account only.
Server 10.6.6.

Merging to names for same Apple account ?

I have a email address [email protected] that i used before icloud came out. This was my Apple ID. After they came out with iCloud i created a new ID [email protected], which is added in my iPhone Mail. I can login into my iTunes/Online Account/iCloud with any one of these two ID and i am taken into the same account. So it is basicall the same account with two names (i think). On my iPhone i have setup iCloud. The problem is when i send any email it shows me a list of outgoing email servers to select. My [email protected] shows up from hotmail and my Apple ID also shows up as [email protected] (for my iCloud). How do i change the one from Apple to say [email protected] so i don't get confused which mailbox i am sending mail from.
Thanks

I'm not exactly sure that this is what you want, however you can change the name of your mail account from settings> mail, contacts, calendars, then select the account you want to change, then select the account name at the top of the page, the name of the account as you see it on your iPhone can be changed under the description settings.

Autotyping not preserving XML element names for use in Web service

I am trying to generate a web service from an existing WSDL (ServiceOrderingContract.wsdl,
attached). The WSDL contains as a message part with an element dsl_FirmOrderProvideRequest.
Autotyping produces a corresponding class DSLFirmOrderProvideRequest. I use the
output of autotyping to implement a web service corresponding to this WSDL. I
then deploy this web service. The WSDL of the DEPLOYED webservice now has a message
part with an element DSLFirmOrderProvideRequest, per the autotype, but in mismatch
with the source WSDL. Of course, the clientgen from the source WSDL wont work
against the latter deployed WSDL.
Something is changing dsl_ to DSL in the autotyping process. Is this a bug? Or
am I doing something wrong? Is there any option in autotype task to preserve element
names?
Thanks a lot.

Hello,
Take a look at the docs on roundtripping generated data types [1]
Regards,
Bruce
[1]
http://edocs.bea.com/wls/docs81/webserv/assemble.html#1074725
Suteertha wrote:
>
This is in basic WLS 8.1 SP2.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

How can i give 2 different names for the same attribute in querypannelVC

Hi
I have a View criteria and exposing as a query panel.In the VC, we are using one VO attribute instance twice"FullName".We have a requirement of display 2 different names for this attribute in the query panel Ui.Attached the VC screenshot.
Ex:Present in the Query panel Ui fields are displaying like
FullName
FullName
Requirement:
Owner
Assignee
Thanks in Advance,
Naga

Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

I want to use the same name for my icloud email address as my .mac name

My name for all of my yahoo, gmail, .mac email accounts are al the same. I'd like to use the same name for my icloud account. It tells me that the name is not available but I'm pretty sure no one else would have chosen it. Is the fact that I've used it for my .mac email address somehow blocking it's availability? Please help. Thanks.

There is some confusion in my mind about your post. Let me describe what I think you mean, let us know if I misunderstood...
I'm assuming you already have an Apple ID that you used to define an iCloud account (or an older dot mac account), and the iCloud account has "[email protected]" as its email address. But the Apple ID for this account is not the same as the email address I just listed, perhaps your apple ID is something like "xyz@???.com" and what you want is to use the ID, "mySpecialName@???.com". [the "???" could be mac, icloud, or something else]
If I've got it right so far, then when creating a **new** Apple ID, you must now use @icloud.com. If you are trying to define "[email protected]", then that is the problem - "mySpecialName" is already associated with @icloud.com, because your current @mac.com also has [email protected] as an alias, so that name is no longer available.
Also, you cannot change the current ID from "xyz" to "mySpecialName" on an existing account. So either way, you can't get the ID that you desire.
Let us know if this is not what you mean.

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

How to create Same file names for source and target.

hi
Can any body send Procedure for below requirement.
how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
Please help me.
Thanks

Hi,
See the below link
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
Regards
Chilla

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

Comcast (or Xfinitiy...fancy name for same garbage) cable service is AWFUL.

Similar Messages

Maybe you are looking for