Come back to screen
Hi All,
I am using a program which contains screen.
i have created Selection screen as we do for normal report.In start-of-selection i am calling screen1.
When i press back button in screen1 it should come to my selection screen.
I am using Leave to screen 0.but this is not working.Bcoz i have 5 screens and when i came back from screen2 to screen1 and when i press back in screen1 it is going to screen2 again.
Please dont suggest me to create selection screen as screen.
Thanks in advance....
Hi Madan
use LEAVE TO SCREEN 0.
i just checked it.
DATA : ok_code TYPE sy-ucomm.
PARAMETERS : matnr TYPE matnr.
START-OF-SELECTION.
IF matnr IS NOT INITIAL.
CALL SCREEN 100.
ENDIF.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'AA'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Regards
Ram
Edited by: ramchander krishnamraju on Dec 15, 2008 11:00 AM
Similar Messages
-
hi, looks like I have a cache problem,
in ical I can't remove , delete a calendar. after 30 secs it comes back on screen. same happens with old , passed ical alarms.
i deleted the ical cache User/library/ical, however did not solve the problem>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over). -
Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
Console does not comes back to life after screen blanking
edited post on 2014-07-13:
This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
It is a screen blanking on the console triggered by a timeout in the kernel.
It can be modified (or disabled) with the setterm command for the current session.
The issue is still unresolved since the console doesn't comes back to life after hitting a key.
See post#6 on 2014-07-13 for further details.
Changed title accordingly.
original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
- arch x86_64 fully updated up to 07-JULY-2014
- xf86-video-ati open source driver installed
- no (additional; ie: explicitly) installed power management packages such as pm-utils
- no X installed
The problem:
• hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
• however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
• the backlight state is not restored on the resume sequence (first thought)
• the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
The testing sequence (with related entries on included dmesg output):
- typed timedatectl ... showing 23.29.04
- now allowing idle time for the machine to suspend
- suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
- after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
- after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
- after 30 seconds opening the lid ... tag it as event2#2
- now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
... event#1-1 ... suspend starts here:
[Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
... event#1-2 ... resume from suspend should show some entries here:
no entries at all
And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
... event#2-1 ... hibernation starts here:
[Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
... event#2-2 ... coming back from hibernation (I think) starts here:
[Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
[Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
Why isn't working then ?
Because the signal to enter suspend mode is never sent/received by the OS ?
Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
https://bbs.archlinux.org/viewtopic.php?id=183580
Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
[Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
[Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
[Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
[Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
[Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
[Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
[Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
[Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
[Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
[Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
[Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
[Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
[Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
[Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
[Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
[Mon Jul 7 22:52:56 2014] 2 disabled
[Mon Jul 7 22:52:56 2014] 3 disabled
[Mon Jul 7 22:52:56 2014] 4 disabled
[Mon Jul 7 22:52:56 2014] 5 disabled
[Mon Jul 7 22:52:56 2014] 6 disabled
[Mon Jul 7 22:52:56 2014] 7 disabled
[Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
[Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
[Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
[Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
[Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
[Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
[Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
[Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
[Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] No NUMA configuration found
[Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
[Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[Mon Jul 7 22:52:56 2014] Zone ranges:
[Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
[Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
[Mon Jul 7 22:52:56 2014] Normal empty
[Mon Jul 7 22:52:56 2014] Movable zone start for each node
[Mon Jul 7 22:52:56 2014] Early memory node ranges
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
[Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
[Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
[Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
[Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
[Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
[Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
[Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
[Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
[Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
[Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
[Mon Jul 7 22:52:56 2014] Policy zone: DMA32
[Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Checking aperture...
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
[Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
[Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
[Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
[Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
[Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
[Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] console [tty0] enabled
[Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
[Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[Mon Jul 7 22:52:56 2014] hpet clockevent registered
[Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
[Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
[Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
[Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
[Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
[Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
[Mon Jul 7 22:52:56 2014] Security Framework initialized
[Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
[Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
[Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
[Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
[Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
[Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
[Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
[Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
[Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
[Mon Jul 7 22:52:56 2014] ... version: 2
[Mon Jul 7 22:52:56 2014] ... bit width: 40
[Mon Jul 7 22:52:56 2014] ... generic registers: 2
[Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
[Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
[Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
[Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
[Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
[Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
[Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
[Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
[Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
[Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
[Mon Jul 7 22:52:56 2014] devtmpfs: initialized
[Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
[Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
[Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
[Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
[Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
[Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
[Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
[Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
[Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
[Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
[Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
[Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
[Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Mon Jul 7 22:52:56 2014] vgaarb: loaded
[Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
[Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
[Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
[Mon Jul 7 22:52:56 2014] NetLabel: Initializing
[Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
[Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
[Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
[Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
[Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
[Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
[Mon Jul 7 22:52:56 2014] TCP: reno registered
[Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
[Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
[Mon Jul 7 22:52:56 2014] Unpacking initramfs...
[Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
[Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
[Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
[Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Mon Jul 7 22:52:56 2014] zbud: loaded
[Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
[Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
[Mon Jul 7 22:52:56 2014] Key type big_key registered
[Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[Mon Jul 7 22:52:56 2014] io scheduler noop registered
[Mon Jul 7 22:52:56 2014] io scheduler deadline registered
[Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
[Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
[Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
[Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
[Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
[Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
[Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
[Mon Jul 7 22:52:56 2014] TCP: cubic registered
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
[Mon Jul 7 22:52:56 2014] registered taskstats version 1
[Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
[Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
[Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
[Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
[Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
[Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
[Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
[Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
[Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
[Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
[Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
[Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
[Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
[Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
[Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
[Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
[Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
[Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
[Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
[Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
[Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
[Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
[Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
[Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
[Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
[Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
[Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
[Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
[Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
[Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
[Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
[Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
[Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
[Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
[Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
[Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
[Mon Jul 7 22:52:56 2014] [drm] Connector 0:
[Mon Jul 7 22:52:56 2014] [drm] VGA-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[Mon Jul 7 22:52:56 2014] [drm] Connector 1:
[Mon Jul 7 22:52:56 2014] [drm] LVDS-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
[Mon Jul 7 22:52:56 2014] [drm] Connector 2:
[Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] Connector 3:
[Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
[Mon Jul 7 22:52:56 2014] [drm] HPD1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
[Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
[Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
[Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
[Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
[Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
[Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
[Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
[Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
[Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
[Mon Jul 7 22:52:57 2014] [drm] size 9216000
[Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
[Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
[Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
[Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
[Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
[Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
[Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
[Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
[Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
[Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
[Mon Jul 7 22:53:28 2014] ata2: soft resetting link
[Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:33 2014] ata2: soft resetting link
[Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:33 2014] ata2.00: disabled
[Mon Jul 7 22:53:38 2014] ata2: soft resetting link
[Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:43 2014] ata2: soft resetting link
[Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:44 2014] ata2.00: disabled
[Mon Jul 7 22:53:44 2014] ata2: EH complete
[Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
[Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
[Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
[Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
[Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
[Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
[Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
[Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
[Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
[Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
[Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
[Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
[Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
[Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
[Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] kvm: disabled by bios
[Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
[Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
[Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
[Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
[Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
[Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
[Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
[Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
[Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
[Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
[Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
[Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
[Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
[Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
[Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
[Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
[Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
[Mon Jul 7 23:12:55 2014] CPU1 is up
[Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 23:12I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back. -
Mini DisplayPort to Dual-Link DVI Adapter 1.03 - screen goes black and won't come back
I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues as so commonly described, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. Is anyone else seeing this issue?
Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1" -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Pavillion dv6-Had screen replaced on August 22, 2012 because it went black and would not come back o
Have a Pavillion dv6 for my teenage daughter. We got it late December of 2011, so it's less than a year old. On August 22, 2012, I just got it back from being repaired because the screen went black and would not come back on no matter what we did. It came back with a teeny, tiny little black line way down at the bottom of the screen, didn't seem like a big enough problem to worry about so we kept it and she used it. Last night when she went to bed it was working fine, today when she turned it on after getting home from school, the whole screen is a disaster---it looks like a big diagonal crack is running up the screen and it's a solid strip of color on one side and then lines and then the crack then you can see where the sign on logo is trying to run---kind of---rolling up the tiny part of the screen it is showing on. Called customer support, which was a complete nightmare! I used the first number that came up for hpsupport on google and it was iyogi-----could barely understand the woman on the other end, she kept having me tell her the problem over and over and over and over and telling her my name and phone number and email address and the serial number and the product number, over and over and over and over and over and over-----this went on forever---then she had me try pressing the f10 key and the power button and it gave 13 beeps and would go off, she had me put the phone up so she could hear that happen 6 times. Then finally she says it;s a hardware problem and she will transfer me over to harware support after trying to sell me software protection that I don't want. She transfers me, I get an automated system and damned if I don't get rolled right back to the same Indian woman and she starts me from scratch like she hadn't just talked to me 4 minutes before that-----I was furious! I told her I had already been on the phone with her and told her all this information and she still had me give it to her 3 more times then said she would put me through to hardware support. I spent 1 hour and 25 minutes on the phone total and almost all of it was with this woman that had no clue and barely spoke English. Why? I live in the USA, I bought the product in the USA, why can't I speak to customer support in the USA? Why do I always have to talk to someone that I have a language barrier with? Why do they always make me do the same thing over and over and over and keep me on the phone over an hour? It was the same way in August when it needed repaired, I was on the phone that night 1 hour and 10 minutes. Is the goal to get you to just forget it and go buy a new one?
iYogi is not part of HP. I would recommend calling 1-800-474-6836 or visiting http://goo.gl/Pru5A for all of your support needs with HP products.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
Camera works, with the side buttons it takes pictures.
Although I'm not able to see on the screen.
MikeFirst try a restore from backup
If problem still occurs try a restore to factory defaults/new Pod.
If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order. -
my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on
Hello all,
Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
Thank you very much in advance!
Sincerely,
Saggz.Hey Fleurdemimi,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
my ipod is bricked and jailbroken but when it is stuck on apple sign and wait for like a long time it comes back to password screen but it does not say safe mode or anything cant open cydia or anything. it started when i was in ifile it froze when i clicked on a file then i pressed home and it was frozen so i just turned it on and back on and stuck on the apple logo i was freaking out for like a day i need help please! do i have to delete ifile or sumthing i really do not want to update or restore i can still go to home screen and touch stuff by cant open cydia apps and i was freaked out is there a way to fix it? ps: gets stuck on apple logo for like and hour then goes to lockscreen and i can type my password in and stuff but cant touch any cydia apps if i did it just crashes so i can still do things like go to settings
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
I also have power management problems again with computer not sleeping properly and my Magic Mouse
being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
I also have Wake for network access, power nap and start up after power failure unchecked as well.
Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
These problems occurred after shutting down my Mac and restarting it this morning.
I know using a VGA cable will fix it but I don't want to do that.
Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
of HDMI video blanking out while in the OS.
I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
flawlessly and I really mean flawlessly. It was magical. Not a single problem.
I guess we have to wait for 10.10.2 or 10.10.3.
I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
no use for work or multimedia.
I'm sorry about the rant.
If anyone has figured out a workaround until Apple can issue another point release, please let me know.
I already tried resetting the SMC and NVRAM several times to no avail.
Thanks in advance.
I appreciate any help.
PaulEtreCheck version: 2.1.2 (105)
Report generated 13 December 2014 at 9:03:00 AM GMT+7
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:11
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
USB Information: ℹ️
Apple Inc. iPhone
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DAEMON Tools Lite.app
[not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
/Applications/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.1) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.tencent.xin.WeChatHelper.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uHD-Agent UNKNOWN (missing value)
Google Drive Application (/Applications/Google Drive.app)
MacFortHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
5% WindowServer
0% BBLaunchAgent
0% AppleSpell
0% fontd
0% Google Drive
Top Processes by Memory: ℹ️
241 MB Safari
172 MB mds_stores
155 MB com.apple.WebKit.WebContent
120 MB spindump
103 MB Google Drive
Virtual Memory Information: ℹ️
11.13 GB Free RAM
3.86 GB Active RAM
998 MB Inactive RAM
1.19 GB Wired RAM
2.15 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 08:10:23 AM Self test - passed
Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash -
My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?
I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.
-
I own an iPod Touch 4g 8gb. Ever since Wednesday August 12th 2012, the screen has had a problem -- it is black. Pitch black. I can tell that it still works -- by sliding my finger down to unlock it I can still hear the lock sounds. My online research told me to reset it and put it in DFU Mode -- but that didn't work. So I connect it to iTunes and restore it to iTunes and after the restoration, the screen comes back -- for a few miniutes. I did this twice and the second time was longer than the first. I have not adjusted any settings that could have anything to do with this.
So... What to do here? Can someone explain exactly what the problem and it's recovery-processes are?I'm not a fan of DFU mode because I've never seen it recommended by Apple.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.
Maybe you are looking for
-
Transferring pictures from windows gallery to photoshop cs 5 how's it done
How do you do it?
-
New Macbook, bought in May of this year. Lately the keyboard has not been displaying the p, 0, ? and enter key. The MacBook is still under AppleCare, but I am curious if I can fix this at home instead of driving to NH. I live in Maine. The only issue
-
Could some-one please help, nothing I do will stop the number of e-mails coming through. I never want anything to do with Apple again. I still have the original problem but on to of that my in box is being filled with e-mails from the discussion gr
-
Morgan Stanley - Flex Developers needed - Contract or Perm , London
Position Description Flex and Java developers are required to work on Morgan Stanley Matrix. Matrix is Morgan Stanley's Fixed Income e-Trading Platform Used globally by clients and internal sales/trading staff Opportunities exist in many areas of the
-
Keywords and filters in solman
Hi all in our organization, we have a large b.p.h in the blueprint screen( trensaction SOLAR01). we create keyword but the filter doesn't filter shortcut process step (level 3) so we still remain with large b.p.h please advice i have to find solution