Comes out of the game all of a sudden

While playing any game all of a sudden it comes out of the game to the screen. Need to know why this is happening?

(A) Force close apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
(B) Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo.

Similar Messages

Logic 9 - Memory Overload - Out of the blue / all of a sudden

I have been working with Logic Pro for about 4 years on a circa 2007 iMac (2 Core, 2GB RAM), 10.9.4 - and have produced about 30 projects - ranging in total number of tracks from 12-36; medium use of plug ins and always Bus Space Designer.
I would get the Overload Message intermittently over the years, but could solve that by closing anything else running on the machine, restart Logic and be back in the game. Everything seemed to work very well for years. I have not made any changes to the set up, either Logic or the machine, apart from latest software updates, etc. When I started Logic today, I can't even play a project; I have tried to Play several projects, some with very few tracks, some with heavier tracks; both crash after about 15 seconds of play.
I have run Clean My Mac2, emptied the trash, etc. I realize that my RAM is very low, but I can't work out why this has happened all of a sudden. Any advise?
Thanks.

Hi John,
1) Dont use anything.. OS X can take care of itself...
2) It's Firefox.. As you have found out it can really hog resources....I would suggest you uninstall it and use Safari... unless you have a really good reason not to do so...
2a) What is Escrow Security Alert.app? (Its part of Mavericks/Keychain and its not using any real resources of note so no worries..)
3) Ok.. so it's a System Overload and thats likely being caused by Firefox as others have reported....
4) Growl is a program that puts msgs being reported by other apps, up onto your screen. Not really needed these days thanks to OS X's own notification system...
http://growl.info
http://growl.info/documentation/growl-package-removal.php
5) Absolutely yes... Personally I'd add more if you can....(I think your Mac might actually take 6GB...) Check with OWC to find out for sure... as Apple often state low minimums for memory when the hardware can support more than is officially listed..
https://www.macsales.com
...as the more memory, the better the system operates I've found.... 2GB is the absolute bare minimum when running 10.9 and Logic.. and is going to make your Mac under perform for sure... Make sure you are running Logic Pro 9 in 64bit mode to make use of the extra memory above 4GB...
Crucial is fine for memory.. so long as it is the exact correct type for your Mac Model...
Final tip: Make sure nothing is running in the background when running Logic.. Quit all other apps.... including any apps that launch on startup....as your Mac is unpowered as it is for use with modern OS X versions.. (The modern OS X versions make much higher demands on the hardware.. which is why many of us using older Macs.. use Snow Leopard along with Logic Pro 9 whenever possible) so ensure you provide all the CPU/Memory resources you can when running Logic...
Cheers..
Nigel

Why does my pdf file to excel come out with the columns all misplaced

Please help. When i transfer the file the file is all out of order regarding my columns

Hi arodsworld,
Try disabling the OCR function using the steps outlined here: http://forums.adobe.com/docs/DOC-3062
Please let us know how it goes.
Best,
Sara

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

Ipod Nano 7 - No sound comes out of the headphones, and i tried different headphones... Can you help? What shall i do?

Hello ! No sound comes out of my ipod nano 7. I tried different headphones, all working on other players, but nothing comes out of the ipod nano. Of course I turned the volume up and made sure to press on play... Anybody to help me out? Thanks a lot !

The jack on the Nano is very tight when it is new. Push the headphones all the way in until the plastic on the headset jack is flush with the body of the Nano.

Sound no longer comes out of the speakers but will come out of the headphones on a m6-1035dx

I am using Windows 7 Home Premium 64-bit on an HP Pavilion m6-1035dx. Sound still comes out of the headphones but won't come out of the main speakers. I tried the audio troubleshoot buttom and it couldn't detect the problem. I also tried two headphones and neither work. While i was trying to test sounds on skype application I could hear the sounds on speakers for a very short time. Please Help!!

Hi,
Try the following.
First, temporarily uninstall Skype and when this has completed, restart the notebook.
Next, download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56953.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ). Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
If it now works Ok, reinstall Skype
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

TS2634 I bought a ipad back in December and the ear buds never worked. The sound doesnt come out of what you put in your ear but comes out of the little hole on the outside of the ear buds. Is this supposed to be this way?

The earbuds that came with my ipad have never worked. They have sound that comes out of the outside hole of the earbuds. When you put them in your ears no sound can be heard. Has this been a problem or did mine just come broken?

I have the same problem and it has just started in the last day or so...
Got the phone late July and then in the last day, everytime I plug into PC or take a photo, I get the same "Disk Error / Retry message"
What is interesting is that I always had the Photo Storage location as the Memory Card (detachable). Seems odd that sometime in the last month or so the phone decided to change my setting to the Mass Memory. Might have been an firmware update that I have done in the past but not sure.
Changing the Photo Storage Location back to the Memory Card has stopped the error coming up everytime a Photo wastaken, but the message continues when I plug in the phone to the PC.
Phone was just updated to latest firmware this morning and that has not helped, although during the back-up process I could not save some files from the Mass Memory.
I wonder if Optus will shout a new phone because their technicians are useless with past experiences and to be honest the N97 really promises so much but offers very little compared to all of my last Nokia's.

****How to come out of the infinite loop by passing a perticular message

Hi all,
Can You Pl expalin me in detail "How to come out of the infinite loop by passing a perticular message in BPM Scenarios"
Thanks,
Srinivasa

Hi Potharaju,
For this al you need to do is define an IP with two branches. One of the branch receives message of a particular type only. And the other branch is used for stopping the message processing. This is achieved using the correlation. Correlation makes sure that the message of the first type goes to the first branch only and that the message of second type should go to the second branch only. Now when the message of the second type is received, the control comes out of the infinite loop.
Hope it makesit clear.
Regards,
Sanjeev.

I transfer all my games from my iphone to my pad, but the game progress is lost.... i signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

I transfered all my games from my iphone4s to my ipad, but the game progress is lost.... I signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

Hi bubbles213,
The best way to move information from one iOS device to another is to back up the device using iCloud or iTunes (or both), and then restoring the new device from it. This article will walk you through the steps:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Cheers,
- Judy

I just got a new iphone 5. When I plug in the ear buds, the sound still comes out of the phone itself. What do I do to get the audio to go to the ear buds?

Just got a new iphone 5. When I plug in the ear buds, the audio still comes out of the phone itself. How do I transfer the audio to the ear buds?

Make sure it's plugged in all the way, because it clicks when it's no all the way In and many users get confused. If not try turning it.

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
The problem occurred a few days after I had updated to iOS 7.02

Hey Tahls23!
I have an article that can help you troubleshoot that issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

When is the new docking station going to come out for the new iPod touch with the lightning connection?

I have just got the new iPod Touch for christmas. I am now wondering when a docking station will come out for the new iPod Touch with the new lightning connection. I have not been able to find a docking station that fits the iPod Touch without having to buy the adapter(the adapter does not allow the iPod to be charged)
When will a docking station come out for the new iPod Touch?
Olivia Davey

You would have to ask the makers of the docking stations that question. Belkin has a dock now that uses Apple's Lightning cable:
http://www.belkin.com/us/F8J057-Belkin/p/P-F8J057
so all it basically does is provide a stand and pass through the headphone jack. There's at least one other dock here:
http://www.thelightningdock.com/products/iphone-5-dock
If you're referring to Apple's Universal Dock, there have been no indications that they will make any new dock, though of course none of us here know their plans for future products.
Regards.

Sound no longer comes out of the headphones but will come out of the speakers on a m6-1035dx.

I am using Windows 7 64-bit on an HP Pavilion m6-1035dx. Sound still comes out of the main speakers but won't come out of the headphones. I tried the audio troubleshoot buttom and it couldn't detect the problem. I also tried two headphones and neither work. I didn't make any changes to my computer or really touch my computer from when it went from working to not working.
This question was solved.
View Solution.

Take a look throught this HP document and see if it help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&lc=en&cc=us&dlc=en
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Why is my bluetooth speaker connected but sound only comes out of the computer speakers?

My bluetooth speaker (JBL Charge 2) is shown as "connected in the blu tooth section of the task bar. I have also gone to system preferences and the speakers are also shown to be connected and chosen as the main speakers. However, no sound comes out of the bluetooth speaker but rather the sounds still comes out of the computer. speakers. I have tried connecting, reconnecting, and restarting computer. The bluetooth speaker is also shown as connected in bluetooth preferences. What is wrong?

I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

HT201471 Does anyone know if video comes out of the headphone jack like the Itouch does on a Ipad3?

I was wondering if the video out put comes out of the headphone jack on a Ipad3 like it does on a Itouch?

No. Video will need to be shared via Home Sharing, Airplay or using an AV adapter.

Comes out of the game all of a sudden

Similar Messages

Maybe you are looking for