Comiling the standard form gives errors

Hi,
When I open the standard form APXPMTCH.fmb in forms builder and compile, I receive the below error.
"identifier AP_AMT_MATCH_PKH.AP_AMT_MATCH must be declared"
when I looked for this procedure it exists in the instance. I am not sure what is causing this error? Are the number of parameters or parameters types changes if we open the form in form builders in this procedure call?
Thanks,
HC

Please post the details of the application release, database version, OS, forms version.
Have you completed the steps in this thread? -- URGENT: Forms 6i error
Can you reproduce the issue when you open other form (for example, TEMPLATE.fmb)?
Thanks,
Hussein

Similar Messages

  • In the smartform how to change the company adress in the standard form

    Dear experts,
    In the smartform how to change the company adress in the standard form.
    Regards,
    Balakrishna R.V

    Hi,
    Go through this link below:
    change in SAP Standard Address
    Hope it helps
    Regards
    Mansi

  • Standard prgram and the standard form for the AR Bill of Exchange

    I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
    Can you let me knoe the standard prgram and the standard form for the same.
    Regards,
    Senthil

    Hello,
    You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
    http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
    Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
    hope this helps
    regards,
    radhika

  • Customize the standard form is WebDynpro ESS (ess~lea)

    Hi,
    I want to customize the standard form is WebDynpro ESS (ess~lea) Leave Request for Infotype2001 subtype 9990 in NW04. What are the steps and best practices?
    Regards
    Ali

    Hi
    Please see SPRO->Personnel Management->Employee Self-Service->Service-Specific Settings->Working Time->Layout of Web Application->Define Field Selection.
    Regards
    kk.

  • If I resize the Standard form the userdefined field get disturd

    Hi Experts,
    If i re size the standard form the user defined fields get disturb. Is there any solution for this issue?
    -Regards
    Vikas

    Hi Vikas,
    You can capture the resize event and reposition/redimension your items according to a reference item (usually the recommended approach).
    Please note that B1 attempts to reposition the items automatically so some items might not need you to adjust them.
    Good luck.
    Best regards,
    Pedro Magueija

  • After trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION"  Please help me out

    I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
    after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION"  Please help me out

    In most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.

  • TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
    tt2

  • Exchange 2013 management tools installation on windows 2012 standard edition gives error.

    Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
    Does anyone observed this issue ?
    Error:
    The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
    My Test lab is having
    Exchange 2013 installed (xyz.local) domain and working fine.
    Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain  (base OS : Windows 2012 standard edition : Windows updated)
    Best Regards
    sameer Prabhune

    Hi Sprabhune,
    It should work.
    Did you install the tool by GUI or cmd?
    Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
    If possible, please try to install the tool on Windows 7/8 client to test.
    Exchange 2013 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354.aspx
    Frank Wang
    TechNet Community Support

  • While Changing the status system gives error

    Dear Experts,
    In Solution Manger,  While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
    Document 8000002519 refused for technical reasons: ERROR_FREE
    Message no. SOCM_ACTION_LOG203
    Diagnosis
    The status value cannot be changed.
    The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
    System Response
    This change transaction is skipped during report processing.
    Procedure
    Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
    Also if i select the status as in process, then it executes sucessfully.  Please help me in this.
    Ramesh Jaiswal
    9867936636

    Hi Ramesh,
    Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
    I just checked.
    So it seems this is availabe only after SP18.... we can use the above report.
    Kindly confirm once you solve your problem.
    Dirk
    Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
    Regards
    Prakhar

  • SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

    Hi Experts,
    I have requirement to change the standard template format.
    I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
    After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
    Can anyone have idea how to solve this issue ?
    Can we change the template within cloud system?
    If Yes than How ?
    Regards,
    Mithun

    The following are the instructions (November 2014 version of SAP Cloud for Customer)
    Edit a Form Master Template
    Overview
    As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
    Procedure
    1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
    2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
    3. Select the master template you want to edit and click Edit.
    4. On the Form Master Template tab, do the following:
    Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
    5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
    6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
    This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
    7. Click Save and Close.
    Result
    If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
    Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

  • Count and Names of the Standard Forms used in financial Module

    Hi gurus,
    Kindly help us to list the form names and count for each financial module (*Excluding Setup Forms*)
    Also please suggest how to count the number of OAF pages for each financial Module.
    Any Query to find this?
    This is needed for estimatation purpose.
    Thanks,
    Vidhu

    1) i want to know what kind of forms do you use from SD point of view.?
       SD point of view :
       1. Quotation layout
       2. order confirmation
       3.delivery
       4. Packing list
       5. Invoice
       6 Invoice List
       7 Bill of lading(Shippment)
    2) are they Modified forms or standard forms?
       Always we used modify when it requires,99% we don't use SAP Standard form since layout design not good,we design properly
    3) can you provide the list of forms that sd people use and how are they modified
        You can get everthing in NACE Transaction.
    GOTO NACE Transaction -> select V1 Application -> click on output type -> select output type BA00(Order confirmation) -> click on processing routine.
    here you will be able to see form name and programs.
    same thing you can select V2,V3 .
    Thanks
    Seshu

  • Can't download the .pdf form. Error comes up of "Acrobat could not save this ,pdf file. The file might be open in another app and cannot be overwritten."

    It was happening on the mac. Now it is happening on both a mac and pc.

    I read some other threads after posting this. Seems if you download the Adobe Forms Central App to your computer, you combat the problem. It is running much smoother now and allows me to save .pdfs to my mac no problem. I thought it was a problem with Acrobat but it turns out is is an issue with using the online program versus the App. I highly recommend the app.
    Thanks for responding though.

  • Info path form gives error on submitting "The StateManager is disposing and calling ReleaseLockedStates() (Count=0)"

    Hi,
       I have created a very simple form which has 2 data connections all together. One connection is for a drop down which gets populated from a list within that site itself and the other data connection is used when I am submitting that form. But
    it is giving this error when I am submitting the form
    Error:
    The StateManager is disposing and calling ReleaseLockedStates() (Count=0)
    So, I have created a data connection library and uploaded the 2 udcx file in it and approved them but still the error is there.
    Please assist me on this. It is very urgent.

    Resolved the issue by changing the button type to "Submit"

  • Xmonad.hs file: I need a template, but the official one gives errors

    I just installed Xmonad and I am LOVING it, but I need some help setting up an xmonad.hs file. I created one in ~/.xmonad/xmonad.hs and looked for a well-commented template since I don't know any Haskell (or any programming language, for that matter). This is the one I copied to the file:
    http://www.haskell.org/haskellwiki/Xmon … _xmonad.hs
    Which gives:
    -- xmonad example config file.
    -- A template showing all available configuration hooks,
    -- and how to override the defaults in your own xmonad.hs conf file.
    -- Normally, you'd only override those defaults you care about.
    import XMonad
    import System.Exit
    import qualified XMonad.StackSet as W
    import qualified Data.Map as M
    -- The preferred terminal program, which is used in a binding below and by
    -- certain contrib modules.
    myTerminal = "xterm"
    -- Width of the window border in pixels.
    myBorderWidth = 1
    -- modMask lets you specify which modkey you want to use. The default
    -- is mod1Mask ("left alt"). You may also consider using mod3Mask
    -- ("right alt"), which does not conflict with emacs keybindings. The
    -- "windows key" is usually mod4Mask.
    myModMask = mod1Mask
    -- The mask for the numlock key. Numlock status is "masked" from the
    -- current modifier status, so the keybindings will work with numlock on or
    -- off. You may need to change this on some systems.
    -- You can find the numlock modifier by running "xmodmap" and looking for a
    -- modifier with Num_Lock bound to it:
    -- > $ xmodmap | grep Num
    -- > mod2 Num_Lock (0x4d)
    -- Set numlockMask = 0 if you don't have a numlock key, or want to treat
    -- numlock status separately.
    myNumlockMask = mod2Mask
    -- The default number of workspaces (virtual screens) and their names.
    -- By default we use numeric strings, but any string may be used as a
    -- workspace name. The number of workspaces is determined by the length
    -- of this list.
    -- A tagging example:
    -- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
    myWorkspaces = ["1","2","3","4","5","6","7","8","9"]
    -- Border colors for unfocused and focused windows, respectively.
    myNormalBorderColor = "#dddddd"
    myFocusedBorderColor = "#ff0000"
    -- Default offset of drawable screen boundaries from each physical
    -- screen. Anything non-zero here will leave a gap of that many pixels
    -- on the given edge, on the that screen. A useful gap at top of screen
    -- for a menu bar (e.g. 15)
    -- An example, to set a top gap on monitor 1, and a gap on the bottom of
    -- monitor 2, you'd use a list of geometries like so:
    -- > defaultGaps = [(18,0,0,0),(0,18,0,0)] -- 2 gaps on 2 monitors
    -- Fields are: top, bottom, left, right.
    myDefaultGaps = [(0,0,0,0)]
    -- Key bindings. Add, modify or remove key bindings here.
    myKeys conf@(XConfig {XMonad.modMask = modMask}) = M.fromList $
    -- launch a terminal
    [ ((modMask .|. shiftMask, xK_Return), spawn $ XMonad.terminal conf)
    -- launch dmenu
    , ((modMask, xK_p ), spawn "exe=`dmenu_path | dmenu` && eval \"exec $exe\"")
    -- launch gmrun
    , ((modMask .|. shiftMask, xK_p ), spawn "gmrun")
    -- close focused window
    , ((modMask .|. shiftMask, xK_c ), kill)
    -- Rotate through the available layout algorithms
    , ((modMask, xK_space ), sendMessage NextLayout)
    -- Reset the layouts on the current workspace to default
    , ((modMask .|. shiftMask, xK_space ), setLayout $ XMonad.layoutHook conf)
    -- Resize viewed windows to the correct size
    , ((modMask, xK_n ), refresh)
    -- Move focus to the next window
    , ((modMask, xK_Tab ), windows W.focusDown)
    -- Move focus to the next window
    , ((modMask, xK_j ), windows W.focusDown)
    -- Move focus to the previous window
    , ((modMask, xK_k ), windows W.focusUp )
    -- Move focus to the master window
    , ((modMask, xK_m ), windows W.focusMaster )
    -- Swap the focused window and the master window
    , ((modMask, xK_Return), windows W.swapMaster)
    -- Swap the focused window with the next window
    , ((modMask .|. shiftMask, xK_j ), windows W.swapDown )
    -- Swap the focused window with the previous window
    , ((modMask .|. shiftMask, xK_k ), windows W.swapUp )
    -- Shrink the master area
    , ((modMask, xK_h ), sendMessage Shrink)
    -- Expand the master area
    , ((modMask, xK_l ), sendMessage Expand)
    -- Push window back into tiling
    , ((modMask, xK_t ), withFocused $ windows . W.sink)
    -- Increment the number of windows in the master area
    , ((modMask , xK_comma ), sendMessage (IncMasterN 1))
    -- Deincrement the number of windows in the master area
    , ((modMask , xK_period), sendMessage (IncMasterN (-1)))
    -- toggle the status bar gap
    , ((modMask , xK_b ),
    modifyGap (\i n -> let x = (XMonad.defaultGaps conf ++ repeat (0,0,0,0)) !! i
    in if n == x then (0,0,0,0) else x))
    -- Quit xmonad
    , ((modMask .|. shiftMask, xK_q ), io (exitWith ExitSuccess))
    -- Restart xmonad
    , ((modMask , xK_q ),
    broadcastMessage ReleaseResources >> restart "xmonad" True)
    ++
    -- mod-[1..9], Switch to workspace N
    -- mod-shift-[1..9], Move client to workspace N
    [((m .|. modMask, k), windows $ f i)
    | (i, k) <- zip (XMonad.workspaces conf) [xK_1 .. xK_9]
    , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
    ++
    -- mod-{w,e,r}, Switch to physical/Xinerama screens 1, 2, or 3
    -- mod-shift-{w,e,r}, Move client to screen 1, 2, or 3
    [((m .|. modMask, key), screenWorkspace sc >>= flip whenJust (windows . f))
    | (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
    , (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]
    -- Mouse bindings: default actions bound to mouse events
    myMouseBindings (XConfig {XMonad.modMask = modMask}) = M.fromList $
    -- mod-button1, Set the window to floating mode and move by dragging
    [ ((modMask, button1), (\w -> focus w >> mouseMoveWindow w))
    -- mod-button2, Raise the window to the top of the stack
    , ((modMask, button2), (\w -> focus w >> windows W.swapMaster))
    -- mod-button3, Set the window to floating mode and resize by dragging
    , ((modMask, button3), (\w -> focus w >> mouseResizeWindow w))
    -- you may also bind events to the mouse scroll wheel (button4 and button5)
    -- Layouts:
    -- You can specify and transform your layouts by modifying these values.
    -- If you change layout bindings be sure to use 'mod-shift-space' after
    -- restarting (with 'mod-q') to reset your layout state to the new
    -- defaults, as xmonad preserves your old layout settings by default.
    -- The available layouts. Note that each layout is separated by |||,
    -- which denotes layout choice.
    myLayout = tiled ||| Mirror tiled ||| Full
    where
    -- default tiling algorithm partitions the screen into two panes
    tiled = Tall nmaster delta ratio
    -- The default number of windows in the master pane
    nmaster = 1
    -- Default proportion of screen occupied by master pane
    ratio = 1/2
    -- Percent of screen to increment by when resizing panes
    delta = 3/100
    -- Window rules:
    -- Execute arbitrary actions and WindowSet manipulations when managing
    -- a new window. You can use this to, for example, always float a
    -- particular program, or have a client always appear on a particular
    -- workspace.
    -- To find the property name associated with a program, use
    -- > xprop | grep WM_CLASS
    -- and click on the client you're interested in.
    -- To match on the WM_NAME, you can use 'title' in the same way that
    -- 'className' and 'resource' are used below.
    myManageHook = composeAll
    [ className =? "MPlayer" --> doFloat
    , className =? "Gimp" --> doFloat
    , resource =? "desktop_window" --> doIgnore
    , resource =? "kdesktop" --> doIgnore ]
    -- Whether focus follows the mouse pointer.
    myFocusFollowsMouse :: Bool
    myFocusFollowsMouse = True
    -- Status bars and logging
    -- Perform an arbitrary action on each internal state change or X event.
    -- See the 'DynamicLog' extension for examples.
    -- To emulate dwm's status bar
    -- > logHook = dynamicLogDzen
    myLogHook = return ()
    -- Now run xmonad with all the defaults we set up.
    -- Run xmonad with the settings you specify. No need to modify this.
    main = xmonad defaults
    -- A structure containing your configuration settings, overriding
    -- fields in the default config. Any you don't override, will
    -- use the defaults defined in xmonad/XMonad/Config.hs
    -- No need to modify this.
    defaults = defaultConfig {
    -- simple stuff
    terminal = myTerminal,
    focusFollowsMouse = myFocusFollowsMouse,
    borderWidth = myBorderWidth,
    modMask = myModMask,
    numlockMask = myNumlockMask,
    workspaces = myWorkspaces,
    normalBorderColor = myNormalBorderColor,
    focusedBorderColor = myFocusedBorderColor,
    defaultGaps = myDefaultGaps,
    -- key bindings
    keys = myKeys,
    mouseBindings = myMouseBindings,
    -- hooks, layouts
    layoutHook = myLayout,
    manageHook = myManageHook,
    logHook = myLogHook
    So I copied all this into my new xmonad.hs file and then restarted xmonad with mod+q, but a window popped up giving me this error:
    Error detected while loading xmonad configuration file: /home/agi/.xmonad/xmonad.hs
    on the commandline:
    Warning: -no-recomp is deprecated: Use -fforce-recomp instead
    xmonad.hs:141:10: Not in scope: `modifyGap'
    xmonad.hs:141:38: Not in scope: `XMonad.defaultGaps'
    xmonad.hs:273:8: Not in scope: `defaultGaps'
    Please check the file for errors.
    I'm not exactly sure what any of this means. If someone could help me decipher this or, better yet, post a better (well-commented so I can understand it) default xmonad.hs file that I can use, that would be great.

    Alright! I've got xmonad almost set up! One major thing I still want to do is add some sort of pager-like display in the top left of xmobar. Just to show workspaces 1-9 and highlight the one I'm in (giving a preview of my windows or telling me which ones I have windows in would be great, but not absolutely necessary).
    I can't find anything (that I understand) online. Help?
    Here's my xmonad.hs:
    import XMonad
    import XMonad.Hooks.DynamicLog
    import XMonad.Hooks.ManageDocks
    import XMonad.Util.Run(spawnPipe)
    import XMonad.Util.EZConfig(additionalKeys)
    import System.IO
    myManageHook = composeAll
    [ className =? "Gimp" --> doFloat
    main = do
    xmproc <- spawnPipe "/path/to/xmobarbinary /home/jgoerzen/.xmobarrc"
    -- make sure to edit paths to xmobar and .xmobarrc to match your system.
    -- If xmobar is in your $PATH, with config ~/.xmobarrc you don't need the
    -- xmobar path or config file, use: xmproc <- spawnPipe "xmobar"
    xmonad $ defaultConfig
    { manageHook = manageDocks <+> manageHook defaultConfig
    , layoutHook = avoidStruts $ layoutHook defaultConfig
    , logHook = dynamicLogWithPP $ xmobarPP
    { ppOutput = hPutStrLn xmproc
    , ppTitle = xmobarColor "green" "" . shorten 50
    , modMask = mod1Mask
    } `additionalKeys`
    [ ((mod1Mask .|. shiftMask, xK_z), spawn "xscreensaver-command -lock")
    , ((controlMask, xK_Print), spawn "scrot -s")
    , ((0, xK_Print), spawn "scrot")
    and here's my xmobarrc:
    Config { font = "-Misc-Fixed-Bold-R-Normal--13-120-75-75-C-70-ISO8859-1"
    , bgColor = "black"
    , fgColor = "grey"
    , position = TopW L 90
    , commands = [ Run Cpu ["-L","3","-H","50","--normal","green","--high","red"] 10
    , Run Memory ["-t","Mem: <usedratio>%"] 10
    , Run Swap [] 10
    , Run Date "%a %b %_d %l:%M" "date" 10
    , Run StdinReader
    , sepChar = "%"
    , alignSep = "}{"
    , template = "%StdinReader% }{ %cpu% | %memory% * %swap% <fc=#ee9a00>%date%</fc> |"

  • Approving the access request gives error in Sharepoint Foundation 2013 / Email notification codepage problem

    Hello
    On our SharePoint Foundation 2013 server approving Access Requests fails with "request approval failed" after pressing the approve button. The user is site administrator, site collection administrator and site owner.
    In the ulsviewer we see the following error:
    System.NotSupportedException: No data is available for encoding 1033.     at System.Text.Encoding.GetEncodingRare(Int32 codepage)     at System.Text.Encoding.GetEncoding(Int32 codepage)     at Microsoft.SharePoint.Email.SPMailMessageHelper.GetSocialNotificationMailMessage(SPWeb
    web, String senderAddress, String senderName, Boolean useSenderAddressAsFromAddress, String recipientAddress, CultureInfo recipientCulture, String subject, String sidebarHtml, String descriptionHtml, String customMessageHtml, List`1 embeddedAttachments)    
    at Microsoft.SharePoint.SPSharingEmailHelper.SendAccessRequestsEmail(SPCachedItemEventProperties eventProperties, SPUser sender, String message, SPUser recipient, String recipientEmailAddress, String strSubject, String body)     at Microsoft.SharePoint.SPSharingEmailHelper.SendRequestorNotification(SPCachedItemEventProperties
    eventProperties, String objRequestedTitle, SPUser reqByUser, SPUser reqForUser, String message, Boolean isMessageUpdate, Int32 status)     at Microsoft.SharePoint.SPAccessRequestsOperationHandler.HandleStatusChangingToApprove(SPCachedItemEventProperties
    properties, Int32 reqByUserId, Int32 reqForUserId, Int32 newStatus, SPUserCollection users, SPGroupCollection groups, IEnumerable`1 roleDefs)     at Microsoft.SharePoint.SPAccessRequestsOperationHandler.HandleRequestStatusChanging(SPCachedItemEventProperties
    properties, SPUserCollection users, SPGroupCollection groups, IEnumerable`1 roleDefs)     at Microsoft.SharePoint.SPAccessRequestsOperationHandler.ItemUpdating(SPCachedItemEventProperties properties, SPUserCollection users, SPGroupCollection
    groups, IEnumerable`1 roleDefs)     at Microsoft.SharePoint.SPAccessRequests.UpdateItem(Int32 newStatus, SPUser reqFor, String convStr, String permType, Int32 permissionLevel, Boolean extendInvitation, String anonLinkType, SPList accReqList,
    SPListItem item, SPUserCollection users, SPGroupCollection groups, IEnumerable`1 roleDefs)     at Microsoft.SharePoint.SPAccessRequests.ChangeRequestStatusCore(Int32 newStatus, SPUser reqFor, String convStr, String permType, Int32 newPermissionLevel,
    Boolean extendInvitation, String anonLinkType, SPList accReqList, SPListItem request)     at Microsoft.SharePoint.SPAccessRequests.ChangeRequestStatus(Int32 itemId, Int32 newStatus, SPUser reqForUser, String convStr, String permType, Int32
    permissionLevel, Boolean extendInvitation, String anonLinkType, SPWeb web)     at Microsoft.SharePoint.SPAccessRequests.ChangeRequestStatus(Int32 itemId, Int32 newStatus, String convStr, String permType, Int32 permissionLevel)    
    at Microsoft.SharePoint.ServerStub.SPAccessRequestsServerStub.ChangeRequestStatus_MethodProxy(XmlNodeList xmlargs, ProxyContext proxyContext)     at Microsoft.SharePoint.ServerStub.SPAccessRequestsServerStub.InvokeStaticMethod(String methodName,
    XmlNodeList xmlargs, ProxyContext proxyContext, Boolean& isVoid)     at Microsoft.SharePoint.Client.ServerStub.InvokeStaticMethodWithMonitoredScope(String methodName, XmlNodeList args, ProxyContext proxyContext, Boolean& isVoid)    
    at Microsoft.SharePoint.Client.ClientMethodsProcessor.InvokeStaticMethod(String typeId, String methodName, XmlNodeList xmlargs, Boolean& isVoid)     at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessStaticMethod(XmlElement
    xe)     at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessOne(XmlElement xe)     at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessStatements(XmlNode xe)     at Microsoft.SharePoint.Client.ClientMethodsProcessor.Process() 449c7b9c-6cec-f09a-9792-3d76c4d7e351
    The server is running on an English Windows 2012 Server and also the English version of SharePoint Foundation 2013 with the June 2013 CU.
    We see exactly the same error when add users to a group with the option "Send an email invitation" enabled.
    Any ideas what could cause this problems?
    Regards,
    Reinhard

    Hi Reinhard ,
    According to your error message, it says that no data is available after  encoding the social notification mail message. It  should be caused by the E-Mail encoding setting.
    For troubleshooting your issue, please check the character set of your E-Mail Settings:
    Verify that the user account that is performing this procedure is a member of the Farm Administrators group.
    On the Central Administration Home page, click System Settings.
    On the System Settings page, in the E-Mail and Text Messages(SMS) section, click Configure outgoing e-mail settings.
    On the Outgoing E-Mail Settings page, make sure
    Character set setting is  65001(Unicode UTF-8).
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for