Comm channel missing in comm channel monitoring

Hi,
I have created sender and receiver communication channels of adapter type XI. I am using PI 7.0 version. But I don't see these communication channels in RWB comm channel monitoring.
I was going through the help.sap.com and in
http://help.sap.com/saphelp_nw04s/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm
In this it is mentioned clearly as "The XI adapter as part of the Adapter Engine gets the required....."
if this is part of the adapter engine then it should show the communication channels registered for it.
Moreover if SAP doesn't want to display these XI adapter com channels then why they have XI adapter type in the drop down box to filter the data.
Please provide your guidance in this regard.
thanku
bk

Hi Bhargvi,
XI adapter is in-built in the integration engine............in RWB in comm channel monitoring, you can view all the comm channels which are at adapter engine...................so this is why you cannot see your XI, IDOC or HTTP adpater in comm channel monitoring because these adapters reside in integration engine directly..................but to tell integration engine regarding the target system you have to configue thier comm channels in ID.
Regards,
Rajeev Gupta

Similar Messages

Adapter types & comm. channels missing in comm channel monitoring

Hello All,
We recently created a new sandbox XI system from a copy of our XI Test system
system. We used the SAPinst system copy process for ABAP+JAVA to create
this new XI sandbox system. We have followed all of the XI/PI post copy procedures listed in the system copy documentation and almost everything is working except when we going into the runtime workbench for XTX and go into communication channel monitoring for the adapter engine. When we get
here we do not see any adapter types where we should be seeing types such
as JDBC, BD, CIDX, FILE, JMS, etc We also do not see any communication channels in the communication channel monitoring if we select use filter to display all.
Any ideas?
Any help on this would be much appreciated
With regards
Steven

Hi,
First check in Integration Directory. Just create any dummy Communication Channel, if you are able to select your adapter for your communicatio channel then this is a cache issue. Just refresh the CPACache by this url.
http://<server name>:<HTTP Port>/CPACache/refresh?mode=full
Else you are not able to select any adapter for your communication channel then you have forgot to import the SAP BASIS Software Component Version into Integration Repository.
You can find it from your installation DVD's, and if you are not able to find then you can download it from service market place as given below..
[Click on this URL|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20]
In Search Term Enter SAP BASIS 7 or 3.
Now click on XI CONTENT SAP_BASIS 7.00 (if u r using PI else select SAP_BASIS 3.0) -
>
Database independent -
> SAPBASISxxxxx-0888.ZIP (this file should be based on your SP level)
Just save this file on your machine and unzip it.
Now put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
Now login to Integration Repository and from menu TOOLS ---> Import design objects and import it.
Regards,
Sarvesh

XI communication channel missing in communication channel monitoring

Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?

Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.
Regards,
Bhavesh

Missing facility: graphic channel mixer

Hi Guys,
I miss a graphic channel mixer so that I can reduce channel separation in
problem zones, primarily the bass range when handling vinyl and shellack,
but there may also be benefits for similar processing in the treble range.
Kind regards
Peter Larsen

In the arrange window, check to make sure the check-boxes have been checked to display sends,pan etc etc etc.
I'm not infront of logic right now so I cant be more specific.
AD2

Premiere Pro CS4, Missing #1 Audio Channel

Running CS4, on Vista Ultimate 64. P2 files
The 1st channel of audio is missing. I checked the footage on a separate machine, and it's all good, but on my PC, the wave form on the 1st channel of audio is blank. When I 1st put the audio into the timeline, I could see the wave form, but as soon as I hit play, it went blank. I tried to "adjust audio gain" and it crashed the program. I tried to make a new project, and re-import the audio in stereo, but it only gives me audio on the R side of the 1st channel. The 2nd channel is fine.
Weird stuff. Any hints?
Thanks!
Eric B.

The Panasonic P2 format
A P2 card is a solid-state memory device that plugs into the PCMCIA slot of a Panasonic P2 video camera, such as the AG-HVX200. The digital video and audio data from the video camera is recorded onto the card in a structured, codec-independent format known as MXF (Media eXchange Format). Specifically, Premiere Pro supports the Panasonic Op-Atom variant of MXF, with video in DV, DVCPRO, DVCPRO 50, DVCPRO HD, or AVC-I formats. A clip is in the P2 format if its audio and video are contained in Panasonic Op-Atom MXF files. These files are located in a specific file structure.
The root of the P2 file structure is a CONTENTS folder. Each essence item (an item of video or audio) is contained in a separate MXF wrapper file. The video MXF files are in the VIDEO subfolder, and the audio MXF files are in the AUDIO subfolder. XML files in the CLIP subfolder contain the associations between essence files and the metadata associated with them.
Note: Premiere Pro does not support proxies recorded by some Panasonic P2 camcorders in P2 card PROXY folders.
For your computer to read P2 cards, it needs the appropriate driver, which you can download from the Panasonic website. Panasonic also provides the P2 Viewer application, with which you can browse and play media stored on a P2 card.
Note: To use certain features with P2 files, you first change the file properties from read only to read and write. For example, to change the timecode metadata of a clip using the Timecode dialog box, you first set the file properties to read and write. Use the operating system file explorer to change file properties.

Missing Local HD Channels

I've had a problem with missing local HD channels, including NBC during the Olympics. Despite multiple phone tech calls and a tech visit, my problem has not been fixed. I've been hearing that some other Verizon customers in the Beaverton area have had this same problem, and completely changing out coax cables did not fix it. My incoming signal is good, but signal to noise is below what is should be (19). I have a suspicion that it may somehow be linked to my DVR/set-top box, as the latest case of missing channel 508 occurred just as I started recording. Only two channels seem to be affected, 506 and 508, both local HD channels.

You are a long way away from the Crystal Palace transmitter and COM7 is transmitting at only 15,600 Watts compared to the 200,000 Watts that the other existing muxes use. So weaker signal may not be being picked up by the dual tuner Youview bpx
http://www.ukfree.tv/txdetail.php?a=TQ339712
What signal strength do you get on your other TV ?

Channels missing

Hi
I installed BT Vision a couple of days ago. Everything is working fine - including getting access to the two sports channels using a viewing card - but I can only receive a few of the other channels. I can't get any of the BBC channels, ITV 1, ITV 2 or C4 etc. - when I type in the relevant channel numbers, a message on the box appears saying 'unavailable'. The only ones I can get are ITV3, ITV4, Film 4 and a handful of shopping channels!
I know my aerial is fine, as it is less than 3 years old and I can get all the channels on my TV's tuner and the tuner on my HDD recorder without any problems. I've tried re-booting and re-scanning a number of times without any change.
Is this a common problem? I'd be grateful for any suggestions! Thanks in advance.

i hope you have more luck than i am having i use to get all the hd channells and the extra channels but mid july they stopped i am now waitng for someone from "level 3" to get in touch but not holding my breath 1 thing you could try next time you phone is ask for the level 2 direct line no AND THE CURRENT PIN NO it will save you ages waiting for someone to talk to,,,, best of luck

Toshiba 32W1333DN: buttons moving/deleting/edit name for channels missing

Hello,
I just bought 32W1333DN in Sweden.
But I cannot change the position of channels in the channel list.
Both the Quick start guide that comes in the box with the TV and the online manual has images and details about how to move channels/delete channels and edit channel names in the channel list.
I am supposed to go into
Menu->Channel List->Edit Channel List.
Once there I select channels and perform tasks by selecting buttons.
But those buttons are not there where I look at my TV.
Instead of buttons for *OK* / *Move* / *Delete* / *Edit name* / *Lock* I only have *OK* / *Lock*.
What is going on?
In settings, Program version is *V.2.1.4A*, and Software upgrade *V.2.1.9x*.

Hi
Please take a look into the user manual
[Toshiba 32W1333 user manual|http://www.toshiba-om.net/LCD/PDF/English/W1333-32-English.pdf]
Page 17 provides info about Channel List, Sorting Programmes and Programme Locking.
For example to move the single channel in the list you should do the following:
The channel order may be changed to suit your personal preference.
Select Channel List from the main menu and press OK button.
Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List.
Select Move option in the channel list and press OK button.
Edit Number screen will be displayed. Enter the desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK.
Selected channel is now moved.

Error: The channel class 'mx.messaging.channels.AMFChannel' specified was not found

Hi guys. I'm stuck with the class not found error trying to use remote objects with BlazeDS. I'm building the application using flex sdk 3, Ant flexTasks.jar (without FlexBuilder) and Tomcat 5.5.17. The result after clicking on the Remote service button is a window with the following error message: [MessagingError message='The channel class 'mx.messaging.channels.AMFChannel' specified was not found.'] In my code, I have in main.mxml: <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"layout="vertical"> <mx:Script>..CDATA[import mx.controls.Alert;..</mx:Script> <mx:RemoteObject id="remObj" destination="product" result="Alert.show(event.result.toString());" fault="Alert.show(event.fault.faultString);"/> <mx:Button id="remoteService" label="Remote Service" click="remObj.getResults('MyName');"/> </mx:Application> In remoting-config.xml: <?xml version="1.0" encoding="UTF-8"?> <service id="remoting-service" class="flex.messaging.services.RemotingService"> <adapters> <adapter-definition id="java-object" class="flex.messaging.services.remoting.adapters.JavaAdapter" default="true"/> </adapters> <default-channels> <channel ref="my-amf"/> </default-channels> <destination id="product" channels="my-amf"> <properties> <source>flex.example.ProductService</source> <scope>application</scope> </properties> <adapter ref="java-object"/> </destination> </service> In java: package flex.examples.ProductService; public class ProductService{ public String getResults(String name) { String result = null; result = "Hi " + name + ", this is a service and the time now is : " + new Date(); return result; } } The services-config.xml is a standard like delivered within blazeds.war. My guess is that something is wrong is with the compilation. My Ant compile task looks like: <target name="compile_flex_examples"> <mxmlc file="${param1}" keep-generated-actionscript="true" context-root="${app.name}" services="${webinf}/flex/services-config.xml"> <compiler.library-path dir="${FLEX_HOME}/frameworks" append="true"> <include name="${webinf}/lib/" /> </compiler.library-path> <compiler.library-path dir="${FLEX_HOME}/frameworks" append="true"> <include name="libs/flex.swc" /> <include name="libs/rpc.swc" /> <include name="libs/utilities.swc" /> <include name="libs/fds.swc" /> </compiler.library-path> <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/> <source-path path-element="${FLEX_HOME}/frameworks"/> </mxmlc> </target> Any idea why Flex can not find the mx.messaging.channels.AMFChannel class? Any hint very appeciated. Thanks in advance. Devus

Did you have figure out the problem to this?
I am getting the same error message. I had two interdependant applications that were working fine when I specify a service-config.xml file at compire time. However when I try to dynamiclly configure the services at runtime, one application works, but the other doesn't. I'm not sure why mx.messaging.channels.AMFChannel is available in the one app, but not the other.
Any pointers???

How Do i add an inverted left channel to the right channel?

How Do i add an inverted left channel to the right channel?

http://www.thehangtime.com/gb/gbfaq2.html#audioeditors

[svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

"Subject" area is missing in the activity monitor

Hi Gurus..
I'm have a problem... in crm_dno_monitor the Subject is missing.. , when open the message it is available, but not appear in monitor.
Verified the Note 807044 - "Subject" area is missing in the activity monitor, but is obsolete. My SP is : SAPKU50009 (BBPCRM 500 level 09)
Thank you for help..

Hey Claudenir,
This note will help you.
Remember subject profile consists of catalogue, codes and so on.
And it's this "codes" that is visible in the dropdown of subject field in transaction type SLFN.
Note 1058960 - Enhancing the monitor display: Catalog/Code, Installed Base.
Please do reward for usefull post.
Revert for any clarifications.
Regards,
Anand

Show channels with own time channel and different length in one 3D graph

Hi,
How can i show channels with own time channel and different length in one 3D graph?
My consideration looks like this, but i didn't found a solution with acceptable performance. ( i have many channels to merge and many data in them)
i have 4 Channels 2 with values and 2 with time.
Example:
Pair 1:
1 - 3
2 - 4
3 - 5
4 - 8
5 - 9
Pair 2:
1.5 - 6
2.3 - 7
4.5 - 8
I want than this result:
1 - 3
1.5 - null
2 - 4
2.3 - null
3 - 5
4 - 8
4.5 - null
5 - 9
And
1 - null
1.5 - 6
2 - null
2.3 - 7
3 - null
4 - null
4.5 - 8
5 - null
thanks a lot
by
Stefan

Hi StefanF,
You need to first create the timebase that you want (in this case with a 0.5 increment) using the "Generate Numeric Channel" ANALYSIS function, then use the resulting time channel in the "Linear Mapping" ANALYSIS function for each of the original channel pairs.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Executing subroutine after commit work, not on commit work

Hi All,
I want to execute my sub-routine after commit work, not on commit work.
If any one have answer please mail me at [email protected]

Not sure if this helps you but this event is fired, when commit work is fired.
Christian
report test.
class lcl_event_handler definition.
public section.
    class-methods: on_commit_finished
         for event COMMIT_FINISHED
           of CL_OS_TRANSACTION_END_NOTIFIER.
endclass.
set handler lcl_event_handler=>on_commit_finished.
commit work.
class lcl_event_handler implementation.
method on_commit_finished.
break-point.
endmethod.
endclass.
But check also oss note 704577

How can I find the specific channel name and modify channel name in automatically in VBS?

How can I find the specific channel name and modify channel name in automatically in VBS? (DIAdem 9.1)
I would like to change channel name = "speed01" ... "speed10" to channel name = "velocity01"..."velocity10.
martino

Hello Martino,
this script will help:
Option Explicit
Dim i
Dim n
For i=1 To 10
If i < 10 then
n = CNo("speed0" & i)
Else
n = CNo("speed" & i)
End If
If n > 0 Then
If i < 10 then
ChnName(n) = "velocitiy0" & i
Else
ChnName(n) = "velocitiy" & i
End If
End If
Next
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

Comm channel missing in comm channel monitoring

Similar Messages

Maybe you are looking for