Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

Similar Messages

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?

There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira

Info area not seen in the "open query"window

Hi all
For some reason my Info area is not seen in the "open query"window, in the BEx Anal. can some tell me how to fix this.
Thanks
kavi

Hi kavi
I am not sure
Is it Business content infoarea, for me also business content infoarea is not seen, but in "open query" window if u select the icon for create new query,there it will ask for the cuben here u click binaculor icon for search and type ur infocube technical name there u can get ur cube.
Hoope it is helpfull........Let me know
Regards
NR
Assign points if it is helpfull

Process not visible in the Communication Channel Monitor

Hi there
I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
Thanks,
Jan

Hi again
I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
Destination
--Name (0-Unbounded)
Payload
--Details (0-Unbounded)
And my Target mapping I have
Main_Structure (0-Unbounded)
--FileDetails (0-1)
So the Destination determines the number of files and the payload goes to the File Details.
This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

Subfolders are not seen by the compiler

In an Actionscript Flash Builder 4 project, I have my main folder set to "src". All of the files within "src" compile. But I have several subfolders, each with several .as files, for example:
src
main.as
    module1
      mod1_1.as
      mod1_2.as
    module2
      mod2_1.as
      mod2_2.as
The subfolders are seen as packages in Package Explorer. Yet none of the files are seen by the compiler, and none of the files within compile. I can make obvious errors in the source files in these packages, but error messages are never generated. I thought .as files within subfolders would automatically be processed by the compiler. Is there a setting I'm missing?
Thanks,
Brian

Flex harUI wrote:
The compiler starts at the application and compiles it and anything it
references. Sometimes I'll just make the module the "default application"
until it compiles.
Yes, I figured out that I had to reference all the sub packages with "import" statements. Then the compiler sees them. This wasn't the case when the project was in Flash CS4. Everything compiled automatically.
I'm now having a problem with embedding fonts. They worked fine in Flash. I'll try a couple more things then may ask another question.
Thanks.
--Brian

Enabled users are not seen in the rtc database

Hi,
I have installed Lync 2013 into our environment and I am having an issue where users enabled for Lync are not able to log into the client, receiving the error:
"You didn't get signed in. It might be your sign-in address or logon credentials, so try those again. If that doesn't work, contact your support team."
We have an EE FE pool and all the AD prep and server install sections completed successfully.
When a user is enabled via the Control Panel or using Enable-CsUser, all the relevant attributes within AD are populated and visible in AD and the Get-CsUser command. However, running dbanalyze with /report:user returns the following error:
###50010:ReportUserData: [email protected] is not found in this database.
Also, running dbanalyze with /report:diag returns:
No contacts found in the database.
I have checked SQL profiler and can see similar issues to this post -
http://jamesosw.wordpress.com/2013/08/04/cant-sign-in-to-lync/ with the same errors in SQL Profiler and OCS Logger Tool, but we only have one domain, so this fix doesn't work and isn't relevant anyway.
Is there anyone who could shine a light on this problem?
Thanks,
James

Run
Update-CsUserDatabase and after 5 minutes Can we get the output of Get-csuserpoolinfo -identity "domain\username"
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

TS1702 doe's anybody have a problem with your Hero characters are not seen on the screen in CastleAge and know what to do about it?

Doe's anybody else have trouble with your hero characters not showing on screen and what to do about it. This is on CastleAge HD from Phoenix games ? This is on an Ipone4s.

You'll be more likely to get help with this if you ask in the CastleAge forums, I would suspect:
http://www.castleageforums.com/cforum/
Regards.

Type1 fonts are not seen in the system

$ fc-list | sed 's,:.*,,' | sort -u
lists everything except Type1 directory contents.
Meanwhile fc-cache searches and caches /usr/share/fonts/Type1
$ xlsfonts|grep nimbus
shows the font.
% xset q
Font Path:
/usr/share/fonts/100dpi,/usr/share/fonts/75dpi/,/usr/share/fonts/cyrillic/,/usr/share/fonts/local/,/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
infinality patches installed and gsfonts package.
What can be the problem?

In your infifinality.conf, located probably in /etc/fonts/infinality, there should be the following entry right at the beginning:


<selectfont>
<rejectfont>
<pattern>
<patelt name="fontformat" >
<string>Type 1</string>
</patelt>
</pattern>
</rejectfont>
</selectfont>
You will need to comment it in order to make your T1 fonts visible for the system, as instructed by the author of the file.
Last edited by bohoomil (2012-09-07 11:26:42)

USB videos are not supported by the head rest monitor?

HI,
I purchase an XAV712bt HU in India. The video out from the DVD/CD is displayed in both the screens (HU&Head rest moniter). But the video files in the USB is displayed only in HU and not in the head rest moniter.
Could you please any one help me sort this issue and get USB video output in Headrest moniter.
thanks,
Mahendran P

When is Apple going to ... allow us to use USB 3 on a Mac Platform.
Maybe in 2011 when Intel starts using it? There's a website for this here:
http://www.mac-usb3.com/index.html
You were simply cheated on ebay I think.
In any case, you can tell them what you want here:
http://www.apple.com/feedback/macosx.html

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Decimals not seen in the query...

Hi Guys,
I have a problem with the query..
I have loaded a KF with 2 decimal places in the cube.
But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
For e.g. the value of the KF in the cube is 9.85...but in the query, it is seen as 9
please let me know where do i need to make the changes.
FYI..the unit of the KF is %. Has this got anything to do with the problem ?
thanks in advance,
Punkuj...

Hi Aby,
Sorry, i just missed to mention this imp point :
I had done the operation that you have suggested :
I am getting the following output :
In the Cube : 9.85
in the query ( after the decimal selection) : 9.00
I hope that clears my problem..
Thanks..
Punkuj

Communication Channels do not appear in the monitor

I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
Is there some reason why these channels are not appearing?
Just for clarification; this is on a new XI installation.
Kind Regards,
Tony.

Hi,
import SAP basis software component into repository
as per question:
3. I can't see my adapters in the adater monitoring after the import of a new SP
on XI FAQ
for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Message Interface and Communication Channel are not getting in RW B

Hi
I have created a sceario in which i have created following things
2 - External Definition of Same XSD
2 - Data Types
2 - Message Types
4 - Message Interfaces
2 - XSLT mappings
2 - Interface Mapping
I have created on two scenario objects in XI ID.
But In RWB i can see only one sceario message interfaces and communication channels but the for other scenario MIs and Communication channels are not visible in RWB
I have created all the things in only one Namespace.
What could be the problem .please help me
Regards

Hi,
Have you activated it?
Can you see it in SXI_CACHE?
If one is no please run report SAI_CACHE_REFRESH
Kind regards,
Wojciech

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Similar Messages

Maybe you are looking for