Command button opens mission control, so I can't use it for other shortcuts

I have only had my macbook air for a few weeks, and I think I may have fiddled with settings before I had any clue what I was doing, as now every time I press the command key, it opens mission control, and I can't use command for other shortcuts... What have I done wrong and how do I undo it??? Help much appreciated!

I am having this issue, too, and Keyboard Shortcuts doesn't fix it, as I have not assigned Command to anything. It just states at the bottom "for additional choices press Shift, Control, Option, or Command," but doesn't seem to allow me to change these. Do you know of a way?

Similar Messages

Disk utility copying hard drive, can I use computer for other tasks

I had backup my entire hard drive and its taking forever, can I use other apps and continue to work ?
Thanks for any help!!

Best not, as files may be moved and therefore may upset the backup.

Can't open mission control after installing mountain lion

Mountain Lion is working smoothly for me except that I can't open mission control. I became aware of this because the "hot corners", which I use frequently stopped working for me. Maybe there's a preference file somewhere I can trash? I can't seem to find anything in the library.

I'm having the same issue. Not only the hot corners not work for mission contral, but neither do the keyboard shortcuts. A restart fixes the problem for me, until my iMac (2011) goes to sleep and is woken up again. After that, the mission contral functionality no longer works, and neither does the "show desktop" hot corner functionality.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Can i use BAPI_ACC_DOCUMENT_POST for clearing open items of credit memo

Can i use BAPI_ACC_DOCUMENT_POST for clearing open items of credit memo
If yes kindly let me know the import parameters and what this BAPI returns

Hi,
Use this
BAPI_PAYIT_POST_CLEARING
<b>Reward points</b>
Regards

Can i use BAPI_ACC_DOCUMENT_POST for clearing open iyems of credit memo

Can i use BAPI_ACC_DOCUMENT_POST for clearing open items of credit memo
If yes what are the values i need to pass yo this BAPI.
If not kindly suggest one with the values to be passed.

Hi,
Use this
BAPI_PAYIT_POST_CLEARING
<b>Reward points</b>
Regards

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
In my case, the MP Navigator app in the dock was linking to the wrong file.
It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon).

I have just bought an apleTV. I can't find the mirroring button on my toolbar, however I can mirror using Itunes, I have searched in systempreferences - Displays but it won't show me the Device. I have already tried restarting all. What am I doing wrong?

I have just bought an appleTV. I can't find the mirroring button on my toolbar, however I can mirror using Itunes, I have searched in systempreferences -> Displays but it won't show me the Device. I have already tried restarting the router, appleTv and Imac. What am I doing wrong?

A supported Mac
AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring::
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013)
Which Mac do I have?
How to identify your MacBook Air
How to identify MacBook Pro models
How to identify iMac models
How to identify Mac mini models

My iphone 4 button doesn't work. How can I use my phone without that working button?

my iphone 4 button doesn't work. How can i use my iphone without the working button?

Well if you restore your iPad that might work. If its a software issue, it might solve it. If that doesn't work, it might be a hardware issue that apple can fix.

Can I use JMS for this?

User logs into our administrative console, selects a job, clicks run.
Behind the scenes, the run command actually creates a job and returns XML which provides a long list of commands that need to be executed in order for that "job" the user triggered to be complete. This XML contains everything from shell scripts that need to be triggered to PL/SQL functions and stored procedures that need to be called...and they're listed in this XML file in the order they need to be executed and the next process in the list can only be executed when the process before it is finished. This all needs to go on behind the scenes, uninhibiting the user's experience on the website...so that's why I thought I might be able to use JMS but it seems everything needs to be written in java for this to work, which is a problem being I need to trigger runtime processes on the Linux box to execute shell scripts, which are not written in java...how would those shell scripts communicate with the JMS?
Anyone doing anything like this? Examples somewhere? It's kind of like a job management console...the jobs are pretty complex and can take up to 45 minutes or more to complete, which is why we need to come up with a way to run them from the app server, but in the background, asynchronously from the user's website utilization. This obviously, because of the time some of these take to complete, can't be a request/response architecture...
Thoughts? Help? Anything greatly appreciated.
Thanks!
rlb

          poorni wrote:
          > Hello everyone,
          > I need to send an alert message from the client to a server(which is
          > remote). Can I use JMS for this?.
          Yes.
          If so can anyone please suggest me
          > an open source JMS provider.
          WebLogic has JMS built-in.
          > Thank you,
          > poornima

How can I use TopLink for querys that have two and more tables?

I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
Thank you for see and answer this question.

You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
Zev.
check out oracle.toplink.expressions.Expression in the 10.1.3 API

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

Can you use wallpapers for the icons on the iphone 3g? If so, How

Can you use wallpapers for the icons on the iphone 3g? If so, How

On the Mac to save a picture from a web page <CTRL> click on the picture then choose Save Image As... and save it onto the desktop. Once you have collected all your pictures onto the desktop open iPhoto and Import all the images into an iPhoto Album. Quit iPhoto.
Open iMovie, then go to the Toolbar along the right side of the iMovie window and click on the camera icon to browse through your iPhoto Library. Find your pictures then drag them into the Project Browser window.

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Command button opens mission control, so I can't use it for other shortcuts

Similar Messages

Maybe you are looking for