Command-C does not always copy highlighted text

Sometimes, and annoyingly regularly, when I press command-C in Safari to copy the text does not actually get copied. I have watched and I can see the evidence of the command being acknowledged by the black flash of the edit menu in the menu bar. But it does not work. This problem is intermittent and it has happened when I used Mountain Lion or earlier, and now also in Mavericks. It happens on both my Macs. Does anyone else have this problem?

Have a look at your Keyboard shortcuts, go to:
System Preferences>Keyboard
Select the Shortcuts tab
Select 'Accessibility' on the left hand side, then scroll down to 'Show Accessibility controls' on the right. The default setting should be option-command-F5, if yours says Command-C, this should be an easy fix.
Good luck.

Similar Messages

HT4528 My IOS7.1 does not always deliver my text messages. I get "not Delivered." What is the problem?

My IOS7.1 does not always send my text messages and a get "Not Delivered" What is the problem?

Are the messages a green bubble, or blue?

IMAQ Copy function does not always copy Calibration Information

This only seems to happen on one PC in compiled form- works fine elsewhere. I wrote a trap to check for the existance of calibration information before the copy, and again after the copy to a newly created image. If the two disagree, the program breaks. The program breaks consistantly on one of my machines, but never on other PCs. Does anyone know what conditions can cause this to happen?

Hello,
Thank you for contacting National Instruments.
I don't know of anything in particular that would cause the IMAQ Copy function to not copy the pattern matching information on one particular machine. For troubleshooting purposes, I recommend checking for any and all differences between the working machines and the non-working machine. For instance, check the versions of all software that may be used by the application (especially NI-IMAQ and IMAQ Vision). How do the systems differ in hardware? Are they all the same make/model of PC? Are they all using the same IMAQ board?
Any differences you uncover may help us figure out what is causing this behavior. Let me know your findings so I can continue to assist you.
Regards,
Jesse D.
Applications En
gineer
National Instruments

I tried to paste text from another site into my Firebox document, but it says "Firefox does not support Copy & Paste". How do I enable clipboard? I never had problems like this on Firefox before...why?

I tried to paste text I copied from another site into my Notepad++ (as I've always done in the past with no problem).
But today for the 1st time, I got a message when I tried to paste the text "Firefox does not support Copy & Paste". What?
What happened to the clipboard?

That's a security feature in Firefox.
Use this extension to add the necessary permissions to Firefox - Allow Clipboard Helper: <br />
https://addons.mozilla.org/en-US/firefox/addon/852

My iPhone does not always send iMessages to other iPhones who have their iMessages on. Most times I text a new contact with an iPhone first, they show up as regular text messages. How can I fix this?

My iPhone does not always send iMessages to other iPhones who have their iMessages on. Most times I text a new contact with an iPhone first, they show up as regular text messages. How can I fix this?

Yes to receive an iMessage the recipient would need an iOS device (iPhone, iPod, iPad) and an internet connection. This is a messaging serviceprovided by Apple so the recipient does not need to check emails. If the contact does not have internet access at the time the iMessage is sent then a normal SMS through your carrier can be sent instead if you have "Send as SMS" turned on in Settings>Messages.

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

Shift-Command-R does not work anymore

Hello all,
I've noticed that the shortcut shift-command-r does not work anymore on my macbook pro. I used it for the calendar to refresh all calendars, and its also handy to open the reader in safari 5.
When I open the keyboard viewer from the language and text menu I can see it when I press shift, then command but when I press "R" nothing changes, only shift+command stay highlighted. Other letters do work, so its a bit strange.
Anyone know a solution for this?
Thank you in advance

Nope thats not the problem, the listening key is Esc. It is as if the keyboard does not register it when the R is pressed in combination with the shift and the command together. As I said, the keyboard viewer shows every keystroke except the shift-command-r combi.

New (1.5) add(*) method does not always equal to getContentPane().add(*);

Just came across something people might not be aware of,
The add(*) method provided in 1.5 does not always produce the same result as getContentPane().add(*)...
Setting the contentPane (of a JFrame) to a JTabbedPane should mean that when you "add" a component (using the add(somComponent)) you get (according to the documentation) a tab whose text defaults to c.getName(). However, when you call add(someComponent) you get no tab text....changing the call to getContentPane().add(someComponent) brings it back...
Bit odd....
Thanks,
Michael

I don't use 1.5 so I can't comment, but this months [url http://java.sun.com/developer/JDCTechTips/]Core Java Technology Tech Tip may (or may not) help.

Ordered Quantity does not get copied to Invoice by DIAPI

Hi All,
I am stuck with an issue in Invoice creation using DI API by code.The field Ordered Qty (DB Filed INV1.OrderedQty) does not gets copied to Invoice line from delivery lines. But while we add invoice from delivery >Copy To> AR Invoice , it gets copied to Invoice lines. This OrderedQty field is not exposed through DI API, so we cant set that field throgh code. What I do in Invoice creation code is as follows.
SAPbobsCOM.Documents oINV;
                    oINV = (SAPbobsCOM.Documents)
                        modups.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
                    oINV.CardCode = oDLN.CardCode;
                    for (int i = 0; i < oDLN.Lines.Count; i++)
                        oDLN.Lines.SetCurrentLine(i);
                        string str = oDLN.Lines.ItemCode;
                        if (i != 0)
                            oINV.Lines.Add();
                        //oINV.Lines.ItemCode = oDLN.Lines.ItemCode;
                        //oINV.Lines.Quantity = oDLN.Lines.Quantity;
                        oINV.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
                        oINV.Lines.BaseEntry = oDLN.DocEntry;
                        oINV.Lines.BaseLine = oDLN.Lines.LineNum;
                        taxcode = oDLN.Lines.TaxCode;
if (DeliveryExpenseCount > 0)
                            for (int i = 0; i < DeliveryExpenseCount; i++)
                                oDLN.Expenses.SetCurrentLine(i);
                                if (i != 0)
                                    oINV.Expenses.Add();
                                //oINV.Expenses.ExpenseCode=i;
                                oINV.Expenses.ExpenseCode = oDLN.Expenses.ExpenseCode;
                                oINV.Expenses.LineTotal = oDLN.Expenses.LineTotal;
                                oINV.Expenses.TaxCode = oDLN.Expenses.TaxCode;
                                oINV.Expenses.BaseDocEntry = oDLN.DocEntry;
                                oINV.Expenses.BaseDocLine = oDLN.Expenses.LineNum;
                                oINV.Expenses.BaseDocType = 15;
int retVal = oINV.Add();
                    if (retVal != 0)
                        int lErrCode; string sErrCode;
                        modups.oCompany.GetLastError(out lErrCode, out sErrCode);
Any help will be appreciated..
Deepesh

Hi Gordon,
Thank you for your reply.But it didnt fix the problem.The only change of previous code with this one was oINV.Lines.Add() method is called in the last of the loop.But it wont fix issue.
Updated on 20/10/2011
I have found the issue.The issue is causing if we update the resulting invoice's expense lines.
If we copy the expense lines from delivery and update any line with an amount it works fine and resulting invoice has "Ordered Qty" in its lines. Code is
for (int i = 0; i < DeliveryExpenseCount; i++)
                    oDoc.Expenses.SetCurrentLine(i);
                    if (i != 0)
                        oINV.Expenses.Add();
                    string s = oDoc.Expenses.TaxCode;
                    oINV.Expenses.TaxCode = oDoc.Expenses.TaxCode;
                    oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
                    oINV.Expenses.BaseDocLine = oDoc.Expenses.LineNum;
                    oINV.Expenses.BaseDocType = 15;
                    oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal;
                    if (radioButton2.Checked == true && i == 0)
                        oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal + Convert.ToDouble(txtExp.Text);
But if the delivery has no expense lines or we are adding a new expense line to the invoice while invoice creation from delivery , the resulting invoice does not have "Ordered Qty " in its lines..
Code is
if (DeliveryExpenseCount > 0)
                        oINV.Expenses.Add();
                    oINV.Expenses.ExpenseCode = 1;
                    oINV.Expenses.TaxCode = taxcode;
                    oINV.Expenses.LineTotal = Convert.ToDouble(txtExp.Text);
If I try to add lines
oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
oINV.Expenses.BaseDocType = 15;
to the above code it may show either "Internal error" or " No matching records found".
Is this a bug in DI API?

Media Encoder CS6 does not always "Use Previews"

I've attempted several transcodes using pre-rendered timelines in Premiere Pro. Media encoder does not always use the preview files despite the appropriate box being checked. Any suggestions what I can look for? I don't see that I am doing anything different between the times it works and the times it doesn't.
Bruce B.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

How do I fix this error in Visual Studio: The specified command ID does not exist

The entire error message is:
Error occurred in deployment step 'Retract Solution': The specified command ID 'Microsoft.VisualStudio.SharePoint.Commands.DoesSolutionWithIdExist' does not match any available SharePoint remote commands.
Parameter name: commandId
I'm developing an app for SharePoint Online using Visual Studio 2012. This error started after I created a developer site with "Spanish" as the language. Then I add "Spanish" to the "Supported Locale" in the appmanifest.xml
and tried to debug on the Spanish developer site.

Hi,
Based on the error message, it seems the specific command ID not exists in the “Microsoft.VisualStudio.SharePoint.Commands” namespace.
For a better troubleshooting, I suggest you do as the followings:
1. Add languages to Supported Locales in AppManifest.xml.
2. Try to debug you app project to see if there are something wrong in your code.
Here are some detailed articles for your reference:
http://blogs.msdn.com/b/officeapps/archive/2012/10/12/locale-support-information-is-required-for-all-apps-in-the-sharepoint-store.aspx
http://srichallagolla.blogspot.in/2013/03/sharepoint2013-debugging-provider.html
Best Regards
Jerry Guo
TechNet Community Support

Artwork does not *automatically* copy to iPod classic

We have 3 ipods in our hosuehold, one classic photo, one 3rd generation photo, and a nano from the latest generation.
All are managed manually.
On the older 2, artwork does not automatically copy across from itunes to the ipod when songs are added. Instead, I have to select each song or album on the itunes library, manually copy the artwork, and then paste it into the iPod. while not crippling, it is certainly annoying.
The nano does not seem to have this problem.
ANybody else have this problem, and is there a way around it?
Of course I have "display artwork" enabled on all ipods, and the software is up to date, on all ipods and on the mac.

I don't manually manage, so my apologies for not being really familiar with it. But my question is, have you noticed that the addition of artwork depends on if the artwork was there from the beginning or not?
In other words, I wonder if when put in a new CD, tracklisting is looked up, you import and artwork gets automatically added. You then drag and drop those tracks to your iPods. Does the artwork show up on the iPod or do you have to do a secondary addition of the artwork?
Versus, if you already had the songs on your iPod, then LATER added artwork to the tracks in itunes, I could see where unless you resynced the songs to the manually managed iPods, that the artwork wouldn't go onto the iPod automatically and would have to be manually added.
I mention this because your Nano is the newest one and I am wondering if the issue is that you have stuff on the older iPods from back before artwork was added to your library. You are now adding artwork, but the songs on the old iPods still have older versions without artwork. The Nano, being brand new, you are probably adding tracks that have since had artwork added and so it maybe seems like it is being automatically added to that iPod and not the others when maybe you just need to re-sync the same tracks to the others?
Again, just some random streams of thought and guessing.
Cheers,
Patrick

FireFox home page does not always display correctly, hence I cannot do anything

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

HT201272 Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'.

Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'. Any suggestions?

Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to.

LR4.2 and "Do not import selected duplicates" does not always work.

LR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

Command-C does not always copy highlighted text

Similar Messages

Maybe you are looking for