Command case 1 and 3 has no response data field ?

1. is command case 1 and 3 has no response data field ?
2. why jcop card return data field even if i send command with case 1 or 3 this not compatible to ISO 7816 specs ?
3. if the command has case 1 and 3, is response with data field and sw1 sw2 or no response data field just sw1 sw2 ?

Similar Messages

Create and maintain a payment run date field

Hello,
I have to use a payment run date on selection screen of my Bex report. The dates of payment run this year have been given to us. In order for this date to be maintainable (say for next year the date changes by one or two days) , what kid of object do i create in BI side ?
And how do i tell my Bex report that If i select this particular payment date, then data in the report will be corresponding to date only?

Hi,
You cannot create you own Time charactersitics in BW they are already delivered, examples are 0calday, 0calmonth etc, can you not use 0calday in this case and map the source date field from where ever you load the data to to this time characteristic?
Best Regards,
Des

I have installed iTunes on my new windows 7 dell laptop every time I start it it comes up with an error saying itunes has encountered a problem and it closes ? any answers have tried command prompt reset and it has not resolved it also un/reinstalled

I have installed iTunes on my new laptop OS Windows 7. I have two iphones, a 3rd gen nano and an ipod classic.
Since the install yesterday I keep getting an error message which itunes has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a soluion is available.
I have un and re installed and followed a command promt reset.
I still have the problem. Any ideas?

Ok. So I created a new account and iTunes did work. I went back into my original account and tried again and just to be more clear, after I open iTunes it asks me to accept or decline the agreement, I do that, then it says "updating library", and then one all the bars are full it closes and says "iTunes has encountered a problem and needs to close."
okay, let's start working through the user-account-specific causes of this message.
one possibility is damaged itunes preference files in the user account in which you're getting the crash. (there's a different set of those in each different user account, which is how we can get crashes limited to a single user account.)
if that is what is going on, we can often get past this by rebuilding the preference files in the account that is crashing. for the preference files rebuild technique, see my reply to kusma in this post:
b noir: Re: iTunes 7.0.1 crashing

Please help if you can, my user ID will not log on and it has all my data in it.

The primary user ID (an admin ID with all the valuable info I need access to) will not log on from a restart or initial power up. I was able to go into another user admin ID once and change its password which got me in once but now no passcodes will work.
The primary admin user will not log on at all. it doesn't give any error messages. It just flashs for a moment and then goes back to the user selection screen. I have the same apple ID on my iphone and can access all iCloud items associated with it. Just the user won't work. Another admin user and guest user work fine.
Before the user crashed we had some internet issues where it wouldn't log onto our shared network at our complex which has about a dozen registered users associated. Some sources have suggested that we were hacked and that security problems have shut down that user. We were in the British Virhin Islands when it happened. We are in the US now and the other user IDs are still working gone and the new Internet source was picked up through wifi without any trouble.
There is is so much info In that user ID that we need access to. I tried to use timemachine through the other admin but it will not reset through it. I have an external HD time machine backed up as of Feb 15 which would get us back most of the data, but I can't seem to reload that info either. Should I wipe out the whole system and start again? Maybe just erase that user? I'm not sure how to even do that...
thanks for for any and all assistance!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Upgraded my iPad to ios5.0 and it has wiped my data account so now I can only use wifi. How can I reset it?

E

If you re-download the apps to your computer's iTunes you could then try restoring to your backup and see if that restores them and their settings/content - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.

Export file (rtf and doc) has a cut off field

Hi,
I am using CR10/VB6/Oracle10.2
CrystalViewer shows the report preview fine then click the envelope icon to export file
(rtf or doc).
When I open the exported file (.rtf or .doc), there are some fields in the file is cut off .
Half of line of record is cut off horizontally.
This problem does not happen always. I don't know it depends on the record or not.
Does anyone have a same problem?
Thank you

Hi Sachiko
CR X is not tested with Oracle 10.2. This issue may occur since some of the dlls may not be supported. Hence you can try out the following:
1. Apply the latest Service Pack and check if you get the same issue.
2. Try using another Viewer and check if the issue still persists
3. Try upgrading CR X to CR XI R2 since CR XI R2 is tested with Oracle 10.2
Regards
Purva Naik

Ovi Mail and Outlook 2010; from/subject/date field...

I'm using Outlook 2010 version for my home laptop and tuesday evening all incoming mails missed information for sender, subject and the date/time fields. Connecting to Ovi mail by browser, all these information is existing on mails.
Is there has been change on server setup after moving to Yahoo servers??

Mail messages always include more headers than are normally shown by the mail client. Sometimes people may wish to examine the full set of headers to check the veracity of a message, or to determine its actual origin, and generally when trouble-shooting. You control whether or not you see them with menu View/Message/Long Headers, or you may have a button for it on your toolbar.
AK

Getting at Response data in a servlet filter??

Hi,
I'm hoping an expert would point me in the right direction.
I'm writing a filter that'll act like a proxy. It'll need to inspect the response data coming back from the server, and also forward the response data back to the browser.
As a first step, I've written a TestFilter that'll print the response data. When I go to print the response data in the TestFilter, it doesn't print anything! However, if I get print the contentLength of the response, it shows up as 3000!
I know response isn't null, as the page gets displayed on to the browser that makes the request.
How do I get at the response data?
Thanks,
--Sridhar
Here is the sample filter -
// HeaderFilter.java
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class HeaderFilter extends GenericFilter {
public void doFilter(ServletRequest req, ServletResponse resp, FilterChain chain)
throws java.io.IOException, javax.servlet.ServletException {
ServletContext context = filterConfig.getServletContext();
HttpServletRequest request = (HttpServletRequest)req;
CharResponseWrapper wrapper = new CharResponseWrapper((HttpServletResponse)resp);
chain.doFilter(request, wrapper);
System.out.println("******RESPONSE INFO******");
System.out.println("The response is " + wrapper.toString());
class CharResponseWrapper extends HttpServletResponseWrapper {
private CharArrayWriter output;
public String toString() {
return output.toString();
public CharResponseWrapper(HttpServletResponse response){
super(response);
output = new CharArrayWriter();
public PrintWriter getWriter(){
return new PrintWriter(output);
// Here is the output...
******RESPONSE INFO******
The response is

I'm still baffled!!
Here is the output I see in the console when I expect to see a lot more. This is the behaviour under both JRun & Weblogic. It makes me think that I'm missing something subtle!
Could the experts point me in the right direction? This is really stumping me & the deadlines are looming large :(
Output is -
*** TEST FILTER ***
************** RESPONSE DATA ***********
[B@2fb7ef
Here is the test filter implementation -
// TestFilter.java
import javax.servlet.FilterChain;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.http.HttpServletResponse;
import java.io.IOException;
import java.io.OutputStream;
public class TestFilter extends GenericFilter {
public void doFilter(final ServletRequest request, final ServletResponse response, FilterChain chain) throws IOException, ServletException
System.out.println("*** TEST FILTER ***");
OutputStream out = response.getOutputStream();
TestResponseWrapper wrapper = new TestResponseWrapper((HttpServletResponse) response);
chain.doFilter(request, wrapper);
System.out.println("************** RESPONSE DATA ***********");
System.out.println(wrapper.getData());
out.write(wrapper.getData());
out.close();
// TestResponseWrapper.java
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpServletResponseWrapper;
import java.io.ByteArrayOutputStream;
import java.io.PrintWriter;
public class TestResponseWrapper extends HttpServletResponseWrapper{
private ByteArrayOutputStream output;
private int contentLength;
private String contentType;
public TestResponseWrapper(HttpServletResponse response) {
super(response);
output = new ByteArrayOutputStream();
public ServletOutputStream getOutputStream() {
return new FilterServletOutputStream(output);
public byte[] getData() {
return output.toByteArray();
public PrintWriter getWriter() {
return new PrintWriter(getOutputStream(), true);
public void setContentType(String type) {
this.contentType = type;
super.setContentType(type);
public String getContentType() {
return this.contentType;
public int getContentLength() {
return contentLength;
public void setContentLength(int length) {
this.contentLength=length;
super.setContentLength(length);
// FilterOutputStream.java
import javax.servlet.ServletOutputStream;
import java.io.DataOutputStream;
import java.io.IOException;
import java.io.OutputStream;
public class FilterServletOutputStream extends ServletOutputStream {
private DataOutputStream stream;
public FilterServletOutputStream(OutputStream output) {
stream = new DataOutputStream(output);
public void write(int b) throws IOException {
stream.write(b);
public void write(byte[] b) throws IOException {
stream.write(b);
public void write(byte[] b, int off, int len) throws IOException {
stream.write(b, off, len);

New software has deleted all data!

i've just updated my iphone3GS to the new software and it has deleted all data including contacts, photos, text messages, apps etc! i've tried restoring it again and the latest back up i can get is may 2010!!! I back up my iphone on a weekly basis so realistically i should be able to get my latest back up but the option isn't there! any help would be appreciated!!!

Fixed my problem by re-booting phone. Which I shud of done to start!

Identify key fields and data fields

Hi
i have datasource 0co_om_cca_9 .
i want build 1 DSO, how can i identify what are key fields and data fields to build DSO based on that datasource.

Hi sunnel,
The DSO are like 2-D database tables.
We use the technical keys here in counterpart to the business keys in Infocubes.
The key fields are the one based on which the records are identified uniquely in the database table.
And the data fields are the ones which are aggrgated or summarised or overwritten based on the value in key filed.
For example:
The ID no.s of the employees will be unique and it can be used as a key field.
The feilds like the Salary taken by the employee every month :"SALARY"
and the no. of leaves they taken: " NO. OF LEAVES" can be used as data fields.
So that the salary or the leaves taken by a particular employee can be aggregated based on her/his ID no.
The key fields in DSO doesnty mean Key figures.The key field means any unique key or a key based on which the records are sorted in the DSO
And key figures are the data fields.Some of the Characteristics can also be data fields in DSO.
Please give points if u r satisfied wit the information
Also let me know if u hav any doubt and if any thing is wrong.
Regards,
Kalpana M

Recently downloaded Mac OS X Mavericks and Safari has become noticeably less responsive; slow to load web pages. Also, when Safari is open, the Finder randomly comes to the front. Any ideas?

Recently downloaded Mac OS X Mavericks and Safari has become noticeably less responsive; slow to load web pages. Also, when Safari is open, the Finder randomly comes to the front. Any ideas?

In fact, I am runing some plug-ins: ClickToPlugin (Flash blocker), Collusion and Disconnect.
There is quite a history of new versions of Safari breaking third-party plug-ins/extensions becasue the plug developer did not have an updated version available by the time the new Safari version dropped. What you report--worked fne before but won't now--is exactly what history says happens in such a case.
First, turn off all third-party stuff and see if Safari smooths out. Alternatively, create a new user account and, from there, test Safari in its native state with nothing added. That is a good diagnostic to see if the issue is a plug or extension.
If either of those helps, check for updates to the add-ons. If the developer is slow in reacting to the updated Safari version, (not unheard of), stop using that extension until an update is available.

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I ca

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.

You have posted in the wrong forum. Try posting in the forum for the product you are trying to use.
Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
Forum links page:
https://forums.adobe.com/welcome

I dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?

i dropped my iphone yesterday on its backside from my computer desk to floor.the distance is about 50cm. and it has a phone case. it did't work any vertical direction lock .then i restarted my phone, it recovered.but i am not sure is it ok ?

Good job with trying the two-button reset, that would have been my first advice for you. Next, I suggest you take the reset/update a step further. This step may risk losing the data on your phone, but since it's not working already, there may be no other solution.
On your computer, make sure you have internet acces and the latest version of iTunes installed.
Launch iTunes and connect the iPhone
Press and hold both sleep/wake and home buttons
After ten seconds, only release the sleep/wake button.
If you were successful, the iPhone screen should stay dark and the computer should display a popup.
If you see a message saying "iTunes has detected a device in recovery mode," then continue by clicking yes to each subsequent popup.
If the iPhone displays the silver Apple logo start over with step three of these instructions.

I joined a website using an id with a name using small letters. Firefox has automatically put a capital in my id. How do I remove it? The website is case sensitive and won't allow me in with my id with an initial cap?

I joined a website with my id in all small letters. Firefox has automatically made it with an initial cap. The website is case sensitive and will not allow me in. How do I remove the automatically set id password and start over so that I may have access to that web site? Thanks.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help

When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help

Hey marleyrose,
Thanks for the question. I understand that you are experiencing issues with your MacBook. The following resource may provide a solution:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks,
Matt M.

Command case 1 and 3 has no response data field ?

Similar Messages

Maybe you are looking for