Command Center + Android app for Z87-G45 Gaming

So I just got my Z87-G45 mobo and i7 4770k installed after a nightmare of dealing with a corrupt Windows installation, and this thing is SWEET!
I found that there's a Command Center app for Android, but it requires Command Center version 2.5.037 or above. The latest I could find when looking at downloads for my motherboard was version 1.0.0.16 before the MSI US site went down. Checked the EU site and it's the same story.
Is there a download link for Command Center 2.5.037 or is each download of Command Center specific to each motherboard?

Under very heavy loads the stock cooler is crap, anyone can tell you that. For lower price cooler a Cooler Master 212 is OK, for a better one at higher price Zalman 9900 is what I use now but did have the 212+ prior to the Zalman and really didn't have any complaints about it. Under extreme loads my CPU would get up to 75C max with 212+, with the 9900 61C max.

Similar Messages

Ram memory for z87-g45 gaming

Hello I would like to know what memory for this motherboard msi z87-g45 gaming with a 4770k Haswell processor, for this reason I would like to have the QVL (Qualify Vendor List) for this motherboard.
My research has been unsuccessful thank you in advance for helping.
pS: I would like to add 16GB inside the MB

Quote from: sefou974 on 29-July-13, 20:08:10
Hello I would like to know what memory for this motherboard msi z87-g45 gaming with a 4770k Haswell processor,
for this reason I would like to have the QVL (Qualify Vendor List) for this motherboard.
My research has been unsuccessful thank you in advance for helping.
pS: I would like to add 16GB inside the MB
http://ark.intel.com/products/75123/
Max Memory Size (dependent on memory type) : 32 GB
Memory Types : DDR3-1333/1600
Any 16GB DDR3-1600 kit at 1.5V runs just fine on this motherboard.
If you want something to run "out of box", I recommend a Corsair Vengeance or Dominator kit.

Case Badge for Z87 - G45 Gaming

A month ago , I purchased an MSI Z87 - G45 from my local computer store here in PH. The first board had problems like unable install USB drivers, unable to install Killer LAN, and doesn't include a case badge. I had the board replaced after a day and issues like USB and killer lan have been resolved but, the replacement board doesn't have a case badge again. I asked the store personnel if other MSI boards have it, they found none even in the Z87 -GD65 board. I've seen a lot of unboxings in youtube that the Z87 - G45 mobo included a gaming dragon case badge. The question is, can I still get an official case badge directly from MSI?

You won't get it here, as MSI does not participate on this forum. I would contact the customer service email for the country where you reside. I had a missing badge as well, and was able to get it shipped from MSI directly.

Best way to flash Bios for z87 G45 Gaming mobo?

Alright guys. My computer has been acting up a little bit recently with any USB devices on the PC tower iself acting up. Both the 3.0 ports and the regular 2.0 ones too. Constant disconnects. Think it's time to update my Bios. Currently running 1.5 and I believe that 1.9 is the most recent.
What's the best way to flash the Bios. I've done it before via the flash tool about a year ago but cant remember anything about how I went about it.
Is this still the best way? Any tips and hints on what to do, and more importantly, what not to do.
Will I have to update the ME version too or will that be done at the same time.
I see in Live Update that there is also a new bios for my GPU (MSI GTX 970). Should I let Live update install that for me?
Any help would be appreciated.

Use the later beta: https://forum-en.msi.com/index.php?topic=169943.msg1311514#msg1311514 (follow flash instructions there)
For the vga what GTX 970 is it? -> https://forum-en.msi.com/index.php?topic=167763.0

MSI Z87-G45 GAMING VGA Driver for Windows 8.1

I have a MSI Z87-G45 GAMING motherboard. I want to know when a driver for Intel On-Board VGA Drivers will be released for windows 8.1 because most of the applications (Visual Studio, windows photo viewer, etc.) are all crashing on windows 8.1 but worked fine on windows 8.
Driver Version installed: 9.18.10.3215

Quote from: xSpartanx on 23-October-13, 12:29:55
I have a MSI Z87-G45 GAMING motherboard. I want to know when a driver for Intel On-Board VGA Drivers will be released for windows 8.1 because most of the applications (Visual Studio, windows photo viewer, etc.) are all crashing on windows 8.1 but worked fine on windows 8.
Driver Version installed: 9.18.10.3215
The latest one is 10.18.10.3316 (released 2 days ago):
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23339&lang=eng&wapkw=windows+8.1

How to get Super-Charger to work on Z87 G45 Gaming MB.

Hi, how can I get the MSI Super-Charger app to work on the MSI Z87-G45 Gaming MB?
There is no Super-Charger item in the Windows Taskbar like it does with the MSI P67A-G65. I have "Show all icons" set for the Taskbar and the latest Super-Charger software update is installed. When I click on it, it just tells me that the Super-Charger is already running. However, I can't see the icon to open it up to change any settings like I can on the P67A-G65 Motherboard.

Quote from: hpipiw on 25-November-14, 09:47:03
Z87-G45 Gaming doesn't have red USB charging port.
So it wouldn't show the icon, but when you plug in a device for charging, it seems will show a remind message to tell you it's charging.
Without this you can't use Super Charger. I know it's on the disk that came with motherboard (same happened to me) but without this red USB header you just can't use it. If you would have this usb header, then your device (whatever would it be) would charge even if the PC would be off.

How to increase maximum buffer memory on MSI Z87-G45 Gaming,s1150?

good day,
is there a way to increase the maximum buffer memory for PCI-E X16 ports? e.g. a bios setting that allows this?
here are my specs:
- 2 x XFX HD7950 Double Dissipation (FX-795A-TDFC)
- MSI Z87-G45 Gaming,s1150
- Intel Core i3-4130,s1150
- 1 x TNAV6R00 Corsair RM1000 (Gold standard)
- ICIDU Value DDR3 1333 (2x4GB)
- Windows 7 Home Premium 64Bit

perhaps I can be a bit more specific regarding my problem
I am using above described rig for mining purposes. One of the related performance variables is 'thread concurrency' (CGMINER). it is currently set to value 8192, corresponding to about 512mb of buffer memory for the PCI-E ports. I can not increase it, as i get the error that the system is out of buffer memory. Thing is, the system should have a lot more. The PCI-E cards hav 3GB each and my system ram is 2x4GB.
one relate variable I am already using is the following command line
setx GPU_MAX_ALLOC_PERCENT 100
this usually solves above problem, but not in this case...
anybody got any ideas?

MSI Z87-G45 Gaming, sound from USB mouse?

Hi!
I have some issue from my new computer, see spec below.
For the information I have a MSI Z87-G45 motherboard.
I have some sound that occurs sometimes (specially during the first 2-5 minutes) when i move the mouse around.
It occurs as well sometimes when I been using the computer for a while, basically random just more frequently at the start-up.
It's hard to know from where the sound occurs, could be PSU but today I read something on another forum about the motherboard I'm using:
- Higher sound quality using USB, thanks to special adapted current power.
So i wounder if this can be the case? Is that the reason why i get this noise from inside the computer?
Is there some way to disabled this "feature" in BIOS?
Greetings
|Asus 24" LED VG248QE 144HZ (2st) | EVGA GeForce GTX 780 3GB PhysX CUDA | Intel Core i5-4670K | MSI Z87-G45 Gaming, Socket-1150 | Corsair SSD Force Series GS 240GB 2.5" | Fractal Design Define R4 Black Pearl | Crucial DDR3 BallistiX Tactical 16GB | Corsair TX 850W PSU | Noctua NH-U14S CPU Kylare | CM Storm QuickFire TK Keyboard Brown | Ace Laser Gaming Mouse EDGE 3200 | QPAD XXXL |

The sound sounds like the old mechanics hdd kinda.
It comes inside the computer, not the speakers.
My feelings is that it can be the PSU as well, just wanted to check this first, since it most often comes when i move my mouse.

Flashing Z87-G45 GAMING bios

Hi I'm in need of new bios for my motherboard Z87-G45 GAMING current version is 1.A0 (out of the box) and latest ME drivers .
I will be using MSI Forum HQ USB flashing tool.
Windows 7 64 bit
Thx for all the help in advance.

Quote from: Chike on 24-March-15, 02:36:00
You do not need to update BIOS just because "it is the latest version", flashing BIOS is always a risk, do not flash unless you really need to, e.g. it resolves hardware compatibility issue that you have. If it works. don't fix it.
+1
But if you want, well, we can't stop you but advise you how to do it and how to not brick the board
With MFlash and Forum tool it's always different story.. both can flash it perfectly fine, but if you get a single byte error in a file or other thing that can corrupt something while flashing, either can brick it. Use what you prefer to use.

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

MSI Z87-G45 GAMING.. does the killer networking work with Windows 8.1?

I was scrolling through the reviews for this board and someone mentioned in the reviews that the killer networking isnt supported with windows 8.1 yet.
Is this still true or are there updated drivers for windows 8.1 now?
Thanks.

There is a driver posted on MSI's website for 8.1.
http://www.msi.com/product/mb/Z87-G45-GAMING.html#download

MSI Z87 G45 GAMING erratic BSOD/freeze @ 2300, stable @1600. Can't solve.

Hi All,
I would welcome some advice. I am about 4 months into a new machine build:
* MSI Z87 G45 GAMING motherboard
* i7-4770K Haswell 3.5 GHz & aftermarket heatpipe cooler
* 4 x 4Gb G.Skill SNIPER DDR3-2133 PC3-1700 (F3-17000CL11D-8GBSR)
* GeForce GTX 650 Ti w/ 2 Gb Video RAM
* Samsung 840 Pro 256 Gb SSD
* Thermaltake 700W Toughpower
* Win 7 Pro 64-bit SP1
The system seems to run fine at the default 1600 MHz RAM speed, however if I implement either of the X.M.P. profiles (which kick the memory speed up to the RAM's advertised speed of 2133 MHz), the system will occasionally (every 8 to 48 hours) freeze or BSOD. The BSOD stop codes are inconsistent in number (0x00, 0x41, 0x1E, 0xC4) and driver. When the system freezes, there is no consistent behavior. I am not doing any other overclocking besides using the X.M.P. profile in the memory.
RAM timing on the 2133 X.M.P. profile is: 11-11-11-30.
I have updated the BIOS to 1.5, including the ME, and updated all drivers in the system. All irrelevant hardware and drivers are disabled. Also I have done the following:
* MemTest+ 5.01 for over 30 hours, all 4 sticks in. No errors.
* Intel BurnTest on 'Very High', 10 passes, no errors
* Prime95 for over day with 90 C CPU temps constantly being hit. No errors.
* Unigine Valley Benchmark for 30 minutes; no issues
I increased V_DRAM from 1.60V (from the XMP profile) to 1.65V, and I also added +0.10V offset to increase the CPU I/O ANALOG , CPU I/O DIGITAL and SYSTEM AGENT voltages. Didn't seem to help. All other CPU voltages are default from [auto].
I rolled the memory speed back to the default 1600 MHz, and the system seems stable as a rock.
I don't really need to have the memory run at 2133 MHz, but it irks me that the system is not stable with the rated components, and I'm befuddled why the stress tests seem to pass just fine, then the system will randomly hang with arguably a far less demanding load than the stress tests.
Note that I have not yet:
* reset the CMOS when changing to X.M.P. Perhaps I should?
* reseated the graphics card or CPU. The latter will require R/R of the thermal grease, which I will do if needed, but it's a pain. Since the system is stable at 1600 MHz, I assumed that all basic systems are working as they should.
* Tried to work my way up in memory speed step by stem from 1600 to 2133 to see where things fall apart.
* Tested the video memory
I suspect main system memory, despite the clean bill of health from MemTest, and based on many of the comments to others with similar problems from the veterans on this board. I don't want to push the CPU voltages too much above the default/auto values, for fear of damage and reduced lifetime.
Also, the power supply is a nice unit from an older high-end gaming rig. It is rated at 700W. The PS does probably have over 30,000 hours on it (24/7 use for 3-4 years), however. Strange that it would work at 1600 MHz fine, and with only slightly more power load at 2133. I suppose stranger things have happened.
I've read the suggestions to run only 2 sticks, rather than 4, but I can't justify dropping $140 on new memory (I don't really need the extra speed benefit, it's more curiosity and just not knowing at this point).
Anyway, perhaps more seasoned souls than I can share their thoughts. The system is perfectly usable at 1600, but I'd really like to know where the lockups are stemming from. Troubleshooting is maddening because of the inconsistency in the long times before failure and lack of repeatability to reproduce the issue.
Thanks in advance for your time.
-Paul

Thank you both for the prompt replies. I'm learning a lot.
Turns out I also found this from G.SKILL in going over reviews of the memory modules I have. Another user had a similar configuration as mine and was having similar problems. G.SKILL replied:
Quote
We are sorry to hear you were unable to get two kits working in the same system. It is not guaranteed two kits can operate at the rated specifications since they were not pre-matched, tested, and guaranteed at factory. With multi-channel motherboards, perfectly matching memory is necessary to achieve high frequency. This is why we must offer high capacity 32GB, 64GB kits, otherwise we can just sell one module at a time and have you purchase as many as you need. Unfortunately, memory does not work that way. If you purchase a 16GB kit rated at DDR3-2133, you should have absolutely no issues. For any further questions or concerns, please feel free to contact us directly for assistance.
Thank you
GSKILL SUPPORT
Not knowing any better, I simply purchased two "kits" of 2x4 GB each and installed them. Perhaps worse, if the modules were matched, I may well have mixed them up so the matched modules don't even sit in the same channels 1/3 or 2/4. G.SKILL seems to have a pretty responsive board, so I'll ask them what they suggest.
Also in the end, I really just want a stable machine. This is a basically an office/engineering machine. My initial thinking was that if the system was unstable at 2133 then there is something wrong with it that needs to be fixed. It sounds instead like getting to 2133 is not guaranteed, and is much more of an art than simply throwing the modules in and powering up the system.
I'm perfectly happy at 1600 knowing the system is stable. Indeed realizing now that 2133 requires overclocking, I may well have backed off to 1600 even if everything had worked just fine at 2300, just to trade extra stability for the (small) performance improvement that I would likely never notice anyway.
I'll put together a post for the G.SKILL forums, and if I get anything useful I'll post what I learn here for completeness.
Thanks again for the fast and informative replies. It's much appreciated.
Best,
-Paul

Msi z87-g45 gaming, no display, no beep.

I am building a gaming computer. When i turn on my computer the cpu fan spins quickly then immediately slows down to a slow spinning state. My Boost audio light is on as well. But i get no display. I have tried the DVI HDMI and VGA outputs. I also accidentally pressed the cmos button while the compute was on. I also removed my mobo battery for 5 mins. Oh and on top of all that i dont have my standoffs. So maybe the board is short circuiting. But if that was the case my is my cpu fan remaining on as well as my boost audio light?
Here are my specs:
Ultra 550w ATX Power Supply
2 DDR3 in slots 2 and 4
Cpu with no bent pins (that i can tell)
Thanks for your help.

Im having exactly the same problem did you manage to get it working in the end?
The board has been tested by aria computing and came back fine they have also replaced the RAM and CPU incase they were the problem. Il list all the things Iv tried so far. Thing that gets me is there is no beep when I turn it on so something is wrong and im banging my head against the wall not being able to figure it out.
Checked both power connections many many times
Check for shorts
Changed power supply
Changed RAM (and tested in all configerations)
Tested 3 monitors on all ports (onboard DVI, VGA and HDMI)
Put 3 GPU's in it as well and tested all ports on them
Tested on a low end CPU
Tried out of case with just power leads and a monitor connected (no HD,USB,frount audio)
Reset COSMOS and checked the battery
Here are the specs
Intel Core i5-4670K 3.40GHz (Haswell) Socket LGA1150 Processor
MSI Z87-G45 GAMING Intel Z87 (Socket 1150)
16GB Mushkin Enhanced Silverline #997018 (2x8GB) 1333 (PC3-10666) 240-Pin DDR3 SDRAM CAS 9-9-9-24 1.5V
XFX Double D FX-785A-CDJ4 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express Graphics Card
Antec TP-750w
WD 500GB sata green Hard drive
240GB Crucial M500 2.5" SATA 6GB/s (SATA-III) Solid State Drive
Please help if you have any ideas :(

MSI Z87-G45 Gaming not entering setup or boot menu

Please someone help, I am getting no setup or boot menu, case & CPU fans come on, drives come on, led's come on, but blank screen.
I took out the graphic card & ram sticks, pulled the plug for leds & case fans, took all cables off HDD's, now only cpu & one stick of ram in dimm 2 connected + power switch.
plugged vga cable direct in MB, blank screen, then plugged cable in MB HDMI, blank screen.
tested monitor, ram & power supply in my sons computer which is a x58 LGA1366, all worked well.
I have no means of testing motherboard or cpu.
specs:
MB: MSI Z87-G45 Gaming
CPU: i5-4670k
RAM: Crucial Ballistix Tactical 1866MHz 9-9-9-27 1.5v
PSU: Corsair CS650M
I also tried another PSU a Thermaltake AP850W
P.S.
I have reset all i.e. pulled plug, taken battery out, pressed reset & shorted the two reset pins next to battery.

newer board are different they need at least a CPU to even show a code as they use that to activate the BIOS and if they do not have that it will FAIL to post anything as the board is used as a backbone as nearly all the important stuff is on the CPU itself (Processor, IMC, SATA controller, Network Controller, VRM (on Haswell), GPU and many other things) so it will fail to post as before it was only a processor but now there more of a system on chip really and has most of the important stuff that used to be on the Board itself so without that the Motherboard is just an electrical plane with impressively limited connections as all the good stuff is now on the Processor that you do not have!
There is not much that you can tell till you at least get that CPU as the board has nothing to work with as there is nothing to process the signals from the BIOS so its just a useless item so shows nothing.

MSI Z87-G45 Gaming running the second gpu @ x2 speed

Hi i have a problem with my second gpu running x2 while my main gpu stay's @ x16 but it's suppose to be 8 and 8 ?
Here are my specs:
MSI Z87-G45 Gaming
I7 4770K - H80
G.Skill 16GB 1600Mhz
XFX Radeon HD6990 + Sapphire Radeon HD6970
I'ts the Sapphire running at x2
Kind regards MojoW

I don't really know if your non-identical cards working fine when combined crossfire.I think two identical card either for crossfire or sli are the best solution to avoid troubles. Apart from that ,you have enabled your crossfire setting from your driver ,right?(and your driver is up to date,I suppose)
Edit:
P.S though Having a dual gpu card combined with a single gpu one with crossfire...I think that's impossible.

Command Center + Android app for Z87-G45 Gaming

Similar Messages

Maybe you are looking for