Command Center upgrade to 1.0.0.68 does not adjust CPU Ratio

Hello,
I had a previous version of Command Center. I believe it was 1.0.0.48. I was able to use it to adjust the CPU ratio OK.
However, it kept asking that I upgrade to the latest. I finally did this and now the new version (1.0.0.68) will not adjust the CPU Ratio.
I am using the Z87-GD65 Gaming board, with the 1150 socket, operating in Windows 8.1 64 bit.
I  have the i5 4670k cpu.
I would like to revert back to the original version, which I believe is Command Center 1.0.0.48, but I cannot find a link to it anywhere.
Can you please provide a link to it?

I mean that when I set the CPU ratio to say 39 and then I click APPLY, the CPU ratio stays at 34.
Command Center will show it's at 39, but Real Temp still shows it at 34.
When using the older version, I set the CPU ratio to 39, then click APPLY, the CPU ratio goes to 39.
Real Temp will show it's at 39.
Version 1.0.0.68 will not adjust the CPU ratio.
Also, I can install Command Center from the DVD that comes with the MSI board. It is even older than 1.0.0.48 (right now, I cannot remember the version, but it is older). I am able to adjust the CPU ratio to 39, then click APPLY and the CPU ratio is now at 39.
Real Temp will show it's at 39.
Not the case with 1.0.0.68.
Anyway, is there anyway I can get version 1.0.0.48?

Similar Messages

  • After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

    I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

    Hi ..
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Back to Safari. Press Command + Option + E to empty the Safari cache.
    Quit and relaunch Safari, try a video.

  • After upgrading to mountain lion my calendar does not print in weekly mode anymore

    after upgrading to mountain lion my calendar does not print in weekly mode anymore

    I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
    Could be the Mountain Lion objective-c framework has a buffering issue.
    Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
    Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
    My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

  • After upgrade to snow leopard my printer does not work. shows that is idle but get a error message that printer cannot be found

    after I upgraded to snow leopard my printer does not print. I get an error message that says printer cannot be found. my printer status says my printer is idle, but is green.

    You forgot to mention what printer you have, but you may need a new driver:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Since upgrade to Windows 8.1, ICloud does not work

    Since upgrade to Windows 8.1, ICloud does not work.  I could click on buttons for Reminders, Notes, etc. and would take me into ICloud to share with other devices. No longer functions.

    Hi:
    I can't help you with why your PC won't upgrade to W8.1, but I can tell you that if you manage to get W8.1 to install, you won't be able to get the graphics to work anymore.
    There is no W8.1 driver for the graphics setup in your PC.
    So maybe it is a good thing that you can't get it to work. 

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    Have you tried changing the order in Network Preferences pane?
    Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
    Hope this helps
    PJRS

  • IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • I made an upgrade to Mavericks and my iPhoto does not open, what should I do to recover iPhoto?

    I made an upgrade to Mavericks and my iPhoto does not open, what should I do to recover iPhoto with all my photos?

    what happens? What version of iPhoto do you have? For Mavericks you must have iPhoto '11 version 9.5 - if you own any version of iPhoto '11 it is a free update - if you own a previous version then you must purchase iPhoto '11 in the App store
    LN

  • After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

    I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
    I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
    Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
    My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
    I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
    Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
    Any help would be appreciated. Thank you.

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • PI 7.30: OS command on AIX to archive files on FTP does not work

    Dear experts,
    Our PI system runs on an AIX server.
    I have a scenario PI --> FTP. I also need to archive files in a seperate folder on the FTP.
    I have been following thread:
    Read or Write File On FTP server based on another file existence.
    After file processing in the Audit Log in RWB I among others I get the information:
    Execute OS command "sh /usr/sap/SYS/flex/batches/archive.sh file.zip /ftpfolder/file.zip"
    It seems it is working properly.
    The file itself gets processed to the "ftpfolder". But in the archive folder I do not get a copy of that file.
    My script looks like this:
    #!/bin/ksh
    ftp -n -v <<%%EOF%%
    open ftpserver
    user myuser mypassword
    prompt
    asci
    cd archivefolder
    mput $2
    bye
    %%EOF%%
    In the file receiver I have "Run OS command after message processing":
    "sh /usr/sap/SYS/flex/batches/archive.sh %f %F"
    %F stands for the complete path, right? So if I say "mput $2" in my script it should use %F.
    Could you please help me out here. I really don't know what the problem could be.
    Thank you and best regards,
    Peter

    hi Peter,
    >>>I have a scenario PI --> FTP
    but FTP does not support OS command as far as I remember
    correction:
    "Note that for the File Adapter transport protocol "FTP", the operating system command is NOT executed on the FTP server, but on the server hosting the Adapter Engine."
    please check for details:
    Note 841704 - XI File & JDBC Adapter: Operating system command
    Regards,
    Michal Krawczyk
    Edited by: Michal_Krawczyk_PIXI on Feb 3, 2012 3:38 PM

  • Cat0-3750 upgrade. Error: system number 1 does not support the same feature

    I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
    Ios Image File Size: 0x00877A00
    Total Image File Size: 0x00B04200
    Minimum Dram required: 0x08000000
    Image Suffix: ipservicesk9-122-37.SE1
    Image Directory: c3750-ipservicesk9-mz.122-37.SE1
    Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
    Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
    Error: The image in the archive which would be used to upgrade
    Error: system number 1 does not support the same feature set.
    Any ideas?
    Chris

    I was having the same issue even with entering the following:
    archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    I noticed the image which was running on the switch was correct without the ".bin" at the end:
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
    I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
    3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
    Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
    [OK - 24893440 bytes]
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
    Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    examining image...
    extracting info (100 bytes)
    extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
    extracting info (100 bytes)
    System Type:             0x00010002
      Ios Image File Size:   0x017BDA00
      Total Image File Size: 0x017BDA00
      Minimum Dram required: 0x08000000
      Image Suffix:          sm10g-150-2.SE7
      Image Directory:       c3kx-sm10g-mz.150-2.SE7
      Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
      Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
      FRU Module Version:    03.00.78
    Updating FRU Module on switch 1...
    Updating FRU FPGA image...
    FPGA image update complete.
    All software images installed.
    Worked for me, hope this helps.

  • Just upgraded to iPhoto 11.  slideshow does not work. just is black.

    I just upgraded to iPhoto 11.  I am on a MacPro desktop.
    Slideshow does not work for either the existing slideshows or to create new one.
    Just a black screen.  When you click on the slideshow button it fades for a microsecond like it is going to go to slideshow...but then just a black box where teh photo should be.

    Can you view the photos normally at full size?
    Regards
    TD

  • Upgraded to Yosemite and now camera does not work.  Please help.

    I just bought a new iMac 27" computer today.  I brought it home and it told me I needed to update my iOS.  So i did.....now my camera does not work.  Does anyone know a fix?
    Message was edited by: MCO98

    Scott SV wrote:
    Hi there - I just completed a leopard upgrade. Strangely enough, after installation and the subsequent reboot, i cannot get the finder to work. Upon clicking on the finder it just sits there and gives the 'waiting' signal (rotating multicolor circle). I opened the activity monitor and killed it, clicked again. nothing. Rebooted numerous times.. nothing. I also tried to install the leopard software update. The files download fine but will not install. I assume this has to do with the finder problem. Any ideas on how to fix this? thanks!!
    There are really two "Finders," the one in the dock and the one that actually runs the GUI.
    When you click on your desktop, you see the Finder menu on the top right. Do any of those functions work?
    For example, if you click Go->Home, does the Finder window open as normal?
    If so, you may simply have a corrupted Finder alias in your dock.
    I would first run DU and perform a disk check and repair permissions.
    How to get to DU? Again, if the top right Finder menu works, select Go->Utilities and run DU from there.

Maybe you are looking for