Command+Click in bookmarks isn't working properly

before I updated the recent security update, the function works just fine in bookmarks.
In Safari, command+click is suppose to open a link in a new tab section (it's set under the safari preferences). This command+click works under bookmarks as well. However, after I installed the recent newest security update, the shortcut key doesn't work properly.
I usually would only need to hold down command and click "once" on the link in bookmarks. But, now I have to click "twice" or even "3" times to open the link in a new tab. It's annoying because sometimes it may open 2 of the same link. (my keyboard and touch pad work perfectly fine)
Is it just me? Or anyone else has the same problem?

Shutdown and flip your machine over to check the fit of the battery compartment cover, and then the battery itself. An apparently common problem is battery swelling which both pushes the cover down/out, while pushing up on the underside of the trackpad, causing strange inputs/behaviors.

Similar Messages

Back to my mac isn't working properly

After downloading Mavericks, (which went without a hitch), I am now receiving an error in system preferences stating: Back to my Mac isn't working properly
because the DNS server isn't responding. Contact your internet service provider for a different DNS server address, enter it in Network preferences and try again.
In reality everything wireless is working; the internet the printer iPad works fine.
I went to the Airport utility and clicked on my Time Capsule and it states: Change Airport base station from using DHCP and NAT to Bridge mode.
I done that and everything related to the wireless router runs real slow, I mean real slow. It took just under 4 minutes for my Time Capsule to recognize the computer. Due to this I received all kinds of errors from the printer from Airport Utility and the iPad.
I need a fix please, I've read all the support documents related to this in the support community and either the answers given I have tried with no success or they do not relate to my situuation.
Thank you for looking at this, I only hope you have a valid answer.
Jerry

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

Convolution.vi isn't working properly

I'm using LabView 7.0 and I'm trying to performing a convolution with the convolution.vi. This VI isn't working properly. As you can see in the attached file, the result isn't right even for very small input arrays. The result also depend on the input data format (singel or double etc.)
May be someone had the same problem, or knows something about it. I'm using LabView 7 on an Windows NT system, may be that has something to do with it.
Would be greatful about every hint,
best regards Andy
Attachments:
example_convoultionvi.vi ‏18 KB

Very strange...
Can you open the diagram of the convolution.vi, then double-click on the "Call Library Function Node". What is the Path? (It should be C:\Program Files\National Instruments\LabVIEW 7.0\resource\lvanlys.*).
Could ot be yours points somewhere else?
Now find the lvanlys.dll in explorer. The size of the LabVIEW 7.0 version should be 528384 bytes.
Do a search for lvanlys.dll. How many different versions show up?
LabVIEW Champion . Do more with less code and in less time .

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

HT1267 My iPod player in my iPhone isn't working properly it will play for a few seconds then stop and also the volume level will appear then disappear what can I do to remedy this?

My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!

If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues.

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

Hello, not too helpful, but...
enum {
paramErr = -50, /*error in user parameter list*/
Usually means a bvad or unacceptable Charachter in a File or Folder name...
http://support.apple.com/kb/TA20831
Solving Trash Problems...
http://thexlab.com/faqs/trash.html
Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

"Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
There is no documentation on how to solve this anywhere.
I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
Any help would be much appreciated
Kenneth

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

[svn:osmf:] 9850: Removed full screen code since it isn't working properly.

Revision: 9850
Author:   [email protected]
Date:     2009-08-31 13:01:06 -0700 (Mon, 31 Aug 2009)
Log Message:
Removed full screen code since it isn't working properly.
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml

You have a tool, that doesn't work in a new version of java.
The tool vendor would be the one to determine whether the tool and/or the new VM has a problem.

Music player isn't working properly, there's no time slider

Since I updated my iphone4 to the latest software my fast forward bar in my music player has gone and I can't drag the song along to the desired place in the song. Please help

alexi sonlian wrote: my in-built webcam isn't working properly...
uf Applz http://support.apple.com/kb/HT2090 dunt helllppp, ("resot" sumtymz helllppp,) mak a gud bakkup. Than "... contact Apple or an Apple-Authorized Service Provider for service."
Same helllppp 4 iSight werkz 4 FaceTime n FaceTime HD camz 2.
alexi sonlian wrote: is it because of updating softwares or sumfin like dat? anyone?? helllppp!!
 > Software Update...
Messij wuz eddditubed by: EZ Jam
Mac OSX 10.7.4

HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

"Save link as" in Right-click Context menu is not working properly.

Firefox 17: In a Google search, when I right click on a .pdf link, the popup window automatically gives a "url" filename and "Firefox Document" as filetype. Previously, the filename would be whatever it was on the website (ie. "filename.pdf") and the filetype would be "Adobe Acrobat Document".
I know this problem has less to do with Firefox and more to do with JavaScript, because the problem disappears if you disable JavaScript (Tools -- Options -- Content -- uncheck "Enable JavaScript"). What's happening is that JavaScript is somehow altering the link from a purely .pdf link to something else -- perhaps encasing the link inside a set of commands, and the computer is trying to save the command string instead of recognizing the link for what it is. When JavaScript is disabled in Google searches, the highlighted "[PDF]" link no longer appears in front of the link itself, and the "Save link as" function on the right-click works properly.
Any JavaScript junkies want to try their hand at creating a workaround? One that ensures that the reference created by the right-click context menu matches exactly what the filename is for the website?

The problem is that Google has an onmousedown attribute added to the links that modify a link if you click or right-click a result link to make the link point to a safe browsing check on the Google server.<br />
You can see that if you hover a link and you will notice that after you have (right) click a link the the URL changes to www.google.com/url?xxxxx.
You can use this bookmarklet to remove the onmousedown attributes.
<pre><nowiki>javascript:(function(){var e=document.querySelectorAll('*[id="search"] a[onmousedown]'),E,i;for(i=0;E=e[i];i++){E.removeAttribute('onmousedown')}})()</nowiki></pre>

My US ATV in the UK isn't working properly. Can anyone advise please?

My friend bought me an ATV from the US, but I can't seem to get it to work properly.
It's plugged into a US-UK adaptor, powers up fine, got past the point where I connect to my network. It's just when I get to the main menu screen, it freezes up - staying stuck on the Movies > Top Movies tab.
I try and reset through the remote - no luck. Tried cutting the power and try again - no luck. Tried connecting to my MacBook to restore it through micro USB - won't even recognise the device!
I'm losing the will to live with this - just want the thing working!
Is there something I could be doing wrong, or something else I should test?

If you've not done so remove all other USB connections from the Macbook - if there isn't enough power (usually with non-powered USB hub connection) it may not be detected or restore.
I think it should have an international warranty - do you have a nearby Apple store where they could have a look at your gift?
It's possible you have a faulty AppleTV but firmware issue could also be to blame - was it unopened and unused?
I understand your frustration, though it may just be a bad one.
Also try just connecting power and HDMI if you had ethernet or anything else connected.

Command+Click in bookmarks isn't working properly

Similar Messages

Maybe you are looking for