Command+Delete not working in iTunes 10.1.2

Just noticed this since updating. The 'Delete' option under 'Edit' is not selectable and the Command+Delete option yields no results.
Anyone else have this problem?

It's been intermittently working for me. Dragging the song to the Trash does not work either. Usually a restart takes care of it but I've also repaired permissions as well as an Archive and Install of the OS. Odd.

Similar Messages

  • Command + delete not working in Preview

    I use the Command + Delete keyboard shortcut all the time on my MacBook Pro running Mountain Lion to quickly delete multiple images in preview. The shortcut seems to be disabled on my iMac running SL, however. To the best of my knowledge it used to work before. How do I fix this?

    ⌫ is the symbol for the erase to the left (normal delete) key
    ⌦ is the symbol for the erase to the right (sometimes, also labeled delete) key
    From Keyboard Viewer                                                 From Apple Store picture

  • Go to current song (command L) is not working in itunes 11

    Go to current song (command L) is not working in itunes 11, anyone having the same issue?

    Thanks for figuring that out.
    I thought that command-L was working when I first switched to iTunes 11, but then it wasn't working anymore. That's the ticket: I changed the display to show the sidebar.
    Still, I'd like to be able to use the command-L feature whether I'm showing the sidebar or not.
    I'd also like it if iTunes would keep showing the currently playing song when in Grid or Artist view modes. It doesn't, so I have to keep using command-L to see the current song info.

  • Delete command does not work

    delete command does not work.. it just freezes neither roll back happens.. please advice

    Always: If possible, give the exact command & output from your terminal, pefrerrable with copy & paste. We cannot see your screen and magically spot the problem.
    In general, you should also include your database version and OS, although I doubt that this is relevant in this particular case.
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.

    DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.
    As we have gone through the source code(Airplay
    Audio POSIX receiver v190.9.p6) in dnssd_clientshim.c file and in API DNSServiceGetAddrInfoResponse has provided the implementation for ipv4 only.
    The test setup to test the DACP over IPV6 is by disabling the IPV4
    from MAC book and only enabling the Ipv6 .
    We are not sure if the test procedure is correct, please clarify the same.

    Hi,
    It is because of the license. In WS-C3750X-48P-L, you have a LANBASE license whereas in WS-C3750X-24P-S you have an IPSERVICES license.
    FDR_SW#show  version 
    Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
    License Level: lanbase
    License Type: Permanent
    Next reload license Level: lanbase
    In a LANBASE license, ip routing and ip multicast commands are not supported.
    Hope  this helps.
    Thanks,
    Arun

  • ITunes RADIO is not working.  "iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again." Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so -  iTu

    iTunes RADIO is not working.
    “iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
    iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
    Simply put, firstly, I can't connect to the internet when I click on Radio.  People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
    Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
    Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
    Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
    Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
    Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
    Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
    ===============================================================
    NOTE:  no password for iTunes exists in my Keychain. Is this a problem?
    Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
    Apple store id It works via direct internet connetion but not through iTunes.  Very strange.
    ===============================================================
    FYI, Hardware Overview:
      Model Name:                       MacBook Pro
      Model Identifier:                 MacBookPro8,2
      Processor Name:               Intel Core i7
      Processor Speed:               2 GHz
      Number of Processors:    1
      Total Number of Cores:    4
      L2 Cache (per Core):         256 KB
      L3 Cache:                            6 MB
      Memory:                              16 GB
      Boot ROM Version:            MBP81.0047.B27
      SMC Version (system):      1.69f4
      Serial Number (system):   C0*******F8V
      Sudden Motion Sensor:
      State:   Disabled
    Intel 6 Series Chipset:
      Vendor: Intel
      Product:            6 Series Chipset
      Link Speed:       6 Gigabit
      Negotiated Link Speed:           6 Gigabit
      Description:      AHCI Version 1.30 Supported
    M4-CT512M4SSD2:
      Capacity:           512.11 GB (512,110,190,592 bytes)
      Model: M4-CT512M4SSD2                         
      Revision:           040H   
      Serial Number: 0000000012330912E75A
      Native Command Queuing:    Yes
      Queue Depth:   32
      Removable Media:        No
      Detachable Drive:        No
      BSD Name:         disk0
      Medium Type:      Solid State
      TRIM Support:     Yes
      Partition Map Type:     GPT (GUID Partition Table)
      S.M.A.R.T. status:         Verified
      Volumes:
    disk0s1:
      Capacity:           209.7 MB (209,715,200 bytes)
      BSD Name:         disk0s1
      Content:            EFI
    disk0s2:
      Capacity:           511.25 GB (511,250,432,000 bytes)
      BSD Name:         disk0s2
      Content:            Apple_CoreStorage
    Recovery HD:
      Capacity:           650 MB (650,002,432 bytes)
      BSD Name:         disk0s3
      Content:            Apple_Boot
      Volume UUID:   600737FB-7A29-3BAE-859E-CBFE2E90C39A
    <Edited by Host>

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • 6120 classic:My voice commands do not work

    Please help.
    Don’t know if I'm just being stupid or there is something not right with my 6120c.
    My voice commands do not work.
    If I press the button for a voice command, it says that there are no voice tags saved.
    If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
    Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
    Also, I don’t have voice tags on my contacts??
    I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
    Somebody please help.

    I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

  • Overdrive Media console not working with iTunes when transferring audio books.  Any suggestions?

    Overdrive Media console not working with iTunes when transferring audiobooks.  Some parts don't transfer.

    Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
    Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
    An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books.

  • My iPod touch is not working in iTunes, but it is showing up on my "My Computer".

    My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • My apple id is not working in itunes. why?

    my apple id is not working in itunes. why?

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • Host command is not working on linux

    Hi
    I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
    Any help is appriciateable.
    kazi mokarem

    Hi
    I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
    The path where mkdir is located may not be visible to the app.
    Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
    If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
    HTH
    Arvind

  • Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

    Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

    My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

    See here -
    Recovery Mode
    http://support.apple.com/kb/HT1808
    iPad not showing up in iTunes on a PC
    http://www.apple.com/support/ipad/assistant/itunes/
    iPad not showing up on a Mac
    http://support.apple.com/kb/TS1591

  • External command is not working in File Receiver Adapter

    Hi,
       I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
    File Name: copy1.bat
    @ECHO OFF
    COPY %1 C:\TEST1\arch_t1
    COPY %1 C:\TEST2\arch_t2 
    COPY %1 C:\TEST3\arch_t3
    DEL %1
    The command which I entered in the Receiver CC (File Adatper is)
    Run Operating System Command After Message Processing
    Command Line: C:\FILES\copy1.bat %F %f
    Timeout(secs): 60
    Terminate Program After Timeout - Check box is selected.
    But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
       I did this scenario by refering the Michael'w weblog:
    /people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
       In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
        I use Windows XP OS. XI 3.0 SP 18.
       Friends, Could you kindly tell why this external command is not working? What could be the problem?
    Thanks in advance.
    Kind Regards,
    Jeg P.

    Hi, Jeg.
    As the note says, please check the java Runtime.exec behavior
    with the proper user.
    If in doubt, check if the command can be successfully run through
    the Java Runtime.exec(...) API. Also note that the command is run
    as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
    So, Could you check the following(very dirty one!) Java in your
    XI server and check if it works? For simulating %F, create a test
    file C:\FILES\test.txt whatever the content is.
    import java.util.*;
    import java.io.*;
    public class ExecJava {
      public static void main(String args[]) {
        try {           
          Runtime rt = Runtime.getRuntime();
          Process proc = rt.exec("C:/FILES/copy1.bat C:
    FILES
    test.txt");
        } catch (Exception e) {
          e.printStackTrace();
    Good Luck.
    Sejoon

Maybe you are looking for