Command-F in Safari 3 for OSX 10.4.11

How do I get the traditional behavior of command-F back in Safari?
Thanks,
Emilly

You don't.
Safari has changed the design of the "Find" command to use this new method of display.
Send them "feedback" if you don't like it.

Similar Messages

I have an older iMac desktop with OSX 10.6.8 on it. I mistakenly added a Safari update for OSX 10.9 and now I can't access Safari at all. Is there anyway to uninstall the .0.9 update and keep my old bookmarks, etc. or do I have to delete it ?

I have an iMac with OSX 10.6.8 & I mistakenly added Safari for OSX 10.9 on it and now I can't use Safari. Is there any way to uninstall the newer Safari and leave my older version with its bookmarks, etc. or do I have to delete it and reinstall the proper update ?

Let it go... these DL's take forever, depending on the spped of your connection and the traffic on the servers.
If by morning it is still sitting there restart and the DL should pick up from where it left off.

What is the latest Safari revision for Mac OSX 10.4.11

I have a vintage Mac G3 B/W Desktop PPC, which still operates perfectly. But, at times Safari 4.1.3. periodically crashes. Is there a later revision that I can upgrade to? Software Update says the computer is up to date.

Niel,
I am sorry it has taken so long for me to respond to your post, but I have isolated my Safari crashes to my system not accepting some new RAM that I instaled. You posted that Safari 4.1.3 was the latest version for OSX 10.4.11,Tiger,followed by a statement"Not on a G3 (85970)". What did you mean by this statement and is the 85370 an Apple document number? I need to update my system information. My system still is a G3 B/W PPC, but I have upgraded the Processor to a G4, if that makes any difference

Haven't been able to use Safari Browser for months, it keeps crashing seconds after I launch it

I haven't been able to use my Safari Browser for months. Each time I launch it, it crashes.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Enable Bootcamp to install from usb for OSX 10.9**WORKS**

So basically, I have trying to install windows on my mbp using a usb drive. However bootcamp wont allow me to do so since I have a optical drive on the laptop. I have been searching for a long time and eventually came across this solution and I would like to share this so u guys dont have to google all over the place again .
The solutions given before by changing info.plist is correct except that now Bootcamp crashes everytime you change it in OSX 10.9.
Full solution:
1. Add your Boot Rom Version(from system info) under DARequiredROMVersions.
2. Add Model Identifier(from system info) under PreUSBBootSupportedModels
3. Delete "Pre" from "PreUSBBootSupportedModels", so you have "USBBootSupportedModels"
The first 3 steps are same as before and if its not clear you can easily google solutions with screenshots.
The next step is only for OSX 10.9, as it employs some kind of code signature to prevent you from changing info.plist and cause bootcamp to crash.
4. Open your terminal, use the following command
sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app
Sudo means using administrator privilege and u need to enter your mac password. And the command resigns the bootcamp application so that it runs with the new info.plist file and not crash.
5. Continue on with your installation....
Cheers.
P.S. back up info.plist before u change anything.

do you have multiple partitions on your USB stick? And what partition table does it use?
I have two windows installers. One is on a 4GB single partition fat32 formatted stick, and one is on a 5GB partitions of a 500GB USB HDD. On the USB HDD I have windows as second partition. First is OSX installer. I noticed that I can boot in BIOS mode with the 4GB USB stick, but not with the 500GB USB HDD.
So try a windows formatted USB stick with a single partition. See if that works.
Be carefull with google.. In the last few days I have been researching some bootcamp related things and there is waaaay more wrong information of people that tell others what they 'heard' than that there is right information of those who know how stuff works.
I am of the 2nd category btw. I only tell you what I know for sure. If an '06 macbook with ODD can boot of of USB into BIOS mode, then so should you.
Edit: The reason the Windows EFI installers says it found an MBR partition only is because by default the disk is in GPT mode with a 'protected' mbr so that non-gpt aware programs wont look and scream "free space! ".
In order for Bootcamp to install in legacy BIOS mode it converts this 'protective' MBR into a "hybrid" MBR. If you download the open source app "Gdisk", install it, and type "sudo gdisk /dev/disk0" in terminal you will see there is either a protective or hybrid MBR on the disk.
Formatting a disk to fat32 with any OSX tool (BC Utility or disk utility) will convert the protective MBR to Hybrid MBR.
Gdisk allows you to reset this to a protective MBR as described here: http://superuser.com/questions/508026/windows-detects-gpt-disk-as-mbr-in-efi-boo t
Hybrid MBR: Full Bootcamp compatibility. OSX knows whats up and decides everything. Windows installs in legacy BIOS mode on an MBR type disk.
Protective MBR: Bootcamp utility and OSX are not used since they would convert the disk to a hybrid MBR. This mode is compatible with booting in EFI mode. EFI compatible Windows versions (7 partially, 8 completely) will live alongside OS X, for the most without problems. And will install on a GPT type disk.
Hope to have helped you with this. Took me three full days of non-stop reading to figure this out.
Message was edited by: Jognt
Edit 2: Make damned sure you have a backup of your system. Messing around with partition types and tables shouldnt hurt when you know what you're doing. But since I know this for three days, and you apparently havent found this yet, I think it's safe to say both of us aren't yet 100% sure of what we're doing .
Message was edited by: Jognt

Some pages don't render properly after Java update for OSX 10.6.8

I can't seem to get T-mobile.com's website pages to render properly anymore. So far, this is the only website I'm having this issue with, though there could be more I'm not aware of.
I go to www.t-mobile.com and this is what I get:
I think I might be missing a plug-in, but not sure; if so, I don't know which one or how to get it.
This only started happening after the latest Java update for OSX 10.6.8, which I installed on Feb. 24, 2013. All of T-mobile's pages look like this, except if I go to www.my.t-mobile.com's home page. Then I get a normal page, but after I log in, I get more wierd rendering issues again. So here's the page that appeared normal today:
And after I log in successfully, I'm back to the wierd rendering issues again:
I was so lost but then I decided to try a work around to get my online bill and managed to get it, but I don't want to see the pages like this. So help please?

So, here's more on my point...
I put in the 3 captured screen shots in my original post above. I used Grab to copy the web pages, saved them to my desktop as .tiff files and dropped them in for others to view. This morning, I went to look at my post and instead of seeing the screen shots, I see 3 tiny blue boxes with question marks. When I left click on the boxes, nothing happens. When I right click on them, I get options that are not helpful:
Open Image in New Window
Open Image in New Tab
Download Image
Copy Image Address
Import Image
Capture Selection from Screen
Convert Selected Traditional Chinese Text (why the frack is this an option?)
Convert Selected Simplified Chinese Text (or this an option?)
I checked my Safari Preferences and I see I have checked, under Security, Enable plug-ins, Enable Java, Enable JavaScript.I have to have Java enabled to run a few things.
Did something get corrupted in Safari?
Am I'm missing some plug-ins?
How do I get them back?
I'm going to search the internet. Well, after doing the search, I still don't think I've got what I need. Thinking I might need to reinstall Safari. If this is the case, will I loose all my Bookmarks?

HT201222 Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Command-tab between Safari and another application

When I command-tab between Safari and another application such as Word, when I return to Safari I am on a different web page. When I use History to return to the page I want, I have to sign back in again. How can I fix this?

It's CS4 6.0.3 on OSX.
The other application is a web app in development.
My guess now is Flash compiles the fonts and it sees Antihistory regular as Antihistory book and our website is expecting regular.

WHAT IS THE BEST ANTIVIRUS SOFTWARE FOR OSX YOSEMITE?

WHAT IS THE BEST ANTIVIRUS SOFTWARE FOR OSX YOSEMITE?

Here are some more thoughts to consider.
There will always be threats to your information security associated with using any Internet - connected communications tool:
You can mitigate those threats by following commonsense practices
Delegating that responsibility to software is an ineffective defense
Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "clean up", "speed up", "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
Illegally obtained software is almost certain to contain malware.
"Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements.
If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it.
The same goes for a spontaneously appearing dialog insisting that you upgrade your video player right this instant. Such popups are frequently associated with sites that promise to deliver movies or other copyrighted content that is not normally "free".
The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

What is the FASTEST Internet Browser for OSX? (2014 Edition)

What is the FASTEST Internet Browser for OSX? (2014 Edition)
I'm a tech junkie, I love everything about technology.. especially FAST and EFFICIENT technology..
I am currently using Google Chrome, and have nothing bad so say about it.. I like that I can "sign in" to Google Chrome pretty much anywhere (including my iPhone 5s), and instantly have access to all of my Bookmarks and Bookmark folders..
I have seen a bunch of benchmark tests testing a bunch of available internet browsers on OSX.. however, the results seem a bit inconclusive and varying, and some that even support the notion that Safari is now FASTER than Google Chrome.. I'm not sure whether or not to believe it, and I don't really have the time/energy to conduct a series of tests on my own..
What do you guys think? Is Google Chrome still considered the "fastest" when it comes to browsing/downloading?

Has anyone used or have any opinions about Lightning? I found some positive reviews around, and granted they all mention it's unrefined, they all seem to think it is the fastest. Great as that may be, before I fork out the $2 I would like to get some more info regarding privacy and security.
https://itunes.apple.com/us/app/lightning-web-browser/id412736557?mt=12
A review
http://mac360.com/2014/04/lightning-strikes-is-this-the-fastest-mac-web-browser- money-can-buy/

Install Flash Player 9 for OSX

I’ve installed Flash Player 9 for OSX and it
doesn’t seem to work. I’m not experiencing anything
similar to previous threads. I don’t get any errors and the
installation seems to go fine but when I return to any site that
requires Flash Player 9 it tells me that I need to install the
latest version, which I’ve done. I’ve even uninstalled
and then reinstalled with the same result. Did I miss something
here?

I have been having the same problem since installing Leopard.
I have tried suggestions from others:
there are no browsers running when I install Flash Player
I have repaired permissions (both before and after
installing)
I have uninstalled before reinstalling
None of these work. I am unable to view Flash content in
Safari, Firefox or Internet Explorer. I am using a G5 Mac desktop
and have had no previous problems with the Flash player on this
machine.

WTK SDK 3.0 for OSX problem with capturing audio, emulator

Hello all,
i'm installed the WTK SDK 3.0 for osx and everything works well. Some test applications also work.
Now I'm trying to realize my project and get strange error.
I want to capture some audio form the microphone. But when i do so the Emulator strikes with this error:
javax.microedition.media.MediaException: Player cannot be created for capture://audio
so i tried this: System.getProperty("supports.recording") and it returns false. But when i read over the specification of the WTK it says that it should support the Audio capturing. Is this error based on the implementation of the WTK on OSX or have some Windows users also the same problem?
here is my implementation for the Audio recording:
public void commandAction(Command comm, Displayable disp){
        if(comm==recordCommand){
            try{
                p = Manager.createPlayer("capture://audio");
                p.realize();
                RecordControl rc = (RecordControl)p.getControl("RecordControl");
                ByteArrayOutputStream output = new ByteArrayOutputStream();
                rc.setRecordStream(output);
                rc.startRecord();
                p.start();
                messageItem.setText("recording...");
                Thread.currentThread().sleep(5000);
                messageItem.setText("done!");
                rc.commit();
                recordedSoundArray = output.toByteArray();
                p.close();
            } catch (IOException ioe) {
                errorItem.setLabel("Error");
                errorItem.setText(ioe.toString());
            } catch (MediaException me) {
                errorItem.setLabel("Error");
                errorItem.setText(me.toString());
            } catch (InterruptedException ie) {
                errorItem.setLabel("Error");
                errorItem.setText(ie.toString());
        } else if(comm == playCommand) {
            try {
                ByteArrayInputStream recordedInputStream = new ByteArrayInputStream
                      (recordedSoundArray);
                Player p2 = Manager.createPlayer(recordedInputStream,"audio/basic");
                p2.prefetch();
                p2.start();
            } catch (IOException ioe) {
                errorItem.setLabel("Error");
                errorItem.setText(ioe.toString());
            } catch (MediaException me) {
                errorItem.setLabel("Error");
                errorItem.setText(me.toString());
    any help would be grateful!
thx and greetings
Edited by: nYmou on Jun 1, 2010 3:44 AM

Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

Latest Java for OSX -- Up-To-Date? Where's new?

I sure could use answers from you Gurus out there, or pointers to where I can get the straight poop. TIA.
I use a non-Apple produced Chat application (gabbly) that I believe is written in Java. One day last month, this app suddenly lost its graphics. Some buttons became invisible, though their mouseovers were still visible, and if I wait till the mouseover shows up to show me I'm still on the invisible button, "it" will work. Other graphics work wrong, also.
I use adblock in FF, but no joy if I turn it off.
I cleared all FF cookies with "gabbly" in their names; no joy.
In Safari, the app kinda works better -- graphics are there, but some buttons work wrong.
Curiously, another Mac on the same LAN shows the app working fine under FireFox 1. (that rev UTD, OSX UTD) So it's probably some machine-dependent thingie...
I'm not a developer, just a random end-user...
MacOS 10.4.9 (Up-To-Date)
FireFox 2.0.0.4 (UTD)
Safari 2.0.4 (419.3) I believe this is UTD, I install all Apple updates to OSX...
QuickTime Version 7.1.6
Repair Disk Permissions on my startup disk (where all these apps live -- not done yet, necessitates starting from another disk, which I could do...
The Java test at http://www.java.com/en/download/help/testvm.xml says that I'm "using an older version of Java technology" and that a new one, 1.5.0_07 from Apple, is available.
HOWEVER! Under the Apple Operating System of that same display, is gives my current JRE version is 1.3.1 for OSX 10.2.7.
So, how can it be possible that my 1.5.0_07 is an "older version" of Java, when the lower segment of the same URL's display offers me 1.3.1 ?
And should I downgrade from 1.5.0_07 to 1.3.1 ? To me, it looks like Apple's version of Java is more advanced than the version now on offer from java.com...
Or should I re-install the latest Java from Apple, which another string has pointed at, at http://www.apple.com/support/downloads/java2se50release1.html ? This is all so confusing...

I agree, the Java version numbering could have been better implemented. Supposedly there is something called Java 2, which has been out for awhile that's included in it. Some people here might have a better answer for that:
http://discussions.apple.com/forum.jspa?forumID=727
I don't understand why the numbering system isn't clearer.
Apple does have this page on Java which may be of some help:
http://www.apple.com/macosx/features/java/
And Wikipedia has this page:
http://en.wikipedia.org/wiki/Java%28programminglanguage%29
As you can see J2SE is actually numbered 1.1.4 through 1.6.
You might also want to consider these chat alternatives:
http://www.applechat.info/

Disable middle button for osx while in Parallels

I've been trying to accomplish this for hours, maybe someone can help:
I need to use AutoCad for PC, so I run a Windows XP VM in Parallels 7. In OSX (Mountain Lion) I have assigned Mission Control for the middle button of my mouse (Logitech V470).
When I try to pan in Parallels's AutoCad, as obvious, it activates Mission Control. How can I disable the middle button for OSX only if I'm working in Parallels, so when I go back to OSX it will continue to launch Mission Control. Am I explaning my self good enough?
Thanks for your help!!

Actually the middle button on a mouse has a specific function in OS X and you have overwritten that. If you hadn't it would work as it should in Win XP for ACad. You need to remove that change of assignments and go back to Default.
There also may be an isolation feature in Parallels where once you are in Parallels the mouse and keyboard commands are only relayed to the OS in parallels. Not sure as I use VMware Fusion.

HT5275 how do I update to Safari 6 for OS X Lion

How do I update to Safari 6 for OS X Lion

Hi,
Safari wasn't working in my macbook (crashes every time) and I cannot update using Software Updates. You can update to Safari 6:
1. Open command window
2. Copy and paste:
curl -s $(strings /System/Library/PrivateFrameworks/SoftwareUpdate.framework/SoftwareUpdate | grep http | grep sucatalog) | grep Safari | grep pkg | sed -e s/"<string>"//g -e s/"<\/string>"//g -e s/\ //g
3. Must show valid download URLs. Copy Lion link and paste in your browser.
4. Wait download finish.
5. Execute pkg.
This solution works for me! Lion 10.7.5
Found in:
Safari Quits Every Time Opened

Command-F in Safari 3 for OSX 10.4.11

Similar Messages

Maybe you are looking for