Command for properties

Hi all,
Does anyone know the command in UI configuration for just the properties that exist in the details?
Best Regards
Natasha

Hello Natasha,
      There is a command called "properties" that allow you to see details of a document. Only these tabs (system, custom, so on)
       All commans can be found in:
In system administration->system configuration->km->cm->user interface->commands
      When you run properties command (it's the same that execute from context menu: details->setting->properities)
you can see some tabs (system, custom, access links, so on) each one of them contains metadatas.
      This detail appears depending on resource type of document. Obviously you can create new resources type and define new tabs with your metadatas for this kind of document. If you do that, when you run properties command you should duplicate this command and pass as parameter this new resource type. (All that is customizing from portal)
      In system administration->system configuration->km->cm->user interface->details screen->default you can see a part of this customization. You should not modify it, you can define a new one.
      In order you can understand better this configuration you have to read:
      Working with Metadata Properties in KM.pdf
      You can find here this document if you have any problem let me know and I send you.
Patricio.

Similar Messages

  • Need example vi using AT commands for dialing the modem at the remote end

    Can any one give example vi for dialing up a modem and sending data to remote end

    Hi sindhu6,
    Presuming that you are connected to your modem via a serial connection:
    I did find a forum related to your enquiry: http://forums.ni.com/t5/LabVIEW/AT-commands-in-labview/td-p/1213335
    And I did find an example from ni.com: http://zone.ni.com/devzone/cda/epd/p/id/2577
    Basically, what you need to do is to find out what are the AT commands used for your modem and send the command over using VISA related functions (e.g. VISA Read VI). You can send the command in a sequantial method. You can do this by using the method found in the first link. The best would be that you can create a state machine where by each case/state will consists of commands that you need to run in a sequence (let's say a sequence of AT commands for sending a message via TCP/IP communication).
    You can also use a sequence structure but I would not suggest that since you cannot stop the sequence half way and if your command is very long, this may look pretty messy for your code.
    The main question is:
    What is the version of your LabVIEW?
    What is the modem that you are using and how is your hardware setup is going to be (e.g. how did you communicate with your modem)? 
    Thank you
    Warmest regards,
    Lennard.C
    Learning new things everyday...

  • Questions on Commands for planning application

    Hi,
    1. Where can i get the information on commands for planning functions?
    2. What is the difference between
    ---Execute planning function simple and -
    Execute planning function
    3. I create planning layout with few buttons
    a. Copy: I clicked on the copy button and can see the data in the layout
    b. Save: Clicked on the save icon, Data saved into the planning cube
    c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
    Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
    When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
    Thanks
    Annie

    Hi Deepthi,
    Thanks for your reply.
    I did as you mentioned and its working as expected.
    User wants something like this
    1. Execute the planning layout.
    2. Click on the copy function
    3. Save the data
    4. Click on the change button so that data can be changed now.
    As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
    I did the following things but didnt work
    1. Save button i have two commands
    a. Save data
    b. Set_item_parameters
    2. Change button> disable>set_data_entry_mode.
    After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
    I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
    Thanks
    Annie

  • How can I use custom WLST commands for Oracle SOA Suite in Weblogic

    Hi There,
    I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
    I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
    However, my WLST shell is not recognizing the commands and giving me the NameError!
    wls:/devDomain1/domainRuntime> listLogs()
    Traceback (innermost last):
    File "<console>", line 1, in ?
    NameError: listLogs
    I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
    I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
    - Launched the WLST shell from Oracle Home.
    cd ORACLE_HOME/common/bin
    ./wlst.sh
    - Tried to run the listLogs command from domainRuntime()
    I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
    I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
    There is no SOA Suite installed.
    Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
    Please advise if this is possible and how?
    Cheers.
    Satish

    I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
    CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
    The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
    I hope this can help

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • Command for "How to find Cursor Size" in Oracle Stored Procedure"

    Hi
    Can u tell me....
    How to find Cursor Size" in Oracle Stored Procedure........
    I want command for that........

    why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
    This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
    Cheers, APC
    blog: http://radiofreetooting.blogspot.com
    .

  • __ Is there a way to adjust the key commands for switching channels in curves?

    __ Is there a way to adjust the key commands for switching channels in curves?
    By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
    There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
    Thanks,
    Hugh

    Hi,
    You can find the CS4 plug-in here:
    http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
    It's inline in tis post with some more background info:
    http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
    regards,
    steve

  • Key Command for "Go to Next Marker" doesn't work properly

    Hi there!
    While using Logic Pro 9.1.8 with Mountain Lion (10.8.2), it seems that the Key Command for "Go to Next/Previous Marker" doesn't work properly.
    The only effect is, that a grey rectangle moves in the top of the Arrange Area while ignoring the Markers itself.
    Any suggestions to solve it or is it me that is misbehaving?
    Cheers, GJ

    Hi
    The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
    Default KC are Control Command +Arrow Left/right
    Step 1: check you are using the correct key command :-)
    CCT

  • Key Command for Option Clicking a Marker

    Option Clicking a Marker does just what I want. It sets the playhead to the beginning of that marker without selecting the marker. Now if I could make the Keypad behave the same way, I could save myself a lot of damage to my Marker tracks. Right now a keypad # selects the marker, moves the playhead to it and sets the locators around it. preferences to make this more granular would be welcome.
    The option keypad numbers seem to be unused in the default key commands. Perhaps the option key could be set to trigger the same behaviour as option clicking a marker. it makes it intuitive (meaning I tried it.)

    The only way I can think of is to use a Macro app like QuicKeys assigning a KeyStrokes to a sequence of two key commands:
    For example:
    ctr+opt+cmd+1 triggers 1 (go to Marker 1) followed by sh+opt+D (Deselect All)
    ctr+opt+cmd+2 triggers 2 (go to Marker 2) followed by sh+opt+D (Deselect All)
    ctr+opt+cmd+3 triggers 3 (go to Marker 3) followed by sh+opt+D (Deselect All)
    You can assign the QuickKeys commands (ctr+opt+cmd+1, etc) to the keypads and they will move the Playhead to that Marker and selects the Marker. However, QuicKeys sends the second KeyCommand right away and deselects the Marker.
    No deleting of selected Marker by accident anymore.
    The KeyCommands in Logic are already very powerful, but when combined with QuicKeys (or any other Macro app) that lets you fire up a sequence of KeyCommands or mouse click on specific areas on the Logic interface per key commands, then it gets really powerful. Combine that with multi-touch gestures on your TrackPad using the amazing BetterTouchTool app, an you can take your customized workflow to a whole new level.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • User command for checkbox in alv grid output

    Hi,
    Does anyone knows the user command for checkbox in alv grid display. My requirement is to have a column for checkbox in alv output. When the user checks the checkbox, a pop-up dialog box will appear. This dialog box was created in screen painter. I can't find the user command for this. Please help.
    Thanks in advance.

    Hi,
    there r two ways for creating checkbox col on the ALV grid.
    1.)  take an extra field in your internal table i.e 
    data:
       checkbox type c.
    loop at internal_table into wa.
    checkbox.
    endloop.
    or
    the fieldcatalog attribute
    2.) wa_fcat-checkbox = 'X'.
    append wa_fcat to t_fcat.
    clear wa_fcat.
    if itab-checkbox = 'X'.
    call screen <dialogbox screen number>.
    endif.
    regards
    ravi

  • Printer go off when we give command for print

    when ever we give command for print of adobe file it shows printer not attach to computer

    Welcome to the Adobe Forums.
    The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information where applicable:
        •    Adobe product and version number
        •    Operating system and version number
        •    Browser and version number (where applicable)
        •    The full text of any error message(s)
        •    What you were doing when the problem occurred
        •    Screenshots of the problem (if possible)
        •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • [svn:bz-trunk] 21277: Added ds-console source to package-oem and removed copy command for datavisualization .swc which doesn't exist in the specified location.

    Revision: 21277
    Revision: 21277
    Author:   [email protected]
    Date:     2011-05-18 11:35:28 -0700 (Wed, 18 May 2011)
    Log Message:
    Added ds-console source to package-oem and removed copy command for datavisualization.swc which doesn't exist in the specified location. I do not find it in the most recent package-oem.zip neither
    Modified Paths:
        blazeds/trunk/build.xml

    Gusar wrote:No, it's not. I have actually seen cases where software rendering gave a higher glxgears score than hardware rendering (and no, it wasn't about vsync). Of course, with *actual* apps on the same machine, software rendering sucked compared to hardware rendering.
    Please do not jump to conclusions and make assumptions here like 'when will people finally get it??'.  I never said it was a benchmark.  I have also seen many examples of where it's results do not go with conventional performance.  I have a Radeon 9000 that goes faster on glxgears than a Geforce FX 5600 running Nouveau.  Which is the faster card?  The FX by miles.  It is not a benchmark as it can not be compared between configurations.  What I know is that on this individual system, from prior experience over many years when 3D acceleration is working glxgears gets between 300 and 400 fps.  When it is not working it gets less than 10.  That is a fact but does not mean it is benchmarkable.  Yes, a Quake 3 timedemo (I have these numbers too and they very much correlate to glxgears performance for this system given just how slow it is) would be a benchmark but when it runs less than 0.1fps and even the 2D rendering means that navigating the menu is impossible, there just isn't the time to find out.  Hence if playing around with drivers on this system I would use glxgears to check that 3D acceleration is working but not to benchmark.  Glxinfo does not give you all this evidence.
    But to clarify, I wouldn't use glxgears as a benchmark, benchmarking is different and I do a lot of that too.

  • How to run the the impersonation permission grant command for multiple users

    I have run below command earlier to grant the impersonation for a user called user1
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    Now I want to run this command for multiple users like user2, user3, user 4 together. How should I run the command.
    This is for Exchange Server 2007 SP2
    Abhijeet M. Mohite

    Hi Abhijeet
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    I am little bit confused with this command so can you please help me what to right inplace of User1 and domainname\service application user
    Example: I wanted to give Impersonate rights to
    [email protected] then can you please complete command for me.      Thanks in advance.
    Warm Regards, Pramod Kumar Singh Manager-IT

  • Can't Change Labels for Properties

    I Can't Change Labels for predefine Properties
    or Custom Properties.
    I had done it with this:
    http://help.sap.com/saphelp_erp2004/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
    I just followed what the help said.
    but i can't see any change for my label of Properties.
    I had done it as follow steps.Please help me to
    Check if i miss some steps!
    1,I creat .properties files
      mylabels.properties
       in this properties file  i creat a key
           modified=date
      mylabels_zh_CN.properties
        in this properties file  i creat a key
           modified=u66F4u65B0u65E5u671F
    2,I made a jar file use the two .properties files
      named mybunding.jar
    3,I copy this jar file to
    .../j2ee/cluster/server<n>/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.km.common.resourcebundle/lib
    4, Create a new metadata extension under Content Management -> Global Services -> Property Metadata -> Metadata Extensions.
      named it  my_metadatae_extension
       set  Bundle File=com.sap.km.common.resourcebundle.mybunding.mylabels
    5,restart the servlet engine,
    6 in the key for label of the properties
        i set modified the key i creat in step 1.
    when i display the properties it still didn,t display
    my created lable.
    How should i do? any step i miss? or any better solution
    for the lable?
    Please help me ,
    BestRegards
    Han

    Hi Han,
    here my corrections:
    1.
    I would use the filename "mylabels_cn.properties" and not "mylabels_zh_CN.properties"
    2.&3.
    This is the SP2 way for using the bundle files for properties. For NetWeaver you need to create a new PAR-file with the bundle file including the labels and translations as described <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm">here</a>.
    It's very easy if you use the example PAR file provided by SAP in SAP Note 817876, as mentioned in the referenced link (Prerequisites section).
    Read carefully the process in the link and try again. If you still experience problems, come back with the new detailed description.
    Hope this helps,
    Robert

  • Key command for cleaning HD

    Is there a 2 key step command for cleaning HD ?

    No, thank heavens! That would invite accidents!
    Why do you want to 'clean' your hard drive?

Maybe you are looking for