Command 'H' doesn't always hide Dreamweaver app

Such a useful shortcut but it seems very sporadic in the way that it works since the update to CS6. Sometimes it hides the app and sometimes it just does nothing. Used to work fine.

Sort-of related issue: I feel DW CS5 already hides too much, so I would never be tempted to use Command-H. For me, DW's windows completely disappear when I switch focus to the Finder or another app. This makes documenting procedures (or bugs) in DW particularly hard. The only work-around I've found so far is to use a timed screen Grab. The only way to see DW windows and write about them, say, in TextEdit. It is also inconsistent with the behavior of most Mac apps in general.
I've been unsuccessful finding any clues about how to disable this behavior, so --clutching at straws-- I'm hoping that people who actually seek it might know more.
Hmmm, if DW includes a "Hide Dreamweaver" command, is it kind of weird that this function occurs automatically as well, without (so far as I've found) any user option to disable it?
OK, you folks are talking about CS6. Maybe DW has changed significantly in this area. But maybe not.
TIA

Similar Messages

ITunes 10.4.1 Problem with Key Command Go to Current Song - Doesn't always work

Since updating to iTunes 10.4.1, I've noticed that the key command, command + L doesn't always work to display the current song.

I have this problem in iTunes 10.7 (21). The "Go to Current Song" option exists in the Controls menu, but even when audio is playing it is disabled.

Command-Option-H not working to hide other apps

Just got a new (refurbished) iMac, with 10.8.3 on it. Transferred everyting from my old iMac without a hitch. There's a weird thing happnening, however. Command-Option-H no longer hides others. It seems to cycle through open apps. But only some of them. So right now I'm in Crome and press the shortcut. It switches to the Finder (with everything else hidden). Then with the Finder up front, I press the keys again, and it goes to Calculator, and hides all the others. I press the keys one more time and nothing happens. But the thing is, I have several other apps open, and it doesn't cycle through those.
The machine is a 3.2 GHz Intel Core i5, with 10.8.3. I am using my old full-sized keyboard, with a wired mighty Mouse (didn't like the tiny Bluetooth keyboard it came with, nor the Magic Mouse).
I've searched and can't find a solution - heck, I can't even find anybody else having this issue.

I think I see some things I don't need to have running, like Adobe Version Cue CS2. Here's the full report – interpret away! Thanks!
Hardware Information:
          iMac (27-inch, Late 2012)
          iMac - model: iMac13,2
          1 3.2 GHz Intel Core i5 CPU: 4 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce GTX 675MX - VRAM: 1024 MB
Startup Items:
          AdobeVersionCueCS2 - Path: /Library/StartupItems/AdobeVersionCueCS2
          ProTec6b - Path: /Library/StartupItems/ProTec6b
System Software:
          OS X 10.8.4 (12E55) - Uptime: 0 days 12:38:6
Disk Information:
          APPLE HDD ST1000DM003 disk0 : (1 TB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 999.35 GB (612.33 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Western Digital My Book 111A 2 TB
                    disk2s1 (disk2s1) <not mounted>: 32 KB
                    My Book (disk2s3) /Volumes/My Book: 1 TB (560.49 GB free)
                    Time Machine MyBook (disk2s5) /Volumes/Time Machine MyBook: 999.98 GB (620.97 GB free)
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple, Inc. Keyboard Hub
                    Mitsumi Electric Apple Optical USB Mouse
                    Apple, Inc Apple Keyboard
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          com.Cycling74.driver.Soundflower          (1.6.2)
          net.telestream.driver.TelestreamAudio          (1.0.5)
Problem System Launch Daemons:
          [failed] com.apple.coreservices.appleid.passwordcheck.plist
          [failed] com.apple.coresymbolicationd.plist
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [failed] com.apple.accountsd.plist
          [failed] com.apple.AirPlayUIAgent.plist
          [failed] com.apple.coreservices.appleid.authentication.plist
          [failed] com.apple.gamed.plist
          [failed] com.apple.printtool.agent.plist
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [loaded] com.barebones.authd.plist
          [not loaded] com.barebones.textwrangler.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.rogueamoeba.hermes.plist
          [not loaded] org.eyebeam.SelfControl.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS4ServiceManager.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.wacom.wacomtablet.plist
User Launch Agents:
          [loaded] ws.agile.1PasswordAgent.plist
User Login Items:
          iTunesHelper
          Spotify
          Dropbox
          Snapz Pro X
          TextExpander 2
          Desktopple
          Cloud
          Google Chrome
3rd Party Preference Panes:
          A Better Finder Preferences
          Adobe Version Cue CS2
          BTTPrefs
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          WacomTablet
Internet Plug-ins:
          AdobeAAMDetect.plugin
          AdobePDFViewer.plugin
          AmazonMP3DownloaderPlugin.plugin
          AmazonMP3DownloaderPlugin1017277.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
          Yahoo! Installer.plugin
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin.plugin
Bad Fonts:
          None
Top Processes by CPU:
              15%          firefox
               3%          WindowServer
               1%          Adobe Illustrator
               1%          Skype
               1%          EtreCheck
               1%          Google Chrome
               1%          Adobe Photoshop CS5
               1%          iTunes
               0%          fontd
               0%          DashboardClient
Top Processes by Memory:
          1.03 GB            Adobe Photoshop CS5
          836 MB             firefox
          238 MB             Adobe Illustrator
          213 MB             mds
          172 MB             Google Chrome
          149 MB             Google Chrome Helper
          139 MB             WindowServer
          131 MB             Skype
          131 MB             Finder
          66 MB              iTunes
Virtual Memory Statistics
          152 MB             Free RAM
          3.59 GB            Active RAM
          3.11 GB            Inactive RAM
          1.14 GB            Wired RAM
          4.14 GB            Page-ins
          819 MB             Page-outs

TS1702 How do I hide purchased apps with iOS 6? With iOS 5 you can swipe the unwanted app to hide it, but this doesn't work with iOS 6.

How can I hide an app from the list of purchased apps using iOS6? With iOS 5 you can swipe the icon to display a red Hide icon, but this doesn't work with iOS 6. Suggestions (that work) will be appreciated.

Yes. On a computer. Not ios6.
On iTunes on your computer under purchased, select the x on the top corner. That will hide them.

The iOS 7.0 do not hide the purchases in the app store. I always hide them from the macbook, but with iOS7 I can't do this

The iOS 7.0 do not hide the purchases in the app store. I always hide them from the macbook, but with iOS7 I can't do this

See my reply to your here : https://discussions.apple.com/message/23329266#23329266
After hiding them on your Mac's iTunes try logging out of your account on your phone and then log back into it.

"Put" command doesn't always work

Hi,
I'm looking for a confirmation that the put command doesn't
always work in DW8.
I don't use check in/out, so I have started to rely on the
Put command, rather than going in to Windows Explorer to copy and
paste web page changes from Local to Remote (via LAN). But even
when I know there are differences between the local and remote
file, the Put command will often report that the Local file was not
moved to the Remote location because DW thinks the Remote file is
the same as the Local. I get a log message like this:
"the file" - same - not transferred
But, I can confirm the local is newer than the remote by
manually copying and pasting. I can see a different timestamp and
file size in Windows Explorer.
Is this command "broken" in DW8?
Thanx,
Chris

> I'm looking for a confirmation that the put command
doesn't always work in
> DW8.
You won't get it from me. I have never had it fail since DW2.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ChrisRi" <[email protected]> wrote in
message
news:egg99f$2s3$[email protected]..
> Hi,
>
> I'm looking for a confirmation that the put command
doesn't always work in
> DW8.
>
> I don't use check in/out, so I have started to rely on
the Put command,
> rather
> than going in to Windows Explorer to copy and paste web
page changes from
> Local
> to Remote (via LAN). But even when I know there are
differences between
> the
> local and remote file, the Put command will often report
that the Local
> file
> was not moved to the Remote location because DW thinks
the Remote file is
> the
> same as the Local. I get a log message like this:
>
> "the file" - same - not transferred
>
> But, I can confirm the local is newer than the remote by
manually copying
> and
> pasting. I can see a different timestamp and file size
in Windows
> Explorer.
>
> Is this command "broken" in DW8?
>
> Thanx,
>
> Chris
>
>

Updated Ipod to ios 6 now apps close without warning and seems really slow also wifi doesn't always connect

Updated my ipod touch to ios6 now apps close without warning and seems really slow to repsond. Also doesn't always connect to the Wifi never had any problems before upgrade

Try a hard reboot (hold home and power buttons down at the same time until your iPod reboots). If that doesn't work, do a restore in iTunes and do not restore from backup. You wqill lose your game data and settings, but your iPod should run better and work properly.

Why Do the App Switcher and Dock Hide Running Apps?

I've come to realize—to my great annoyance—that the behavior of the command-tab app switcher has changed.
If I have an app launched that has no documents currently open, the app doesn't appear in the app switcher or the dock. The only way I can see it's open is by looking at DragThing, my third-party launcher. Since I return to Pages and Preview throughout the day, opening and closing documents as I need them, this is really an inconvenience for me.
Does anyone know of a way to disable this behavior and have both command-tab and the dock show all running apps the way it always did before Mavericks?

Because my dock's already too full with apps that are even more frequently used. Using the app switcher became part of my workflow long ago, and I'm sorry to lose it.

My USB mouse doesn't always start at boot.

After updating from Arch 0.7.1 to 0.8, one of the big pile of bugs I had was that my USB mouse doesn't always start at boot. In fact, when I start the computer, the red LED in the mouse lights up but sometimes it switches off after the menu where I can choose to use Arch linux or .. Arch linux.
So, the mouse switches off before I startx one time on two. When it happens I just deplug and replug it but I hate to do that.
Need some help.

dmesg when the mouse isn't working :
$ dmesg
Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease)
) #1 SMP PREEMPT Thu Jan 11 20:08:17 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
248MB LOWMEM available.
Entering add_active_range(0, 0, 63488) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63488
HighMem 63488 -> 63488
early_node_map[1] active PFN ranges
0: 0 -> 63488
On node 0 totalpages: 63488
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 464 pages used for memmap
Normal zone: 58928 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000ec010
ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec080
ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec0cc
ACPI: SSDT (v001 COMPAQ HAWA7K3 0x00000001 MSFT 0x0100000c) @ 0x000ec223
ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
Detected 901.637 MHz processor.
Built 1 zonelists. Total pages: 62992
Kernel command line: root=/dev/hda3 ro earlymodules=piix
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011fa000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data,
260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
.init : 0xc0405000 - 0xc0446000 ( 260 kB)
.data : 0xc0346806 - 0xc03fe64c ( 735 kB)
.text : 0xc0100000 - 0xc0346806 (2330 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 501k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c28)
CPU0: AMD Duron(tm) Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 80000000-800fffff
PREFETCH window: 88000000-8fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
3
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 260k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:14.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.101 (c) Dave Jones
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:14.3: UHCI Host Controller
uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0x90000000
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EC
P]
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:14.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xad
dr
vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - upg
rade BIOS or use force=1
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
5
eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
usbcore: registered new interface driver hiddev
usbhid: probe of 1-1:1.0 failed with error -71
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
lp0: using parport0 (interrupt-driven).
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Real Time Clock Driver v1.12ac
ppdev: user-space parallel port driver
EXT3 FS on hda3, internal journal
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
scsi 0:0:0:0: Direct-Access JetFlash TS256MJF110 0.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
3
[drm] Initialized savage 2.4.1 20050313 on minor 0
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
eth0: no IPv6 routers present
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
And here's the output of dmesg when the mouse works :
$ dmesg
Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
248MB LOWMEM available.
Entering add_active_range(0, 0, 63488) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63488
HighMem 63488 -> 63488
early_node_map[1] active PFN ranges
0: 0 -> 63488
On node 0 totalpages: 63488
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 464 pages used for memmap
Normal zone: 58928 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000ec010
ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec080
ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec0cc
ACPI: SSDT (v001 COMPAQ HAWA7K3 0x00000001 MSFT 0x0100000c) @ 0x000ec223
ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
Detected 901.637 MHz processor.
Built 1 zonelists. Total pages: 62992
Kernel command line: root=/dev/hda3 ro earlymodules=piix
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011fa000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
.init : 0xc0405000 - 0xc0446000 ( 260 kB)
.data : 0xc0346806 - 0xc03fe64c ( 735 kB)
.text : 0xc0100000 - 0xc0346806 (2330 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 501k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c28)
CPU0: AMD Duron(tm) Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 80000000-800fffff
PREFETCH window: 88000000-8fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 260k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:14.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.101 (c) Dave Jones
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
uhci_hcd 0000:00:14.3: UHCI Host Controller
uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0x90000000
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,E
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IR
PCI: Setting latency timer of device 0000:00:14.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xa
vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - up
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
usbcore: registered new interface driver hiddev
usbhid: probe of 1-1:1.0 failed with error -71
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
lp0: using parport0 (interrupt-driven).
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Real Time Clock Driver v1.12ac
ppdev: user-space parallel port driver
EXT3 FS on hda3, internal journal
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
scsi 0:0:0:0: Direct-Access JetFlash TS256MJF110 0.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
[drm] Initialized savage 2.4.1 20050313 on minor 0
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
eth0: no IPv6 routers present
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-1: USB disconnect, address 2
usb 1-2: USB disconnect, address 3
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /class/input/input2
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:14.2-1

Keyboard shortcut Command-~ DOES NOT WORK in/on some apps/machines

It seems that in Mac OS 10.6.2 the keyboard shortcut "Command-~" ( a.k.a.
"⌘-~" or "Command-tilde") is quite fickle. It is used in most apps to
switch between open windows within an application. It was available in OS
10.5 in Safari, Microsoft Office (including Entourage), and most other apps
with the capacity to open multiple windows simultaneously. But in OS 10.6.2
this shortcut is available in Safari on my 2.16 GHz Core2Duo 20" iMac but
NOT on my 2.4 GHz Core2Duo Unibody 13" MacBook; it's available in Entourage
on my MacBook but NOT on my iMac. So it's available on some apps and some
machines but not on others, there's no rhyme or reason to it, and it's not
consistent between like machines and apps, which makes me think that there's
a system-wide preference or command that could turn this on and off. I
thought perhaps it was controlled by a preference in certain apps, but I
have found no such prefs. Is there a way to control this - in other words,
to make it available where it currently is not? Or is there a command to
make it universally available on any 10.6 machine (my preferred solution)?
Thanks for any help offered.

Not a reply to this specific question, just a quasi-relevant comment that might help some folks.
In Leopard, and with (for example) English and Russian chosen in System Prefs under "Language" and the keyboard shortcut set to command+space, I would always see the flag change in the menu bar as soon as command+space were chosen. Now, under Snow Leopard, hitting command+space seems not to make the change. But it does make the change, you just need to take your fingers off the keys first, then the flag will change.

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

How to always hide the SQL statements for users when they run User Queries?

Hi,
from the IT dept. position, I don't want users to see and be so curious about the SQL commands.
How can I always hide the textbox of Display Query Structure?
thanks.

Hi,
Unfortunately system design has short of this function. If users are allowed to run those queries, you can not hide the query structure.
You may post a DRQ here: /community [original link is broken]
Thanks,
Gordon

Command q doesn't work

command q no longer seems to work for me. it doesn't quit from any of the applications. (tried it in safari, firefox and a other apps)
command w doesn't close the tab. command n doesn't open a new window and the list goes on.
command a does work! selects all in the page.
the keys are all good, nothing wrong with the keyboard.
what/where can i check for the default behavior of these keys? i've tried resetting to defaults in the keyboard shortcuts under 'system preferences'.
help!

hmm, that's not it. thanks for your reply though.
i've switched to other programs (using command tab) and it doesn't work.
for example, right now, i have 'terminal', firefox, safari (and finder) running. i've switched to each of these programs and command q doesn't quit any of them. something is definitely hosed up.

Can I hide an app icon on the launchpad?

Can I hide an app so that it doesn't show up on the Launchpad?
Can I change the icon for an app?
Thanks!

If you have several such items in the Launchpad, you can combine them into a folder-type (collection) icon. To do that, just drag one of them on top of another; when the second one highlights, let go. You can add more icons to that same collection. To use one of the items in a collection, click the collection's icon and it will open a sub-field in Launchpad, from which you can select the item you want.

Hide Running Apps from Standard Users

Hello
How can i hide running apps from a standard user?
Ex
I would like to have team viewer running in the background so anytime i want i can administrate the mac ..But if the user quit from app i'm not able to log in.
So i'm thinking to make him unable to quit from the app either have the app running in the background..
Any ideas?
Thnx

Be aware that the major difficulty in using your own encryption routines is key management.
- If you store the key in the database, the DBA can obviously just call the appropriate decrypt routine, pass in the key, and see the data
- If you store the key outside the database but expose it somehow in a way the database can see, you've got the same problem.
- If you store the key outside the database in a way the database cannot access, then only the applications that know how to access the database and know how to access the key can decrypt the data. That can be annoying if you try to use a reporting package or other third party software that needs to see decrypted data and doesn't know how to decrypt the data. You'd also have to make sure that the DBA doesn't have access to whatever machine you're storing the key on for other reasons (i.e. because the DBA is the backup to the admin)
- If you don't store the key at all, you can force users to pass it in when they want to decrypt data. That obviously runs the risk that someone forgets the password because not enough people know it or that so many people know it that its no longer a secret.
- Plus, you have to deal with things like figuring out how you revoke/ change a key, how you synchronize backups of the database with backups of the key without DBA intervention, etc.
These tend to be much harder problems than figuring out how to encrypt the data on the way in.
Justin

Command 'H' doesn't always hide Dreamweaver app

Similar Messages

Maybe you are looking for