Command in a new window

Hi,
Is it possible to open the html editor in a new window when you click on the 'edit online' command ?
thanks in advance,
Alex

hi,
For opening object in a new window. You have to set the Work protect mode in the personalize tab.Set your options as needed.
One can also do this under System administration>system config>serviceconfig>epcfloader>workprotectmode.default.
here set the value as needed and restart the service epcfloader under administrate.(right click"Administrate".
Regards,
Akshay
Reward if helpful.

Similar Messages

Command-T opens new window not new Tab with Snow Leopard

Does anyone else have this issue? Command-T opens new window not new Tab with SL.
And yes all my settings are correct!!

Greetings,
If your preferences for Tabs are correctly set (the top two checkboxes are checked) and it's still opening a new window, then it would seem your preferences may be corrupt. In that case, you should quit Safari, go to Home/Library/Preferences and delete the com.apple.Safari.plist file.
Then restart Safari, setup your preferences again, and test to see if it works.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

Option/command does not open a new window from bookmarks

I have an occasional problem: how come sometimes a bookmarked link in Safari does not open in a new window when I click option/command. or even shift/option/command. I have had and still have this issue over the last few iterations of OS X and Safari. Does not do it for all bookmarks just a few.

OK. A couple of other things to try in that case.
It may just be a corrupt preference file causing the issue, so quit Safari, trash this file and then restart Safari:
Hard drive > Users > Your Username > Library > Preferences > com.apple.Safari.plist
If that makes no difference, does it behave correctly when used from another user account on the same machine? If you don't have another account then use System Preferences > Accounts > \[+\] to create a temporary one for testing.

Command click in Yosemite does not open a new window

Command click in Yosemite does not open a new window. ??

Is the checkbox in this screenshot checked for your Finder preferences. If so uncheck it and try again.

Ff4: Command + N (and File "New Window") is not working

Choosing File->New Window or Command+N do nothing. The File menu flashes but no new window is created.
(Happens in Safe Mode too.)

It works fine when I modified the 'loadSet' attribute to 'loadset' where all letters are in small case.
Thank You.

I'm using FF for Mac 3.6.13 and everytime I open a new window or tab the image of what I see is tiny which requires me to click Command + to enlarge it. The actual page is normal size, but its the image of the page that opens tiny.

I'm using FF for Mac 3.6.13 and every time I open a new window or tab the image of what I see is tiny which then requires me to click Command + to enlarge it about 4 or 5 times. The actual page is normal size, but its the image (what I see) of the page that is tiny.

Thanks but Command 0 on a Mac only makes a temporary change to that one page. The link you provided doesn't show how to make a permanent change. Do you know how to permanently change this so I don't have to do it to every new page?
Thank you.

Simply put, I do not like like the new color coding "dots" and I do not like having to press the Command key before double clicking to open files in a new window. How hard would have been to include the old version of these two features?

Simply put, I do not like like the new color coding "dots" and I do not like having to press the Command key before double clicking to open files in a new window. How hard would have been to include the old version of these two features?

Apple - Mac OS X - Feedback

Command click to open new window not working

Command clicking my favorites in Safari does not open them in a new window.
"Command + Click opens a link in a new tab" is checked under "Tabs" in the preferences plane.
MacBook Pro (17-inch)
OS X (10.10.2)
Safari (Version 8.0.4)
Any help would be appreciated.

Hello Eric,
Thanks for the prompt reply and suggestion.
Unfortunately command - option/alt - click doesn't do it either.

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

UI Mass Command opening new window

Hi all,
I need your help. I would like to create new UI Mass Command which will open new IE window.
For better understanding of my problem:
I've created UI Mass Command which take selected resources and add them to ZIP archive. The final ZIP stream I store to a static class. Then I create servlet which loads the ZIP stream from the static class and offer it to user for downloading. But I need modify the command to be able call the servlet in new window.
Do you have any idea how to do that? Thank you in advance for any reply!
Regards
Zbynek

Hi Zbynek ,
You need to implement a class which extends AbstractCommand class and in the method getLinkAttributes() you can return the link that should be executed when user click the UICommand.
Check this to know, how to implement UICommand:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Flexible%20UI%20One-Step-Screenflow.article
Here is getLinkAttributes implementation:
public LinkAttributes getLinkAttributes() {
        try {
            String path = getResource().getRID().getPath();
               String irjString = pcr.getServletRequest().getContextPath();
               String linkRef = irjString + "/servlet/prt/portal/prtroot/YourComponent";
            return new LinkAttributes(
                "javascript:me.window.open('"
                    + linkRef
                    + "?path="
                    + path
                    + "', 'myWin_"
                    + System.currentTimeMillis()
                    + "', 'left=250, top=250, toolbar=no,status=no,menubar=no,resizable=yes,scrollbars=yes,width=700,height=350');",
                "_top",
                true);
        } catch (ResourceException e) {
            log.severe(e, "Operation failed");
            return null;
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Open a new window while clicking on the command button

Hi,
Can I open a pdf report in a new window when adf command button is clicked?
I am using jdev11g
Thanks

Hi John,
I found the goButton's destination expression do not read value from any controls e.g.: Input Text.
Is there anyway to read some value, that input by user not in the db, on the screen?
e.g.: I have a Input Text for user to input a date to print the report. I've tried to binding the control in backingBean, but I get a null value from the goButton's destination function.
the jspx:
<af:inputText label="Search" id="it1"
                        value="#{backingBeanScope.backing_goUrl.it1Value}" autoSubmit="true"/>
<af:goButton text="goButton 1" id="gb1" targetFrame="_blank"
                       destination="#{backingBeanScope.backing_goUrl.searchURL}"/>in the backing bean:
public class GoUrl {
private String it1Value;
public String getIt1Value() {
    return it1Value;
public void setIt1Value(String it1Value) {
    this.it1Value = it1Value;
public String getSearchURL() {
    String s = getIt1Value();
    return "http://www.google.com/search?hl=zh-tw&q="+s; // the result of s is always null.
}Cheers,
Samson Fu
Edited by: Samson Fu on Aug 31, 2010 1:46 PM

Command in a new window

Similar Messages

Maybe you are looking for